SKL stage 1 part 4 - loose ends
Subsystems (2)
cover SKL stage 1 part 4 - loose ends
A few misc patches for SKL. Two caveats:
- drm/i915/skl: Use correct use counters for force wakes
This patch fixes a problem, is reviewed, but there's a better solution being proposed. The better solution doesn't seem to be ready just yet, so we could have just gone with that since the beginning.
- Let's hope future platforms will use the same WM code as SKL
Is hopefully straightforward enough for a pass-by r-b from Daniel
Thanks,
Signature · 32 lines
Damien Damien Lespiau (3): drm/i915/skl: Implement queue_flip drm/i915: Clear PCODE_DATA1 on SNB+ drm/i915: Let's hope future platforms will use the same WM code as SKL Jesse Barnes (2): drm/i915/skl: fetch, enable/disable pfit as needed v2 drm/i915/skl: AUX irqs have moved Michael H. Nguyen (1): drm/i915/skl: Add Gen9 LRC size Tvrtko Ursulin (1): drm/i915/skl: Use correct use counters for force wakes drivers/gpu/drm/i915/i915_irq.c | 17 +++-- drivers/gpu/drm/i915/i915_reg.h | 27 +++++++- drivers/gpu/drm/i915/intel_display.c | 128 +++++++++++++++++++++++++++++++++-- drivers/gpu/drm/i915/intel_lrc.c | 25 +++++-- drivers/gpu/drm/i915/intel_pm.c | 5 +- 5 files changed, 185 insertions(+), 17 deletions(-) -- 1.8.3.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 1/7 drm/i915/skl: Implement queue_flip
A few bits have changed in MI_DISPLAY_FLIP to accomodate the new planes. DE_RRMR seems to have kept its plane flip bits backward compatible.
v2: Rebase on top of nightly
v3: Rebase on top of nightly (minor conflict in i915_reg.h)
v4: Remove code that is now part of intel_crtc_page_flip()
Don't use BUG() in default:
Use intel_crtc->unpin_work->gtt_offset
(Paulo)--- drivers/gpu/drm/i915/i915_reg.h | 10 ++++++ drivers/gpu/drm/i915/intel_display.c | 66 ++++++++++++++++++++++++++++++++++++ 2 files changed, 76 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +10 -0
@@ -248,6 +248,16 @@#define MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19)#define MI_DISPLAY_FLIP_IVB_PLANE_C (4 << 19)#define MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19) +/* SKL ones */ +#define MI_DISPLAY_FLIP_SKL_PLANE_1_A (0 << 8) +#define MI_DISPLAY_FLIP_SKL_PLANE_1_B (1 << 8) +#define MI_DISPLAY_FLIP_SKL_PLANE_1_C (2 << 8) +#define MI_DISPLAY_FLIP_SKL_PLANE_2_A (4 << 8) +#define MI_DISPLAY_FLIP_SKL_PLANE_2_B (5 << 8) +#define MI_DISPLAY_FLIP_SKL_PLANE_2_C (6 << 8) +#define MI_DISPLAY_FLIP_SKL_PLANE_3_A (7 << 8) +#define MI_DISPLAY_FLIP_SKL_PLANE_3_B (8 << 8) +#define MI_DISPLAY_FLIP_SKL_PLANE_3_C (9 << 8)#define MI_SEMAPHORE_MBOX MI_INSTR(0x16, 1)/* gen6, gen7 */ #define MI_SEMAPHORE_GLOBAL_GTT (1<<22)#define MI_SEMAPHORE_UPDATE (1<<21)
drivers/gpu/drm/i915/intel_display.c +66 -0
78 lines not on this page · raw message
Signature · 6 lines
1.8.3.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/7 drm/i915/skl: fetch, enable/disable pfit as needed v2
In reply to Damien LespiauFrom: Jesse Barnes <[email protected]>
This moved around on SKL, so we need to make sure we read/write the correct regs.
v2: fixup WIN_POS offsets (Paulo)
zero out WIN_POS reg at disable time (Paulo)
--- drivers/gpu/drm/i915/i915_reg.h | 12 +++++++ drivers/gpu/drm/i915/intel_display.c | 62 +++++++++++++++++++++++++++++++++--- 2 files changed, 70 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +12 -0
@@ -4916,6 +4916,18 @@ enum punit_power_well {#define PF_VSCALE (pipe) _PIPE(pipe, _PFA_VSCALE, _PFB_VSCALE)#define PF_HSCALE (pipe) _PIPE(pipe, _PFA_HSCALE, _PFB_HSCALE) +#define _PSA_CTL 0x68180 +#define _PSB_CTL 0x68980 +#define PS_ENABLE (1<<31) +#define _PSA_WIN_SZ 0x68174 +#define _PSB_WIN_SZ 0x68974 +#define _PSA_WIN_POS 0x68170 +#define _PSB_WIN_POS 0x68970 + +#define PS_CTL (pipe) _PIPE(pipe, _PSA_CTL, _PSB_CTL) +#define PS_WIN_SZ (pipe) _PIPE(pipe, _PSA_WIN_SZ, _PSB_WIN_SZ) +#define PS_WIN_POS (pipe) _PIPE(pipe, _PSA_WIN_POS, _PSB_WIN_POS) +/* legacy palette */ #define _LGC_PALETTE_A 0x4a000#define _LGC_PALETTE_B 0x4a800
drivers/gpu/drm/i915/intel_display.c +58 -4
98 lines not on this page · raw message
Signature · 6 lines
1.8.3.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 3/7 drm/i915/skl: AUX irqs have moved
In reply to Damien LespiauFrom: Jesse Barnes <[email protected]>
Use the new AUX port irq bits where needed.
v2: Rebase on top of upstream changes
v3: Rebase on top of Oscar change to write IIR as soon as possible (Damien)
v4: Rebase on top of the for_each_pipe() change adding dev_priv as first
argument (Damien)
--- drivers/gpu/drm/i915/i915_irq.c | 17 +++++++++++++---- drivers/gpu/drm/i915/i915_reg.h | 3 +++ 2 files changed, 16 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_irq.c +13 -4
@@ -2221,6 +2221,11 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)irqreturn_t ret =IRQ_NONE ;uint32_t tmp =0 ;enum pipe pipe; +u32 aux_mask =GEN8_AUX_CHANNEL_A ; + +if (IS_GEN9 (dev)) + aux_mask |=GEN9_AUX_CHANNEL_B |GEN9_AUX_CHANNEL_C | +GEN9_AUX_CHANNEL_D ; master_ctl =I915_READ (GEN8_MASTER_IRQ ); master_ctl &= ~GEN8_MASTER_IRQ_CONTROL ;
@@ -2253,7 +2258,8 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)if (tmp) {I915_WRITE (GEN8_DE_PORT_IIR , tmp); ret =IRQ_HANDLED ; -if (tmp &GEN8_AUX_CHANNEL_A ) + +if (tmp & aux_mask)dp_aux_irq_handler (dev);else DRM_ERROR ("Unexpected DE Port interrupt\n" );
@@ -3487,11 +3493,14 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)uint32_t de_pipe_masked =GEN8_PIPE_CDCLK_CRC_DONE ;uint32_t de_pipe_enables;int pipe; +u32 aux_en =GEN8_AUX_CHANNEL_A ; -if (IS_GEN9 (dev_priv)) +if (IS_GEN9 (dev_priv)) { de_pipe_masked |=GEN9_PIPE_PLANE1_FLIP_DONE |GEN9_DE_PIPE_IRQ_FAULT_ERRORS ; -else + aux_en |=GEN9_AUX_CHANNEL_B |GEN9_AUX_CHANNEL_C | +GEN9_AUX_CHANNEL_D ; + }else de_pipe_masked |=GEN8_PIPE_PRIMARY_FLIP_DONE |GEN8_DE_PIPE_IRQ_FAULT_ERRORS ;
@@ -3509,7 +3518,7 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv) dev_priv->de_irq_mask[pipe], de_pipe_enables); -GEN5_IRQ_INIT (GEN8_DE_PORT_ , ~GEN8_AUX_CHANNEL_A ,GEN8_AUX_CHANNEL_A ); +GEN5_IRQ_INIT (GEN8_DE_PORT_ , ~aux_en, aux_en); }static int gen8_irq_postinstall (struct drm_device *dev)
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -5072,6 +5072,9 @@ enum punit_power_well {#define GEN8_DE_PORT_IIR 0x44448#define GEN8_DE_PORT_IER 0x4444c#define GEN8_PORT_DP_A_HOTPLUG (1 << 3) +#define GEN9_AUX_CHANNEL_D (1 << 27) +#define GEN9_AUX_CHANNEL_C (1 << 26) +#define GEN9_AUX_CHANNEL_B (1 << 25)#define GEN8_AUX_CHANNEL_A (1 << 0)#define GEN8_DE_MISC_ISR 0x44460
Signature · 6 lines
1.8.3.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 4/7 drm/i915/skl: Add Gen9 LRC size
In reply to Damien LespiauFrom: "Michael H. Nguyen" <[email protected]>
The LRC increased in size on gen9. Make sure we return the right size in get_lr_context_size()
v2. Corrected the size, should be 22 pages. I unintentionally mailed out a test patch w/ size equaling 23 pages.
--- drivers/gpu/drm/i915/intel_lrc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_lrc.c +6 -2
@@ -136,6 +136,7 @@#include <drm/i915_drm.h> #include "i915_drv.h" +#define GEN9_LR_CONTEXT_RENDER_SIZE (22 * PAGE_SIZE)#define GEN8_LR_CONTEXT_RENDER_SIZE (20 * PAGE_SIZE)#define GEN8_LR_CONTEXT_OTHER_SIZE (2 * PAGE_SIZE)
@@ -1671,11 +1672,14 @@ static uint32_t get_lr_context_size(struct intel_engine_cs *ring) {int ret =0 ; -WARN_ON (INTEL_INFO (ring->dev)->gen !=8 ); +WARN_ON (INTEL_INFO (ring->dev)->gen <8 );switch (ring->id) {case RCS : - ret =GEN8_LR_CONTEXT_RENDER_SIZE ; +if (INTEL_INFO (ring->dev)->gen >=9 ) + ret =GEN9_LR_CONTEXT_RENDER_SIZE ; +else + ret =GEN8_LR_CONTEXT_RENDER_SIZE ;break ;case VCS :case BCS :
Signature · 6 lines
1.8.3.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 5/7 drm/i915: Clear PCODE_DATA1 on SNB+
In reply to Damien LespiauVille found out that the DATA1 register exists since SNB with some scarce apparitions in the specs throughout the times. In his own words:
Also according to Bspec the mailbox data1 register already existed since snb. The hsw cdclk change sequence also mentions that it should be set to 0, but eg. the bdw IPS sequence doesn't mention it. I guess in theory some pcode command might cause it to be clobbered, so I'm thinking we should just explicitly set it to 0 for all platforms in the pcode read/write functions
--- drivers/gpu/drm/i915/i915_reg.h | 2 +- drivers/gpu/drm/i915/intel_pm.c | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +1 -1
@@ -6041,8 +6041,8 @@ enum punit_power_well {#define GEN6_PCODE_DATA 0x138128#define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8#define GEN6_PCODE_FREQ_RING_RATIO_SHIFT 16 +#define GEN6_PCODE_DATA1 0x13812C -#define GEN9_PCODE_DATA1 0x13812C#define GEN9_PCODE_READ_MEM_LATENCY 0x6#define GEN9_MEM_LATENCY_LEVEL_MASK 0xFF#define GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT 8
drivers/gpu/drm/i915/intel_pm.c +1 -2
@@ -7164,8 +7164,7 @@ int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u8 mbox, u32 *val) }I915_WRITE (GEN6_PCODE_DATA , *val); -if (INTEL_INFO (dev_priv)->gen >=9 ) -I915_WRITE (GEN9_PCODE_DATA1 ,0 ); +I915_WRITE (GEN6_PCODE_DATA1 ,0 );I915_WRITE (GEN6_PCODE_MAILBOX ,GEN6_PCODE_READY | mbox); if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
Signature · 6 lines
1.8.3.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 6/7 drm/i915/skl: Use correct use counters for force wakes
In reply to Damien LespiauFrom: Tvrtko Ursulin <[email protected]>
Write and reads following the block changed use engine specific use counters and unless that is matched here force wake use counting goes bad. Same force wake is attempted to be taken twice which leads to at least time outs.
NOTE: Depending on feedback from hardware designers it may not be necessary to grab force wakes on Gen9 here. But for Gen8 it is needed due to a race between RC6 and ELSP writes.
v2: Added blitter force wake engine and made more future proof.
Added commit note.
--- drivers/gpu/drm/i915/intel_lrc.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_lrc.c +14 -3
@@ -276,7 +276,8 @@ static void execlists_elsp_write(struct intel_engine_cs *ring,struct drm_i915_gem_object *ctx_obj0, struct drm_i915_gem_object *ctx_obj1) { - struct drm_i915_private *dev_priv = ring->dev->dev_private; + struct drm_device *dev = ring->dev; +struct drm_i915_private *dev_priv = dev->dev_private;uint64_t temp =0 ;uint32_t desc[4 ];unsigned long flags;
@@ -301,13 +302,18 @@ static void execlists_elsp_write(struct intel_engine_cs *ring,* Instead, we do the runtime_pm_get/put when creating/destroying requests. */ spin_lock_irqsave (&dev_priv->uncore.lock, flags); -if (IS_CHERRYVIEW (dev_priv->dev)) { +if (IS_CHERRYVIEW (dev) ||INTEL_INFO (dev)->gen >=9 ) {if (dev_priv->uncore.fw_rendercount++ ==0 ) dev_priv->uncore.funcs.force_wake_get (dev_priv,FORCEWAKE_RENDER );if (dev_priv->uncore.fw_mediacount++ ==0 ) dev_priv->uncore.funcs.force_wake_get (dev_priv,FORCEWAKE_MEDIA ); +if (INTEL_INFO (dev)->gen >=9 ) { +if (dev_priv->uncore.fw_blittercount++ ==0 ) + dev_priv->uncore.funcs.force_wake_get (dev_priv, +FORCEWAKE_BLITTER ); + } }else {if (dev_priv->uncore.forcewake_count++ ==0 ) dev_priv->uncore.funcs.force_wake_get(dev_priv,
@@ -326,13 +332,18 @@ static void execlists_elsp_write(struct intel_engine_cs *ring,/* Release Force Wakeup (see the big comment above). */ spin_lock_irqsave (&dev_priv->uncore.lock, flags); -if (IS_CHERRYVIEW (dev_priv->dev)) { +if (IS_CHERRYVIEW (dev) ||INTEL_INFO (dev)->gen >=9 ) {if (--dev_priv->uncore.fw_rendercount ==0 ) dev_priv->uncore.funcs.force_wake_put (dev_priv,FORCEWAKE_RENDER );if (--dev_priv->uncore.fw_mediacount ==0 ) dev_priv->uncore.funcs.force_wake_put (dev_priv,FORCEWAKE_MEDIA ); +if (INTEL_INFO (dev)->gen >=9 ) { +if (--dev_priv->uncore.fw_blittercount ==0 ) + dev_priv->uncore.funcs.force_wake_put (dev_priv, +FORCEWAKE_BLITTER ); + } }else {if (--dev_priv->uncore.forcewake_count ==0 ) dev_priv->uncore.funcs.force_wake_put(dev_priv,
Signature · 6 lines
1.8.3.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 7/7 drm/i915: Let's hope future platforms will use the same WM code as SKL
In reply to Damien LespiauGiven the history, there's some chance we'll keep the same WM code for a bit (previously, we were able to reuse the same WM code from ILK to BDW, so that sounds like a fair assumption).
--- drivers/gpu/drm/i915/intel_pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_pm.c +1 -1
@@ -7067,7 +7067,7 @@ void intel_init_pm(struct drm_device *dev)i915_ironlake_get_mem_freq (dev);/* For FIFO watermark updates */ -if (IS_GEN9 (dev)) { +if (INTEL_INFO (dev)->gen >=9 ) {skl_setup_wm_latency (dev); dev_priv->display.init_clock_gating = gen9_init_clock_gating;
Signature · 6 lines
1.8.3.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 7/7] drm/i915: Let's hope future platforms will
-------------------------------------Summary-------------------------------------
Platform: baseline_drm_intel_nightly_pass_rate->patch_applied_pass_rate
BYT: pass/total=291/291->291/291
PNV: pass/total=356/356->356/356
ILK: pass/total=372/372->370/372
IVB: pass/total=544/546->544/546
SNB: pass/total=423/425->424/425
HSW: pass/total=579/579->579/579
BDW: pass/total=433/435->434/435
-------------------------------------Detailed-------------------------------------test_platform: test_suite, test_case, result_with_drm_intel_nightly(count, machine_id...)...->result_with_patch_applied(count, machine_id)...
ILK: Intel_gpu_tools, igt_kms_flip_flip-vs-modeset-vs-hang-interruptible, PASS(4, M26M37) -> DMESG_WARN(1, M37)PASS(3, M37)
ILK: Intel_gpu_tools, igt_kms_setmode_invalid-clone-single-crtc, FAIL(6, M26)DMESG_FAIL(1, M26)TIMEOUT(30, M37M6M26)PASS(1, M26) -> TIMEOUT(4, M37)
IVB: Intel_gpu_tools, igt_gem_bad_reloc_negative-reloc, NSPT(8, M4M21M34M45)PASS(14, M21M34M4M45) -> NSPT(1, M34)PASS(3, M34)
IVB: Intel_gpu_tools, igt_kms_pipe_crc_basic_hang-read-crc-pipe-B, PASS(7, M4M34) -> TIMEOUT(1, M34)PASS(3, M34)
SNB: Intel_gpu_tools, igt_gem_concurrent_blit_gpuX-bcs-overwrite-source-forked, FAIL(1, M22)PASS(15, M35M22) -> PASS(4, M22)
BDW: Intel_gpu_tools, igt_gem_reset_stats_ban-bsd, DMESG_WARN(1, M30)PASS(18, M30M42M28) -> PASS(4, M30)
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 11 lines · Damien Lespiau
A few misc patches for SKL. Two caveats:
- drm/i915/skl: Use correct use counters for force wakes
This patch fixes a problem, is reviewed, but there's a better solution being proposed. The better solution doesn't seem to be ready just yet, so we could have just gone with that since the beginning.
- Let's hope future platforms will use the same WM code as SKL
Is hopefully straightforward enough for a pass-by r-b from Daniel
All merged, thanks for patches&review.
-Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx