mx6slevk: Simplify the return value of setup_fec()
PATCH 1/2 mx6slevk: Simplify the return value of setup_fec()
From: Fabio Estevam <[email protected]>
We can simply the return the value from enable_fec_anatop_clock() to make the code smaller and simpler.
Signed-off-by Fabio Estevam <[email protected]>
--- board/freescale/mx6slevk/mx6slevk.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
board/freescale/mx6slevk/mx6slevk.c +1 -6
@@ -230,16 +230,11 @@ int board_eth_init(bd_t *bis)static int setup_fec (void ) {struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR ; -int ret;/* clear gpr1[14], gpr1[18:17] to select anatop clock */ clrsetbits_le32 (&iomuxc_regs->gpr[1 ],IOMUX_GPR1_FEC_MASK ,0 ); - ret =enable_fec_anatop_clock (ENET_50MHz); -if (ret) -return ret; - -return 0 ; +return enable_fec_anatop_clock (ENET_50MHz); }#endif
Signature · 1 line
1.9.1
PATCH 2/2 mx6sxsabresd: Simplify the return value of setup_fec()
From: Fabio Estevam <[email protected]>
We can simply the return the value from enable_fec_anatop_clock() to make the code smaller and simpler.
Signed-off-by Fabio Estevam <[email protected]>
--- board/freescale/mx6sxsabresd/mx6sxsabresd.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
board/freescale/mx6sxsabresd/mx6sxsabresd.c +1 -6
@@ -119,7 +119,6 @@ static int setup_fec(void) {struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR ;struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR ; -int ret;int reg;/* Use 125MHz anatop loopback REF_CLK1 for ENET1 */
@@ -140,11 +139,7 @@ static int setup_fec(void) reg |=BM_ANADIG_PLL_ENET_REF_25M_ENABLE ;writel (reg, &anatop->pll_enet); - ret =enable_fec_anatop_clock (ENET_125MHz); -if (ret) -return ret; - -return 0 ; +return enable_fec_anatop_clock (ENET_125MHz); }int board_eth_init (bd_t *bis)
Signature · 1 line
1.9.1