Skip to contentSkip to conversation

i915 display refactoring (v2)

PATCH In review Matt Roper 3 participants 8 messages Nov 19, 2014

Subsystems (3)
lore
Share & tools
lore

Matt Roper

author
#0 lore raw

cover i915 display refactoring (v2)

Another iteration of the i915 display refactoring work in preparation for atomic. The last patchset was posted here:

        http://lists.freedesktop.org/archives/intel-gfx/2014-November/055702.html

This set incorporates the feedback from the last review and also adds an additional patch at the end to split the cursor commit code into separate prepare/commit steps (anything that can fail goes into commit). That split will help simplify the future patchset to convert i915 over to using the atomic plane helpers.

Gustavo Padovan (3):
drm: add helper to get crtc timings (v4) drm/i915: remove intel_crtc_cursor_set_obj() (v5) drm/i915: remove intel_pipe_set_base() (v4)

Matt Roper (2):
drm/i915: Don't store panning coordinates as 16.16 fixed point drm/i915: Introduce intel_prepare_cursor_plane()

 drivers/gpu/drm/drm_crtc.c           |  32 ++--
 drivers/gpu/drm/drm_modes.c          |  24 +--
 drivers/gpu/drm/i915/intel_display.c | 330 ++++++++++++-----------------------
 include/drm/drm_crtc.h               |   2 +
 include/drm/drm_modes.h              |   3 +
 5 files changed, 148 insertions(+), 243 deletions(-)
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#1 lore raw

PATCH 1/5 drm: add helper to get crtc timings (v4)

From: Gustavo Padovan <[email protected]>

We need to get hdisplay and vdisplay in a few places so create a helper to make our job easier.

v2 (by Matt): Use new stereo doubling function (suggested by Ville)

v3 (by Matt):
- Add missing kerneldoc (Daniel)
- Use drm_mode_copy() (Jani)

v4 (by Matt):
- Drop stereo doubling function again; add 'stereo only' flag to drm_mode_set_crtcinfo() instead (Ville)

---
 drivers/gpu/drm/drm_crtc.c           | 32 ++++++++++++++++++++++----------
 drivers/gpu/drm/drm_modes.c          | 24 ++++++++++++++----------
 drivers/gpu/drm/i915/intel_display.c |  6 +++---
 include/drm/drm_crtc.h               |  2 ++
 include/drm/drm_modes.h              |  3 +++
 5 files changed, 44 insertions(+), 23 deletions(-)
drivers/gpu/drm/drm_crtc.c +22 -10
index 56737e7..6202611 100644
@@ -2494,6 +2494,27 @@ int drm_mode_set_config_internal(struct drm_mode_set *set)
 EXPORT_SYMBOL(drm_mode_set_config_internal);
 
 /**
+ * drm_crtc_get_hv_timing - Fetches hdisplay/vdisplay for given mode
+ * @mode: mode to query
+ * @hdisplay: hdisplay value to fill in
+ * @vdisplay: vdisplay value to fill in
+ *
+ * The vdisplay value will be doubled if the specified mode is a stereo mode of
+ * the appropriate layout.
+ */
+void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
+			    int *hdisplay, int *vdisplay)
+{
+	struct drm_display_mode adjusted;
+
+	drm_mode_copy(&adjusted, mode);
+	drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE_ONLY);
+	*hdisplay = adjusted.crtc_hdisplay;
+	*vdisplay = adjusted.crtc_vdisplay;
+}
+EXPORT_SYMBOL(drm_crtc_get_hv_timing);
+
+/**
  * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
  *     CRTC viewport
  * @crtc: CRTC that framebuffer will be displayed on
@@ -2510,16 +2531,7 @@ int drm_crtc_check_viewport(const struct drm_crtc *crtc,
 {
 	int hdisplay, vdisplay;
 
-	hdisplay = mode->hdisplay;
-	vdisplay = mode->vdisplay;
-
-	if (drm_mode_is_stereo(mode)) {
-		struct drm_display_mode adjusted = *mode;
-
-		drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE);
-		hdisplay = adjusted.crtc_hdisplay;
-		vdisplay = adjusted.crtc_vdisplay;
-	}
+	drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
 
 	if (crtc->invert_dimensions)
 		swap(hdisplay, vdisplay);
drivers/gpu/drm/drm_modes.c +14 -10
index 6d8b941..fd5479b 100644
@@ -765,18 +765,22 @@ void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags)
 		}
 	}
 
-	if (p->flags & DRM_MODE_FLAG_DBLSCAN) {
-		p->crtc_vdisplay *= 2;
-		p->crtc_vsync_start *= 2;
-		p->crtc_vsync_end *= 2;
-		p->crtc_vtotal *= 2;
+	if (!(adjust_flags & CRTC_NO_DBLSCAN)) {
+		if (p->flags & DRM_MODE_FLAG_DBLSCAN) {
+			p->crtc_vdisplay *= 2;
+			p->crtc_vsync_start *= 2;
+			p->crtc_vsync_end *= 2;
+			p->crtc_vtotal *= 2;
+		}
 	}
 
-	if (p->vscan > 1) {
-		p->crtc_vdisplay *= p->vscan;
-		p->crtc_vsync_start *= p->vscan;
-		p->crtc_vsync_end *= p->vscan;
-		p->crtc_vtotal *= p->vscan;
+	if (!(adjust_flags & CRTC_NO_VSCAN)) {
+		if (p->vscan > 1) {
+			p->crtc_vdisplay *= p->vscan;
+			p->crtc_vsync_start *= p->vscan;
+			p->crtc_vsync_end *= p->vscan;
+			p->crtc_vtotal *= p->vscan;
+		}
 	}
 
 	if (adjust_flags & CRTC_STEREO_DOUBLE) {
drivers/gpu/drm/i915/intel_display.c +3 -3
index 320bf4c..a967623 100644
@@ -10158,9 +10158,9 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
 	 * computation to clearly distinguish it from the adjusted mode, which
 	 * can be changed by the connectors in the below retry loop.
 	 */
-	drm_mode_set_crtcinfo(&pipe_config->requested_mode, CRTC_STEREO_DOUBLE);
-	pipe_config->pipe_src_w = pipe_config->requested_mode.crtc_hdisplay;
-	pipe_config->pipe_src_h = pipe_config->requested_mode.crtc_vdisplay;
+	drm_crtc_get_hv_timing(&pipe_config->requested_mode,
+			       &pipe_config->pipe_src_w,
+			       &pipe_config->pipe_src_h);
 
 encoder_retry:
 	/* Ensure the port clock defaults are reset when retrying. */
include/drm/drm_crtc.h +2 -0
index 7b28ab0..23236f6 100644
@@ -1138,6 +1138,8 @@ extern int drm_plane_init(struct drm_device *dev,
 extern void drm_plane_cleanup(struct drm_plane *plane);
 extern unsigned int drm_plane_index(struct drm_plane *plane);
 extern void drm_plane_force_disable(struct drm_plane *plane);
+extern void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
+				   int *hdisplay, int *vdisplay);
 extern int drm_crtc_check_viewport(const struct drm_crtc *crtc,
 				   int x, int y,
 				   const struct drm_display_mode *mode,
include/drm/drm_modes.h +3 -0
index 91d0582..8f17811 100644
@@ -90,6 +90,9 @@ enum drm_mode_status {
 
 #define CRTC_INTERLACE_HALVE_V	(1 << 0) /* halve V values for interlacing */
 #define CRTC_STEREO_DOUBLE	(1 << 1) /* adjust timings for stereo modes */
+#define CRTC_NO_DBLSCAN		(1 << 2) /* don't adjust doublescan */
+#define CRTC_NO_VSCAN		(1 << 3) /* don't adjust doublescan */
+#define CRTC_STEREO_DOUBLE_ONLY	(CRTC_NO_DBLSCAN | CRTC_NO_VSCAN)
 
 #define DRM_MODE_FLAG_3D_MAX	DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF
 
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#2 lore raw

PATCH 2/5 drm/i915: remove intel_crtc_cursor_set_obj() (v5)

In reply to Matt Roper

From: Gustavo Padovan <[email protected]>

Merge it into the plane update_plane() callback and make other users use the update_plane() functions instead.

The fb != crtc->cursor->fb was already inside intel_crtc_cursor_set_obj() so we fold intel_crtc_cursor_set_obj() inside intel_commit_cursor_plane() and merge both paths into one.

v5 (by Matt):
- Rebase onto latest di-nightly codebase
- Drop extra unreference call when we fail to pin (Ville)

Reviewed-by(v4): Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/intel_display.c | 215 ++++++++++++++++-------------------
 1 file changed, 99 insertions(+), 116 deletions(-)
drivers/gpu/drm/i915/intel_display.c +99 -116
index a967623..8dbc0e9 100644
@@ -8364,109 +8364,6 @@ static bool cursor_size_ok(struct drm_device *dev,
 	return true;
 }
 
-static int intel_crtc_cursor_set_obj(struct drm_crtc *crtc,
-				     struct drm_i915_gem_object *obj,
-				     uint32_t width, uint32_t height)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	enum pipe pipe = intel_crtc->pipe;
-	unsigned old_width;
-	uint32_t addr;
-	int ret;
-
-	/* if we want to turn off the cursor ignore width and height */
-	if (!obj) {
-		DRM_DEBUG_KMS("cursor off\n");
-		addr = 0;
-		mutex_lock(&dev->struct_mutex);
-		goto finish;
-	}
-
-	/* we only need to pin inside GTT if cursor is non-phy */
-	mutex_lock(&dev->struct_mutex);
-	if (!INTEL_INFO(dev)->cursor_needs_physical) {
-		unsigned alignment;
-
-		/*
-		 * Global gtt pte registers are special registers which actually
-		 * forward writes to a chunk of system memory. Which means that
-		 * there is no risk that the register values disappear as soon
-		 * as we call intel_runtime_pm_put(), so it is correct to wrap
-		 * only the pin/unpin/fence and not more.
-		 */
-		intel_runtime_pm_get(dev_priv);
-
-		/* Note that the w/a also requires 2 PTE of padding following
-		 * the bo. We currently fill all unused PTE with the shadow
-		 * page and so we should always have valid PTE following the
-		 * cursor preventing the VT-d warning.
-		 */
-		alignment = 0;
-		if (need_vtd_wa(dev))
-			alignment = 64*1024;
-
-		ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL);
-		if (ret) {
-			DRM_DEBUG_KMS("failed to move cursor bo into the GTT\n");
-			intel_runtime_pm_put(dev_priv);
-			goto fail_locked;
-		}
-
-		ret = i915_gem_object_put_fence(obj);
-		if (ret) {
-			DRM_DEBUG_KMS("failed to release fence for cursor");
-			intel_runtime_pm_put(dev_priv);
-			goto fail_unpin;
-		}
-
-		addr = i915_gem_obj_ggtt_offset(obj);
-
-		intel_runtime_pm_put(dev_priv);
-	} else {
-		int align = IS_I830(dev) ? 16 * 1024 : 256;
-		ret = i915_gem_object_attach_phys(obj, align);
-		if (ret) {
-			DRM_DEBUG_KMS("failed to attach phys object\n");
-			goto fail_locked;
-		}
-		addr = obj->phys_handle->busaddr;
-	}
-
- finish:
-	if (intel_crtc->cursor_bo) {
-		if (!INTEL_INFO(dev)->cursor_needs_physical)
-			i915_gem_object_unpin_from_display_plane(intel_crtc->cursor_bo);
-	}
-
-	i915_gem_track_fb(intel_crtc->cursor_bo, obj,
-			  INTEL_FRONTBUFFER_CURSOR(pipe));
-	mutex_unlock(&dev->struct_mutex);
-
-	old_width = intel_crtc->cursor_width;
-
-	intel_crtc->cursor_addr = addr;
-	intel_crtc->cursor_bo = obj;
-	intel_crtc->cursor_width = width;
-	intel_crtc->cursor_height = height;
-
-	if (intel_crtc->active) {
-		if (old_width != width)
-			intel_update_watermarks(crtc);
-		intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
-
-		intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_CURSOR(pipe));
-	}
-
-	return 0;
-fail_unpin:
-	i915_gem_object_unpin_from_display_plane(obj);
-fail_locked:
-	mutex_unlock(&dev->struct_mutex);
-	return ret;
-}
-
 static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
 				 u16 *blue, uint32_t start, uint32_t size)
 {
@@ -11965,7 +11862,8 @@ intel_cursor_plane_disable(struct drm_plane *plane)
 
 	BUG_ON(!plane->crtc);
 
-	return intel_crtc_cursor_set_obj(plane->crtc, NULL, 0, 0);
+	return plane->funcs->update_plane(plane, plane->crtc, NULL,
+					  0, 0, 0, 0, 0, 0, 0, 0);
 }
 
 static int
@@ -12029,12 +11927,15 @@ intel_commit_cursor_plane(struct drm_plane *plane,
 			  struct intel_plane_state *state)
 {
 	struct drm_crtc *crtc = state->crtc;
-	struct drm_framebuffer *fb = state->fb;
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_plane *intel_plane = to_intel_plane(plane);
-	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
-	struct drm_i915_gem_object *obj = intel_fb->obj;
-	int crtc_w, crtc_h;
+	struct drm_i915_gem_object *obj = intel_fb_obj(state->fb);
+	enum pipe pipe = intel_crtc->pipe;
+	unsigned old_width;
+	uint32_t addr;
+	int ret;
 
 	crtc->cursor_x = state->orig_dst.x1;
 	crtc->cursor_y = state->orig_dst.y1;
@@ -12049,18 +11950,100 @@ intel_commit_cursor_plane(struct drm_plane *plane,
 	intel_plane->src_h = drm_rect_height(&state->orig_src);
 	intel_plane->obj = obj;
 
-	if (fb != crtc->cursor->fb) {
-		crtc_w = drm_rect_width(&state->orig_dst);
-		crtc_h = drm_rect_height(&state->orig_dst);
-		return intel_crtc_cursor_set_obj(crtc, obj, crtc_w, crtc_h);
+	if (intel_crtc->cursor_bo == obj)
+		goto update;
+
+	/* if we want to turn off the cursor ignore width and height */
+	if (!obj) {
+		DRM_DEBUG_KMS("cursor off\n");
+		addr = 0;
+		mutex_lock(&dev->struct_mutex);
+		goto finish;
+	}
+
+	/* we only need to pin inside GTT if cursor is non-phy */
+	mutex_lock(&dev->struct_mutex);
+	if (!INTEL_INFO(dev)->cursor_needs_physical) {
+		unsigned alignment;
+
+		/*
+		 * Global gtt pte registers are special registers which actually
+		 * forward writes to a chunk of system memory. Which means that
+		 * there is no risk that the register values disappear as soon
+		 * as we call intel_runtime_pm_put(), so it is correct to wrap
+		 * only the pin/unpin/fence and not more.
+		 */
+		intel_runtime_pm_get(dev_priv);
+
+		/* Note that the w/a also requires 2 PTE of padding following
+		 * the bo. We currently fill all unused PTE with the shadow
+		 * page and so we should always have valid PTE following the
+		 * cursor preventing the VT-d warning.
+		 */
+		alignment = 0;
+		if (need_vtd_wa(dev))
+			alignment = 64*1024;
+
+		ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL);
+		if (ret) {
+			DRM_DEBUG_KMS("failed to move cursor bo into the GTT\n");
+			intel_runtime_pm_put(dev_priv);
+			goto fail_locked;
+		}
+
+		ret = i915_gem_object_put_fence(obj);
+		if (ret) {
+			DRM_DEBUG_KMS("failed to release fence for cursor");
+			intel_runtime_pm_put(dev_priv);
+			goto fail_unpin;
+		}
+
+		addr = i915_gem_obj_ggtt_offset(obj);
+
+		intel_runtime_pm_put(dev_priv);
+
 	} else {
-		intel_crtc_update_cursor(crtc, state->visible);
+		int align = IS_I830(dev) ? 16 * 1024 : 256;
+		ret = i915_gem_object_attach_phys(obj, align);
+		if (ret) {
+			DRM_DEBUG_KMS("failed to attach phys object\n");
+			goto fail_locked;
+		}
+		addr = obj->phys_handle->busaddr;
+	}
 
-		intel_frontbuffer_flip(crtc->dev,
-				       INTEL_FRONTBUFFER_CURSOR(intel_crtc->pipe));
+finish:
+	if (intel_crtc->cursor_bo) {
+		if (!INTEL_INFO(dev)->cursor_needs_physical)
+			i915_gem_object_unpin_from_display_plane(intel_crtc->cursor_bo);
+	}
 
-		return 0;
+	i915_gem_track_fb(intel_crtc->cursor_bo, obj,
+			  INTEL_FRONTBUFFER_CURSOR(pipe));
+	mutex_unlock(&dev->struct_mutex);
+
+	intel_crtc->cursor_addr = addr;
+	intel_crtc->cursor_bo = obj;
+update:
+	old_width = intel_crtc->cursor_width;
+
+	intel_crtc->cursor_width = drm_rect_width(&state->orig_dst);
+	intel_crtc->cursor_height = drm_rect_height(&state->orig_dst);
+
+	if (intel_crtc->active) {
+		if (old_width != intel_crtc->cursor_width)
+			intel_update_watermarks(crtc);
+		intel_crtc_update_cursor(crtc, state->visible);
+
+		intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_CURSOR(pipe));
 	}
+
+	return 0;
+fail_unpin:
+	i915_gem_object_unpin_from_display_plane(obj);
+fail_locked:
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
 }
 
 static int
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#3 lore raw

PATCH 3/5 drm/i915: Don't store panning coordinates as 16.16 fixed point

In reply to Matt Roper

When using the universal plane interface, the source rectangle coordinates define the panning offset for the primary plane, which needs to be stored in crtc->{x,y}. The original universal plane code negelected to set these panning offset fields, which was partially remedied in:

commit ccc759dc2a0214fd8b65ed4ebe78050874a67f94
Author: Gustavo Padovan <[email protected]>
Date: Wed Sep 24 14:20:22 2014 -0300

drm/i915: Merge of visible and !visible paths for primary planes

However the plane source coordinates are provided in 16.16 fixed point format and the above commit forgot to convert back to integer coordinates before saving the values. When we replace intel_pipe_set_base() with plane->funcs->update_plane() in a future patch, this bug becomes visible via the set_config entrypoint as well as update_plane.

Cc: Gustavo Padovan <[email protected]>
Testcase: igt/kms_plane

---
 drivers/gpu/drm/i915/intel_display.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_display.c +2 -2
index 8dbc0e9..1c1886e 100644
@@ -11668,8 +11668,8 @@ intel_commit_primary_plane(struct drm_plane *plane,
 	struct drm_rect *src = &state->src;
 
 	crtc->primary->fb = fb;
-	crtc->x = src->x1;
-	crtc->y = src->y1;
+	crtc->x = src->x1 >> 16;
+	crtc->y = src->y1 >> 16;
 
 	intel_plane->crtc_x = state->orig_dst.x1;
 	intel_plane->crtc_y = state->orig_dst.y1;
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#4 lore raw

PATCH 4/5 drm/i915: remove intel_pipe_set_base() (v4)

In reply to Matt Roper

From: Gustavo Padovan <[email protected]>

After some refactor intel_primary_plane_setplane() does the same as intel_pipe_set_base() so we can get rid of it and replace the calls with intel_primary_plane_setplane().

v2: take Ville's comments:
- get the right arguments for update_plane()
- use drm_crtc_get_hv_timing()

v3 (by Matt):
- Rebase to latest di-nightly codebase
- Use primary->funcs->update_plane() in __intel_set_mode()
- Use primary->funcs->disable_plane() in intel_crtc_disable()

v4 (by Matt):
- Drop redundant calls to intel_crtc_wait_for_pending_flips() before calling update_plane() (Ville)

---
 drivers/gpu/drm/i915/intel_display.c | 129 ++++++++---------------------------
 1 file changed, 28 insertions(+), 101 deletions(-)
drivers/gpu/drm/i915/intel_display.c +28 -101
index 1c1886e..3482946 100644
@@ -2890,71 +2890,6 @@ static void intel_update_pipe_size(struct intel_crtc *crtc)
 	crtc->config.pipe_src_h = adjusted_mode->crtc_vdisplay;
 }
 
-static int
-intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
-		    struct drm_framebuffer *fb)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	enum pipe pipe = intel_crtc->pipe;
-	struct drm_framebuffer *old_fb = crtc->primary->fb;
-	struct drm_i915_gem_object *old_obj = intel_fb_obj(old_fb);
-	int ret;
-
-	if (intel_crtc_has_pending_flip(crtc)) {
-		DRM_ERROR("pipe is still busy with an old pageflip\n");
-		return -EBUSY;
-	}
-
-	/* no fb bound */
-	if (!fb) {
-		DRM_ERROR("No FB bound\n");
-		return 0;
-	}
-
-	if (intel_crtc->plane > INTEL_INFO(dev)->num_pipes) {
-		DRM_ERROR("no plane for crtc: plane %c, num_pipes %d\n",
-			  plane_name(intel_crtc->plane),
-			  INTEL_INFO(dev)->num_pipes);
-		return -EINVAL;
-	}
-
-	mutex_lock(&dev->struct_mutex);
-	ret = intel_pin_and_fence_fb_obj(crtc->primary, fb, NULL);
-	if (ret == 0)
-		i915_gem_track_fb(old_obj, intel_fb_obj(fb),
-				  INTEL_FRONTBUFFER_PRIMARY(pipe));
-	mutex_unlock(&dev->struct_mutex);
-	if (ret != 0) {
-		DRM_ERROR("pin & fence failed\n");
-		return ret;
-	}
-
-	dev_priv->display.update_primary_plane(crtc, fb, x, y);
-
-	if (intel_crtc->active)
-		intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_PRIMARY(pipe));
-
-	crtc->primary->fb = fb;
-	crtc->x = x;
-	crtc->y = y;
-
-	if (old_fb) {
-		if (intel_crtc->active && old_fb != fb)
-			intel_wait_for_vblank(dev, intel_crtc->pipe);
-		mutex_lock(&dev->struct_mutex);
-		intel_unpin_fb_obj(old_obj);
-		mutex_unlock(&dev->struct_mutex);
-	}
-
-	mutex_lock(&dev->struct_mutex);
-	intel_update_fbc(dev);
-	mutex_unlock(&dev->struct_mutex);
-
-	return 0;
-}
-
 static void intel_fdi_normal_train(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
@@ -5267,8 +5202,6 @@ static void intel_crtc_disable(struct drm_crtc *crtc)
 	struct drm_device *dev = crtc->dev;
 	struct drm_connector *connector;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct drm_i915_gem_object *old_obj = intel_fb_obj(crtc->primary->fb);
-	enum pipe pipe = to_intel_crtc(crtc)->pipe;
 
 	/* crtc should still be enabled when we disable it. */
 	WARN_ON(!crtc->enabled);
@@ -5277,14 +5210,7 @@ static void intel_crtc_disable(struct drm_crtc *crtc)
 	intel_crtc_update_sarea(crtc, false);
 	dev_priv->display.off(crtc);
 
-	if (crtc->primary->fb) {
-		mutex_lock(&dev->struct_mutex);
-		intel_unpin_fb_obj(old_obj);
-		i915_gem_track_fb(old_obj, NULL,
-				  INTEL_FRONTBUFFER_PRIMARY(pipe));
-		mutex_unlock(&dev->struct_mutex);
-		crtc->primary->fb = NULL;
-	}
+	crtc->primary->funcs->disable_plane(crtc->primary);
 
 	/* Update computed state. */
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
@@ -9578,6 +9504,8 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 	struct drm_framebuffer *old_fb = crtc->primary->fb;
 	struct drm_i915_gem_object *obj = intel_fb_obj(fb);
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_plane *primary = crtc->primary;
+	struct intel_plane *intel_plane = to_intel_plane(primary);
 	enum pipe pipe = intel_crtc->pipe;
 	struct intel_unpin_work *work;
 	struct intel_engine_cs *ring;
@@ -9736,8 +9664,15 @@ free_work:
 
 	if (ret == -EIO) {
 out_hang:
-		intel_crtc_wait_for_pending_flips(crtc);
-		ret = intel_pipe_set_base(crtc, crtc->x, crtc->y, fb);
+		ret = primary->funcs->update_plane(primary, crtc, fb,
+						   intel_plane->crtc_x,
+						   intel_plane->crtc_y,
+						   intel_plane->crtc_h,
+						   intel_plane->crtc_w,
+						   intel_plane->src_x,
+						   intel_plane->src_y,
+						   intel_plane->src_h,
+						   intel_plane->src_w);
 		if (ret == 0 && event) {
 			spin_lock_irq(&dev->event_lock);
 			drm_send_vblank_event(dev, pipe, event);
@@ -10913,26 +10848,15 @@ static int __intel_set_mode(struct drm_crtc *crtc,
 	 * on the DPLL.
 	 */
 	for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
-		struct drm_framebuffer *old_fb = crtc->primary->fb;
-		struct drm_i915_gem_object *old_obj = intel_fb_obj(old_fb);
-		struct drm_i915_gem_object *obj = intel_fb_obj(fb);
+		struct drm_plane *primary = intel_crtc->base.primary;
+		int vdisplay, hdisplay;
 
-		mutex_lock(&dev->struct_mutex);
-		ret = intel_pin_and_fence_fb_obj(crtc->primary, fb, NULL);
-		if (ret != 0) {
-			DRM_ERROR("pin & fence failed\n");
-			mutex_unlock(&dev->struct_mutex);
-			goto done;
-		}
-		if (old_fb)
-			intel_unpin_fb_obj(old_obj);
-		i915_gem_track_fb(old_obj, obj,
-				  INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe));
-		mutex_unlock(&dev->struct_mutex);
-
-		crtc->primary->fb = fb;
-		crtc->x = x;
-		crtc->y = y;
+		drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
+		ret = primary->funcs->update_plane(primary, &intel_crtc->base,
+						   fb, 0, 0,
+						   hdisplay, vdisplay,
+						   x << 16, y << 16,
+						   hdisplay << 16, vdisplay << 16);
 	}
 
 	/* Now enable the clocks, plane, pipe, and connectors that we set up. */
@@ -11398,11 +11322,14 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
 					   disable_pipes);
 	} else if (config->fb_changed) {
 		struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc);
-
-		intel_crtc_wait_for_pending_flips(set->crtc);
-
-		ret = intel_pipe_set_base(set->crtc,
-					  set->x, set->y, set->fb);
+		struct drm_plane *primary = set->crtc->primary;
+		int vdisplay, hdisplay;
+
+		drm_crtc_get_hv_timing(set->mode, &hdisplay, &vdisplay);
+		ret = primary->funcs->update_plane(primary, set->crtc, set->fb,
+						   0, 0, hdisplay, vdisplay,
+						   set->x << 16, set->y << 16,
+						   hdisplay << 16, vdisplay << 16);
 
 		/*
 		 * We need to make sure the primary plane is re-enabled if it
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

Re: [PATCH 4/5] drm/i915: remove intel_pipe_set_base() (v4)

Quoted 198 lines · On Tue, 18 Nov 2014 18:18:48 -0800 Matt Roper <[email protected]> wrote:

From: Gustavo Padovan <[email protected]>

After some refactor intel_primary_plane_setplane() does the same as intel_pipe_set_base() so we can get rid of it and replace the calls with intel_primary_plane_setplane().

v2: take Ville's comments:
- get the right arguments for update_plane()
- use drm_crtc_get_hv_timing()

v3 (by Matt):
- Rebase to latest di-nightly codebase
- Use primary->funcs->update_plane() in __intel_set_mode()
- Use primary->funcs->disable_plane() in intel_crtc_disable()

v4 (by Matt):
- Drop redundant calls to intel_crtc_wait_for_pending_flips() before calling update_plane() (Ville)

---
 drivers/gpu/drm/i915/intel_display.c | 129 ++++++++---------------------------
 1 file changed, 28 insertions(+), 101 deletions(-)
drivers/gpu/drm/i915/intel_display.c +21 -101
index 1c1886e..3482946 100644
@@ -2890,71 +2890,6 @@ static void intel_update_pipe_size(struct intel_crtc *crtc)
 	crtc->config.pipe_src_h = adjusted_mode->crtc_vdisplay;
 }
 
-static int
-intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
-		    struct drm_framebuffer *fb)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	enum pipe pipe = intel_crtc->pipe;
-	struct drm_framebuffer *old_fb = crtc->primary->fb;
-	struct drm_i915_gem_object *old_obj = intel_fb_obj(old_fb);
-	int ret;
-
-	if (intel_crtc_has_pending_flip(crtc)) {
-		DRM_ERROR("pipe is still busy with an old pageflip\n");
-		return -EBUSY;
-	}
-
-	/* no fb bound */
-	if (!fb) {
-		DRM_ERROR("No FB bound\n");
-		return 0;
-	}
-
-	if (intel_crtc->plane > INTEL_INFO(dev)->num_pipes) {
-		DRM_ERROR("no plane for crtc: plane %c, num_pipes %d\n",
-			  plane_name(intel_crtc->plane),
-			  INTEL_INFO(dev)->num_pipes);
-		return -EINVAL;
-	}
-
-	mutex_lock(&dev->struct_mutex);
-	ret = intel_pin_and_fence_fb_obj(crtc->primary, fb, NULL);
-	if (ret == 0)
-		i915_gem_track_fb(old_obj, intel_fb_obj(fb),
-				  INTEL_FRONTBUFFER_PRIMARY(pipe));
-	mutex_unlock(&dev->struct_mutex);
-	if (ret != 0) {
-		DRM_ERROR("pin & fence failed\n");
-		return ret;
-	}
-
-	dev_priv->display.update_primary_plane(crtc, fb, x, y);
-
-	if (intel_crtc->active)
-		intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_PRIMARY(pipe));
-
-	crtc->primary->fb = fb;
-	crtc->x = x;
-	crtc->y = y;
-
-	if (old_fb) {
-		if (intel_crtc->active && old_fb != fb)
-			intel_wait_for_vblank(dev, intel_crtc->pipe);
-		mutex_lock(&dev->struct_mutex);
-		intel_unpin_fb_obj(old_obj);
-		mutex_unlock(&dev->struct_mutex);
-	}
-
-	mutex_lock(&dev->struct_mutex);
-	intel_update_fbc(dev);
-	mutex_unlock(&dev->struct_mutex);
-
-	return 0;
-}
-
 static void intel_fdi_normal_train(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
@@ -5267,8 +5202,6 @@ static void intel_crtc_disable(struct drm_crtc *crtc)
 	struct drm_device *dev = crtc->dev;
 	struct drm_connector *connector;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct drm_i915_gem_object *old_obj = intel_fb_obj(crtc->primary->fb);
-	enum pipe pipe = to_intel_crtc(crtc)->pipe;
 
 	/* crtc should still be enabled when we disable it. */
 	WARN_ON(!crtc->enabled);
@@ -5277,14 +5210,7 @@ static void intel_crtc_disable(struct drm_crtc *crtc)
 	intel_crtc_update_sarea(crtc, false);
 	dev_priv->display.off(crtc);
 
-	if (crtc->primary->fb) {
-		mutex_lock(&dev->struct_mutex);
-		intel_unpin_fb_obj(old_obj);
-		i915_gem_track_fb(old_obj, NULL,
-				  INTEL_FRONTBUFFER_PRIMARY(pipe));
-		mutex_unlock(&dev->struct_mutex);
-		crtc->primary->fb = NULL;
-	}
+	crtc->primary->funcs->disable_plane(crtc->primary);
 
 	/* Update computed state. */
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
@@ -9578,6 +9504,8 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 	struct drm_framebuffer *old_fb = crtc->primary->fb;
 	struct drm_i915_gem_object *obj = intel_fb_obj(fb);
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_plane *primary = crtc->primary;
+	struct intel_plane *intel_plane = to_intel_plane(primary);
 	enum pipe pipe = intel_crtc->pipe;
 	struct intel_unpin_work *work;
 	struct intel_engine_cs *ring;
@@ -9736,8 +9664,15 @@ free_work:
 
 	if (ret == -EIO) {
 out_hang:
-		intel_crtc_wait_for_pending_flips(crtc);
-		ret = intel_pipe_set_base(crtc, crtc->x, crtc->y, fb);
+		ret = primary->funcs->update_plane(primary, crtc, fb,
+						   intel_plane->crtc_x,
+						   intel_plane->crtc_y,
+						   intel_plane->crtc_h,
+						   intel_plane->crtc_w,
+						   intel_plane->src_x,
+						   intel_plane->src_y,
+						   intel_plane->src_h,
+						   intel_plane->src_w);
 		if (ret == 0 && event) {
 			spin_lock_irq(&dev->event_lock);
 			drm_send_vblank_event(dev, pipe, event);
@@ -10913,26 +10848,15 @@ static int __intel_set_mode(struct drm_crtc *crtc,
 	 * on the DPLL.
 	 */
 	for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
-		struct drm_framebuffer *old_fb = crtc->primary->fb;
-		struct drm_i915_gem_object *old_obj = intel_fb_obj(old_fb);
-		struct drm_i915_gem_object *obj = intel_fb_obj(fb);
+		struct drm_plane *primary = intel_crtc->base.primary;
+		int vdisplay, hdisplay;
 
-		mutex_lock(&dev->struct_mutex);
-		ret = intel_pin_and_fence_fb_obj(crtc->primary, fb, NULL);
-		if (ret != 0) {
-			DRM_ERROR("pin & fence failed\n");
-			mutex_unlock(&dev->struct_mutex);
-			goto done;
-		}
-		if (old_fb)
-			intel_unpin_fb_obj(old_obj);
-		i915_gem_track_fb(old_obj, obj,
-				  INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe));
-		mutex_unlock(&dev->struct_mutex);
-
-		crtc->primary->fb = fb;
-		crtc->x = x;
-		crtc->y = y;
+		drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
+		ret = primary->funcs->update_plane(primary, &intel_crtc->base,
+						   fb, 0, 0,
+						   hdisplay, vdisplay,
+						   x << 16, y << 16,
+						   hdisplay << 16, vdisplay << 16);
 	}
 
 	/* Now enable the clocks, plane, pipe, and connectors that we set up. */
@@ -11398,11 +11322,14 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
 					   disable_pipes);
 	} else if (config->fb_changed) {
 		struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc);
-
-		intel_crtc_wait_for_pending_flips(set->crtc);
-
-		ret = intel_pipe_set_base(set->crtc,
-					  set->x, set->y, set->fb);
+		struct drm_plane *primary = set->crtc->primary;

drivers/gpu/drm/i915/intel_display.c static int intel_crtc_set_config(struct drm_mode_set *set) · line 11335

Quoted 10 lines
drivers/gpu/drm/i915/intel_display.c +7 -0
+		int vdisplay, hdisplay;
+
+		drm_crtc_get_hv_timing(set->mode, &hdisplay, &vdisplay);
+		ret = primary->funcs->update_plane(primary, set->crtc, set->fb,
+						   0, 0, hdisplay, vdisplay,
+						   set->x << 16, set->y << 16,
+						   hdisplay << 16, vdisplay << 16);
 
 		/*
 		 * We need to make sure the primary plane is re-enabled if it
Signature · 5 lines
Jesse Barnes, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#6 lore raw

PATCH 5/5 drm/i915: Introduce intel_prepare_cursor_plane()

In reply to Matt Roper

Primary and sprite planes have already been refactored to include a 'prepare' step which handles all the commit-time operations that could fail (i.e., pinning buffers and such). Refactor the cursor commit in a similar manner.

For simplicity and consistency with other plane types, we also switch to using intel_pin_and_fence_fb_obj() to perform our pinning for non-physical cursors. This will allow us to more easily migrate the code into the atomic 'begin' handler in a plane-agnostic manner in a future patchset.

---
 drivers/gpu/drm/i915/intel_display.c | 114 ++++++++++++++---------------------
 1 file changed, 44 insertions(+), 70 deletions(-)
drivers/gpu/drm/i915/intel_display.c +44 -70
index 3482946..a0247e7 100644
@@ -11850,19 +11850,51 @@ intel_check_cursor_plane(struct drm_plane *plane,
 }
 
 static int
+intel_prepare_cursor_plane(struct drm_plane *plane,
+			   struct intel_plane_state *state)
+{
+	struct drm_device *dev = plane->dev;
+	struct drm_framebuffer *fb = state->fb;
+	struct intel_crtc *intel_crtc = to_intel_crtc(state->crtc);
+	struct drm_i915_gem_object *obj = intel_fb_obj(fb);
+	struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb);
+	enum pipe pipe = intel_crtc->pipe;
+	int ret = 0;
+
+	if (old_obj != obj) {
+		/* we only need to pin inside GTT if cursor is non-phy */
+		mutex_lock(&dev->struct_mutex);
+		if (!INTEL_INFO(dev)->cursor_needs_physical) {
+			if (obj)
+				ret = intel_pin_and_fence_fb_obj(plane, fb, NULL);
+			if (ret == 0)
+				i915_gem_track_fb(intel_crtc->cursor_bo, obj,
+						  INTEL_FRONTBUFFER_CURSOR(pipe));
+		} else {
+			int align = IS_I830(dev) ? 16 * 1024 : 256;
+			if (obj)
+				ret = i915_gem_object_attach_phys(obj, align);
+			if (ret)
+				DRM_DEBUG_KMS("failed to attach phys object\n");
+		}
+		mutex_unlock(&dev->struct_mutex);
+	}
+
+	return ret;
+}
+
+static void
 intel_commit_cursor_plane(struct drm_plane *plane,
 			  struct intel_plane_state *state)
 {
 	struct drm_crtc *crtc = state->crtc;
 	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_plane *intel_plane = to_intel_plane(plane);
 	struct drm_i915_gem_object *obj = intel_fb_obj(state->fb);
 	enum pipe pipe = intel_crtc->pipe;
 	unsigned old_width;
 	uint32_t addr;
-	int ret;
 
 	crtc->cursor_x = state->orig_dst.x1;
 	crtc->cursor_y = state->orig_dst.y1;
@@ -11880,75 +11912,18 @@ intel_commit_cursor_plane(struct drm_plane *plane,
 	if (intel_crtc->cursor_bo == obj)
 		goto update;
 
-	/* if we want to turn off the cursor ignore width and height */
-	if (!obj) {
-		DRM_DEBUG_KMS("cursor off\n");
+	if (!obj)
 		addr = 0;
-		mutex_lock(&dev->struct_mutex);
-		goto finish;
-	}
-
-	/* we only need to pin inside GTT if cursor is non-phy */
-	mutex_lock(&dev->struct_mutex);
-	if (!INTEL_INFO(dev)->cursor_needs_physical) {
-		unsigned alignment;
-
-		/*
-		 * Global gtt pte registers are special registers which actually
-		 * forward writes to a chunk of system memory. Which means that
-		 * there is no risk that the register values disappear as soon
-		 * as we call intel_runtime_pm_put(), so it is correct to wrap
-		 * only the pin/unpin/fence and not more.
-		 */
-		intel_runtime_pm_get(dev_priv);
-
-		/* Note that the w/a also requires 2 PTE of padding following
-		 * the bo. We currently fill all unused PTE with the shadow
-		 * page and so we should always have valid PTE following the
-		 * cursor preventing the VT-d warning.
-		 */
-		alignment = 0;
-		if (need_vtd_wa(dev))
-			alignment = 64*1024;
-
-		ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL);
-		if (ret) {
-			DRM_DEBUG_KMS("failed to move cursor bo into the GTT\n");
-			intel_runtime_pm_put(dev_priv);
-			goto fail_locked;
-		}
-
-		ret = i915_gem_object_put_fence(obj);
-		if (ret) {
-			DRM_DEBUG_KMS("failed to release fence for cursor");
-			intel_runtime_pm_put(dev_priv);
-			goto fail_unpin;
-		}
-
+	else if (!INTEL_INFO(dev)->cursor_needs_physical)
 		addr = i915_gem_obj_ggtt_offset(obj);
-
-		intel_runtime_pm_put(dev_priv);
-
-	} else {
-		int align = IS_I830(dev) ? 16 * 1024 : 256;
-		ret = i915_gem_object_attach_phys(obj, align);
-		if (ret) {
-			DRM_DEBUG_KMS("failed to attach phys object\n");
-			goto fail_locked;
-		}
+	else
 		addr = obj->phys_handle->busaddr;
-	}
 
-finish:
 	if (intel_crtc->cursor_bo) {
 		if (!INTEL_INFO(dev)->cursor_needs_physical)
 			i915_gem_object_unpin_from_display_plane(intel_crtc->cursor_bo);
 	}
 
-	i915_gem_track_fb(intel_crtc->cursor_bo, obj,
-			  INTEL_FRONTBUFFER_CURSOR(pipe));
-	mutex_unlock(&dev->struct_mutex);
-
 	intel_crtc->cursor_addr = addr;
 	intel_crtc->cursor_bo = obj;
 update:
@@ -11964,13 +11939,6 @@ update:
 
 		intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_CURSOR(pipe));
 	}
-
-	return 0;
-fail_unpin:
-	i915_gem_object_unpin_from_display_plane(obj);
-fail_locked:
-	mutex_unlock(&dev->struct_mutex);
-	return ret;
 }
 
 static int
@@ -12011,7 +11979,13 @@ intel_cursor_plane_update(struct drm_plane *plane, struct drm_crtc *crtc,
 	if (ret)
 		return ret;
 
-	return intel_commit_cursor_plane(plane, &state);
+	ret = intel_prepare_cursor_plane(plane, &state);
+	if (ret)
+		return ret;
+
+	intel_commit_cursor_plane(plane, &state);
+
+	return 0;
 }
 
 static const struct drm_plane_funcs intel_cursor_plane_funcs = {
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tested-by on v1 5/5
#7 lore raw

Re: [PATCH 5/5] drm/i915: Introduce

-------------------------------------Summary-------------------------------------
Platform Delta drm-intel-nightly Series Applied
PNV 369/369 369/369

ILK                 -1              403/403              402/403
SNB                 -1              459/459              458/459
IVB                 -1              535/545              534/545

BYT 290/290 290/290
HSW -1 610/610 609/610
BDW 451/451 451/451
-------------------------------------Detailed-------------------------------------
test_platform: test_suite, test_case, result_with_drm_intel_nightly(count, machine_id...)...->result_with_patch_applied(count, machine_id)...
ILK: Intel_gpu_tools, igt_kms_3d, DMESG_WARN(3, M37)PASS(1, M6) -> DMESG_WARN(1, M37)PASS(3, M37)
SNB: Intel_gpu_tools, igt_kms_3d, DMESG_WARN(6, M22M35)PASS(1, M35) -> DMESG_WARN(1, M35)PASS(3, M35)
IVB: Intel_gpu_tools, igt_kms_3d, DMESG_WARN(6, M4M34)PASS(1, M21) -> DMESG_WARN(1, M34)PASS(3, M34)
HSW: Intel_gpu_tools, igt_gem_reset_stats_close-pending-fork-render, PASS(4, M19M40) -> NO_RESULT(1, M40)PASS(3, M40)
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx