block: Incremental backup series
v8 cover block: Incremental backup series
This is the in memory part of the incremental backup feature.
With the added commands, we can create a bitmap on a block backend, from which point of time all the writes are tracked by the bitmap, marking sectors as dirty. Later, we call drive-backup and pass the bitmap to it, to do an incremental backup.
See the last patch which adds some tests for this use case.
Fam
==
This is the next iteration of Fam's incremenetal backup feature. I have since taken this over from him and have (slowly) worked through the feedback to the last version of his patch and have made many tiny little edits.
For convenience: https://github.com/jnsnow/qemu/commits/dbm-backup
John.
v8:
- Changed int64_t return for bdrv_dbm_calc_def_granularity to uint64_t (2/10)
- Updated commit message (2/10)
- Removed redundant check for null in device parameter (2/10)
- Removed comment cruft. (2/10)
- Removed redundant local_err propagation (several)
- Updated commit message (3/10)
- Fix HBitmap copy loop index (4/10)
- Remove redundant ternary (5/10)
- Shift up the block_dirty_bitmap_lookup function (6/10)
- Error messages cleanup (7/10)
- Add an assertion to explain the re-use of .prepare() for two transactions. (8/10)
- Removed BDS argument from bitmap enable/disable helper; it was unused. (8/10)
v7: (highlights)
- First version being authored by jsnow
- Addressed most list feedback from V6, many small changes. All feedback was either addressed on-list (as a wontfix) or patched.
- Replaced all error_set with error_setg
- Replaced all bdrv_find with bdrv_lookup_bs()
- Adjusted the max granularity to share a common function with backup/mirror that attempts to "guess" a reasonable default. It clamps between [4K,64K] currently.
- The BdrvDirtyBitmap object now counts granularity exclusively in bytes to match its interface.
It leaves the sector granularity concerns to HBitmap.
- Reworked the backup loop to utilize the hbitmap iterator. There are some extra concerns to handle arrhythmic cases where the granularity of the bitmap does not match the backup cluster size. This iteration works best when it does match, but it's not a deal-breaker if it doesn't -- it just gets less efficient.
- Reworked the transactional functions so that abort() wouldn't "undo" a redundant command. They now have been split into a prepare and a commit function (with state) and do not provide an abort command.
- Added a block_dirty_bitmap_lookup(device, name, errp) function to shorten a few of the commands added in this series, particularly qmp_enable, qmp_disable, and the transaction preparations.
v6: Re-send of v5.
v5: Rebase to master.
v4: Last version tailored by Fam Zheng.
Fam Zheng (10):
qapi: Add optional field "name" to block dirty bitmap
qmp: Add block-dirty-bitmap-add and block-dirty-bitmap-remove
block: Introduce bdrv_dirty_bitmap_granularity()
hbitmap: Add hbitmap_copy
block: Add bdrv_copy_dirty_bitmap and bdrv_reset_dirty_bitmap
qmp: Add block-dirty-bitmap-enable and block-dirty-bitmap-disable
qmp: Add support of "dirty-bitmap" sync mode for drive-backup
qapi: Add transaction support to block-dirty-bitmap-{add, enable,
disable}
qmp: Add dirty bitmap 'enabled' field in query-block
qemu-iotests: Add tests for drive-backup sync=dirty-bitmap
block-migration.c | 2 +- block.c | 114 ++++++++++++++++++++-- block/backup.c | 130 +++++++++++++++++++++---- block/mirror.c | 16 ++-- blockdev.c | 218 +++++++++++++++++++++++++++++++++++++++++- hmp.c | 4 +- include/block/block.h | 17 +++- include/block/block_int.h | 6 ++ include/qemu/hbitmap.h | 8 ++ qapi-schema.json | 5 +- qapi/block-core.json | 120 ++++++++++++++++++++++- qmp-commands.hx | 66 ++++++++++++- tests/qemu-iotests/056 | 33 ++++++- tests/qemu-iotests/056.out | 4 +- tests/qemu-iotests/iotests.py | 8 ++ util/hbitmap.c | 16 ++++ 16 files changed, 712 insertions(+), 55 deletions(-)
Signature · 1 line
1.9.3
PATCH v8 1/10 qapi: Add optional field "name" to block dirty bitmap
From: Fam Zheng <[email protected]>
This field will be set for user created dirty bitmap. Also pass in an error pointer to bdrv_create_dirty_bitmap, so when a name is already taken on this BDS, it can report an error message. This is not global check, two BDSes can have dirty bitmap with a common name.
Implemented bdrv_find_dirty_bitmap to find a dirty bitmap by name, will be used later when other QMP commands want to reference dirty bitmap by name.
Add bdrv_dirty_bitmap_make_anon. This unsets the name of dirty bitmap.
--- block-migration.c | 2 +- block.c | 32 +++++++++++++++++++++++++++++++- block/mirror.c | 2 +- include/block/block.h | 7 ++++++- qapi/block-core.json | 4 +++- 5 files changed, 42 insertions(+), 5 deletions(-)
block-migration.c +1 -1
@@ -319,7 +319,7 @@ static int set_dirty_tracking(void) QSIMPLEQ_FOREACH(bmds, &block_mig_state.bmds_list, entry) { bmds->dirty_bitmap =bdrv_create_dirty_bitmap (bmds->bs,BLOCK_SIZE , -NULL ); +NULL ,NULL );if (!bmds->dirty_bitmap) { ret = -errno; goto fail;
block.c +31 -1
@@ -53,6 +53,7 @@struct BdrvDirtyBitmap {HBitmap *bitmap; +char *name;QLIST_ENTRY (BdrvDirtyBitmap) list; };
@@ -5291,7 +5292,28 @@ bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)return true; } -BdrvDirtyBitmap *bdrv_create_dirty_bitmap (BlockDriverState *bs,int granularity, +BdrvDirtyBitmap *bdrv_find_dirty_bitmap (BlockDriverState *bs,const char *name) +{ +BdrvDirtyBitmap *bm; + +assert (name); + QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) { +if (bm->name && !strcmp (name, bm->name)) { +return bm; + } + } +return NULL ; +} + +void bdrv_dirty_bitmap_make_anon (BlockDriverState *bs,BdrvDirtyBitmap *bitmap) +{ +g_free (bitmap->name); + bitmap->name =NULL ; +} + +BdrvDirtyBitmap *bdrv_create_dirty_bitmap (BlockDriverState *bs, +int granularity, +const char *name,Error **errp) {int64_t bitmap_size;
@@ -5299,6 +5321,10 @@ BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity,assert ((granularity & (granularity -1 )) ==0 ); +if (name &&bdrv_find_dirty_bitmap (bs, name)) { +error_setg (errp,"Bitmap already exists: %s" , name); +return NULL ; + } granularity >>=BDRV_SECTOR_BITS ;assert (granularity); bitmap_size =bdrv_nb_sectors (bs);
@@ -5309,6 +5335,7 @@ BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity, } bitmap =g_new0 (BdrvDirtyBitmap,1 ); bitmap->bitmap =hbitmap_alloc (bitmap_size,ffs (granularity) -1 ); + bitmap->name =g_strdup (name);QLIST_INSERT_HEAD (&bs->dirty_bitmaps, bitmap, list);return bitmap; }
@@ -5320,6 +5347,7 @@ void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)if (bm == bitmap) {QLIST_REMOVE (bitmap, list);hbitmap_free (bitmap->bitmap); +g_free (bitmap->name);g_free (bitmap);return ; }
@@ -5338,6 +5366,8 @@ BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs) info->count =bdrv_get_dirty_count (bs, bm); info->granularity = ((int64_t )BDRV_SECTOR_SIZE <<hbitmap_granularity (bm->bitmap)); + info->has_name = !!bm->name; + info->name =g_strdup (bm->name); entry->value = info; *plist = entry; plist = &entry->next;
block/mirror.c +1 -1
@@ -699,7 +699,7 @@ static void mirror_start_job(BlockDriverState *bs, BlockDriverState *target, s->granularity = granularity; s->buf_size =MAX (buf_size, granularity); - s->dirty_bitmap =bdrv_create_dirty_bitmap (bs, granularity, errp); + s->dirty_bitmap =bdrv_create_dirty_bitmap (bs, granularity,NULL , errp);if (!s->dirty_bitmap) {return ; }
include/block/block.h +6 -1
@@ -428,8 +428,13 @@ bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov);struct HBitmapIter ;typedef struct BdrvDirtyBitmap BdrvDirtyBitmap ; -BdrvDirtyBitmap *bdrv_create_dirty_bitmap (BlockDriverState *bs,int granularity, +BdrvDirtyBitmap *bdrv_create_dirty_bitmap (BlockDriverState *bs, +int granularity, +const char *name,Error **errp); +BdrvDirtyBitmap *bdrv_find_dirty_bitmap (BlockDriverState *bs, +const char *name); +void bdrv_dirty_bitmap_make_anon (BlockDriverState *bs,BdrvDirtyBitmap *bitmap);void bdrv_release_dirty_bitmap (BlockDriverState *bs,BdrvDirtyBitmap *bitmap);BlockDirtyInfoList *bdrv_query_dirty_bitmaps (BlockDriverState *bs);int bdrv_get_dirty (BlockDriverState *bs,BdrvDirtyBitmap *bitmap,int64_t sector);
qapi/block-core.json +3 -1
@@ -304,6 +304,8 @@ # # Block dirty bitmap information. # +# @name: #optional the name of the dirty bitmap (Since 2.3) +# # @count: number of dirty bytes according to the dirty bitmap # # @granularity: granularity of the dirty bitmap in bytes (since 1.4)
@@ -311,7 +313,7 @@ # Since: 1.3 ## { 'type': 'BlockDirtyInfo', - 'data': {'count': 'int', 'granularity': 'int'} } + 'data': {'*name': 'str', 'count': 'int', 'granularity': 'int'} } ## # @BlockInfo:
Signature · 1 line
1.9.3
Re: [Qemu-devel] [PATCH v8 01/10] qapi: Add optional field "name" to block dirty bitmap
Quoted 15 lines · John Snow
From: Fam Zheng <[email protected]>
This field will be set for user created dirty bitmap. Also pass in an error pointer to
bdrv_create_dirty_bitmap, so when a name is already taken on this BDS, it can report an error message. This is not global check, two BDSes can have dirty bitmap with a common name.Implemented
bdrv_find_dirty_bitmapto find a dirty bitmap by name, will be used later when other QMP commands want to reference dirty bitmap by name.Add
bdrv_dirty_bitmap_make_anon. This unsets the name of dirty bitmap.Signed-off-by Fam Zheng <[email protected]>Signed-off-by John Snow <[email protected]>
Quoted 7 lines
--- block-migration.c | 2 +- block.c | 32 +++++++++++++++++++++++++++++++- block/mirror.c | 2 +- include/block/block.h | 7 ++++++- qapi/block-core.json | 4 +++- 5 files changed, 42 insertions(+), 5 deletions(-)
You can keep R-bs on patches which you don't have modified (or only contextually, or directly according to what the reviewer made a condition for the R-b). Just add them below the S-o-b in the commit message.
PATCH v8 2/10 qmp: Add block-dirty-bitmap-add and block-dirty-bitmap-remove
In reply to John SnowFrom: Fam Zheng <[email protected]>
The new command pair is added to manage user created dirty bitmap. The dirty bitmap's name is mandatory and must be unique for the same device, but different devices can have bitmaps with the same names.
The granularity is an optional field. If it is not specified, we will choose a default granularity based on the cluster size if available, clamped to between 4K and 64K (To mirror how the 'mirror' code was already choosing granularity.) If we do not have cluster size info available, we choose 64K. This code has been factored out into helper shared with block/mirror.
The types added to block-core.json will be re-used in future patches in this series, see:
'qapi: Add transaction support to block-dirty-bitmap-{add, enable, disable}'
--- block.c | 19 ++++++++++++++++++ block/mirror.c | 10 +--------- blockdev.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++ include/block/block.h | 1 + qapi/block-core.json | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++ qmp-commands.hx | 49 +++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 179 insertions(+), 9 deletions(-)
block.c +19 -0
@@ -5385,6 +5385,25 @@ int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector } } +#define BDB_MIN_DEF_GRANULARITY 4096 +#define BDB_MAX_DEF_GRANULARITY 65536 +#define BDB_DEFAULT_GRANULARITY BDB_MAX_DEF_GRANULARITY + +uint64_t bdrv_dbm_calc_def_granularity (BlockDriverState *bs) +{ +BlockDriverInfo bdi; +uint64_t granularity; + +if (bdrv_get_info (bs, &bdi) >=0 && bdi.cluster_size !=0 ) { + granularity =MAX (BDB_MIN_DEF_GRANULARITY , bdi.cluster_size); + granularity =MIN (BDB_MAX_DEF_GRANULARITY , granularity); + }else { + granularity =BDB_DEFAULT_GRANULARITY ; + } + +return granularity; +} +void bdrv_dirty_iter_init (BlockDriverState *bs,BdrvDirtyBitmap *bitmap,HBitmapIter *hbi) {
block/mirror.c +1 -9
@@ -664,15 +664,7 @@ static void mirror_start_job(BlockDriverState *bs, BlockDriverState *target,MirrorBlockJob *s;if (granularity ==0 ) { -/* Choose the default granularity based on the target file's cluster -* size, clamped between 4k and 64k. */ -BlockDriverInfo bdi; -if (bdrv_get_info (target, &bdi) >=0 && bdi.cluster_size !=0 ) { - granularity =MAX (4096 , bdi.cluster_size); - granularity =MIN (65536 , granularity); - }else { - granularity =65536 ; - } + granularity =bdrv_dbm_calc_def_granularity (target); }assert ((granularity & (granularity -1 )) ==0 );
blockdev.c +54 -0
60 lines not on this page · raw message
include/block/block.h +1 -0
@@ -437,6 +437,7 @@ BdrvDirtyBitmap *bdrv_find_dirty_bitmap(BlockDriverState *bs,void bdrv_dirty_bitmap_make_anon (BlockDriverState *bs,BdrvDirtyBitmap *bitmap);void bdrv_release_dirty_bitmap (BlockDriverState *bs,BdrvDirtyBitmap *bitmap);BlockDirtyInfoList *bdrv_query_dirty_bitmaps (BlockDriverState *bs); +uint64_t bdrv_dbm_calc_def_granularity (BlockDriverState *bs);int bdrv_get_dirty (BlockDriverState *bs,BdrvDirtyBitmap *bitmap,int64_t sector);void bdrv_set_dirty (BlockDriverState *bs,int64_t cur_sector,int nr_sectors);void bdrv_reset_dirty (BlockDriverState *bs,int64_t cur_sector,int nr_sectors);
qapi/block-core.json +55 -0
61 lines not on this page · raw message
qmp-commands.hx +49 -0
55 lines not on this page · raw message
Signature · 1 line
1.9.3
Re: [Qemu-devel] [PATCH v8 02/10] qmp: Add block-dirty-bitmap-add and block-dirty-bitmap-remove
Quoted 10 lines · John Snow
From: Fam Zheng <[email protected]>
The new command pair is added to manage user created dirty bitmap. The dirty bitmap's name is mandatory and must be unique for the same device, but different devices can have bitmaps with the same names.
The granularity is an optional field. If it is not specified, we will choose a default granularity based on the cluster size if available, clamped to between 4K and 64K (To mirror how the 'mirror' code was already choosing granularity.) If we do not have cluster size info
Maybe swap the right parenthesis and the full stop?
Quoted 1 line
available, we choose 64K. This code has been factored out into helper
Naturally you're better at English than me, but shouldn't this be "into a helper"?
Quoted 8 lines
shared with block/mirror.
The types added to block-core.json will be re-used in future patches in this series, see:
'qapi: Add transaction support to block-dirty-bitmap-{add, enable, disable}'Signed-off-by Fam Zheng <[email protected]>Signed-off-by John Snow <[email protected]>
Quoted 8 lines
--- block.c | 19 ++++++++++++++++++ block/mirror.c | 10 +--------- blockdev.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++ include/block/block.h | 1 + qapi/block-core.json | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++ qmp-commands.hx | 49 +++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 179 insertions(+), 9 deletions(-)
Anyway, with or without these minor changes:
Re: [Qemu-devel] [PATCH v8 02/10] qmp: Add block-dirty-bitmap-add and block-dirty-bitmap-remove
Quoted 7 lines · Max Reitz
Quoted 6 lines · John Snow
From: Fam Zheng <[email protected]>
The new command pair is added to manage user created dirty bitmap. The dirty bitmap's name is mandatory and must be unique for the same device, but different devices can have bitmaps with the same names.
Quoted 6 lines
Quoted 4 lines
The granularity is an optional field. If it is not specified, we will choose a default granularity based on the cluster size if available, clamped to between 4K and 64K (To mirror how the 'mirror' code was already choosing granularity.) If we do not have cluster size info
Maybe swap the right parenthesis and the full stop?
This is an American thing, the difference between "aesthetic punctuation" and "logical punctuation." (<-- aesthetic.)
http://www.slate.com/articles/life/the_good_word/2011/05/the_rise_of_logical_punctuation.html
I can make a mental note in the future to not use the American style, I just thought it would be fun to explain it.
Quoted 4 lines
Quoted 1 line
available, we choose 64K. This code has been factored out into helper
Naturally you're better at English than me, but shouldn't this be "into a helper"?
This, on the other hand, is just a typo where my brain filled in the missing glue for me.
Quoted 25 lines
Quoted 9 lines
shared with block/mirror.
The types added to block-core.json will be re-used in future patches in this series, see:
'qapi: Add transaction support to block-dirty-bitmap-{add, enable, disable}'Signed-off-by Fam Zheng <[email protected]>Signed-off-by John Snow <[email protected]>Quoted 11 lines
--- block.c | 19 ++++++++++++++++++ block/mirror.c | 10 +--------- blockdev.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++ include/block/block.h | 1 + qapi/block-core.json | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++ qmp-commands.hx | 49 +++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 179 insertions(+), 9 deletions(-)Anyway, with or without these minor changes:
Reviewed-by Max Reitz <[email protected]>
Re: [Qemu-devel] [PATCH v8 02/10] qmp: Add block-dirty-bitmap-add and block-dirty-bitmap-remove
Quoted 15 lines · John Snow
Quoted 12 lines · Max Reitz
Quoted 10 lines · John Snow
From: Fam Zheng <[email protected]>
The new command pair is added to manage user created dirty bitmap. The dirty bitmap's name is mandatory and must be unique for the same device, but different devices can have bitmaps with the same names.
The granularity is an optional field. If it is not specified, we will choose a default granularity based on the cluster size if available, clamped to between 4K and 64K (To mirror how the 'mirror' code was already choosing granularity.) If we do not have cluster size info
Quoted 8 lines
Quoted 1 line
Maybe swap the right parenthesis and the full stop?
This is an American thing, the difference between "aesthetic punctuation" and "logical punctuation." (<-- aesthetic.)
http://www.slate.com/articles/life/the_good_word/2011/05/the_rise_of_logical_punctuation.html
I can make a mental note in the future to not use the American style, I just thought it would be fun to explain it.
No need to not use that style if it's just me learning English by false (or maybe in 50 years it'll be right) accusations. Thanks for your explanation!
Max
Quoted 32 lines
Quoted 4 lines
Quoted 1 line
available, we choose 64K. This code has been factored out into helper
Naturally you're better at English than me, but shouldn't this be "into a helper"?
This, on the other hand, is just a typo where my brain filled in the missing glue for me.
Quoted 25 lines
Quoted 9 lines
shared with block/mirror.
The types added to block-core.json will be re-used in future patches in this series, see:
'qapi: Add transaction support to block-dirty-bitmap-{add, enable, disable}'Signed-off-by Fam Zheng <[email protected]>Signed-off-by John Snow <[email protected]>Quoted 11 lines
--- block.c | 19 ++++++++++++++++++ block/mirror.c | 10 +--------- blockdev.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++ include/block/block.h | 1 + qapi/block-core.json | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++ qmp-commands.hx | 49 +++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 179 insertions(+), 9 deletions(-)Anyway, with or without these minor changes:
Reviewed-by Max Reitz <[email protected]>
PATCH v8 3/10 block: Introduce bdrv_dirty_bitmap_granularity()
In reply to John SnowFrom: Fam Zheng <[email protected]>
This returns the granularity (in bytes) of dirty bitmap, which matches the QMP interface and the existing query interface.
--- block.c | 9 +++++++-- include/block/block.h | 2 ++ 2 files changed, 9 insertions(+), 2 deletions(-)
block.c +7 -2
@@ -5364,8 +5364,7 @@ BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)BlockDirtyInfo *info =g_new0 (BlockDirtyInfo,1 );BlockDirtyInfoList *entry =g_new0 (BlockDirtyInfoList,1 ); info->count =bdrv_get_dirty_count (bs, bm); - info->granularity = - ((int64_t )BDRV_SECTOR_SIZE <<hbitmap_granularity (bm->bitmap)); + info->granularity =bdrv_dirty_bitmap_granularity (bs, bm); info->has_name = !!bm->name; info->name =g_strdup (bm->name); entry->value = info;
@@ -5404,6 +5403,12 @@ uint64_t bdrv_dbm_calc_def_granularity(BlockDriverState *bs)return granularity; } +int64_t bdrv_dirty_bitmap_granularity (BlockDriverState *bs, +BdrvDirtyBitmap *bitmap) +{ +return BDRV_SECTOR_SIZE <<hbitmap_granularity (bitmap->bitmap); +} +void bdrv_dirty_iter_init (BlockDriverState *bs,BdrvDirtyBitmap *bitmap,HBitmapIter *hbi) {
include/block/block.h +2 -0
@@ -438,6 +438,8 @@ void bdrv_dirty_bitmap_make_anon(BlockDriverState *bs, BdrvDirtyBitmap *bitmap);void bdrv_release_dirty_bitmap (BlockDriverState *bs,BdrvDirtyBitmap *bitmap);BlockDirtyInfoList *bdrv_query_dirty_bitmaps (BlockDriverState *bs);uint64_t bdrv_dbm_calc_def_granularity (BlockDriverState *bs); +int64_t bdrv_dirty_bitmap_granularity (BlockDriverState *bs, +BdrvDirtyBitmap *bitmap);int bdrv_get_dirty (BlockDriverState *bs,BdrvDirtyBitmap *bitmap,int64_t sector);void bdrv_set_dirty (BlockDriverState *bs,int64_t cur_sector,int nr_sectors);void bdrv_reset_dirty (BlockDriverState *bs,int64_t cur_sector,int nr_sectors);
Signature · 1 line
1.9.3
Re: [Qemu-devel] [PATCH v8 03/10] block: Introduce bdrv_dirty_bitmap_granularity()
Quoted 6 lines · John Snow
From: Fam Zheng <[email protected]>
This returns the granularity (in bytes) of dirty bitmap, which matches the QMP interface and the existing query interface.
Quoted 6 lines
Signed-off-by Fam Zheng <[email protected]>Signed-off-by John Snow <[email protected]>--- block.c | 9 +++++++-- include/block/block.h | 2 ++ 2 files changed, 9 insertions(+), 2 deletions(-)
PATCH v8 4/10 hbitmap: Add hbitmap_copy
In reply to John SnowFrom: Fam Zheng <[email protected]>
This makes a deep copy of an HBitmap.
--- include/qemu/hbitmap.h | 8 ++++++++ util/hbitmap.c | 16 ++++++++++++++++ 2 files changed, 24 insertions(+)
include/qemu/hbitmap.h +8 -0
@@ -65,6 +65,14 @@ struct HBitmapIter {HBitmap *hbitmap_alloc (uint64_t size,int granularity);/** +* hbitmap_copy: +* @bitmap: The original bitmap to copy. +* +* Copy a HBitmap. +*/ +HBitmap *hbitmap_copy (const HBitmap *bitmap); + +/** * hbitmap_empty: * @hb: HBitmap to operate on. *
util/hbitmap.c +16 -0
@@ -395,3 +395,19 @@ HBitmap *hbitmap_alloc(uint64_t size, int granularity) hb->levels[0 ][0 ] |=1UL << (BITS_PER_LONG -1 );return hb; } + +HBitmap *hbitmap_copy (const HBitmap *bitmap) +{ +int i; +uint64_t size; +HBitmap *hb =g_memdup (bitmap,sizeof (HBitmap)); + + size = bitmap->size; +for (i =HBITMAP_LEVELS -1 ; i >=0 ; i--) { + size =MAX ((size +BITS_PER_LONG -1 ) >>BITS_PER_LEVEL ,1 ); + hb->levels[i] =g_memdup (bitmap->levels[i], + size *sizeof (unsigned long )); + } + +return hb; +}
Signature · 1 line
1.9.3
Re: [Qemu-devel] [PATCH v8 04/10] hbitmap: Add hbitmap_copy
Quoted 10 lines · John Snow
From: Fam Zheng <[email protected]>
This makes a deep copy of an HBitmap.
Signed-off-by Fam Zheng <[email protected]>Signed-off-by John Snow <[email protected]>--- include/qemu/hbitmap.h | 8 ++++++++ util/hbitmap.c | 16 ++++++++++++++++ 2 files changed, 24 insertions(+)
PATCH v8 5/10 block: Add bdrv_copy_dirty_bitmap and bdrv_reset_dirty_bitmap
In reply to John SnowFrom: Fam Zheng <[email protected]>
--- block.c | 35 +++++++++++++++++++++++++++++++---- include/block/block.h | 4 ++++ 2 files changed, 35 insertions(+), 4 deletions(-)
block.c +31 -4
@@ -53,6 +53,8 @@struct BdrvDirtyBitmap {HBitmap *bitmap; +int64_t size; +int64_t granularity;char *name;QLIST_ENTRY (BdrvDirtyBitmap) list; };
@@ -5311,6 +5313,26 @@ void bdrv_dirty_bitmap_make_anon(BlockDriverState *bs, BdrvDirtyBitmap *bitmap) bitmap->name =NULL ; } +BdrvDirtyBitmap *bdrv_copy_dirty_bitmap (BlockDriverState *bs, +const BdrvDirtyBitmap *bitmap, +const char *name) +{ +BdrvDirtyBitmap *new_bitmap; + + new_bitmap =g_malloc0 (sizeof (BdrvDirtyBitmap)); + new_bitmap->bitmap =hbitmap_copy (bitmap->bitmap); + new_bitmap->size = bitmap->size; + new_bitmap->granularity = bitmap->granularity; + new_bitmap->name =g_strdup (name); +QLIST_INSERT_HEAD (&bs->dirty_bitmaps, new_bitmap, list); +return new_bitmap; +} + +void bdrv_reset_dirty_bitmap (BlockDriverState *bs,BdrvDirtyBitmap *bitmap) +{ +hbitmap_reset (bitmap->bitmap,0 , bitmap->size); +} + BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity, const char *name,
@@ -5318,6 +5340,7 @@ BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, {int64_t bitmap_size;BdrvDirtyBitmap *bitmap; +int sector_granularity;assert ((granularity & (granularity -1 )) ==0 );
@@ -5325,8 +5348,8 @@ BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs,error_setg (errp,"Bitmap already exists: %s" , name);return NULL ; } - granularity >>=BDRV_SECTOR_BITS ; -assert (granularity); + sector_granularity = granularity >>BDRV_SECTOR_BITS ; +assert (sector_granularity); bitmap_size =bdrv_nb_sectors (bs);if (bitmap_size <0 ) {error_setg_errno (errp, -bitmap_size,"could not get length of device" );
@@ -5334,7 +5357,9 @@ BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs,return NULL ; } bitmap =g_new0 (BdrvDirtyBitmap,1 ); - bitmap->bitmap =hbitmap_alloc (bitmap_size,ffs (granularity) -1 ); + bitmap->size = bitmap_size; + bitmap->granularity = granularity; + bitmap->bitmap =hbitmap_alloc (bitmap->size,ffs (sector_granularity) -1 ); bitmap->name =g_strdup (name);QLIST_INSERT_HEAD (&bs->dirty_bitmaps, bitmap, list);return bitmap;
@@ -5406,7 +5431,9 @@ uint64_t bdrv_dbm_calc_def_granularity(BlockDriverState *bs)int64_t bdrv_dirty_bitmap_granularity (BlockDriverState *bs,BdrvDirtyBitmap *bitmap) { -return BDRV_SECTOR_SIZE <<hbitmap_granularity (bitmap->bitmap); +g_assert (BDRV_SECTOR_SIZE <<hbitmap_granularity (bitmap->bitmap) == + bitmap->granularity); +return bitmap->granularity; } void bdrv_dirty_iter_init(BlockDriverState *bs,
include/block/block.h +4 -0
@@ -435,6 +435,10 @@ BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs,BdrvDirtyBitmap *bdrv_find_dirty_bitmap (BlockDriverState *bs,const char *name);void bdrv_dirty_bitmap_make_anon (BlockDriverState *bs,BdrvDirtyBitmap *bitmap); +void bdrv_reset_dirty_bitmap (BlockDriverState *bs,BdrvDirtyBitmap *bitmap); +BdrvDirtyBitmap *bdrv_copy_dirty_bitmap (BlockDriverState *bs, +const BdrvDirtyBitmap *bitmap, +const char *name);void bdrv_release_dirty_bitmap (BlockDriverState *bs,BdrvDirtyBitmap *bitmap);BlockDirtyInfoList *bdrv_query_dirty_bitmaps (BlockDriverState *bs);uint64_t bdrv_dbm_calc_def_granularity (BlockDriverState *bs);
Signature · 1 line
1.9.3
Re: [Qemu-devel] [PATCH v8 05/10] block: Add bdrv_copy_dirty_bitmap and bdrv_reset_dirty_bitmap
Quoted 8 lines · John Snow
From: Fam Zheng <[email protected]>
Signed-off-by Fam Zheng <[email protected]>Signed-off-by John Snow <[email protected]>--- block.c | 35 +++++++++++++++++++++++++++++++---- include/block/block.h | 4 ++++ 2 files changed, 35 insertions(+), 4 deletions(-)
PATCH v8 6/10 qmp: Add block-dirty-bitmap-enable and block-dirty-bitmap-disable
In reply to John SnowFrom: Fam Zheng <[email protected]>
This allows to put the dirty bitmap into a disabled state where no more writes will be tracked.
It will be used before backup or writing to persistent file.
--- block.c | 15 +++++++++++++ blockdev.c | 61 +++++++++++++++++++++++++++++++++++++++++++++++++++ include/block/block.h | 2 ++ qapi/block-core.json | 28 +++++++++++++++++++++++ qmp-commands.hx | 10 +++++++++ 5 files changed, 116 insertions(+)
block.c +15 -0
@@ -56,6 +56,7 @@ struct BdrvDirtyBitmap {int64_t size;int64_t granularity;char *name; +bool enabled;QLIST_ENTRY (BdrvDirtyBitmap) list; };
@@ -5361,6 +5362,7 @@ BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, bitmap->granularity = granularity; bitmap->bitmap =hbitmap_alloc (bitmap->size,ffs (sector_granularity) -1 ); bitmap->name =g_strdup (name); + bitmap->enabled = true;QLIST_INSERT_HEAD (&bs->dirty_bitmaps, bitmap, list);return bitmap; }
@@ -5379,6 +5381,16 @@ void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap) } } +void bdrv_disable_dirty_bitmap (BdrvDirtyBitmap *bitmap) +{ + bitmap->enabled = false; +} + +void bdrv_enable_dirty_bitmap (BdrvDirtyBitmap *bitmap) +{ + bitmap->enabled = true; +} +BlockDirtyInfoList *bdrv_query_dirty_bitmaps (BlockDriverState *bs) {BdrvDirtyBitmap *bm;
@@ -5447,6 +5459,9 @@ void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector, {BdrvDirtyBitmap *bitmap; QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) { +if (!bitmap->enabled) { +continue ; + }hbitmap_set (bitmap->bitmap, cur_sector, nr_sectors); } }
blockdev.c +61 -0
73 lines not on this page · raw message
include/block/block.h +2 -0
@@ -440,6 +440,8 @@ BdrvDirtyBitmap *bdrv_copy_dirty_bitmap(BlockDriverState *bs,const BdrvDirtyBitmap *bitmap, const char *name);void bdrv_release_dirty_bitmap (BlockDriverState *bs,BdrvDirtyBitmap *bitmap); +void bdrv_disable_dirty_bitmap (BdrvDirtyBitmap *bitmap); +void bdrv_enable_dirty_bitmap (BdrvDirtyBitmap *bitmap);BlockDirtyInfoList *bdrv_query_dirty_bitmaps (BlockDriverState *bs);uint64_t bdrv_dbm_calc_def_granularity (BlockDriverState *bs); int64_t bdrv_dirty_bitmap_granularity(BlockDriverState *bs,
qapi/block-core.json +28 -0
@@ -919,6 +919,34 @@ 'data': 'BlockDirtyBitmap' } ## +# @block-dirty-bitmap-enable +# +# Enable a dirty bitmap on the device +# +# Returns: nothing on success +# If @device is not a valid block device, DeviceNotFound +# If @name is not found, GenericError with an explaining message +# +# Since 2.3 +## +{'command': 'block-dirty-bitmap-enable', + 'data': 'BlockDirtyBitmap' } + +## +# @block-dirty-bitmap-disable +# +# Disable a dirty bitmap on the device +# +# Returns: nothing on success +# If @device is not a valid block device, DeviceNotFound +# If @name is not found, GenericError with an explaining message +# +# Since 2.3 +## +{'command': 'block-dirty-bitmap-disable', + 'data': 'BlockDirtyBitmap' } + +## # @block_set_io_throttle: # # Change I/O throttle limits for a block drive.
qmp-commands.hx +10 -0
@@ -1211,6 +1211,16 @@ EQMP .args_type = "device:B,name:s", .mhandler.cmd_new = qmp_marshal_input_block_dirty_bitmap_remove, }, + { + .name = "block-dirty-bitmap-enable", + .args_type = "device:B,name:s", + .mhandler.cmd_new = qmp_marshal_input_block_dirty_bitmap_enable, + }, + { + .name = "block-dirty-bitmap-disable", + .args_type = "device:B,name:s", + .mhandler.cmd_new = qmp_marshal_input_block_dirty_bitmap_disable, + }, SQMP
Signature · 1 line
1.9.3
Re: [Qemu-devel] [PATCH v8 06/10] qmp: Add block-dirty-bitmap-enable and block-dirty-bitmap-disable
Quoted 69 lines · John Snow
From: Fam Zheng <[email protected]>
This allows to put the dirty bitmap into a disabled state where no more writes will be tracked.
It will be used before backup or writing to persistent file.
Signed-off-by Fam Zheng <[email protected]>Signed-off-by John Snow <[email protected]>--- block.c | 15 +++++++++++++ blockdev.c | 61 +++++++++++++++++++++++++++++++++++++++++++++++++++ include/block/block.h | 2 ++ qapi/block-core.json | 28 +++++++++++++++++++++++ qmp-commands.hx | 10 +++++++++ 5 files changed, 116 insertions(+)block.c +15
-0@@ -56,6 +56,7 @@ struct BdrvDirtyBitmap {int64_t size;int64_t granularity;char *name; +bool enabled;QLIST_ENTRY (BdrvDirtyBitmap) list; };@@ -5361,6 +5362,7 @@ BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, bitmap->granularity = granularity; bitmap->bitmap =hbitmap_alloc (bitmap->size,ffs (sector_granularity) -1 ); bitmap->name =g_strdup (name); + bitmap->enabled = true;QLIST_INSERT_HEAD (&bs->dirty_bitmaps, bitmap, list);return bitmap; }@@ -5379,6 +5381,16 @@ void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap) } } +void bdrv_disable_dirty_bitmap (BdrvDirtyBitmap *bitmap) +{ + bitmap->enabled = false; +} + +void bdrv_enable_dirty_bitmap (BdrvDirtyBitmap *bitmap) +{ + bitmap->enabled = true; +} +BlockDirtyInfoList *bdrv_query_dirty_bitmaps (BlockDriverState *bs) {BdrvDirtyBitmap *bm;@@ -5447,6 +5459,9 @@ void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector, {BdrvDirtyBitmap *bitmap; QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) { +if (!bitmap->enabled) { +continue ; + }hbitmap_set (bitmap->bitmap, cur_sector, nr_sectors); } }blockdev.c +0
-0
blockdev.c SnapshotInfo *qmp_blockdev_snapshot_delete_internal_sync(const char *device, · line 1159
Quoted 1 line
blockdev.c +0
-0@@ -1159,6 +1159,41 @@ SnapshotInfo *qmp_blockdev_snapshot_delete_internal_sync(const char *device,return info;
This conflicts with Stefan's AioContext series, so it doesn't apply to block-next. The above line should read "return NULL;" instead.
Quoted 28 lines
blockdev.c +26
-0} +/** +* Return a dirty bitmap (if present), after validating +* the device and bitmap names. Returns NULL on error, +* including when the device and/or bitmap is not found. +*/ +static BdrvDirtyBitmap *block_dirty_bitmap_lookup (const char *device, +const char *name, +Error **errp) +{ +BlockDriverState *bs; +BdrvDirtyBitmap *bitmap; + +if (!device) { +error_setg (errp,"Device cannot be NULL" ); +return NULL ; + } +if (!name) { +error_setg (errp,"Bitmap name cannot be NULL" ); +return NULL ; + } + + bs =bdrv_lookup_bs (device,NULL , errp); +if (!bs) { +return NULL ; + } +
blockdev.c SnapshotInfo *qmp_blockdev_snapshot_delete_internal_sync(const char *device, · line 1197
Quoted 10 lines
blockdev.c +9
-0+ bitmap =bdrv_find_dirty_bitmap (bs, name); +if (!bitmap) { +error_setg (errp,"Dirty bitmap not found: %s" , name); +return NULL ; + } + +return bitmap; +} +/* New and old BlockDriverState structs for group snapshots */
And this line should read "/* New and old BlockDriverState structs for atomic group operations */". With those changes it applies.
With that changed (it's not even a change of the code, just a change of the patch):
PATCH v8 7/10 qmp: Add support of "dirty-bitmap" sync mode for drive-backup
In reply to John SnowFrom: Fam Zheng <[email protected]>
For "dirty-bitmap" sync mode, the block job will iterate through the given dirty bitmap to decide if a sector needs backup (backup all the dirty clusters and skip clean ones), just as allocation conditions of "top" sync mode.
There are two bitmap use modes for sync=dirty-bitmap:
- reset: backup job makes a copy of bitmap and resets the original one.
- consume: backup job makes the original anonymous (invisible to user) and releases it after use.
--- block.c | 5 ++ block/backup.c | 130 ++++++++++++++++++++++++++++++++++++++-------- block/mirror.c | 4 ++ blockdev.c | 18 ++++++- hmp.c | 4 +- include/block/block.h | 1 + include/block/block_int.h | 6 +++ qapi/block-core.json | 30 +++++++++-- qmp-commands.hx | 7 +-- 9 files changed, 175 insertions(+), 30 deletions(-)
block.c +5 -0
@@ -5454,6 +5454,11 @@ void bdrv_dirty_iter_init(BlockDriverState *bs,hbitmap_iter_init (hbi, bitmap->bitmap,0 ); } +void bdrv_dirty_iter_set (HBitmapIter *hbi,int64_t offset) +{ +hbitmap_iter_init (hbi, hbi->hb, offset); +} +void bdrv_set_dirty (BlockDriverState *bs,int64_t cur_sector,int nr_sectors) {
block/backup.c +109 -21
198 lines not on this page · raw message
block/mirror.c +4 -0
@@ -714,6 +714,10 @@ void mirror_start(BlockDriverState *bs, BlockDriverState *target,bool is_none_mode;BlockDriverState *base; +if (mode ==MIRROR_SYNC_MODE_DIRTY_BITMAP ) { +error_setg (errp,"Sync mode 'dirty-bitmap' not supported" ); +return ; + } is_none_mode = mode ==MIRROR_SYNC_MODE_NONE ; base = mode ==MIRROR_SYNC_MODE_TOP ? bs->backing_hd :NULL ; mirror_start_job(bs, target, replaces,
blockdev.c +17 -1
@@ -1505,6 +1505,8 @@ static void drive_backup_prepare(BlkTransactionState *common, Error **errp) backup->sync, backup->has_mode, backup->mode, backup->has_speed, backup->speed, + backup->has_bitmap, backup->bitmap, + backup->has_bitmap_use_mode, backup->bitmap_use_mode, backup->has_on_source_error, backup->on_source_error, backup->has_on_target_error, backup->on_target_error, &local_err);
@@ -2235,6 +2237,8 @@ void qmp_drive_backup(const char *device, const char *target,enum MirrorSyncMode sync, bool has_mode, enum NewImageMode mode, bool has_speed, int64_t speed, + bool has_bitmap, const char *bitmap, + bool has_bitmap_use_mode, enum BitmapUseMode bitmap_mode, bool has_on_source_error, BlockdevOnError on_source_error, bool has_on_target_error, BlockdevOnError on_target_error, Error **errp)
@@ -2242,6 +2246,7 @@ void qmp_drive_backup(const char *device, const char *target,BlockDriverState *bs;BlockDriverState *target_bs;BlockDriverState *source =NULL ; +BdrvDirtyBitmap *bmap =NULL ;AioContext *aio_context;BlockDriver *drv =NULL ;Error *local_err =NULL ;
@@ -2337,7 +2342,18 @@ void qmp_drive_backup(const char *device, const char *target,bdrv_set_aio_context (target_bs, aio_context); -backup_start (bs, target_bs, speed, sync, on_source_error, on_target_error, +if (has_bitmap) { + bmap =bdrv_find_dirty_bitmap (bs, bitmap); +if (!bmap) { +error_setg (errp,"A bitmap name was given, but bitmap '%s' could not be found" , + bitmap); + goto out; + } + } + +backup_start (bs, target_bs, speed, sync, bmap, + has_bitmap_use_mode ? bitmap_mode :BITMAP_USE_MODE_RESET , + on_source_error, on_target_error, block_job_cb, bs, &local_err);if (local_err !=NULL ) {bdrv_unref (target_bs);
hmp.c +3 -1
@@ -966,7 +966,9 @@ void hmp_drive_backup(Monitor *mon, const QDict *qdict)qmp_drive_backup (device, filename, !!format, format, full ?MIRROR_SYNC_MODE_FULL :MIRROR_SYNC_MODE_TOP , - true, mode, false,0 , false,0 , false,0 , &err); + true, mode, false,0 , false,NULL , + false,0 , + false,0 , false,0 , &err);hmp_handle_error (mon, &err); }
include/block/block.h +1 -0
@@ -451,6 +451,7 @@ void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors);void bdrv_reset_dirty (BlockDriverState *bs,int64_t cur_sector,int nr_sectors);void bdrv_dirty_iter_init (BlockDriverState *bs,BdrvDirtyBitmap *bitmap,struct HBitmapIter *hbi); +void bdrv_dirty_iter_set (struct HBitmapIter *hbi,int64_t offset);int64_t bdrv_get_dirty_count (BlockDriverState *bs,BdrvDirtyBitmap *bitmap);void bdrv_enable_copy_on_read (BlockDriverState *bs);
include/block/block_int.h +6 -0
@@ -571,6 +571,10 @@ void mirror_start(BlockDriverState *bs, BlockDriverState *target,* @target: Block device to write to. * @speed: The maximum speed, in bytes per second, or 0 for unlimited. * @sync_mode: What parts of the disk image should be copied to the destination. +* @sync_bitmap: The dirty bitmap if sync_mode is MIRROR_SYNC_MODE_DIRTY_BITMAP. +* @bitmap_mode: BITMAP_USE_MODE_{CONSUME, RESET} +* Reset: Make a copy and reset the original bitmap. +* Consume: Anonymize the bitmap and free it after completion. * @on_source_error: The action to take upon error reading from the source. * @on_target_error: The action to take upon error writing to the target. * @cb: Completion function for the job.
@@ -581,6 +585,8 @@ void mirror_start(BlockDriverState *bs, BlockDriverState *target,*/ void backup_start(BlockDriverState *bs, BlockDriverState *target, int64_t speed, MirrorSyncMode sync_mode, + BdrvDirtyBitmap *sync_bitmap, + BitmapUseMode bitmap_mode, BlockdevOnError on_source_error, BlockdevOnError on_target_error, BlockCompletionFunc *cb, void *opaque,
qapi/block-core.json +26 -4
@@ -470,7 +470,7 @@ # Since: 1.3 ## { 'enum': 'MirrorSyncMode', - 'data': ['top', 'full', 'none'] } + 'data': ['top', 'full', 'none', 'dirty-bitmap'] } ## # @BlockJobType:
@@ -633,6 +633,21 @@ '*format': 'str', '*mode': 'NewImageMode' } } ## +# @BitmapUseMode +# +# An enumeration that tells QEMU what operation to take when using a bitmap +# in drive backup sync mode dirty-bitmap. +# +# @consume: QEMU should just consume the bitmap and release it after using +# +# @reset: QEMU should reset the dirty bitmap +# +# Since: 2.3 +## +{ 'enum': 'BitmapUseMode', +'data': [ 'consume', 'reset' ] } + +## # @DriveBackup # # @device: the name of the device which should be copied.
@@ -645,14 +660,20 @@ # probe if @mode is 'existing', else the format of the source # # @sync: what parts of the disk image should be copied to the destination -# (all the disk, only the sectors allocated in the topmost image, or -# only new I/O). +# (all the disk, only the sectors allocated in the topmost image, from a +# dirty bitmap, or only new I/O). # # @mode: #optional whether and how QEMU should create a new image, default is # 'absolute-paths'. # # @speed: #optional the maximum speed, in bytes per second # +# @bitmap: #optional the name of dirty bitmap if sync is "dirty-bitmap" +# (Since 2.3) +# +# @bitmap-use-mode: #optional which operation to take when consuming @bitmap, +# default is reset. (Since 2.3) +# # @on-source-error: #optional the action to take on an error on the source, # default 'report'. 'stop' and 'enospc' can only be used # if the block device supports io-status (see BlockInfo).
@@ -670,7 +691,8 @@ { 'type': 'DriveBackup', 'data': { 'device': 'str', 'target': 'str', '*format': 'str', 'sync': 'MirrorSyncMode', '*mode': 'NewImageMode', - '*speed': 'int', + '*speed': 'int', '*bitmap': 'str', + '*bitmap-use-mode': 'BitmapUseMode', '*on-source-error': 'BlockdevOnError', '*on-target-error': 'BlockdevOnError' } }
qmp-commands.hx +4 -3
@@ -1048,7 +1048,7 @@ EQMP { .name = "drive-backup", .args_type = "sync:s,device:B,target:s,speed:i?,mode:s?,format:s?," - "on-source-error:s?,on-target-error:s?", + "bitmap:s?,on-source-error:s?,on-target-error:s?", .mhandler.cmd_new = qmp_marshal_input_drive_backup, },
@@ -1075,8 +1075,9 @@ Arguments: (json-string, optional) - "sync": what parts of the disk image should be copied to the destination; possibilities include "full" for all the disk, "top" for only the sectors - allocated in the topmost image, or "none" to only replicate new I/O - (MirrorSyncMode). + allocated in the topmost image, "dirty-bitmap" for only the dirty sectors in + the bitmap, or "none" to only replicate new I/O (MirrorSyncMode). +- "bitmap": dirty bitmap name for sync==dirty-bitmap - "mode": whether and how QEMU should create a new image (NewImageMode, optional, default 'absolute-paths') - "speed": the maximum speed, in bytes per second (json-int, optional)
Signature · 1 line
1.9.3
Re: [Qemu-devel] [PATCH v8 07/10] qmp: Add support of "dirty-bitmap" sync mode for drive-backup
Quoted 300 lines · John Snow
From: Fam Zheng <[email protected]>
For "dirty-bitmap" sync mode, the block job will iterate through the given dirty bitmap to decide if a sector needs backup (backup all the dirty clusters and skip clean ones), just as allocation conditions of "top" sync mode.
There are two bitmap use modes for sync=dirty-bitmap:
- reset: backup job makes a copy of bitmap and resets the original one.
- consume: backup job makes the original anonymous (invisible to user) and releases it after use.Signed-off-by Fam Zheng <[email protected]>Signed-off-by John Snow <[email protected]>--- block.c | 5 ++ block/backup.c | 130 ++++++++++++++++++++++++++++++++++++++-------- block/mirror.c | 4 ++ blockdev.c | 18 ++++++- hmp.c | 4 +- include/block/block.h | 1 + include/block/block_int.h | 6 +++ qapi/block-core.json | 30 +++++++++-- qmp-commands.hx | 7 +-- 9 files changed, 175 insertions(+), 30 deletions(-)block.c +5
-0@@ -5454,6 +5454,11 @@ void bdrv_dirty_iter_init(BlockDriverState *bs,hbitmap_iter_init (hbi, bitmap->bitmap,0 ); } +void bdrv_dirty_iter_set (HBitmapIter *hbi,int64_t offset) +{ +hbitmap_iter_init (hbi, hbi->hb, offset); +} +void bdrv_set_dirty (BlockDriverState *bs,int64_t cur_sector,int nr_sectors) {block/backup.c +109
-21@@ -37,6 +37,10 @@ typedef struct CowRequest { typedef struct BackupBlockJob { BlockJob common; BlockDriverState *target; + /* bitmap for sync=dirty-bitmap */ + BdrvDirtyBitmap *sync_bitmap; + /* dirty bitmap granularity */ + int64_t sync_bitmap_gran; MirrorSyncMode sync_mode; RateLimit limit; BlockdevOnError on_source_error;@@ -242,6 +246,31 @@ static void backup_complete(BlockJob *job, void *opaque)g_free (data); } +static bool yield_and_check (BackupBlockJob *job) +{ +if (block_job_is_cancelled (&job->common)) { +return true; + } + +/* we need to yield so that qemu_aio_flush() returns. +* (without, VM does not reboot) +*/ +if (job->common.speed) { +uint64_t delay_ns =ratelimit_calculate_delay (&job->limit, + job->sectors_read); + job->sectors_read =0 ; +block_job_sleep_ns (&job->common,QEMU_CLOCK_REALTIME , delay_ns); + }else { +block_job_sleep_ns (&job->common,QEMU_CLOCK_REALTIME ,0 ); + } + +if (block_job_is_cancelled (&job->common)) { +return true; + } + +return false; +} + static void coroutine_fn backup_run(void *opaque) {BackupBlockJob *job = opaque;@@ -254,13 +283,13 @@ static void coroutine_fn backup_run(void *opaque) };int64_t start, end;int ret =0 ; +bool error_is_read;QLIST_INIT (&job->inflight_reqs);qemu_co_rwlock_init (&job->flush_rwlock); start =0 ; - end =DIV_ROUND_UP (job->common.len /BDRV_SECTOR_SIZE , -BACKUP_SECTORS_PER_CLUSTER ); + end =DIV_ROUND_UP (job->common.len,BACKUP_CLUSTER_SIZE ); job->bitmap =hbitmap_alloc (end,0 );@@ -278,28 +307,44 @@ static void coroutine_fn backup_run(void *opaque)qemu_coroutine_yield (); job->common.busy = true; } + }else if (job->sync_mode ==MIRROR_SYNC_MODE_DIRTY_BITMAP ) { +/* Dirty Bitmap sync has a slightly different iteration method */ +HBitmapIter hbi; +int64_t sector; +int64_t cluster; +bool polyrhythmic; + +bdrv_dirty_iter_init (bs, job->sync_bitmap, &hbi); +/* Does the granularity happen to match our backup cluster size? */ + polyrhythmic = (job->sync_bitmap_gran !=BACKUP_CLUSTER_SIZE ); + +/* Find the next dirty /sector/ and copy that /cluster/ */ +while ((sector =hbitmap_iter_next (&hbi)) !=-1 ) { +if (yield_and_check (job)) { + goto leave; + } + cluster = sector /BACKUP_SECTORS_PER_CLUSTER ; + +do { + ret =backup_do_cow (bs, cluster *BACKUP_SECTORS_PER_CLUSTER , +BACKUP_SECTORS_PER_CLUSTER , &error_is_read); +if ((ret <0 ) && +backup_error_action (job, error_is_read, -ret) == +BLOCK_ERROR_ACTION_REPORT ) { + goto leave; + } + }while (ret <0 ); + +/* Advance (or rewind) our iterator if we need to. */ +if (polyrhythmic) { +bdrv_dirty_iter_set (&hbi, + (cluster +1 ) *BACKUP_SECTORS_PER_CLUSTER ); + } + } }else {/* Both FULL and TOP SYNC_MODE's require copying.. */ for (; start < end; start++) { -bool error_is_read; - -if (block_job_is_cancelled (&job->common)) { -break ; - } - -/* we need to yield so that qemu_aio_flush() returns. -* (without, VM does not reboot) -*/ -if (job->common.speed) { -uint64_t delay_ns =ratelimit_calculate_delay ( - &job->limit, job->sectors_read); - job->sectors_read =0 ; -block_job_sleep_ns (&job->common,QEMU_CLOCK_REALTIME , delay_ns); - }else { -block_job_sleep_ns (&job->common,QEMU_CLOCK_REALTIME ,0 ); - } - -if (block_job_is_cancelled (&job->common)) { +if (yield_and_check (job)) {break ; }@@ -351,12 +396,16 @@ static void coroutine_fn backup_run(void *opaque) } } +leave:notifier_with_return_remove (&before_write);/* wait until pending backup_do_cow() calls have completed */ qemu_co_rwlock_wrlock (&job->flush_rwlock);qemu_co_rwlock_unlock (&job->flush_rwlock); +if (job->sync_bitmap) { +bdrv_release_dirty_bitmap (bs, job->sync_bitmap); + }hbitmap_free (job->bitmap);bdrv_iostatus_disable (target);@@ -368,12 +417,15 @@ static void coroutine_fn backup_run(void *opaque)void backup_start (BlockDriverState *bs,BlockDriverState *target,int64_t speed,MirrorSyncMode sync_mode, +BdrvDirtyBitmap *sync_bitmap, +BitmapUseMode bitmap_mode,BlockdevOnError on_source_error,BlockdevOnError on_target_error,BlockCompletionFunc *cb,void *opaque,Error **errp) {int64_t len; +BdrvDirtyBitmap *original;assert (bs);assert (target);@@ -386,6 +438,36 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,return ; } +if (sync_mode ==MIRROR_SYNC_MODE_DIRTY_BITMAP ) { +if (!sync_bitmap) { +error_setg (errp,"must provide a valid bitmap name for " +"\"dirty-bitmap\" sync mode" ); +return ; + } + +switch (bitmap_mode) { +case BITMAP_USE_MODE_RESET : + original = sync_bitmap; + sync_bitmap =bdrv_copy_dirty_bitmap (bs, sync_bitmap,NULL ); +bdrv_reset_dirty_bitmap (bs, original); +break ; +case BITMAP_USE_MODE_CONSUME : +bdrv_dirty_bitmap_make_anon (bs, sync_bitmap); +break ; +default : +error_setg (errp,"Invalid BitmapUseMode (%s) given to backup_start" , + BitmapUseMode_lookup[bitmap_mode]); +return ; + } +bdrv_disable_dirty_bitmap (sync_bitmap); + }else if (sync_bitmap) { +error_setg (errp, +"a sync_bitmap was provided to backup_run, " +"but received an incompatible sync_mode (%s)" , + BitmapUseMode_lookup[sync_mode]); +return ; + } + len =bdrv_getlength (bs);if (len <0 ) { error_setg_errno(errp, -len, "unable to get length for '%s'",@@ -403,6 +485,12 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target, job->on_target_error = on_target_error; job->target = target; job->sync_mode = sync_mode; + job->sync_bitmap = sync_mode ==MIRROR_SYNC_MODE_DIRTY_BITMAP ? + sync_bitmap :NULL ; +if (sync_bitmap) { + job->sync_bitmap_gran = +bdrv_dirty_bitmap_granularity (bs, job->sync_bitmap); + } job->common.len = len; job->common.co =qemu_coroutine_create (backup_run);qemu_coroutine_enter (job->common.co, job);block/mirror.c +4
-0@@ -714,6 +714,10 @@ void mirror_start(BlockDriverState *bs, BlockDriverState *target,bool is_none_mode;BlockDriverState *base; +if (mode ==MIRROR_SYNC_MODE_DIRTY_BITMAP ) { +error_setg (errp,"Sync mode 'dirty-bitmap' not supported" ); +return ; + } is_none_mode = mode ==MIRROR_SYNC_MODE_NONE ; base = mode ==MIRROR_SYNC_MODE_TOP ? bs->backing_hd :NULL ; mirror_start_job(bs, target, replaces,blockdev.c +5
-0@@ -1505,6 +1505,8 @@ static void drive_backup_prepare(BlkTransactionState *common, Error **errp) backup->sync, backup->has_mode, backup->mode, backup->has_speed, backup->speed, + backup->has_bitmap, backup->bitmap, + backup->has_bitmap_use_mode, backup->bitmap_use_mode, backup->has_on_source_error, backup->on_source_error, backup->has_on_target_error, backup->on_target_error, &local_err);@@ -2235,6 +2237,8 @@ void qmp_drive_backup(const char *device, const char *target,enum MirrorSyncMode sync, bool has_mode, enum NewImageMode mode, bool has_speed, int64_t speed, + bool has_bitmap, const char *bitmap, + bool has_bitmap_use_mode, enum BitmapUseMode bitmap_mode, bool has_on_source_error, BlockdevOnError on_source_error, bool has_on_target_error, BlockdevOnError on_target_error, Error **errp)@@ -2242,6 +2246,7 @@ void qmp_drive_backup(const char *device, const char *target,BlockDriverState *bs;BlockDriverState *target_bs;BlockDriverState *source =NULL ; +BdrvDirtyBitmap *bmap =NULL ;AioContext *aio_context;BlockDriver *drv =NULL ;Error *local_err =NULL ;
blockdev.c void qmp_drive_backup(const char *device, const char *target, · line 2348
Quoted 8 lines
blockdev.c +4
-1@@ -2337,7 +2342,18 @@ void qmp_drive_backup(const char *device, const char *target,bdrv_set_aio_context (target_bs, aio_context); - backup_start(bs, target_bs, speed, sync, on_source_error, on_target_error, +if (has_bitmap) { + bmap =bdrv_find_dirty_bitmap (bs, bitmap); +if (!bmap) { + error_setg(errp, "A bitmap name was given, but bitmap '%s' could not be found",
This line is too long.
Fam
Quoted 158 lines
blockdev.c +8
-0+ bitmap); + goto out; + } + } + +backup_start (bs, target_bs, speed, sync, bmap, + has_bitmap_use_mode ? bitmap_mode :BITMAP_USE_MODE_RESET , + on_source_error, on_target_error, block_job_cb, bs, &local_err);if (local_err !=NULL ) {bdrv_unref (target_bs);hmp.c +3
-1@@ -966,7 +966,9 @@ void hmp_drive_backup(Monitor *mon, const QDict *qdict)qmp_drive_backup (device, filename, !!format, format, full ?MIRROR_SYNC_MODE_FULL :MIRROR_SYNC_MODE_TOP , - true, mode, false,0 , false,0 , false,0 , &err); + true, mode, false,0 , false,NULL , + false,0 , + false,0 , false,0 , &err);hmp_handle_error (mon, &err); }include/block/block.h +1
-0@@ -451,6 +451,7 @@ void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors);void bdrv_reset_dirty (BlockDriverState *bs,int64_t cur_sector,int nr_sectors);void bdrv_dirty_iter_init (BlockDriverState *bs,BdrvDirtyBitmap *bitmap,struct HBitmapIter *hbi); +void bdrv_dirty_iter_set (struct HBitmapIter *hbi,int64_t offset);int64_t bdrv_get_dirty_count (BlockDriverState *bs,BdrvDirtyBitmap *bitmap);void bdrv_enable_copy_on_read (BlockDriverState *bs);include/block/block_int.h +6
-0@@ -571,6 +571,10 @@ void mirror_start(BlockDriverState *bs, BlockDriverState *target,* @target: Block device to write to. * @speed: The maximum speed, in bytes per second, or 0 for unlimited. * @sync_mode: What parts of the disk image should be copied to the destination. +* @sync_bitmap: The dirty bitmap if sync_mode is MIRROR_SYNC_MODE_DIRTY_BITMAP. +* @bitmap_mode: BITMAP_USE_MODE_{CONSUME, RESET} +* Reset: Make a copy and reset the original bitmap. +* Consume: Anonymize the bitmap and free it after completion. * @on_source_error: The action to take upon error reading from the source. * @on_target_error: The action to take upon error writing to the target. * @cb: Completion function for the job. @@ -581,6 +585,8 @@ void mirror_start(BlockDriverState *bs, BlockDriverState *target,*/ void backup_start(BlockDriverState *bs, BlockDriverState *target, int64_t speed, MirrorSyncMode sync_mode, + BdrvDirtyBitmap *sync_bitmap, + BitmapUseMode bitmap_mode, BlockdevOnError on_source_error, BlockdevOnError on_target_error, BlockCompletionFunc *cb, void *opaque,qapi/block-core.json +26
-4@@ -470,7 +470,7 @@ # Since: 1.3 ## { 'enum': 'MirrorSyncMode', - 'data': ['top', 'full', 'none'] } + 'data': ['top', 'full', 'none', 'dirty-bitmap'] } ## # @BlockJobType:@@ -633,6 +633,21 @@ '*format': 'str', '*mode': 'NewImageMode' } } ## +# @BitmapUseMode +# +# An enumeration that tells QEMU what operation to take when using a bitmap +# in drive backup sync mode dirty-bitmap. +# +# @consume: QEMU should just consume the bitmap and release it after using +# +# @reset: QEMU should reset the dirty bitmap +# +# Since: 2.3 +## +{ 'enum': 'BitmapUseMode', +'data': [ 'consume', 'reset' ] } + +## # @DriveBackup # # @device: the name of the device which should be copied.@@ -645,14 +660,20 @@ # probe if @mode is 'existing', else the format of the source # # @sync: what parts of the disk image should be copied to the destination -# (all the disk, only the sectors allocated in the topmost image, or -# only new I/O). +# (all the disk, only the sectors allocated in the topmost image, from a +# dirty bitmap, or only new I/O). # # @mode: #optional whether and how QEMU should create a new image, default is # 'absolute-paths'. # # @speed: #optional the maximum speed, in bytes per second # +# @bitmap: #optional the name of dirty bitmap if sync is "dirty-bitmap" +# (Since 2.3) +# +# @bitmap-use-mode: #optional which operation to take when consuming @bitmap, +# default is reset. (Since 2.3) +# # @on-source-error: #optional the action to take on an error on the source, # default 'report'. 'stop' and 'enospc' can only be used # if the block device supports io-status (see BlockInfo).@@ -670,7 +691,8 @@ { 'type': 'DriveBackup', 'data': { 'device': 'str', 'target': 'str', '*format': 'str', 'sync': 'MirrorSyncMode', '*mode': 'NewImageMode', - '*speed': 'int', + '*speed': 'int', '*bitmap': 'str', + '*bitmap-use-mode': 'BitmapUseMode', '*on-source-error': 'BlockdevOnError', '*on-target-error': 'BlockdevOnError' } }qmp-commands.hx +4
-3@@ -1048,7 +1048,7 @@ EQMP { .name = "drive-backup", .args_type = "sync:s,device:B,target:s,speed:i?,mode:s?,format:s?," - "on-source-error:s?,on-target-error:s?", + "bitmap:s?,on-source-error:s?,on-target-error:s?", .mhandler.cmd_new = qmp_marshal_input_drive_backup, },@@ -1075,8 +1075,9 @@ Arguments: (json-string, optional) - "sync": what parts of the disk image should be copied to the destination; possibilities include "full" for all the disk, "top" for only the sectors - allocated in the topmost image, or "none" to only replicate new I/O - (MirrorSyncMode). + allocated in the topmost image, "dirty-bitmap" for only the dirty sectors in + the bitmap, or "none" to only replicate new I/O (MirrorSyncMode). +- "bitmap": dirty bitmap name for sync==dirty-bitmap - "mode": whether and how QEMU should create a new image (NewImageMode, optional, default 'absolute-paths') - "speed": the maximum speed, in bytes per second (json-int, optional)Signature · 1 line
1.9.3
Re: [Qemu-devel] [PATCH v8 07/10] qmp: Add support of "dirty-bitmap" sync mode for drive-backup
In reply to John SnowQuoted 27 lines · John Snow
From: Fam Zheng <[email protected]>
For "dirty-bitmap" sync mode, the block job will iterate through the given dirty bitmap to decide if a sector needs backup (backup all the dirty clusters and skip clean ones), just as allocation conditions of "top" sync mode.
There are two bitmap use modes for sync=dirty-bitmap:
- reset: backup job makes a copy of bitmap and resets the original one.
- consume: backup job makes the original anonymous (invisible to user) and releases it after use.Signed-off-by Fam Zheng <[email protected]>Signed-off-by John Snow <[email protected]>--- block.c | 5 ++ block/backup.c | 130 ++++++++++++++++++++++++++++++++++++++-------- block/mirror.c | 4 ++ blockdev.c | 18 ++++++- hmp.c | 4 +- include/block/block.h | 1 + include/block/block_int.h | 6 +++ qapi/block-core.json | 30 +++++++++-- qmp-commands.hx | 7 +-- 9 files changed, 175 insertions(+), 30 deletions(-)
[snip]
Quoted 18 lines
block/backup.c +10
-0@@ -386,6 +438,36 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,return ; } +if (sync_mode ==MIRROR_SYNC_MODE_DIRTY_BITMAP ) { +if (!sync_bitmap) { +error_setg (errp,"must provide a valid bitmap name for " +"\"dirty-bitmap\" sync mode" ); +return ; + } + +switch (bitmap_mode) { +case BITMAP_USE_MODE_RESET : + original = sync_bitmap;
block/backup.c void backup_start(BlockDriverState *bs, BlockDriverState *target, · line 460
Quoted 10 lines
block/backup.c +10
-0+ sync_bitmap =bdrv_copy_dirty_bitmap (bs, sync_bitmap,NULL ); +bdrv_reset_dirty_bitmap (bs, original); +break ; +case BITMAP_USE_MODE_CONSUME : +bdrv_dirty_bitmap_make_anon (bs, sync_bitmap); +break ; +default : +error_setg (errp,"Invalid BitmapUseMode (%s) given to backup_start" , + BitmapUseMode_lookup[bitmap_mode]); +return ;
Well, this is basically the opposite of what I'd done, but making it difficult by formatting a nice error message for the user in places which should never be reached instead of just aborting is not wrong, in my opinion (I do know that others have other opinions).
[snip]
Quoted 5 lines
blockdev.c +0
-0
blockdev.c void qmp_drive_backup(const char *device, const char *target, · line 2349
Quoted 9 lines
blockdev.c +5
-1@@ -2337,7 +2342,18 @@ void qmp_drive_backup(const char *device, const char *target,bdrv_set_aio_context (target_bs, aio_context); - backup_start(bs, target_bs, speed, sync, on_source_error, on_target_error, +if (has_bitmap) { + bmap =bdrv_find_dirty_bitmap (bs, bitmap); +if (!bmap) { +error_setg (errp,"A bitmap name was given, but bitmap '%s' could not be found" , + bitmap);
Well, I do know I said that I'd translate "has_bitmap was set" to "A bitmap name was specified", but I assumed you'd remove the redundancy yourself. ;-)
Since this line needs to be reworked anyway (see Fam's reply), it can be (imho) shortened to "Bitmap '%s' could not be found". The user should know that he/she has specified a bitmap, and that it did have that name; the only thing he/she doesn't know so far is that qemu failed to find that bitmap, so that's the information we need to give.
With that line somehow shortened/split to 80 characters (I'd be fine with keeping its content as-is, I just think it'd sound strange to the user):
PATCH v8 8/10 qapi: Add transaction support to block-dirty-bitmap-{add, enable, disable}
In reply to John SnowFrom: Fam Zheng <[email protected]>
This adds three qmp commands to transactions.
Users can stop a dirty bitmap, start backup of it, and start another dirty bitmap atomically, so that the dirty bitmap is tracked incrementally and we don't miss any write.
--- blockdev.c | 85 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ qapi-schema.json | 5 +++- 2 files changed, 89 insertions(+), 1 deletion(-)
blockdev.c +85 -0
@@ -1532,6 +1532,76 @@ static void drive_backup_abort(BlkTransactionState *common) } } +static void block_dirty_bitmap_add_prepare (BlkTransactionState *common, +Error **errp) +{ +BlockDirtyBitmapAdd *action; + + action = common->action->block_dirty_bitmap_add; +qmp_block_dirty_bitmap_add (action->device, action->name, + action->has_granularity, action->granularity, + errp); +} + +static void block_dirty_bitmap_add_abort (BlkTransactionState *common) +{ +BlockDirtyBitmapAdd *action; +BdrvDirtyBitmap *bm; +BlockDriverState *bs; + + action = common->action->block_dirty_bitmap_add; + bs =bdrv_lookup_bs (action->device,NULL ,NULL ); +if (bs) { + bm =bdrv_find_dirty_bitmap (bs, action->name); +if (bm) { +bdrv_release_dirty_bitmap (bs, bm); + } + } +} + +typedef struct BlockDirtyBitmapState { +BlkTransactionState common; +BdrvDirtyBitmap *bitmap; +}BlockDirtyBitmapState ; + +/** +* Enable and Disable re-uses the same preparation. +*/ +static void block_dirty_bitmap_en_toggle_prepare (BlkTransactionState *common, +Error **errp) +{ +BlockDirtyBitmapState *state =DO_UPCAST (BlockDirtyBitmapState, + common, common); +BlockDirtyBitmap *action; + +/* We may be used by either enable or disable; +* We use the "enable" member of the union here, +* but "disable" should be functionally equivalent: */ + action = common->action->block_dirty_bitmap_enable; +assert (action == common->action->block_dirty_bitmap_disable); + + state->bitmap =block_dirty_bitmap_lookup (action->device, + action->name, + errp); +if (!state->bitmap) { +return ; + } +} + +static void block_dirty_bitmap_enable_commit (BlkTransactionState *common) +{ +BlockDirtyBitmapState *state =DO_UPCAST (BlockDirtyBitmapState, + common, common); +bdrv_enable_dirty_bitmap (state->bitmap); +} + +static void block_dirty_bitmap_disable_commit (BlkTransactionState *common) +{ +BlockDirtyBitmapState *state =DO_UPCAST (BlockDirtyBitmapState, + common, common); +bdrv_disable_dirty_bitmap (state->bitmap); +} +static void abort_prepare (BlkTransactionState *common,Error **errp) {error_setg (errp,"Transaction aborted using Abort action" );
@@ -1564,6 +1634,21 @@ static const BdrvActionOps actions[] = { .prepare = internal_snapshot_prepare, .abort = internal_snapshot_abort, }, + [TRANSACTION_ACTION_KIND_BLOCK_DIRTY_BITMAP_ADD] = { + .instance_size = sizeof(BlkTransactionState), + .prepare = block_dirty_bitmap_add_prepare, + .abort = block_dirty_bitmap_add_abort, + }, + [TRANSACTION_ACTION_KIND_BLOCK_DIRTY_BITMAP_ENABLE] = { + .instance_size = sizeof(BlockDirtyBitmapState), + .prepare = block_dirty_bitmap_en_toggle_prepare, + .commit = block_dirty_bitmap_enable_commit, + }, + [TRANSACTION_ACTION_KIND_BLOCK_DIRTY_BITMAP_DISABLE] = { + .instance_size = sizeof(BlockDirtyBitmapState), + .prepare = block_dirty_bitmap_en_toggle_prepare, + .commit = block_dirty_bitmap_disable_commit, + }, };/*
qapi-schema.json +4 -1
@@ -1260,7 +1260,10 @@ 'blockdev-snapshot-sync': 'BlockdevSnapshot', 'drive-backup': 'DriveBackup', 'abort': 'Abort', - 'blockdev-snapshot-internal-sync': 'BlockdevSnapshotInternal' + 'blockdev-snapshot-internal-sync': 'BlockdevSnapshotInternal', + 'block-dirty-bitmap-add': 'BlockDirtyBitmapAdd', + 'block-dirty-bitmap-enable': 'BlockDirtyBitmap', + 'block-dirty-bitmap-disable': 'BlockDirtyBitmap' } } ##
Signature · 1 line
1.9.3
Re: [Qemu-devel] [PATCH v8 08/10] qapi: Add transaction support to block-dirty-bitmap-{add, enable, disable}
Quoted 14 lines · John Snow
From: Fam Zheng <[email protected]>
This adds three qmp commands to transactions.
Users can stop a dirty bitmap, start backup of it, and start another dirty bitmap atomically, so that the dirty bitmap is tracked incrementally and we don't miss any write.
Signed-off-by Fam Zheng <[email protected]>Signed-off-by John Snow <[email protected]>--- blockdev.c | 85 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ qapi-schema.json | 5 +++- 2 files changed, 89 insertions(+), 1 deletion(-)
[snip]
blockdev.c static const BdrvActionOps actions[] = { · line 1636
Quoted 8 lines
blockdev.c +0
-0@@ -1564,6 +1634,21 @@ static const BdrvActionOps actions[] = { .prepare = internal_snapshot_prepare, .abort = internal_snapshot_abort, },
I probably missed that in my review for v7 because I based that on my/Kevin's block-next branch instead of Stefan's (which I'm doing now): This conflicts with Stefan's AioContext series. Now there's a .clean, so it should read:
.abort = internal_snapshot_abort,
.clean = internal_snapshot_clean,
},
(Hopefully nbsps will keep Thunderbird from breaking the indentation...)
With that fixed:
PATCH v8 9/10 qmp: Add dirty bitmap 'enabled' field in query-block
In reply to John SnowFrom: Fam Zheng <[email protected]>
--- block.c | 1 + qapi/block-core.json | 5 ++++- 2 files changed, 5 insertions(+), 1 deletion(-)
block.c +1 -0
@@ -5404,6 +5404,7 @@ BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs) info->granularity =bdrv_dirty_bitmap_granularity (bs, bm); info->has_name = !!bm->name; info->name =g_strdup (bm->name); + info->enabled = bm->enabled; entry->value = info; *plist = entry; plist = &entry->next;
qapi/block-core.json +4 -1
@@ -310,10 +310,13 @@ # # @granularity: granularity of the dirty bitmap in bytes (since 1.4) # +# @enabled: whether the dirty bitmap is enabled (Since 2.3) +# # Since: 1.3 ## { 'type': 'BlockDirtyInfo', - 'data': {'*name': 'str', 'count': 'int', 'granularity': 'int'} } + 'data': {'*name': 'str', 'count': 'int', 'granularity': 'int', + 'enabled': 'bool'} } ## # @BlockInfo:
Signature · 1 line
1.9.3
Re: [Qemu-devel] [PATCH v8 09/10] qmp: Add dirty bitmap 'enabled' field in query-block
Quoted 8 lines · John Snow
From: Fam Zheng <[email protected]>
Signed-off-by Fam Zheng <[email protected]>Signed-off-by John Snow <[email protected]>--- block.c | 1 + qapi/block-core.json | 5 ++++- 2 files changed, 5 insertions(+), 1 deletion(-)
PATCH v8 10/10 qemu-iotests: Add tests for drive-backup sync=dirty-bitmap
In reply to John SnowFrom: Fam Zheng <[email protected]>
--- tests/qemu-iotests/056 | 33 ++++++++++++++++++++++++++++++--- tests/qemu-iotests/056.out | 4 ++-- tests/qemu-iotests/iotests.py | 8 ++++++++ 3 files changed, 40 insertions(+), 5 deletions(-)
tests/qemu-iotests/056 +30 -3
@@ -23,17 +23,17 @@ import time import os import iotests -from iotests import qemu_img, qemu_io, create_image +from iotests import qemu_img, qemu_img_map_assert, qemu_io, create_image backing_img = os.path.join(iotests.test_dir, 'backing.img') test_img = os.path.join(iotests.test_dir, 'test.img') target_img = os.path.join(iotests.test_dir, 'target.img') -class TestSyncModesNoneAndTop(iotests.QMPTestCase): +class TestSyncModes(iotests.QMPTestCase): image_len = 64 * 1024 * 1024 # MB def setUp(self): - create_image(backing_img, TestSyncModesNoneAndTop.image_len) + create_image(backing_img, TestSyncModes.image_len) qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % backing_img, test_img) qemu_io('-c', 'write -P0x41 0 512', test_img) qemu_io('-c', 'write -P0xd5 1M 32k', test_img)
@@ -64,6 +64,33 @@ class TestSyncModesNoneAndTop(iotests.QMPTestCase): self.assertTrue(iotests.compare_images(test_img, target_img), 'target image does not match source after backup') + def test_sync_dirty_bitmap_missing(self): + self.assert_no_active_block_jobs() + result = self.vm.qmp('drive-backup', device='drive0', sync='dirty-bitmap', + format=iotests.imgfmt, target=target_img) + self.assert_qmp(result, 'error/class', 'GenericError') + + def test_sync_dirty_bitmap_not_found(self): + self.assert_no_active_block_jobs() + result = self.vm.qmp('drive-backup', device='drive0', sync='dirty-bitmap', + bitmap='unknown', + format=iotests.imgfmt, target=target_img) + self.assert_qmp(result, 'error/class', 'GenericError') + + def test_sync_dirty_bitmap(self): + self.assert_no_active_block_jobs() + result = self.vm.qmp('block-dirty-bitmap-add', device='drive0', name='bitmap0') + self.assert_qmp(result, 'return', {}) + self.vm.hmp_qemu_io('drive0', 'write -P0x5a 0 512') + self.vm.hmp_qemu_io('drive0', 'write -P0x5a 48M 512') + result = self.vm.qmp('drive-backup', device='drive0', sync='dirty-bitmap', + bitmap='bitmap0', + format=iotests.imgfmt, target=target_img) + self.assert_qmp(result, 'return', {}) + self.wait_until_completed(check_offset=False) + self.assert_no_active_block_jobs() + qemu_img_map_assert(target_img, [0, 0x3000000]) + def test_cancel_sync_none(self): self.assert_no_active_block_jobs()
tests/qemu-iotests/056.out +2 -2
@@ -1,5 +1,5 @@ -.. +..... ---------------------------------------------------------------------- -Ran 2 tests +Ran 5 tests OK
tests/qemu-iotests/iotests.py +8 -0
@@ -55,6 +55,14 @@ def qemu_img_pipe(*args): '''Run qemu-img and return its output''' return subprocess.Popen(qemu_img_args + list(args), stdout=subprocess.PIPE).communicate()[0] +def qemu_img_map_assert(img, offsets): + '''Run qemu-img map on img and check the mapped ranges''' + offs = [] + for line in qemu_img_pipe('map', img).splitlines()[1:]: + offset, length, mapped, fname = line.split() + offs.append(int(offset, 16)) + assert set(offs) == set(offsets), "mapped offsets in image '%s' not equal to '%s'" % (str(offs), str(offsets)) + def qemu_io(*args): '''Run qemu-io and return the stdout data''' args = qemu_io_args + list(args)
Signature · 1 line
1.9.3
Re: [Qemu-devel] [PATCH v8 10/10] qemu-iotests: Add tests for drive-backup sync=dirty-bitmap
Quoted 9 lines · John Snow
From: Fam Zheng <[email protected]>
Signed-off-by Fam Zheng <[email protected]>Signed-off-by John Snow <[email protected]>--- tests/qemu-iotests/056 | 33 ++++++++++++++++++++++++++++++--- tests/qemu-iotests/056.out | 4 ++-- tests/qemu-iotests/iotests.py | 8 ++++++++ 3 files changed, 40 insertions(+), 5 deletions(-)