Skip to contentSkip to conversation

perf tools: Add perf data CTF conversion

PATCH Superseded Jiri Olsa 3 participants 15 messages Dec 3, 2014 – Dec 9, 2014 perf events

v1 of 6 Superseded Latest is v6 →

lore
Share & tools
lore

Jiri Olsa

author reviewer
#0 lore raw

cover perf tools: Add perf data CTF conversion

hi,
this is follow up on original RFC patchset:
http://marc.info/?t=140732735600004&r=1&w=2

Basically we are adding 'perf data convert' command to allow conversion of perf data file into CTF [1] data.

Changes from RFC:
- able to generate CTF data, that are possible to be displayed under tracecompas GUI [3], please check several screenshots in here [4]
- storing CTF data streams per cpu
- several cleanups

Examples:
- Catch default perf data (cycles event):

  $ perf record ls
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.012 MB perf.data (~546 samples) ]

- To display converted CTF data run [2]:

  $ babeltrace ./ctf-data/
  [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
  [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
  [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
  [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
  [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 }
  [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 }
  [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 }
  [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 }
  [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 }

- To get some nice output in tracecompas GUI [3], please capture sched:* and syscall tracepoints like:

  # perf record -e 'sched:*,raw_syscalls:*' -a
  ^C[ perf record: Woken up 0 times to write data ]
  [ perf record: Captured and wrote 412.347 MB perf.data (~18015721 samples) ]

- To convert perf data file run:

  # perf data convert --to-ctf=./ctf 
  [ perf data convert: Converted 'perf.data' into CTF data './ctf' ]
  [ perf data convert: Converted and wrote 408.421 MB (3964792 samples) ]

- To display converted CTF data run [2]:

  # babeltrace ./ctf-data/
  [23:32:20.165354855] (+0.000000507) sched:sched_wakeup: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF810BCA72, perf_tid = 0, perf_pid = 0, perf_id = 462554, perf_period = 1, common_type = 265, ...
  [23:32:20.165359078] (+0.000001181) sched:sched_switch: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF8172A110, perf_tid = 0, perf_pid = 0, perf_id = 462562, perf_period = 1, common_type = 263, ...
  [23:32:20.165364686] (+0.000000328) sched:sched_stat_runtime: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF810C8AE5, perf_tid = 5326, perf_pid = 5326, perf_id = 462610, perf_period = 11380, ...
  [23:32:20.165366067] (+0.000001205) sched:sched_switch: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF8172A110, perf_tid = 5326, perf_pid = 5326, perf_id = 462562, perf_period = 1, common_type  ...
  [23:32:20.165723312] (+0.000001479) sched:sched_stat_runtime: { cpu_id = 2 }, { perf_ip = 0xFFFFFFFF810C8AE5, perf_tid = 11821, perf_pid = 11821, perf_id = 462612, perf_period = 1000265, ...
  [23:32:20.065282391] (+?.?????????) raw_syscalls:sys_enter: { cpu_id = 1 }, { perf_ip = 0xFFFFFFFF810230AF, perf_tid = 26155, perf_pid = 26155, perf_id = 462635, perf_period = 1, ...
  [23:32:20.065286422] (+0.000004031) raw_syscalls:sys_exit: { cpu_id = 1 }, { perf_ip = 0xFFFFFFFF810231D8, perf_tid = 26155, perf_pid = 26155, perf_id = 462639, perf_period = 1, ...

- Or run tracecompass and open the CTF data ;-)

Changes are also reachable in here:
git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf.git
perf/core_ctf_convert

thanks,
jirka

[1] Common Trace Format - http://www.efficios.com/ctf
[2] babeltrace - http://www.efficios.com/babeltrace
[3] Trace compass - http://projects.eclipse.org/projects/tools.tracecompass
[4] screenshots - http://people.redhat.com/~jolsa/tracecompass-perf/

Cc Arnaldo Carvalho de Melo <[email protected]>
Cc David Ahern <[email protected]>
Cc Dominique Toupin <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Jeremie Galarneau <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Mathieu Desnoyers <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Sebastian Andrzej Siewior <[email protected]>
Cc Tom Zanussi <[email protected]>

---
Jiri Olsa (5):
perf tools: Add feature check for libbabeltrace perf tools: Add new perf data command
perf data: Add perf data to CTF conversion support perf data: Enable stream flush within processing perf data: Add support for setting ordered_events queue size

Sebastian Andrzej Siewior (3):
perf data: Add a 'perf' prefix to the generic fields perf data: Add tracepoint events fields CTF conversion support perf data: Switch to multiple cpu stream files

 tools/perf/Documentation/perf-data.txt                |   40 ++++
 tools/perf/Documentation/perf.txt                     |    7 +-
 tools/perf/Makefile.perf                              |    9 +-
 tools/perf/builtin-data.c                             |  119 ++++++++++
 tools/perf/builtin.h                                  |    1 +
 tools/perf/command-list.txt                           |    1 +
 tools/perf/config/Makefile                            |   24 ++
 tools/perf/config/feature-checks/Makefile             |    8 +-
 tools/perf/config/feature-checks/test-all.c           |    5 +
 tools/perf/config/feature-checks/test-libbabeltrace.c |    8 +
 tools/perf/perf.c                                     |    1 +
 tools/perf/util/data-convert-bt.c                     | 1060 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 tools/perf/util/data-convert-bt.h                     |    8 +
 tools/perf/util/debug.c                               |    2 +
 tools/perf/util/debug.h                               |    1 +
 15 files changed, 1290 insertions(+), 4 deletions(-)
 create mode 100644 tools/perf/Documentation/perf-data.txt
 create mode 100644 tools/perf/builtin-data.c
 create mode 100644 tools/perf/config/feature-checks/test-libbabeltrace.c
 create mode 100644 tools/perf/util/data-convert-bt.c
 create mode 100644 tools/perf/util/data-convert-bt.h
author reviewer
#1 lore raw

PATCH 1/8 perf tools: Add feature check for libbabeltrace

Adding feature check for babeltrace library [1], which will be used for perf data file CTF [2] conversion in following patches.

The babeltrace library is now automatically detected as standard feature. It's possible to specify LIBBABELTRACE_DIR make variable to specify location of installed libbabeltrace, like:

  $ make LIBBABELTRACE_DIR=/opt/libbabeltrace/
    BUILD:   Doing 'make -j4' parallel build

Auto-detecting system features:

  ...                         dwarf: [ on  ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ on  ]
  ...                      libaudit: [ on  ]
  ...                        libbfd: [ on  ]
  ...                        libelf: [ on  ]
  ...                       libnuma: [ on  ]
  ...                       libperl: [ on  ]
  ...                     libpython: [ on  ]
  ...                      libslang: [ on  ]
  ...                     libunwind: [ on  ]
  ...                 libbabeltrace: [ on  ]
  ...            libdw-dwarf-unwind: [ on  ]
  ...                          zlib: [ on  ]

... DWARF post unwind library: libunwind

[1] babeltrace - http://www.efficios.com/babeltrace
[2] Common Trace Format - http://www.efficios.com/ctf

Cc Arnaldo Carvalho de Melo <[email protected]>
Cc David Ahern <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Jeremie Galarneau <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Sebastian Andrzej Siewior <[email protected]>
Cc Tom Zanussi <[email protected]>
---
 tools/perf/Makefile.perf                           |  4 +++-
 tools/perf/config/Makefile                         | 24 ++++++++++++++++++++++
 tools/perf/config/feature-checks/Makefile          |  8 ++++++--
 tools/perf/config/feature-checks/test-all.c        |  5 +++++
 .../config/feature-checks/test-libbabeltrace.c     |  8 ++++++++
 5 files changed, 46 insertions(+), 3 deletions(-)
 create mode 100644 tools/perf/config/feature-checks/test-libbabeltrace.c
tools/perf/Makefile.perf +3 -1
index 478efa9b2364..3421c65130f1 100644
@@ -68,7 +68,9 @@ include config/utilities.mak
 # for reading the x32 mode 32-bit compatibility VDSO in 64-bit mode
 #
 # Define NO_ZLIB if you do not want to support compressed kernel modules
-
+#
+# Define NO_LIBBABELTRACE if you do not want libbabeltrace support
+# for CTF data format.
 
 ifeq ($(srctree),)
 srctree := $(patsubst %/,%,$(dir $(shell pwd)))
tools/perf/config/Makefile +24 -0
index 5d4b039fe1ed..e743aae5a1f3 100644
@@ -84,6 +84,17 @@ ifndef NO_LIBELF
   FEATURE_CHECK_LDFLAGS-libdw-dwarf-unwind := $(LIBDW_LDFLAGS) -ldw
 endif
 
+ifndef NO_LIBBABELTRACE
+  # for linking with debug library, run like:
+  # make DEBUG=1 LIBBABELTRACE_DIR=/opt/libdw/
+  ifdef LIBBABELTRACE_DIR
+    LIBBABELTRACE_CFLAGS  := -I$(LIBBABELTRACE_DIR)/include
+    LIBBABELTRACE_LDFLAGS := -L$(LIBBABELTRACE_DIR)/lib
+  endif
+  FEATURE_CHECK_CFLAGS-libbabeltrace := $(LIBBABELTRACE_CFLAGS)
+  FEATURE_CHECK_LDFLAGS-libbabeltrace := $(LIBBABELTRACE_LDFLAGS) -lbabeltrace-ctf
+endif
+
 # include ARCH specific config
 -include $(src-perf)/arch/$(ARCH)/Makefile
 
@@ -201,6 +212,7 @@ CORE_FEATURE_TESTS =			\
 	stackprotector-all		\
 	timerfd				\
 	libdw-dwarf-unwind		\
+	libbabeltrace			\
 	zlib
 
 LIB_FEATURE_TESTS =			\
@@ -216,6 +228,7 @@ LIB_FEATURE_TESTS =			\
 	libslang			\
 	libunwind			\
 	libdw-dwarf-unwind		\
+	libbabeltrace			\
 	zlib
 
 VF_FEATURE_TESTS =			\
@@ -661,6 +674,17 @@ else
   NO_PERF_READ_VDSOX32 := 1
 endif
 
+ifndef NO_LIBBABELTRACE
+  ifeq ($(feature-libbabeltrace), 0)
+    msg := $(warning No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-devel/libbabeltrace-dev);
+    NO_LIBBABELTRACE := 1
+  else
+    CFLAGS += -DHAVE_LIBBABELTRACE_SUPPORT $(LIBBABELTRACE_CFLAGS)
+    LDFLAGS += $(LIBBABELTRACE_LDFLAGS)
+    EXTLIBS += -lbabeltrace-ctf
+  endif
+endif
+
 # Among the variables below, these:
 #   perfexecdir
 #   template_dir
tools/perf/config/feature-checks/Makefile +6 -2
index 53f19b5dbc37..9d7536e39efd 100644
@@ -28,6 +28,7 @@ FILES=					\
 	test-stackprotector-all.bin	\
 	test-timerfd.bin		\
 	test-libdw-dwarf-unwind.bin	\
+	test-libbabeltrace.bin		\
 	test-compile-32.bin		\
 	test-compile-x32.bin		\
 	test-zlib.bin
@@ -42,7 +43,7 @@ BUILD = $(CC) $(CFLAGS) -o $(OUTPUT)$@ $(patsubst %.bin,%.c,$@) $(LDFLAGS)
 ###############################
 
 test-all.bin:
-	$(BUILD) -Werror -fstack-protector-all -O2 -Werror -D_FORTIFY_SOURCE=2 -ldw -lelf -lnuma -lelf -laudit -I/usr/include/slang -lslang $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null) $(FLAGS_PERL_EMBED) $(FLAGS_PYTHON_EMBED) -DPACKAGE='"perf"' -lbfd -ldl -lz
+	$(BUILD) -Werror -fstack-protector-all -O2 -Werror -D_FORTIFY_SOURCE=2 -ldw -lelf -lnuma -lelf -laudit -I/usr/include/slang -lslang $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null) $(FLAGS_PERL_EMBED) $(FLAGS_PYTHON_EMBED) -DPACKAGE='"perf"' -lbfd -ldl -lz -lbabeltrace
 
 test-hello.bin:
 	$(BUILD)
@@ -129,7 +130,10 @@ test-timerfd.bin:
 	$(BUILD)
 
 test-libdw-dwarf-unwind.bin:
-	$(BUILD)
+	$(BUILD) # -ldw provided by $(FEATURE_CHECK_LDFLAGS-libdw-dwarf-unwind)
+
+test-libbabeltrace.bin:
+	$(BUILD) # -lbabeltrace provided by $(FEATURE_CHECK_LDFLAGS-libbabeltrace)
 
 test-sync-compare-and-swap.bin:
 	$(BUILD) -Werror
tools/perf/config/feature-checks/test-all.c +5 -0
index 652e0098eba6..d63f5f2be9e3 100644
@@ -97,6 +97,10 @@
 # include "test-zlib.c"
 #undef main
 
+#define main main_test_libbabeltrace
+# include "test-libbabeltrace.c"
+#undef main
+
 int main(int argc, char *argv[])
 {
 	main_test_libpython();
@@ -121,6 +125,7 @@ int main(int argc, char *argv[])
 	main_test_libdw_dwarf_unwind();
 	main_test_sync_compare_and_swap(argc, argv);
 	main_test_zlib();
+	main_test_libbabeltrace();
 
 	return 0;
 }
tools/perf/config/feature-checks/test-libbabeltrace.c new file +8 -0
new file mode 100644
index 000000000000..3b7dd68a4d52
@@ -0,0 +1,8 @@
+
+#include <babeltrace/ctf-writer/writer.h>
+
+int main(void)
+{
+	bt_ctf_stream_class_get_packet_context_type((void *) 0);
+	return 0;
+}
Signature · 1 line
1.9.3
maintainer
#2 lore raw

Re: [PATCH 1/8] perf tools: Add feature check for libbabeltrace

Hi Jiri,

tools/perf/config/Makefile ifndef NO_LIBELF · line 89

Quoted 3 lines · Jiri Olsa
tools/perf/config/Makefile +3 -0
+ifndef NO_LIBBABELTRACE
+  # for linking with debug library, run like:
+  # make DEBUG=1 LIBBABELTRACE_DIR=/opt/libdw/

s/libdw/libbabeltrace/

Quoted 28 lines
tools/perf/config/Makefile +10 -0
+  ifdef LIBBABELTRACE_DIR
+    LIBBABELTRACE_CFLAGS  := -I$(LIBBABELTRACE_DIR)/include
+    LIBBABELTRACE_LDFLAGS := -L$(LIBBABELTRACE_DIR)/lib
+  endif
+  FEATURE_CHECK_CFLAGS-libbabeltrace := $(LIBBABELTRACE_CFLAGS)
+  FEATURE_CHECK_LDFLAGS-libbabeltrace := $(LIBBABELTRACE_LDFLAGS) -lbabeltrace-ctf
+endif
+
 # include ARCH specific config
 -include $(src-perf)/arch/$(ARCH)/Makefile
@@ -201,6 +212,7 @@ CORE_FEATURE_TESTS =                        \
        stackprotector-all              \
        timerfd                         \
        libdw-dwarf-unwind              \
+       libbabeltrace                   \
        zlib
 
 LIB_FEATURE_TESTS =                    \
@@ -216,6 +228,7 @@ LIB_FEATURE_TESTS =                 \
        libslang                        \
        libunwind                       \
        libdw-dwarf-unwind              \
+       libbabeltrace                   \
        zlib
 
 VF_FEATURE_TESTS =                     \

tools/perf/config/Makefile else · line 679

Quoted 6 lines
tools/perf/config/Makefile +3 -0
@@ -661,6 +674,17 @@ else
   NO_PERF_READ_VDSOX32 := 1
 endif
 
+ifndef NO_LIBBABELTRACE
+  ifeq ($(feature-libbabeltrace), 0)
+    msg := $(warning No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-devel/libbabeltrace-dev);

It seems that Ubuntu has libbabeltrace-ctf-dev package.

Thanks,
Namhyung

Quoted 7 lines
tools/perf/config/Makefile +7 -0
+    NO_LIBBABELTRACE := 1
+  else
+    CFLAGS += -DHAVE_LIBBABELTRACE_SUPPORT $(LIBBABELTRACE_CFLAGS)
+    LDFLAGS += $(LIBBABELTRACE_LDFLAGS)
+    EXTLIBS += -lbabeltrace-ctf
+  endif
+endif
#3 lore raw

Re: [PATCH 1/8] perf tools: Add feature check for libbabeltrace

Quoted 8 lines · Namhyung Kim

Hi Jiri,

tools/perf/config/Makefile ifndef NO_LIBELF · line 89

Quoted 3 lines · Jiri Olsa
tools/perf/config/Makefile +3 -0
+ifndef NO_LIBBABELTRACE
+  # for linking with debug library, run like:
+  # make DEBUG=1 LIBBABELTRACE_DIR=/opt/libdw/

s/libdw/libbabeltrace/

ouch.. copy&paste crap ;-)

Quoted 33 lines
Quoted 33 lines
tools/perf/config/Makefile +10 -0
+  ifdef LIBBABELTRACE_DIR
+    LIBBABELTRACE_CFLAGS  := -I$(LIBBABELTRACE_DIR)/include
+    LIBBABELTRACE_LDFLAGS := -L$(LIBBABELTRACE_DIR)/lib
+  endif
+  FEATURE_CHECK_CFLAGS-libbabeltrace := $(LIBBABELTRACE_CFLAGS)
+  FEATURE_CHECK_LDFLAGS-libbabeltrace := $(LIBBABELTRACE_LDFLAGS) -lbabeltrace-ctf
+endif
+
 # include ARCH specific config
 -include $(src-perf)/arch/$(ARCH)/Makefile
@@ -201,6 +212,7 @@ CORE_FEATURE_TESTS =                        \
        stackprotector-all              \
        timerfd                         \
        libdw-dwarf-unwind              \
+       libbabeltrace                   \
        zlib
 
 LIB_FEATURE_TESTS =                    \
@@ -216,6 +228,7 @@ LIB_FEATURE_TESTS =                 \
        libslang                        \
        libunwind                       \
        libdw-dwarf-unwind              \
+       libbabeltrace                   \
        zlib
 
 VF_FEATURE_TESTS =                     \
@@ -661,6 +674,17 @@ else
   NO_PERF_READ_VDSOX32 := 1
 endif
 
Quoted 5 lines

tools/perf/config/Makefile else · line 679

Quoted 3 lines
tools/perf/config/Makefile +3 -0
+ifndef NO_LIBBABELTRACE
+  ifeq ($(feature-libbabeltrace), 0)
+    msg := $(warning No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-devel/libbabeltrace-dev);

It seems that Ubuntu has libbabeltrace-ctf-dev package.

ok

thanks,
jirka

author reviewer
#4 lore raw

PATCH 2/8 perf tools: Add new perf data command

In reply to Jiri Olsa

Adding new 'perf data' command to provide operations over data files.

The 'perf data convert' sub command is coming in following patch, but there's possibility for other useful commands like 'perf data ls' (to display perf data file in directory in ls style).

Cc Arnaldo Carvalho de Melo <[email protected]>
Cc David Ahern <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Jeremie Galarneau <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Sebastian Andrzej Siewior <[email protected]>
Cc Tom Zanussi <[email protected]>
---
 tools/perf/Documentation/perf-data.txt | 15 +++++++
 tools/perf/Makefile.perf               |  1 +
 tools/perf/builtin-data.c              | 75 ++++++++++++++++++++++++++++++++++
 tools/perf/builtin.h                   |  1 +
 tools/perf/command-list.txt            |  1 +
 tools/perf/perf.c                      |  1 +
 6 files changed, 94 insertions(+)
 create mode 100644 tools/perf/Documentation/perf-data.txt
 create mode 100644 tools/perf/builtin-data.c
tools/perf/Documentation/perf-data.txt new file +15 -0
new file mode 100644
index 000000000000..b8c83947715c
@@ -0,0 +1,15 @@
+perf-data(1)
+==============
+
+NAME
+----
+perf-data - Data file related processing
+
+SYNOPSIS
+--------
+[verse]
+'perf data' [<common options>] <command> [<options>]",
+
+DESCRIPTION
+-----------
+Data file related processing.
tools/perf/Makefile.perf +1 -0
index 3421c65130f1..33864dd316e5 100644
@@ -485,6 +485,7 @@ BUILTIN_OBJS += $(OUTPUT)builtin-kvm.o
 BUILTIN_OBJS += $(OUTPUT)builtin-inject.o
 BUILTIN_OBJS += $(OUTPUT)tests/builtin-test.o
 BUILTIN_OBJS += $(OUTPUT)builtin-mem.o
+BUILTIN_OBJS += $(OUTPUT)builtin-data.o
 
 PERFLIBS = $(LIB_FILE) $(LIBAPIKFS) $(LIBTRACEEVENT)
 
tools/perf/builtin-data.c new file +75 -0

75 lines not on this page · raw message

tools/perf/builtin.h +1 -0
index b210d62907e4..3688ad29085f 100644
@@ -37,6 +37,7 @@ extern int cmd_test(int argc, const char **argv, const char *prefix);
 extern int cmd_trace(int argc, const char **argv, const char *prefix);
 extern int cmd_inject(int argc, const char **argv, const char *prefix);
 extern int cmd_mem(int argc, const char **argv, const char *prefix);
+extern int cmd_data(int argc, const char **argv, const char *prefix);
 
 extern int find_scripts(char **scripts_array, char **scripts_path_array);
 #endif
tools/perf/command-list.txt +1 -0
index 0906fc401c52..00fcaf8a5b8d 100644
@@ -7,6 +7,7 @@ perf-archive			mainporcelain common
 perf-bench			mainporcelain common
 perf-buildid-cache		mainporcelain common
 perf-buildid-list		mainporcelain common
+perf-data			mainporcelain common
 perf-diff			mainporcelain common
 perf-evlist			mainporcelain common
 perf-inject			mainporcelain common
tools/perf/perf.c +1 -0
index 452a8474d29d..68e87dec8f41 100644
@@ -62,6 +62,7 @@ static struct cmd_struct commands[] = {
 #endif
 	{ "inject",	cmd_inject,	0 },
 	{ "mem",	cmd_mem,	0 },
+	{ "data",	cmd_data,	0 },
 };
 
 struct pager_config {
Signature · 1 line
1.9.3
author reviewer
#5 lore raw

PATCH 3/8 perf data: Add perf data to CTF conversion support

In reply to Jiri Olsa

Adding 'perf data convert' to convert perf data file into different format. This patch adds support for CTF format conversion.

To convert perf.data into CTF run:

  $ perf data convert --to-ctf=./ctf-data/
  [ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ]
  [ perf data convert: Converted and wrote 11.268 MB (100230 samples) ]

The command will create CTF metadata out of perf.data file (or one specified via -i option) and then convert all sample events into single CTF stream.

Each sample_type bit is translated into separated CTF event field apart from following exceptions:

  PERF_SAMPLE_RAW          - added in next patch
  PERF_SAMPLE_READ         - TODO
  PERF_SAMPLE_CALLCHAIN    - TODO

PERF_SAMPLE_BRANCH_STACK - TODO
PERF_SAMPLE_REGS_USER - TODO
PERF_SAMPLE_STACK_USER - TODO

  $ perf --debug=data-convert=2 data convert ...

The converted CTF data could be analyzed by CTF tools, like babletrace or tracecompass [1].

  $ babeltrace ./ctf-data/
  [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
  [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
  [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
  [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
  [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 }
  [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 }
  [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 }
  [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 }
  [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 }

The following members to the ctf-environment were decided to be added to distinguish and specify perf CTF data:
- domain
It says "kernel" because it contains a kernel trace (not to be confused with a user space like lttng-ust does)
- tracer_name
It says perf. This can be used to distinguish between lttng and perf CTF based trace.
- version
The kernel version from stream. In addition to release, this is what it looks like on a Debian kernel:
release = "3.14-1-amd64";
version = "3.14.0";

[1] http://projects.eclipse.org/projects/tools.tracecompass

Cc Arnaldo Carvalho de Melo <[email protected]>
Cc David Ahern <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Jeremie Galarneau <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Sebastian Andrzej Siewior <[email protected]>
Cc Tom Zanussi <[email protected]>
---
 tools/perf/Documentation/perf-data.txt |  25 ++
 tools/perf/Documentation/perf.txt      |   7 +-
 tools/perf/Makefile.perf               |   4 +
 tools/perf/builtin-data.c              |  44 +++
 tools/perf/util/data-convert-bt.c      | 612 +++++++++++++++++++++++++++++++++
 tools/perf/util/data-convert-bt.h      |   8 +
 tools/perf/util/debug.c                |   2 +
 tools/perf/util/debug.h                |   1 +
 8 files changed, 702 insertions(+), 1 deletion(-)
 create mode 100644 tools/perf/util/data-convert-bt.c
 create mode 100644 tools/perf/util/data-convert-bt.h
tools/perf/Documentation/perf-data.txt +25 -0
index b8c83947715c..be8fa1a0a97e 100644
@@ -13,3 +13,28 @@ SYNOPSIS
 DESCRIPTION
 -----------
 Data file related processing.
+
+COMMANDS
+--------
+convert::
+	Converts perf data file into another format (only CTF [1] format is support by now).
+	It's possible to set data-convert debug variable to get debug messages from conversion,
+	like:
+	  perf --debug data-convert data convert ...
+
+OPTIONS for 'convert'
+---------------------
+--to-ctf::
+	Triggers the CTF conversion, specify the path of CTF data directory.
+
+-i::
+	Specify input perf data file path.
+
+-v::
+--verbose::
+        Be more verbose (show counter open errors, etc).
+
+SEE ALSO
+--------
+linkperf:perf[1]
+[1] Common Trace Format - http://www.efficios.com/ctf
tools/perf/Documentation/perf.txt +6 -1
index d240bb2e5b22..eacdc2a63a9c 100644
@@ -13,11 +13,16 @@ SYNOPSIS
 OPTIONS
 -------
 --debug::
-	Setup debug variable (just verbose for now) in value
+	Setup debug variable (see list below) in value
 	range (0, 10). Use like:
 	  --debug verbose   # sets verbose = 1
 	  --debug verbose=2 # sets verbose = 2
 
+	List of debug variables allowed to set:
+	  verbose          - general debug messages
+	  ordered-events   - ordered events object debug messages
+	  data-convert     - data convert command debug messages
+
 DESCRIPTION
 -----------
 Performance counters for Linux are a new kernel-based subsystem
tools/perf/Makefile.perf +4 -0
index 33864dd316e5..2d3229ec0a23 100644
@@ -402,6 +402,10 @@ LIB_OBJS += $(OUTPUT)util/tsc.o
 LIB_OBJS += $(OUTPUT)util/cloexec.o
 LIB_OBJS += $(OUTPUT)util/thread-stack.o
 
+ifneq ($(NO_LIBBABELTRACE),1)
+LIB_OBJS += $(OUTPUT)util/data-convert-bt.o
+endif
+
 LIB_OBJS += $(OUTPUT)ui/setup.o
 LIB_OBJS += $(OUTPUT)ui/helpline.o
 LIB_OBJS += $(OUTPUT)ui/progress.o
tools/perf/builtin-data.c +44 -0

57 lines not on this page · raw message

tools/perf/util/data-convert-bt.c new file +612 -0

612 lines not on this page · raw message

tools/perf/util/data-convert-bt.h new file +8 -0
new file mode 100644
index 000000000000..dda30c5d0792
@@ -0,0 +1,8 @@
+#ifndef __DATA_CONVERT_BT_H
+#define __DATA_CONVERT_BT_H
+#ifdef HAVE_LIBBABELTRACE_SUPPORT
+
+int bt_convert__perf2ctf(const char *input_name, const char *to_ctf);
+
+#endif /* HAVE_LIBBABELTRACE_SUPPORT */
+#endif /* __DATA_CONVERT_BT_H */
tools/perf/util/debug.c +2 -0
index ad60b2f20258..2da5581ec74d 100644
@@ -20,6 +20,7 @@ int verbose;
 bool dump_trace = false, quiet = false;
 int debug_ordered_events;
 static int redirect_to_stderr;
+int debug_data_convert;
 
 static int _eprintf(int level, int var, const char *fmt, va_list args)
 {
@@ -147,6 +148,7 @@ static struct debug_variable {
 	{ .name = "verbose",		.ptr = &verbose },
 	{ .name = "ordered-events",	.ptr = &debug_ordered_events},
 	{ .name = "stderr",		.ptr = &redirect_to_stderr},
+	{ .name = "data-convert",	.ptr = &debug_data_convert },
 	{ .name = NULL, }
 };
 
tools/perf/util/debug.h +1 -0
index be264d6f3b30..caac2fdc6105 100644
@@ -12,6 +12,7 @@
 extern int verbose;
 extern bool quiet, dump_trace;
 extern int debug_ordered_events;
+extern int debug_data_convert;
 
 #ifndef pr_fmt
 #define pr_fmt(fmt) fmt
Signature · 1 line
1.9.3
maintainer
#6 lore raw

Re: [PATCH 3/8] perf data: Add perf data to CTF conversion support

tools/perf/Makefile.perf LIB_OBJS += $(OUTPUT)util/tsc.o · line 405

Quoted 9 lines · Jiri Olsa
tools/perf/Makefile.perf +1 -0
index 33864dd316e5..2d3229ec0a23 100644
@@ -402,6 +402,10 @@ LIB_OBJS += $(OUTPUT)util/tsc.o
 LIB_OBJS += $(OUTPUT)util/cloexec.o
 LIB_OBJS += $(OUTPUT)util/thread-stack.o
 
+ifneq ($(NO_LIBBABELTRACE),1)

I think we usually do it with just "ifndef".

Quoted 6 lines
tools/perf/Makefile.perf +3 -0
+LIB_OBJS += $(OUTPUT)util/data-convert-bt.o
+endif
+
 LIB_OBJS += $(OUTPUT)ui/setup.o
 LIB_OBJS += $(OUTPUT)ui/helpline.o
 LIB_OBJS += $(OUTPUT)ui/progress.o

[SNIP]

Quoted 22 lines
tools/perf/Makefile.perf +22 -0
+static int add_generic_values(struct ctf_writer *cw,
+                             struct bt_ctf_event *event,
+                             struct perf_evsel *evsel,
+                             struct perf_sample *sample)
+{
+       u64 type = evsel->attr.sample_type;
+       int ret;
+
+       /*
+        * missing:
+        *   PERF_SAMPLE_TIME         - not needed as we have it in
+        *                              ctf event header
+        *   PERF_SAMPLE_READ         - TODO
+        *   PERF_SAMPLE_CALLCHAIN    - TODO
+        *   PERF_SAMPLE_RAW          - tracepoint fields are handled separately
+        *   PERF_SAMPLE_BRANCH_STACK - TODO
+        *   PERF_SAMPLE_REGS_USER    - TODO
+        *   PERF_SAMPLE_STACK_USER   - TODO
+        */
+
+       if (type & PERF_SAMPLE_IP) {
+               ret = value_set_u64_hex(cw, event, "ip", sample->ip);

tools/perf/Makefile.perf

Quoted 10 lines
tools/perf/Makefile.perf +10 -0
+               if (ret)
+                       return -1;
+       }
+
+       if (type & PERF_SAMPLE_TID) {
+               ret = value_set_s32(cw, event, "tid", sample->tid);
+               if (ret)
+                       return -1;
+
+               ret = value_set_s32(cw, event, "pid", sample->tid);

sample->pid ?

tools/perf/Makefile.perf

Quoted 13 lines
tools/perf/Makefile.perf +13 -0
+               if (ret)
+                       return -1;
+       }
+
+       if ((type & PERF_SAMPLE_ID) ||
+           (type & PERF_SAMPLE_IDENTIFIER)) {
+               ret = value_set_u64(cw, event, "id", sample->id);
+               if (ret)
+                       return -1;
+       }
+
+       if (type & PERF_SAMPLE_STREAM_ID) {
+               ret = value_set_u64(cw, event, "stream_id", sample->id);

sample->stream_id ?

Thanks,
Namhyung

Quoted 3 lines
tools/perf/Makefile.perf +3 -0
+               if (ret)
+                       return -1;
+       }
#7 lore raw

Re: [PATCH 3/8] perf data: Add perf data to CTF conversion support

Quoted 9 lines · Namhyung Kim
Quoted 8 lines · Jiri Olsa
tools/perf/Makefile.perf +0 -0
index 33864dd316e5..2d3229ec0a23 100644
@@ -402,6 +402,10 @@ LIB_OBJS += $(OUTPUT)util/tsc.o
 LIB_OBJS += $(OUTPUT)util/cloexec.o
 LIB_OBJS += $(OUTPUT)util/thread-stack.o
 
Quoted 3 lines

tools/perf/Makefile.perf LIB_OBJS += $(OUTPUT)util/tsc.o · line 405

Quoted 1 line
tools/perf/Makefile.perf +1 -0
+ifneq ($(NO_LIBBABELTRACE),1)

I think we usually do it with just "ifndef".

ok

SNIP

Quoted 10 lines

tools/perf/Makefile.perf LIB_OBJS += $(OUTPUT)util/tsc.o

Quoted 8 lines
tools/perf/Makefile.perf +8 -0
+       }
+
+       if (type & PERF_SAMPLE_TID) {
+               ret = value_set_s32(cw, event, "tid", sample->tid);
+               if (ret)
+                       return -1;
+
+               ret = value_set_s32(cw, event, "pid", sample->tid);

sample->pid ?

yes

Quoted 17 lines
Quoted 5 lines
tools/perf/Makefile.perf +3 -0
+               if (ret)
+                       return -1;
+       }

tools/perf/Makefile.perf

Quoted 10 lines
tools/perf/Makefile.perf +10 -0
+
+       if ((type & PERF_SAMPLE_ID) ||
+           (type & PERF_SAMPLE_IDENTIFIER)) {
+               ret = value_set_u64(cw, event, "id", sample->id);
+               if (ret)
+                       return -1;
+       }
+
+       if (type & PERF_SAMPLE_STREAM_ID) {
+               ret = value_set_u64(cw, event, "stream_id", sample->id);

sample->stream_id ?

yes

thanks,
jirka

author reviewer
#8 lore raw

PATCH 4/8 perf data: Add a 'perf' prefix to the generic fields

In reply to Jiri Olsa

From: Sebastian Andrzej Siewior <[email protected]>

Some of the tracers bring their own id or pid fields and we can end up having two of them. This patch adds a "perf_" prefix to the 'generic' fields so we avoid a clash of the member names.

The change is visible in the babeltrace output:

Before:

  $ babeltrace ./ctf-data/
  [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
  [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
  ...

Now:

  $ babeltrace ./ctf-data/
  [03:19:13.962131936] (+0.000001935) cycles: { }, { perf_ip = 0xFFFFFFFF8105443A, perf_tid = 20714, perf_pid = 20714, perf_period = 8 }
  [03:19:13.962133732] (+0.000001796) cycles: { }, { perf_ip = 0xFFFFFFFF8105443A, perf_tid = 20714, perf_pid = 20714, perf_period = 114 }
  ...
Cc Arnaldo Carvalho de Melo <[email protected]>
Cc David Ahern <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Jeremie Galarneau <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Sebastian Andrzej Siewior <[email protected]>
Cc Tom Zanussi <[email protected]>
---
 tools/perf/util/data-convert-bt.c | 42 ++++++++++++++++++++-------------------
 1 file changed, 22 insertions(+), 20 deletions(-)
tools/perf/util/data-convert-bt.c +22 -20
index 33a0774f03e4..3c39fae9c07e 100644
@@ -147,60 +147,62 @@ static int add_generic_values(struct ctf_writer *cw,
 	 */
 
 	if (type & PERF_SAMPLE_IP) {
-		ret = value_set_u64_hex(cw, event, "ip", sample->ip);
+		ret = value_set_u64_hex(cw, event, "perf_ip", sample->ip);
 		if (ret)
 			return -1;
 	}
 
 	if (type & PERF_SAMPLE_TID) {
-		ret = value_set_s32(cw, event, "tid", sample->tid);
+		ret = value_set_s32(cw, event, "perf_tid", sample->tid);
 		if (ret)
 			return -1;
 
-		ret = value_set_s32(cw, event, "pid", sample->tid);
+		ret = value_set_s32(cw, event, "perf_pid", sample->tid);
 		if (ret)
 			return -1;
 	}
 
 	if ((type & PERF_SAMPLE_ID) ||
 	    (type & PERF_SAMPLE_IDENTIFIER)) {
-		ret = value_set_u64(cw, event, "id", sample->id);
+		ret = value_set_u64(cw, event, "perf_id", sample->id);
 		if (ret)
 			return -1;
 	}
 
 	if (type & PERF_SAMPLE_STREAM_ID) {
-		ret = value_set_u64(cw, event, "stream_id", sample->id);
+		ret = value_set_u64(cw, event, "perf_stream_id", sample->id);
 		if (ret)
 			return -1;
 	}
 
 	if (type & PERF_SAMPLE_CPU) {
-		ret = value_set_u32(cw, event, "cpu", sample->cpu);
+		ret = value_set_u32(cw, event, "perf_cpu", sample->cpu);
 		if (ret)
 			return -1;
 	}
 
 	if (type & PERF_SAMPLE_PERIOD) {
-		ret = value_set_u64(cw, event, "period", sample->period);
+		ret = value_set_u64(cw, event, "perf_period", sample->period);
 		if (ret)
 			return -1;
 	}
 
 	if (type & PERF_SAMPLE_WEIGHT) {
-		ret = value_set_u64(cw, event, "weight", sample->weight);
+		ret = value_set_u64(cw, event, "perf_weight", sample->weight);
 		if (ret)
 			return -1;
 	}
 
 	if (type & PERF_SAMPLE_DATA_SRC) {
-		ret = value_set_u64(cw, event, "data_src", sample->data_src);
+		ret = value_set_u64(cw, event, "perf_data_src",
+				sample->data_src);
 		if (ret)
 			return -1;
 	}
 
 	if (type & PERF_SAMPLE_TRANSACTION) {
-		ret = value_set_u64(cw, event, "transaction", sample->transaction);
+		ret = value_set_u64(cw, event, "perf_transaction",
+				sample->transaction);
 		if (ret)
 			return -1;
 	}
@@ -276,34 +278,34 @@ static int add_generic_types(struct ctf_writer *cw, struct perf_evsel *evsel,
 	} while (0)
 
 	if (type & PERF_SAMPLE_IP)
-		ADD_FIELD(event_class, cw->data.u64_hex, "ip");
+		ADD_FIELD(event_class, cw->data.u64_hex, "perf_ip");
 
 	if (type & PERF_SAMPLE_TID) {
-		ADD_FIELD(event_class, cw->data.s32, "tid");
-		ADD_FIELD(event_class, cw->data.s32, "pid");
+		ADD_FIELD(event_class, cw->data.s32, "perf_tid");
+		ADD_FIELD(event_class, cw->data.s32, "perf_pid");
 	}
 
 	if ((type & PERF_SAMPLE_ID) ||
 	    (type & PERF_SAMPLE_IDENTIFIER))
-		ADD_FIELD(event_class, cw->data.u64, "id");
+		ADD_FIELD(event_class, cw->data.u64, "perf_id");
 
 	if (type & PERF_SAMPLE_STREAM_ID)
-		ADD_FIELD(event_class, cw->data.u64, "stream_id");
+		ADD_FIELD(event_class, cw->data.u64, "perf_stream_id");
 
 	if (type & PERF_SAMPLE_CPU)
-		ADD_FIELD(event_class, cw->data.u32, "cpu");
+		ADD_FIELD(event_class, cw->data.u32, "perf_cpu");
 
 	if (type & PERF_SAMPLE_PERIOD)
-		ADD_FIELD(event_class, cw->data.u64, "period");
+		ADD_FIELD(event_class, cw->data.u64, "perf_period");
 
 	if (type & PERF_SAMPLE_WEIGHT)
-		ADD_FIELD(event_class, cw->data.u64, "weight");
+		ADD_FIELD(event_class, cw->data.u64, "perf_weight");
 
 	if (type & PERF_SAMPLE_DATA_SRC)
-		ADD_FIELD(event_class, cw->data.u64, "data_src");
+		ADD_FIELD(event_class, cw->data.u64, "perf_data_src");
 
 	if (type & PERF_SAMPLE_TRANSACTION)
-		ADD_FIELD(event_class, cw->data.u64, "transaction");
+		ADD_FIELD(event_class, cw->data.u64, "perf_transaction");
 
 #undef ADD_FIELD
 	return 0;
Signature · 1 line
1.9.3
author reviewer
#9 lore raw

PATCH 5/8 perf data: Add tracepoint events fields CTF conversion support

In reply to Jiri Olsa

From: Sebastian Andrzej Siewior <[email protected]>

Adding support to convert tracepoint event fields into CTF event fields.

We parse each tracepoint event for CTF conversion and add tracepoint fields as regular CTF event fields, so they appear in babeltrace output like:

  $ babeltrace ./ctf-data/
  ...
  [09:02:00.950703057] (+?.?????????) sched:sched_stat_runtime: { }, { perf_ip = ... SNIP ... common_type = 298, common_flags = 1, \
  common_preempt_count = 0, common_pid = 31813, comm = "perf", pid = 31813, runtime = 458800, vruntime = 52059858071 }
  ...
Cc Arnaldo Carvalho de Melo <[email protected]>
Cc David Ahern <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Jeremie Galarneau <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Sebastian Andrzej Siewior <[email protected]>
Cc Tom Zanussi <[email protected]>
---
 tools/perf/util/data-convert-bt.c | 242 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 242 insertions(+)
tools/perf/util/data-convert-bt.c +242 -0
index 3c39fae9c07e..cf1b16c89120 100644
@@ -126,6 +126,177 @@ FUNC_VALUE_SET(s64)
 FUNC_VALUE_SET(u64)
 __FUNC_VALUE_SET(u64_hex, u64)
 
+static struct bt_ctf_field_type*
+get_tracepoint_field_type(struct ctf_writer *cw, struct format_field *field)
+{
+	unsigned long flags = field->flags;
+
+	if (flags & FIELD_IS_STRING)
+		return cw->data.string;
+
+	if (!(flags & FIELD_IS_SIGNED)) {
+		/* unsigned long are mostly pointers */
+		if (flags & FIELD_IS_LONG || flags & FIELD_IS_POINTER)
+			return cw->data.u64_hex;
+	}
+
+	if (flags & FIELD_IS_SIGNED) {
+		if (field->size == 8)
+			return cw->data.s64;
+		else
+			return cw->data.s32;
+	}
+
+	if (field->size == 8)
+		return cw->data.u64;
+	else
+		return cw->data.u32;
+}
+
+static int add_tracepoint_field_value(struct ctf_writer *cw,
+				      struct bt_ctf_event_class *event_class,
+				      struct bt_ctf_event *event,
+				      struct perf_sample *sample,
+				      struct format_field *fmtf)
+{
+	struct bt_ctf_field_type *type;
+	struct bt_ctf_field *array_field;
+	struct bt_ctf_field *field;
+	const char *name = fmtf->name;
+	void *data = sample->raw_data;
+	unsigned long long value_int;
+	unsigned long flags = fmtf->flags;
+	unsigned int n_items;
+	unsigned int i;
+	unsigned int offset;
+	unsigned int len;
+	int ret;
+
+	offset = fmtf->offset;
+	len = fmtf->size;
+	if (flags & FIELD_IS_STRING)
+		flags &= ~FIELD_IS_ARRAY;
+
+	if (flags & FIELD_IS_DYNAMIC) {
+		unsigned long long tmp_val;
+
+		tmp_val = pevent_read_number(fmtf->event->pevent,
+				data + offset, len);
+		offset = tmp_val;
+		len = offset >> 16;
+		offset &= 0xffff;
+	}
+
+	if (flags & FIELD_IS_ARRAY) {
+
+		type = bt_ctf_event_class_get_field_by_name(
+				event_class, name);
+		array_field = bt_ctf_field_create(type);
+		bt_ctf_field_type_put(type);
+		if (!array_field) {
+			pr_err("Failed to create array type %s\n", name);
+			return -1;
+		}
+
+		len = fmtf->size / fmtf->arraylen;
+		n_items = fmtf->arraylen;
+	} else {
+		n_items = 1;
+		array_field = NULL;
+	}
+
+	type = get_tracepoint_field_type(cw, fmtf);
+
+	for (i = 0; i < n_items; i++) {
+		if (!(flags & FIELD_IS_STRING))
+			value_int = pevent_read_number(
+					fmtf->event->pevent,
+					data + offset + i * len, len);
+
+		if (flags & FIELD_IS_ARRAY)
+			field = bt_ctf_field_array_get_field(array_field, i);
+		else
+			field = bt_ctf_field_create(type);
+
+		if (!field) {
+			pr_err("failed to create a field %s\n", name);
+			return -1;
+		}
+
+		if (flags & FIELD_IS_STRING)
+			ret = bt_ctf_field_string_set_value(field,
+					data + offset + i * len);
+		else if (!(flags & FIELD_IS_SIGNED))
+			ret = bt_ctf_field_unsigned_integer_set_value(
+					field, value_int);
+		else
+			ret = bt_ctf_field_signed_integer_set_value(
+					field, value_int);
+		if (ret) {
+			pr_err("failed to set file value %s\n", name);
+			goto err_put_field;
+		}
+		if (!(flags & FIELD_IS_ARRAY)) {
+			ret = bt_ctf_event_set_payload(event, name, field);
+			if (ret) {
+				pr_err("failed to set payload %s\n", name);
+				goto err_put_field;
+			}
+		}
+		bt_ctf_field_put(field);
+	}
+	if (flags & FIELD_IS_ARRAY) {
+		ret = bt_ctf_event_set_payload(event, name, array_field);
+		if (ret) {
+			pr_err("Failed add payload array %s\n", name);
+			return -1;
+		}
+		bt_ctf_field_put(array_field);
+	}
+	return 0;
+
+err_put_field:
+	bt_ctf_field_put(field);
+	return -1;
+}
+
+static int add_tracepoint_fields_values(struct ctf_writer *cw,
+					struct bt_ctf_event_class *event_class,
+					struct bt_ctf_event *event,
+					struct format_field *fields,
+					struct perf_sample *sample)
+{
+	struct format_field *field;
+	int ret;
+
+	for (field = fields; field; field = field->next) {
+		ret = add_tracepoint_field_value(cw, event_class, event, sample,
+				field);
+		if (ret)
+			return -1;
+	}
+	return 0;
+}
+
+static int add_tracepoint_values(struct ctf_writer *cw,
+				 struct bt_ctf_event_class *event_class,
+				 struct bt_ctf_event *event,
+				 struct perf_evsel *evsel,
+				 struct perf_sample *sample)
+{
+	struct format_field *common_fields = evsel->tp_format->format.common_fields;
+	struct format_field *fields        = evsel->tp_format->format.fields;
+	int ret;
+
+	ret = add_tracepoint_fields_values(cw, event_class, event,
+					   common_fields, sample);
+	if (!ret)
+		ret = add_tracepoint_fields_values(cw, event_class, event,
+						   fields, sample);
+
+	return ret;
+}
+
 static int add_generic_values(struct ctf_writer *cw,
 			      struct bt_ctf_event *event,
 			      struct perf_evsel *evsel,
@@ -246,11 +417,76 @@ static int process_sample_event(struct perf_tool *tool,
 	if (ret)
 		return -1;
 
+	if (evsel->attr.type == PERF_TYPE_TRACEPOINT) {
+		ret = add_tracepoint_values(cw, event_class, event,
+					    evsel, sample);
+		if (ret)
+			return -1;
+	}
+
 	bt_ctf_stream_append_event(cw->stream, event);
 	bt_ctf_event_put(event);
 	return 0;
 }
 
+static int add_tracepoint_fields_types(struct ctf_writer *cw,
+				       struct format_field *fields,
+				       struct bt_ctf_event_class *event_class)
+{
+	struct format_field *field;
+	int ret;
+
+	for (field = fields; field; field = field->next) {
+		struct bt_ctf_field_type *type;
+		unsigned long flags = field->flags;
+
+		pr2("  field '%s'\n", field->name);
+
+		type = get_tracepoint_field_type(cw, field);
+		if (!type)
+			return -1;
+
+		/*
+		 * A string is an array of chars. For this we use the string
+		 * type and don't care that it is an array. What we don't
+		 * support is an array of strings.
+		 */
+		if (flags & FIELD_IS_STRING)
+			flags &= ~FIELD_IS_ARRAY;
+
+		if (flags & FIELD_IS_ARRAY)
+			type = bt_ctf_field_type_array_create(type, field->arraylen);
+
+		ret = bt_ctf_event_class_add_field(event_class, type,
+				field->name);
+
+		if (flags & FIELD_IS_ARRAY)
+			bt_ctf_field_type_put(type);
+
+		if (ret) {
+			pr_err("Failed to add field '%s\n", field->name);
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+static int add_tracepoint_types(struct ctf_writer *cw,
+				struct perf_evsel *evsel,
+				struct bt_ctf_event_class *class)
+{
+	struct format_field *common_fields = evsel->tp_format->format.common_fields;
+	struct format_field *fields        = evsel->tp_format->format.fields;
+	int ret;
+
+	ret = add_tracepoint_fields_types(cw, common_fields, class);
+	if (!ret)
+		ret = add_tracepoint_fields_types(cw, fields, class);
+
+	return ret;
+}
+
 static int add_generic_types(struct ctf_writer *cw, struct perf_evsel *evsel,
 			     struct bt_ctf_event_class *event_class)
 {
@@ -328,6 +564,12 @@ static int add_event(struct ctf_writer *cw, struct perf_evsel *evsel)
 	if (ret)
 		goto err;
 
+	if (evsel->attr.type == PERF_TYPE_TRACEPOINT) {
+		ret = add_tracepoint_types(cw, evsel, event_class);
+		if (ret)
+			goto err;
+	}
+
 	ret = bt_ctf_stream_class_add_event_class(cw->stream_class, event_class);
 	if (ret) {
 		pr("Failed to add event class into stream.\n");
Signature · 1 line
1.9.3
author reviewer
#10 lore raw

PATCH 6/8 perf data: Switch to multiple cpu stream files

In reply to Jiri Olsa

From: Sebastian Andrzej Siewior <[email protected]>

Currently we store the data into single data strea/file. The cpu if data is stored within the event sample. The lttng puts the CPU number that belongs to the event into the packet context instead into the event.

This patch makes sure that the trace produce by perf does look the same way. We now use one stream per-CPU. Having it all in one stream increased the total size of the resulting file. The test went from 416KiB (with perf_cpu event member) to 24MiB due to the required (and pointless) flush. With the per-cpu streams the total size went up to 588KiB.

Cc Arnaldo Carvalho de Melo <[email protected]>
Cc David Ahern <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Jeremie Galarneau <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Sebastian Andrzej Siewior <[email protected]>
Cc Tom Zanussi <[email protected]>
---
 tools/perf/util/data-convert-bt.c | 208 +++++++++++++++++++++++++++++++++-----
 1 file changed, 184 insertions(+), 24 deletions(-)
tools/perf/util/data-convert-bt.c +184 -24
index cf1b16c89120..2bc70b8d128d 100644
@@ -38,12 +38,20 @@ struct evsel_priv {
 	struct bt_ctf_event_class *event_class;
 };
 
+#define MAX_CPUS	4096
+
+struct ctf_stream {
+	struct bt_ctf_stream *stream;
+	int cpu;
+};
+
 struct ctf_writer {
 	/* writer primitives */
-	struct bt_ctf_writer		*writer;
-	struct bt_ctf_stream		*stream;
-	struct bt_ctf_stream_class	*stream_class;
-	struct bt_ctf_clock		*clock;
+	struct bt_ctf_writer		 *writer;
+	struct ctf_stream		**stream;
+	int				  stream_cnt;
+	struct bt_ctf_stream_class	 *stream_class;
+	struct bt_ctf_clock		 *clock;
 
 	/* data types */
 	union {
@@ -346,12 +354,6 @@ static int add_generic_values(struct ctf_writer *cw,
 			return -1;
 	}
 
-	if (type & PERF_SAMPLE_CPU) {
-		ret = value_set_u32(cw, event, "perf_cpu", sample->cpu);
-		if (ret)
-			return -1;
-	}
-
 	if (type & PERF_SAMPLE_PERIOD) {
 		ret = value_set_u64(cw, event, "perf_period", sample->period);
 		if (ret)
@@ -381,6 +383,113 @@ static int add_generic_values(struct ctf_writer *cw,
 	return 0;
 }
 
+static int ctf_stream__flush(struct ctf_stream *cs)
+{
+	int err = 0;
+
+	if (cs) {
+		err = bt_ctf_stream_flush(cs->stream);
+		if (err)
+			pr_err("CTF stream %d flush failed\n", cs->cpu);
+
+		pr("Flush stream for cpu %d\n", cs->cpu);
+	}
+
+	return err;
+}
+
+static struct ctf_stream *ctf_stream__create(struct ctf_writer *cw, int cpu)
+{
+	struct ctf_stream *cs;
+	struct bt_ctf_field *pkt_ctx   = NULL;
+	struct bt_ctf_field *cpu_field = NULL;
+	struct bt_ctf_stream *stream   = NULL;
+	int ret;
+
+	cs = zalloc(sizeof(*cs));
+	if (!cs) {
+		pr_err("Failed to allocate ctf stream\n");
+		return NULL;
+	}
+
+	stream = bt_ctf_writer_create_stream(cw->writer, cw->stream_class);
+	if (!stream) {
+		pr_err("Failed to create CTF stream\n");
+		goto out;
+	}
+
+	pkt_ctx = bt_ctf_stream_get_packet_context(stream);
+	if (!pkt_ctx) {
+		pr_err("Failed to obtain packet context\n");
+		goto out;
+	}
+
+	cpu_field = bt_ctf_field_structure_get_field(pkt_ctx, "cpu_id");
+	bt_ctf_field_put(pkt_ctx);
+	if (!cpu_field) {
+		pr_err("Failed to obtain cpu field\n");
+		goto out;
+	}
+
+	ret = bt_ctf_field_unsigned_integer_set_value(cpu_field, (u32) cpu);
+	if (ret) {
+		pr_err("Failed to update CPU number\n");
+		goto out;
+	}
+
+	bt_ctf_field_put(cpu_field);
+
+	cs->cpu    = cpu;
+	cs->stream = stream;
+	return cs;
+
+out:
+	if (cpu_field)
+		bt_ctf_field_put(cpu_field);
+	if (stream)
+		bt_ctf_stream_put(stream);
+
+	free(cs);
+	return NULL;
+}
+
+static void ctf_stream__delete(struct ctf_stream *cs)
+{
+	if (cs) {
+		bt_ctf_stream_put(cs->stream);
+		free(cs);
+	}
+}
+
+static struct ctf_stream *ctf_stream(struct ctf_writer *cw, int cpu)
+{
+	struct ctf_stream *cs = cw->stream[cpu];
+
+	if (!cs) {
+		cs = ctf_stream__create(cw, cpu);
+		cw->stream[cpu] = cs;
+	}
+
+	return cs;
+}
+
+static int get_sample_cpu(struct ctf_writer *cw, struct perf_sample *sample,
+			  struct perf_evsel *evsel)
+{
+	int cpu = 0;
+
+	if (evsel->attr.sample_type & PERF_SAMPLE_CPU)
+		cpu = sample->cpu;
+
+	if (cpu > cw->stream_cnt) {
+		pr_err("Event was recorded for CPU %d, limit is at %d.\n",
+			cpu, cw->stream_cnt);
+		cpu = 0;
+	}
+
+	return cpu;
+}
+
 static int process_sample_event(struct perf_tool *tool,
 				union perf_event *_event __maybe_unused,
 				struct perf_sample *sample,
@@ -390,6 +499,7 @@ static int process_sample_event(struct perf_tool *tool,
 	struct convert *c = container_of(tool, struct convert, tool);
 	struct evsel_priv *priv = evsel->priv;
 	struct ctf_writer *cw = &c->writer;
+	struct ctf_stream *cs;
 	struct bt_ctf_event_class *event_class;
 	struct bt_ctf_event *event;
 	int ret;
@@ -424,9 +534,12 @@ static int process_sample_event(struct perf_tool *tool,
 			return -1;
 	}
 
-	bt_ctf_stream_append_event(cw->stream, event);
+	cs = ctf_stream(cw, get_sample_cpu(cw, sample, evsel));
+	if (cs)
+		bt_ctf_stream_append_event(cs->stream, event);
+
 	bt_ctf_event_put(event);
-	return 0;
+	return cs ? 0 : -1;
 }
 
 static int add_tracepoint_fields_types(struct ctf_writer *cw,
@@ -528,9 +641,6 @@ static int add_generic_types(struct ctf_writer *cw, struct perf_evsel *evsel,
 	if (type & PERF_SAMPLE_STREAM_ID)
 		ADD_FIELD(event_class, cw->data.u64, "perf_stream_id");
 
-	if (type & PERF_SAMPLE_CPU)
-		ADD_FIELD(event_class, cw->data.u32, "perf_cpu");
-
 	if (type & PERF_SAMPLE_PERIOD)
 		ADD_FIELD(event_class, cw->data.u64, "perf_period");
 
@@ -604,6 +714,42 @@ static int setup_events(struct ctf_writer *cw, struct perf_session *session)
 	return 0;
 }
 
+static int setup_streams(struct ctf_writer *cw, struct perf_session *session)
+{
+	struct ctf_stream **stream;
+	struct perf_header *ph = &session->header;
+	int ncpus;
+
+	/*
+	 * Try to get the number of cpus used in the data file,
+	 * if not present fallback to the MAX_CPUS.
+	 */
+	if (!ph)
+		ncpus = MAX_CPUS;
+	else
+		ncpus = ph->env.nr_cpus_avail;
+
+	stream = zalloc(sizeof(*stream) * ncpus);
+	if (!stream) {
+		pr_err("Failed to allocate streams.\n");
+		return -ENOMEM;
+	}
+
+	cw->stream     = stream;
+	cw->stream_cnt = ncpus;
+	return 0;
+}
+
+static void free_streams(struct ctf_writer *cw)
+{
+	int cpu;
+
+	for (cpu = 0; cpu < cw->stream_cnt; cpu++)
+		ctf_stream__delete(cw->stream[cpu]);
+
+	free(cw->stream);
+}
+
 static int ctf_writer__setup_env(struct ctf_writer *cw,
 				 struct perf_session *session)
 {
@@ -713,7 +859,7 @@ static void ctf_writer__cleanup(struct ctf_writer *cw)
 	ctf_writer__cleanup_data(cw);
 
 	bt_ctf_clock_put(cw->clock);
-	bt_ctf_stream_put(cw->stream);
+	free_streams(cw);
 	bt_ctf_stream_class_put(cw->stream_class);
 	bt_ctf_writer_put(cw->writer);
 
@@ -725,8 +871,9 @@ static int ctf_writer__init(struct ctf_writer *cw, const char *path)
 {
 	struct bt_ctf_writer		*writer;
 	struct bt_ctf_stream_class	*stream_class;
-	struct bt_ctf_stream		*stream;
 	struct bt_ctf_clock		*clock;
+	struct bt_ctf_field_type	*pkt_ctx_type;
+	int				ret;
 
 	/* CTF writer */
 	writer = bt_ctf_writer_create(path);
@@ -767,14 +914,15 @@ static int ctf_writer__init(struct ctf_writer *cw, const char *path)
 	if (ctf_writer__init_data(cw))
 		goto err_cleanup;
 
-	/* CTF stream instance */
-	stream = bt_ctf_writer_create_stream(writer, stream_class);
-	if (!stream) {
-		pr("Failed to create CTF stream.\n");
+	/* Add cpu_id for packet context */
+	pkt_ctx_type = bt_ctf_stream_class_get_packet_context_type(stream_class);
+	if (!pkt_ctx_type)
 		goto err_cleanup;
-	}
 
-	cw->stream = stream;
+	ret = bt_ctf_field_type_structure_add_field(pkt_ctx_type, cw->data.u32, "cpu_id");
+	bt_ctf_field_type_put(pkt_ctx_type);
+	if (ret)
+		goto err_cleanup;
 
 	/* CTF clock writer setup */
 	if (bt_ctf_writer_add_clock(writer, clock)) {
@@ -791,6 +939,14 @@ err:
 	return -1;
 }
 
+static void ctf_writer__flush_streams(struct ctf_writer *cw)
+{
+	int cpu;
+
+	for (cpu = 0; cpu < cw->stream_cnt; cpu++)
+		ctf_stream__flush(cw->stream[cpu]);
+}
+
 int bt_convert__perf2ctf(const char *input, const char *path)
 {
 	struct perf_session *session;
@@ -833,9 +989,13 @@ int bt_convert__perf2ctf(const char *input, const char *path)
 	if (setup_events(cw, session))
 		goto free_session;
 
+	if (setup_streams(cw, session))
+		goto free_session;
+
 	err = perf_session__process_events(session, &c.tool);
 	if (!err)
-		err = bt_ctf_stream_flush(cw->stream);
+		ctf_writer__flush_streams(cw);
+
 
 	fprintf(stderr,
 		"[ perf data convert: Converted '%s' into CTF data '%s' ]\n",
Signature · 1 line
1.9.3
maintainer
#11 lore raw

Re: [PATCH 6/8] perf data: Switch to multiple cpu stream files

tools/perf/util/data-convert-bt.c static int setup_events(struct ctf_writer *cw, struct perf_session *session) · line 727

Quoted 11 lines · Jiri Olsa
tools/perf/util/data-convert-bt.c +11 -0
+static int setup_streams(struct ctf_writer *cw, struct perf_session *session)
+{
+       struct ctf_stream **stream;
+       struct perf_header *ph = &session->header;
+       int ncpus;
+
+       /*
+        * Try to get the number of cpus used in the data file,
+        * if not present fallback to the MAX_CPUS.
+        */
+       if (!ph)

I think this check is meaningless since perf_header struct is embedded in perf_session so it shouldn't be NULL when refered from a session..

Thanks,
Namhyung

Quoted 14 lines
tools/perf/util/data-convert-bt.c +14 -0
+               ncpus = MAX_CPUS;
+       else
+               ncpus = ph->env.nr_cpus_avail;
+
+       stream = zalloc(sizeof(*stream) * ncpus);
+       if (!stream) {
+               pr_err("Failed to allocate streams.\n");
+               return -ENOMEM;
+       }
+
+       cw->stream     = stream;
+       cw->stream_cnt = ncpus;
+       return 0;
+}
#12 lore raw

Re: [PATCH 6/8] perf data: Switch to multiple cpu stream files

Quoted 15 lines · Namhyung Kim

tools/perf/util/data-convert-bt.c static int setup_events(struct ctf_writer *cw, struct perf_session *session) · line 727

Quoted 11 lines · Jiri Olsa
tools/perf/util/data-convert-bt.c +11 -0
+static int setup_streams(struct ctf_writer *cw, struct perf_session *session)
+{
+       struct ctf_stream **stream;
+       struct perf_header *ph = &session->header;
+       int ncpus;
+
+       /*
+        * Try to get the number of cpus used in the data file,
+        * if not present fallback to the MAX_CPUS.
+        */
+       if (!ph)

I think this check is meaningless since perf_header struct is embedded in perf_session so it shouldn't be NULL when refered from a session..

right, it's actually different in the git, I used:

        if (!ph || !ph->env.nr_cpus_avail)
                ncpus = MAX_CPUS;

I attached slightyl older version in email :-\

anyway, I'll send v2 shortly

thanks,
jirka

author reviewer
#13 lore raw

PATCH 7/8 perf data: Enable stream flush within processing

In reply to Jiri Olsa

For big data files the size of data allocated for stream instance could get really high. It's needed to flush the data out of the stream once in a while.

Unfortunately there's no size indication in the stream object, so we govern the flush based on the number of stored events. Current flush limit is set ot 100000 events.

Cc Arnaldo Carvalho de Melo <[email protected]>
Cc David Ahern <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Jeremie Galarneau <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Sebastian Andrzej Siewior <[email protected]>
Cc Tom Zanussi <[email protected]>
---
 tools/perf/util/data-convert-bt.c | 28 +++++++++++++++++++++++++---
 1 file changed, 25 insertions(+), 3 deletions(-)
tools/perf/util/data-convert-bt.c +25 -3
index 2bc70b8d128d..df95fac399d7 100644
@@ -43,6 +43,7 @@ struct evsel_priv {
 struct ctf_stream {
 	struct bt_ctf_stream *stream;
 	int cpu;
+	u32 count;
 };
 
 struct ctf_writer {
@@ -392,7 +393,10 @@ static int ctf_stream__flush(struct ctf_stream *cs)
 		if (err)
 			pr_err("CTF stream %d flush failed\n", cs->cpu);
 
-		pr("Flush stream for cpu %d\n", cs->cpu);
+		pr("Flush stream for cpu %d (%u samples)\n",
+		   cs->cpu, cs->count);
+
+		cs->count = 0;
 	}
 
 	return err;
@@ -490,6 +494,19 @@ static int get_sample_cpu(struct ctf_writer *cw, struct perf_sample *sample,
 	return cpu;
 }
 
+#define STREAM_FLUSH_COUNT 100000
+
+/*
+ * Currently we have no other way to determine the
+ * time for the stream flush other than keep track
+ * of the number of events and check it against
+ * threshold.
+ */
+static bool is_flush_needed(struct ctf_stream *cs)
+{
+	return cs->count >= STREAM_FLUSH_COUNT;
+}
+
 static int process_sample_event(struct perf_tool *tool,
 				union perf_event *_event __maybe_unused,
 				struct perf_sample *sample,
@@ -535,8 +552,13 @@ static int process_sample_event(struct perf_tool *tool,
 	}
 
 	cs = ctf_stream(cw, get_sample_cpu(cw, sample, evsel));
-	if (cs)
+	if (cs) {
+		if (is_flush_needed(cs))
+			ctf_stream__flush(cs);
+
+		cs->count++;
 		bt_ctf_stream_append_event(cs->stream, event);
+	}
 
 	bt_ctf_event_put(event);
 	return cs ? 0 : -1;
@@ -724,7 +746,7 @@ static int setup_streams(struct ctf_writer *cw, struct perf_session *session)
 	 * Try to get the number of cpus used in the data file,
 	 * if not present fallback to the MAX_CPUS.
 	 */
-	if (!ph)
+	if (!ph || !ph->env.nr_cpus_avail)
 		ncpus = MAX_CPUS;
 	else
 		ncpus = ph->env.nr_cpus_avail;
Signature · 1 line
1.9.3
author reviewer
#14 lore raw

PATCH 8/8 perf data: Add support for setting ordered_events queue size

In reply to Jiri Olsa

Adding support to limit the size of ordered_events queue, so we could control allocation size of perf data files without proper finished round events.

Cc Arnaldo Carvalho de Melo <[email protected]>
Cc David Ahern <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Jeremie Galarneau <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Sebastian Andrzej Siewior <[email protected]>
Cc Tom Zanussi <[email protected]>
---
 tools/perf/util/data-convert-bt.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
tools/perf/util/data-convert-bt.c +22 -0
index df95fac399d7..c3a4a68ab804 100644
@@ -74,6 +74,9 @@ struct convert {
 
 	u64			events_size;
 	u64			events_count;
+
+	/* Ordered events configured queue size. */
+	u64			queue_size;
 };
 
 static int value_set(struct bt_ctf_field_type *type,
@@ -969,6 +972,18 @@ static void ctf_writer__flush_streams(struct ctf_writer *cw)
 		ctf_stream__flush(cw->stream[cpu]);
 }
 
+static int convert__config(const char *var, const char *value, void *cb)
+{
+	struct convert *c = cb;
+
+	if (!strcmp(var, "convert.queue-size")) {
+		c->queue_size = perf_config_u64(var, value);
+		return 0;
+	}
+
+	return perf_default_config(var, value, cb);
+}
+
 int bt_convert__perf2ctf(const char *input, const char *path)
 {
 	struct perf_session *session;
@@ -994,6 +1009,8 @@ int bt_convert__perf2ctf(const char *input, const char *path)
 	struct ctf_writer *cw = &c.writer;
 	int err = -1;
 
+	perf_config(convert__config, &c);
+
 	/* CTF writer */
 	if (ctf_writer__init(cw, path))
 		return -1;
@@ -1003,6 +1020,11 @@ int bt_convert__perf2ctf(const char *input, const char *path)
 	if (!session)
 		goto free_writer;
 
+	if (c.queue_size) {
+		ordered_events__set_alloc_size(&session->ordered_events,
+					       c.queue_size);
+	}
+
 	/* CTF writer env/clock setup  */
 	if (ctf_writer__setup_env(cw, session))
 		goto free_session;
Signature · 1 line
1.9.3