Skip to contentSkip to conversation

x86: Add queensbay and crownbay Kconfig files

PATCH New Bin Meng 2 participants 3 messages Dec 4, 2014 – Dec 5, 2014 x86

lore
Share & tools
lore

Bin Meng

author
#0 lore raw

PATCH 18/25 x86: Add queensbay and crownbay Kconfig files

---
 arch/x86/Kconfig               | 13 ++++++++
 arch/x86/cpu/queensbay/Kconfig | 75 ++++++++++++++++++++++++++++++++++++++++++
 board/intel/crownbay/Kconfig   | 20 +++++++++++
 3 files changed, 108 insertions(+)
 create mode 100644 arch/x86/cpu/queensbay/Kconfig
 create mode 100644 board/intel/crownbay/Kconfig
arch/x86/Kconfig +13 -0
index fdfb618..ebf72b3 100644
@@ -32,6 +32,15 @@ config TARGET_CHROMEBOOK_LINK
 	  and it provides a 2560x1700 high resolution touch-enabled LCD
 	  display.
 
+config TARGET_CROWNBAY
+	bool "Support Intel Crown Bay CRB"
+	help
+	  This is the Intel Crown Bay Customer Reference Board. It contains
+	  the Intel Atom Processor E6xx populated on the COM Express module
+	  with 1GB DDR2 soldered down memory and a carrier board with the
+	  Intel Platform Controller Hub EG20T, other system components and
+	  peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS.
+
 endchoice
 
 config RAMBASE
@@ -310,8 +319,12 @@ endmenu
 
 source "arch/x86/cpu/ivybridge/Kconfig"
 
+source "arch/x86/cpu/queensbay/Kconfig"
+
 source "board/coreboot/coreboot/Kconfig"
 
 source "board/google/chromebook_link/Kconfig"
 
+source "board/intel/crownbay/Kconfig"
+
 endmenu
arch/x86/cpu/queensbay/Kconfig new file +75 -0

75 lines not on this page · raw message

board/intel/crownbay/Kconfig new file +20 -0
new file mode 100644
index 0000000..4709f9b
@@ -0,0 +1,20 @@
+if TARGET_CROWNBAY
+
+config SYS_BOARD
+	default "crownbay"
+
+config SYS_VENDOR
+	default "intel"
+
+config SYS_SOC
+	default "queensbay"
+
+config SYS_CONFIG_NAME
+	default "crownbay"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	select INTEL_QUEENSBAY
+	select BOARD_ROMSIZE_KB_1024
+
+endif
Signature · 1 line
1.8.2.1
#1 lore raw

PATCH 18/25 x86: Add queensbay and crownbay Kconfig files

Hi Bin,

Quoted 75 lines · Bin Meng
---
 arch/x86/Kconfig               | 13 ++++++++
 arch/x86/cpu/queensbay/Kconfig | 75 ++++++++++++++++++++++++++++++++++++++++++
 board/intel/crownbay/Kconfig   | 20 +++++++++++
 3 files changed, 108 insertions(+)
 create mode 100644 arch/x86/cpu/queensbay/Kconfig
 create mode 100644 board/intel/crownbay/Kconfig
arch/x86/Kconfig +13 -0
index fdfb618..ebf72b3 100644
@@ -32,6 +32,15 @@ config TARGET_CHROMEBOOK_LINK
          and it provides a 2560x1700 high resolution touch-enabled LCD
          display.
 
+config TARGET_CROWNBAY
+       bool "Support Intel Crown Bay CRB"
+       help
+         This is the Intel Crown Bay Customer Reference Board. It contains
+         the Intel Atom Processor E6xx populated on the COM Express module
+         with 1GB DDR2 soldered down memory and a carrier board with the
+         Intel Platform Controller Hub EG20T, other system components and
+         peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS.
+
 endchoice
 
 config RAMBASE
@@ -310,8 +319,12 @@ endmenu
 
 source "arch/x86/cpu/ivybridge/Kconfig"
 
+source "arch/x86/cpu/queensbay/Kconfig"
+
 source "board/coreboot/coreboot/Kconfig"
 
 source "board/google/chromebook_link/Kconfig"
 
+source "board/intel/crownbay/Kconfig"
+
 endmenu
arch/x86/cpu/queensbay/Kconfig new file +27 -0
new file mode 100644
index 0000000..3441413
@@ -0,0 +1,75 @@
+#
+# Copyright (C) 2014, Bin Meng <[email protected]>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+config INTEL_QUEENSBAY
+       bool
+       select HAVE_FSP
+       select HAVE_CMC
+
+if INTEL_QUEENSBAY
+
+config HAVE_FSP
+       bool "Add an Firmware Support Package binary"
+       help
+         Select this option to add an Firmware Support Package binary to
+         the resulting U-Boot image. It is a binary blob which U-Boot uses
+         to set up SDRAM and other chipset specific initialization.
+
+         Note: Without this binary U-Boot will not be able to set up its
+         SDRAM so will not boot.
+
+config FSP_FILE
+       string "Firmware Support Package binary path and filename"
+       depends on HAVE_FSP
+       default "fsp.bin"

arch/x86/cpu/queensbay/Kconfig line 37

Quoted 10 lines
arch/x86/cpu/queensbay/Kconfig new file +10 -0
+       help
+         The path and filename of the file to use as Firmware Support Package
+         binary.
+
+config FSP_LOCATION
+       hex "Firmware Support Package binary location"
+       depends on HAVE_FSP
+       default 0xfffc0000
+       help
+         FSP is not Pisition Independent Code (PIC) and the whole FSP has to

Position

arch/x86/cpu/queensbay/Kconfig line 47

Quoted 10 lines
arch/x86/cpu/queensbay/Kconfig new file +10 -0
+         be rebased if it is placed at a location which is different from the
+         perferred base address specified during the FSP build. Use Intel's
+         Binary Configuration Tool (BCT) to do the rebase.
+
+         The default base address of 0xfffc0000 indicates that the binary must
+         be located at offset 0xc0000 from the beginning of a 1MB flash device.
+
+config FSP_TEMP_RAM_ADDR
+       hex
+       default 0x2000000

help?

arch/x86/cpu/queensbay/Kconfig line 54

Quoted 7 lines
arch/x86/cpu/queensbay/Kconfig new file +7 -0
+
+config HAVE_CMC
+       bool "Add a Chipset Micro Code state machine binary"
+       help
+         Select this option to add a Chipset Micro Code state machine binary
+         to the resulting U-Boot image. It is a binary blob which must be put
+         in the flash for the processor to access when power up.

powered up

Can you add help about what it does?

arch/x86/cpu/queensbay/Kconfig line 59

Quoted 5 lines
arch/x86/cpu/queensbay/Kconfig new file +5 -0
+
+config CMC_FILE
+       string "Chipset Micro Code state machine binary path and filename"
+       depends on HAVE_CMC
+       default "C0_22211.BIN"

Can we use lower case please?

Quoted 43 lines
arch/x86/cpu/queensbay/Kconfig new file +16 -0
+       help
+         The path and filename of the file to use as Chipset Micro Code
+         state machine binary.
+
+config CMC_LOCATION
+       hex "Chipset Micro Code state machine binary location"
+       depends on HAVE_CMC
+       default 0xfffb0000
+       help
+         The location of the CMC binary is determined by a strap. It must be
+         put in flash at a location matching the strap-determined base address.
+
+         The default base address of 0xfffb0000 indicates that the binary must
+         be located at offset 0xb0000 from the beginning of a 1MB flash device.
+
+endif
board/intel/crownbay/Kconfig new file +20 -1
new file mode 100644
index 0000000..4709f9b
@@ -0,0 +1,20 @@
+if TARGET_CROWNBAY
+
+config SYS_BOARD
+       default "crownbay"
+
+config SYS_VENDOR
+       default "intel"
+
+config SYS_SOC
+       default "queensbay"
+
+config SYS_CONFIG_NAME
+       default "crownbay"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+       def_bool y
+       select INTEL_QUEENSBAY
+       select BOARD_ROMSIZE_KB_1024
+
+endif
--
Quoted 2 lines

1.8.2.1

Regards,
Simon

author
#2 lore raw

PATCH 18/25 x86: Add queensbay and crownbay Kconfig files

Hi Simon,

Quoted 83 lines · Simon Glass

Hi Bin,

Quoted 79 lines · Bin Meng
---
 arch/x86/Kconfig               | 13 ++++++++
 arch/x86/cpu/queensbay/Kconfig | 75 ++++++++++++++++++++++++++++++++++++++++++
 board/intel/crownbay/Kconfig   | 20 +++++++++++
 3 files changed, 108 insertions(+)
 create mode 100644 arch/x86/cpu/queensbay/Kconfig
 create mode 100644 board/intel/crownbay/Kconfig
arch/x86/Kconfig +13 -0
index fdfb618..ebf72b3 100644
@@ -32,6 +32,15 @@ config TARGET_CHROMEBOOK_LINK
          and it provides a 2560x1700 high resolution touch-enabled LCD
          display.
 
+config TARGET_CROWNBAY
+       bool "Support Intel Crown Bay CRB"
+       help
+         This is the Intel Crown Bay Customer Reference Board. It contains
+         the Intel Atom Processor E6xx populated on the COM Express module
+         with 1GB DDR2 soldered down memory and a carrier board with the
+         Intel Platform Controller Hub EG20T, other system components and
+         peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS.
+
 endchoice
 
 config RAMBASE
@@ -310,8 +319,12 @@ endmenu
 
 source "arch/x86/cpu/ivybridge/Kconfig"
 
+source "arch/x86/cpu/queensbay/Kconfig"
+
 source "board/coreboot/coreboot/Kconfig"
 
 source "board/google/chromebook_link/Kconfig"
 
+source "board/intel/crownbay/Kconfig"
+
 endmenu
arch/x86/cpu/queensbay/Kconfig new file +31 -0
new file mode 100644
index 0000000..3441413
@@ -0,0 +1,75 @@
+#
+# Copyright (C) 2014, Bin Meng <[email protected]>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+config INTEL_QUEENSBAY
+       bool
+       select HAVE_FSP
+       select HAVE_CMC
+
+if INTEL_QUEENSBAY
+
+config HAVE_FSP
+       bool "Add an Firmware Support Package binary"
+       help
+         Select this option to add an Firmware Support Package binary to
+         the resulting U-Boot image. It is a binary blob which U-Boot uses
+         to set up SDRAM and other chipset specific initialization.
+
+         Note: Without this binary U-Boot will not be able to set up its
+         SDRAM so will not boot.
+
+config FSP_FILE
+       string "Firmware Support Package binary path and filename"
+       depends on HAVE_FSP
+       default "fsp.bin"
+       help
+         The path and filename of the file to use as Firmware Support Package
+         binary.
+
Quoted 8 lines

arch/x86/cpu/queensbay/Kconfig line 37

Quoted 6 lines
arch/x86/cpu/queensbay/Kconfig new file +6 -0
+config FSP_LOCATION
+       hex "Firmware Support Package binary location"
+       depends on HAVE_FSP
+       default 0xfffc0000
+       help
+         FSP is not Pisition Independent Code (PIC) and the whole FSP has to

Position

OK.

Quoted 4 lines
Quoted 4 lines
arch/x86/cpu/queensbay/Kconfig new file +4 -0
+         be rebased if it is placed at a location which is different from the
+         perferred base address specified during the FSP build. Use Intel's
+         Binary Configuration Tool (BCT) to do the rebase.
+
Quoted 8 lines

arch/x86/cpu/queensbay/Kconfig line 47

Quoted 6 lines
arch/x86/cpu/queensbay/Kconfig new file +6 -0
+         The default base address of 0xfffc0000 indicates that the binary must
+         be located at offset 0xc0000 from the beginning of a 1MB flash device.
+
+config FSP_TEMP_RAM_ADDR
+       hex
+       default 0x2000000

help?

OK.

Quoted 11 lines

arch/x86/cpu/queensbay/Kconfig line 54

Quoted 7 lines
arch/x86/cpu/queensbay/Kconfig new file +7 -0
+
+config HAVE_CMC
+       bool "Add a Chipset Micro Code state machine binary"
+       help
+         Select this option to add a Chipset Micro Code state machine binary
+         to the resulting U-Boot image. It is a binary blob which must be put
+         in the flash for the processor to access when power up.

powered up

Can you add help about what it does?

The datasheet does not mention too much details about CMC, but I will try adding more help about it.

Quoted 7 lines

arch/x86/cpu/queensbay/Kconfig line 59

Quoted 5 lines
arch/x86/cpu/queensbay/Kconfig new file +5 -0
+
+config CMC_FILE
+       string "Chipset Micro Code state machine binary path and filename"
+       depends on HAVE_CMC
+       default "C0_22211.BIN"

Can we use lower case please?

Yes.

[snip]

Regards,
Bin