Skip to contentSkip to conversation

powerpc/p2041rdb: Convert to generic board

PATCH New Chris Packham 2 participants 3 messages Dec 10, 2014

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 powerpc/p2041rdb: Convert to generic board

Add the following configuration:
o CONFIG_SYS_GENERIC_BOARD
o CONFIG_DISPLAY_BOARDINFO

---
Builds, pings and boots a kernel. Any other testing needed?

 include/configs/P2041RDB.h | 2 ++
 1 file changed, 2 insertions(+)
include/configs/P2041RDB.h +2 -0
index 2357791..22a1513 100644
@@ -13,6 +13,8 @@
 
 #define CONFIG_P2041RDB
 #define CONFIG_PHYS_64BIT
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_PPC_P2041
 
 #ifdef CONFIG_RAMBOOT_PBL
Signature · 1 line
2.2.0.rc0
#1 lore raw

PATCH 1/1 powerpc/p2041rdb: Convert to generic board

Quoted 17 lines · Chris Packham

Add the following configuration:
o CONFIG_SYS_GENERIC_BOARD
o CONFIG_DISPLAY_BOARDINFO

---
Builds, pings and boots a kernel. Any other testing needed?

 include/configs/P2041RDB.h | 2 ++
 1 file changed, 2 insertions(+)
include/configs/P2041RDB.h +0 -0
index 2357791..22a1513 100644

include/configs/P2041RDB.h line 20

Quoted 8 lines
include/configs/P2041RDB.h +2 -0
@@ -13,6 +13,8 @@
 
 #define CONFIG_P2041RDB
 #define CONFIG_PHYS_64BIT
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_PPC_P2041
 
 #ifdef CONFIG_RAMBOOT_PBL

A patch is already sent http://patchwork.ozlabs.org/patch/416318/. No action from your side.

York

#2 lore raw

PATCH 1/1 powerpc/p2041rdb: Convert to generic board

Quoted 24 lines · York Sun
Quoted 23 lines · Chris Packham

Add the following configuration:
o CONFIG_SYS_GENERIC_BOARD
o CONFIG_DISPLAY_BOARDINFO

---
Builds, pings and boots a kernel. Any other testing needed?

 include/configs/P2041RDB.h | 2 ++
 1 file changed, 2 insertions(+)
include/configs/P2041RDB.h +2 -0
index 2357791..22a1513 100644
@@ -13,6 +13,8 @@
 
 #define CONFIG_P2041RDB
 #define CONFIG_PHYS_64BIT
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_PPC_P2041
 
Quoted 8 lines

include/configs/P2041RDB.h line 20

Quoted 2 lines
include/configs/P2041RDB.h +0 -0
 #ifdef CONFIG_RAMBOOT_PBL

A patch is already sent http://patchwork.ozlabs.org/patch/416318/. No action from your side.

York

OK thanks. I did take a quick look in u-boot-qoiriq.git and u-boot-mpc85xx.git.