website: introduce asciidoc website generation framework
Alexander Aring
maintainerPATCH 1/1 website: introduce asciidoc website generation framework
Hi,
this series introduce some files to build some website with asciidoc. Feel free to add own information and then we simple update the website of
http://wpan.cakelab.org/.
- Alex
Alexander Aring (1):
website: inital commit
website/.gitingore | 1 + website/Makefile | 5 +++ website/index.txt | 128 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 134 insertions(+) create mode 100644 website/.gitingore create mode 100644 website/Makefile create mode 100644 website/index.txt
Signature · 1 line
2.1.3
Alexander Aring
maintainerPATCH 1/1 website: inital commit
This is the initial commit for the website asciidoc framework of:
--- website/.gitingore | 1 + website/Makefile | 5 +++ website/index.txt | 128 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 134 insertions(+) create mode 100644 website/.gitingore create mode 100644 website/Makefile create mode 100644 website/index.txt
website/.gitingore new file +1 -0
@@ -0,0 +1 @@ +index.html
website/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +all: + asciidoc -b html5 -a icons -a toc2 -a theme=flask index.txt + +clean: + rm index.html
website/index.txt new file +128 -0
128 lines not on this page · raw message
Signature · 1 line
2.1.3
Re: [PATCH wpan-misc] website: inital commit
Hello.
Good to see this getting a bit more documented. Some remarks inline.
Quoted 41 lines · Alexander Aring
This is the initial commit for the website asciidoc framework of:
Signed-off-by Alexander Aring <[email protected]>--- website/.gitingore | 1 + website/Makefile | 5 +++ website/index.txt | 128 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 134 insertions(+)create mode 100644 website/.gitingore
create mode 100644 website/Makefile
create mode 100644website/index.txtwebsite/.gitingore new file +1
-0@@ -0,0 +1 @@ +index.htmlwebsite/Makefile new file +5
-0@@ -0,0 +1,5 @@ +all: + asciidoc -b html5 -a icons -a toc2 -a theme=flask index.txt + +clean: + rm index.htmlwebsite/index.txt new file +2
-0@@ -0,0 +1,128 @@ +linux-wpan +==========
website/index.txt line 12
Quoted 10 lines
website/index.txt new file +10
-0+Mailinglist <[email protected]> + +wpan-tools +---------- + +To access the nl802154 netlink inteface you will need the wpan-tools. + +Dependencies: + +- netlink library http://www.infradead.org/~tgr/libnl/[libnl].
Better name it libnl-3 here as it does not work with libnl-1 and libnl-2
Quoted 27 lines
website/index.txt new file +4
-0+These tools contains: + +[horizontal] +*iwpan*:: based on the wirelesshttp://wireless.kernel.org/en/users/Documentation/iw[iw] tool.
website/index.txt new file +4
-0+ +Download +~~~~~~~~ +For the last release check outhttp://wpan.cakelab.org/releases/[releases] page:
website/index.txt new file +12
-0+ +http://wpan.cakelab.org/releases/ + +Supported Hardware +------------------ + +.Supported 802.15.4 Hardware +[cols="3,4,2,^2,12",options="header"] +|============================================================= +|Transceiver |Supported |Driver | Bus |Where to buy +|at86rf230 |no |at86rf230? | SPI | +|at86rf231 |yes |at86rf230 | SPI |http://downloads.qi-hardware.com/people/werner/wpan/web/[atben] Out of stock. Mailto linux-wpan and Werner to produce maybe new ones. Or contact
http://en.qi-hardware.com/wiki/Main_Page[qi-hardware].
+|at86rf233 |yes |at86rf230 | SPI |
http://openlabs.co/store/Raspberry-Pi-802.15.4-radio[openlabs]
Quoted 6 lines
+|at86rf212 |yes |at86rf230 | SPI | +|atusb |not mainline yet |atusb | USB |http://downloads.qi-hardware.com/people/werner/wpan/web/[atusb] Out of stock. Mailto linux-wpan and Werner to produce maybe new ones. Or contact
http://en.qi-hardware.com/wiki/Main_Page[qi-hardware].
+|=============================================================
Maybe mention the other drivers we have mainline here as well? CC2520 and MRF24j40 are fully supported or not?
As a sidenote I build and updated the firmware for my atusb and did some initial testing. Nothing on the RF side yet as I wait for more hardware to test against. I'm willing to bring this driver mainline and update it as needed. So far I only made sure that atusb and at86rf230 share the same header file for register defines to avoid duplication.
Once I have other hardware I will test the RF side of things and start to work on asnyc xmit. Also need to talk to Werner if he is happy with the fw interface. After that I will send out a RFC for it.
regards
Stefan Schmidt
Alexander Aring
maintainerRe: [PATCH wpan-misc] website: inital commit
Quoted 50 lines · Stefan Schmidt
Hello.
Good to see this getting a bit more documented. Some remarks inline.
Quoted 45 lines · Alexander Aring
This is the initial commit for the website asciidoc framework of:
Signed-off-by Alexander Aring <[email protected]>--- website/.gitingore | 1 + website/Makefile | 5 +++ website/index.txt | 128 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 134 insertions(+) create mode 100644 website/.gitingore create mode 100644 website/Makefile create mode 100644 website/index.txtwebsite/.gitingore new file +1
-0@@ -0,0 +1 @@ +index.htmlwebsite/Makefile new file +5
-0@@ -0,0 +1,5 @@ +all: + asciidoc -b html5 -a icons -a toc2 -a theme=flask index.txt + +clean: + rm index.htmlwebsite/index.txt new file +6
-0@@ -0,0 +1,128 @@ +linux-wpan +========== +Mailinglist <[email protected]> + +wpan-tools +----------
Quoted 9 lines
website/index.txt line 12
Quoted 6 lines
website/index.txt new file +6
-0+ +To access the nl802154 netlink inteface you will need the wpan-tools. + +Dependencies: + +- netlink library http://www.infradead.org/~tgr/libnl/[libnl].Better name it libnl-3 here as it does not work with libnl-1 and libnl-2
ok. I thought also about that.
The original iw tool has backwards compat. to older libnl version. We could fix that inside the wpan-tools. But for now indeed libnl-3 is supported only. I will change to it and maybe we have also this backwards compat like iw.
Quoted 28 lines
Quoted 28 lines
website/index.txt new file +4
-0+These tools contains: + +[horizontal] +*iwpan*:: based on the wirelesshttp://wireless.kernel.org/en/users/Documentation/iw[iw] tool.
website/index.txt new file +4
-0+ +Download +~~~~~~~~ +For the last release check outhttp://wpan.cakelab.org/releases/[releases] page:
website/index.txt new file +12
-0+ +http://wpan.cakelab.org/releases/ + +Supported Hardware +------------------ + +.Supported 802.15.4 Hardware +[cols="3,4,2,^2,12",options="header"] +|============================================================= +|Transceiver |Supported |Driver | Bus |Where to buy +|at86rf230 |no |at86rf230? | SPI | +|at86rf231 |yes |at86rf230 | SPI |http://downloads.qi-hardware.com/people/werner/wpan/web/[atben] Out of stock. Mailto linux-wpan and Werner to produce maybe new ones. Or contact
http://en.qi-hardware.com/wiki/Main_Page[qi-hardware].
+|at86rf233 |yes |at86rf230 | SPI |
http://openlabs.co/store/Raspberry-Pi-802.15.4-radio[openlabs]
+|at86rf212 |yes |at86rf230 | SPI |
Quoted 8 lines
Quoted 5 lines
+|atusb |not mainline yet |atusb | USB |
http://downloads.qi-hardware.com/people/werner/wpan/web/[atusb] Out of stock. Mailto linux-wpan and Werner to produce maybe new ones. Or contact
http://en.qi-hardware.com/wiki/Main_Page[qi-hardware].
+|=============================================================Maybe mention the other drivers we have mainline here as well? CC2520 and MRF24j40 are fully supported or not?
Don't know about these transceivers I have CC2520 here but these are buildin inside some contiki nodes and I don't have any pinout headers for these.
Specially MRF24j40 have some different types and I don't know which type is now supported. The driver maintainers can send patches to linux-wpan and I will apply changes to wpan-misc and generate a new website.
For futher maybe we should add some "features" collumn because many of them doesn't support all driver callbacks.
Quoted 6 lines
As a sidenote I build and updated the firmware for my atusb and did some initial testing. Nothing on the RF side yet as I wait for more hardware to test against. I'm willing to bring this driver mainline and update it as needed. So far I only made sure that atusb and at86rf230 share the same header file for register defines to avoid duplication.
ok.
Quoted 5 lines
Once I have other hardware I will test the RF side of things and start to work on asnyc xmit. Also need to talk to Werner if he is happy with the fw interface. After that I will send out a RFC for it.
ok.
- Alex
Stefan Schmidt
maintainerRe: [PATCH wpan-misc] website: inital commit
Hello.
Quoted 59 lines · Alexander Aring
Quoted 49 lines · Stefan Schmidt
Hello.
Good to see this getting a bit more documented. Some remarks inline.
Quoted 44 lines · Alexander Aring
This is the initial commit for the website asciidoc framework of:
Signed-off-by Alexander Aring <[email protected]>--- website/.gitingore | 1 + website/Makefile | 5 +++ website/index.txt | 128 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 134 insertions(+) create mode 100644 website/.gitingore create mode 100644 website/Makefile create mode 100644 website/index.txtwebsite/.gitingore new file +1
-0@@ -0,0 +1 @@ +index.htmlwebsite/Makefile new file +5
-0@@ -0,0 +1,5 @@ +all: + asciidoc -b html5 -a icons -a toc2 -a theme=flask index.txt + +clean: + rm index.htmlwebsite/index.txt new file +5
-0@@ -0,0 +1,128 @@ +linux-wpan +========== +Mailinglist <[email protected]> + +wpan-toolsQuoted 9 lines
website/index.txt line 12
Quoted 7 lines
website/index.txt new file +7
-0+---------- + +To access the nl802154 netlink inteface you will need the wpan-tools. + +Dependencies: + +- netlink library http://www.infradead.org/~tgr/libnl/[libnl].Better name it libnl-3 here as it does not work with libnl-1 and libnl-2
Quoted 6 lines
ok. I thought also about that.
The original iw tool has backwards compat. to older libnl version. We could fix that inside the wpan-tools. But for now indeed libnl-3 is supported only. I will change to it and maybe we have also this backwards compat like iw.
I would say that really depends on how ugly this compat would be and how many people are actually need it.
For now using libnl-3 only is fine I would say.
Quoted 35 lines
Quoted 27 lines
Quoted 27 lines
website/index.txt new file +4
-0+These tools contains: + +[horizontal] +*iwpan*:: based on the wirelesshttp://wireless.kernel.org/en/users/Documentation/iw[iw] tool.
website/index.txt new file +4
-0+ +Download +~~~~~~~~ +For the last release check outhttp://wpan.cakelab.org/releases/[releases] page:
website/index.txt new file +12
-0+ +http://wpan.cakelab.org/releases/ + +Supported Hardware +------------------ + +.Supported 802.15.4 Hardware +[cols="3,4,2,^2,12",options="header"] +|============================================================= +|Transceiver |Supported |Driver | Bus |Where to buy +|at86rf230 |no |at86rf230? | SPI | +|at86rf231 |yes |at86rf230 | SPI |http://downloads.qi-hardware.com/people/werner/wpan/web/[atben] Out of stock. Mailto linux-wpan and Werner to produce maybe new ones. Or contact
http://en.qi-hardware.com/wiki/Main_Page[qi-hardware].
+|at86rf233 |yes |at86rf230 | SPI |
http://openlabs.co/store/Raspberry-Pi-802.15.4-radio[openlabs]Quoted 8 lines
Quoted 6 lines
+|at86rf212 |yes |at86rf230 | SPI | +|atusb |not mainline yet |atusb | USB |http://downloads.qi-hardware.com/people/werner/wpan/web/[atusb] Out of stock. Mailto linux-wpan and Werner to produce maybe new ones. Or contact
http://en.qi-hardware.com/wiki/Main_Page[qi-hardware].
+|=============================================================Maybe mention the other drivers we have mainline here as well? CC2520 and MRF24j40 are fully supported or not?
Quoted 7 lines
Don't know about these transceivers I have CC2520 here but these are buildin inside some contiki nodes and I don't have any pinout headers for these.
Specially MRF24j40 have some different types and I don't know which type is now supported. The driver maintainers can send patches to linux-wpan and I will apply changes to wpan-misc and generate a new website.
This sounds fair to me. People using the driver can better comment on this.
Quoted 2 lines
For futher maybe we should add some "features" collumn because many of them doesn't support all driver callbacks.
I think this is a good idea.
regards
Stefan Schmidt
Stefan Schmidt
maintainerRe: [PATCH wpan-misc] website: inital commit
In reply to Alexander AringHello.
website/index.txt line 117
Quoted 8 lines · Alexander Aring
website/index.txt new file +8
-0+Rework +~~~~~~ + +Currently a rework of 802.15.4 subsystem is in progress. + +The rework will contains a new netlink API and a general handling about frame creation and parsing. + +.Supported 802.15.4 Hardware
Better give this table a different name. :)
website/index.txt line 128
Quoted 11 lines
+[options="header"]
+|======================================= +|Milestone | Description | state +|1. nl802154 | new netlink framework | [green]#mostly done# +|2. crypto-layer | accessable over nl802154 and tools | [red]#TODO# +|3. frame parsing | remove bugs, more generical | [red]#TODO# +|=======================================website/index.txt new file +4
-0+ +For the nl802154 framework you will need the wpan-tools, older kernels need lowpan-tools but this is not recommended. + +// vim: set syntax=asciidoc:
regards
Stefan Schmidt
Alexander Aring
maintainerRe: [PATCH wpan-misc] website: inital commit
Quoted 14 lines · Stefan Schmidt
Hello.
website/index.txt line 117
Quoted 8 lines · Alexander Aring
website/index.txt new file +8
-0+Rework +~~~~~~ + +Currently a rework of 802.15.4 subsystem is in progress. + +The rework will contains a new netlink API and a general handling about frame creation and parsing. + +.Supported 802.15.4 HardwareBetter give this table a different name. :)
ok, I will fix that in the next series. Thanks.
- Alex