Skip to contentSkip to conversation

ARM: dts: tegra20: fix GR3D, DSI unit and reg base addresses

PATCH Applied Dmitry Osipenko 3 participants 3 messages Dec 12, 2014 – Jan 7, 2015

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: tegra20: fix GR3D, DSI unit and reg base addresses

Commit 58ecb23f64ee ("ARM: tegra: add missing unit addresses to DT") added unit address and changed reg base for GR3D and DSI host1x modules, but these addresses belongs to GR2D and TVO modules respectively. Fix it by changing modules unit and reg base addresses to proper ones.

Fixes 58ecb23f64ee (ARM: tegra: add missing unit addresses to DT)
Cc <[email protected]> # v3.13+
---
 arch/arm/boot/dts/tegra20.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/boot/dts/tegra20.dtsi +4 -4
index 8acf5d8..f76fe94 100644
@@ -68,9 +68,9 @@
 			reset-names = "2d";
 		};
 
-		gr3d at 54140000 {
+		gr3d at 54180000 {
 			compatible = "nvidia,tegra20-gr3d";
-			reg = <0x54140000 0x00040000>;
+			reg = <0x54180000 0x00040000>;
 			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
 			resets = <&tegra_car 24>;
 			reset-names = "3d";
@@ -130,9 +130,9 @@
 			status = "disabled";
 		};
 
-		dsi at 542c0000 {
+		dsi at 54300000 {
 			compatible = "nvidia,tegra20-dsi";
-			reg = <0x542c0000 0x00040000>;
+			reg = <0x54300000 0x00040000>;
 			clocks = <&tegra_car TEGRA20_CLK_DSI>;
 			resets = <&tegra_car 48>;
 			reset-names = "dsi";
Signature · 1 line
2.2.0
Reviewed-by on v1 1/1
#1 lore raw
Quoted 4 lines · Dmitry Osipenko

Commit 58ecb23f64ee ("ARM: tegra: add missing unit addresses to DT") added unit address and changed reg base for GR3D and DSI host1x modules, but these addresses belongs to GR2D and TVO modules respectively. Fix it by changing modules unit and reg base addresses to proper ones.

Checked with the TRM, you are absolutely correct.

#2 lore raw
In reply to Dmitry Osipenko
Quoted 11 lines · Dmitry Osipenko

Commit 58ecb23f64ee ("ARM: tegra: add missing unit addresses to DT") added unit address and changed reg base for GR3D and DSI host1x modules, but these addresses belongs to GR2D and TVO modules respectively. Fix it by changing modules unit and reg base addresses to proper ones.

Fixes 58ecb23f64ee (ARM: tegra: add missing unit addresses to DT)
Cc <[email protected]> # v3.13+
---
 arch/arm/boot/dts/tegra20.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Applied, thanks.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150107/73b2c502/attachment.sig>