Skip to contentSkip to conversation

ref-manual: Document USE_DEVFS variable

PATCH Applied Pascal Bach 3 participants 12 messages Jan 7, 2015 – Jan 19, 2015

v1 of 2 Applied Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 ref-manual: Document USE_DEVFS variable

---
 documentation/ref-manual/ref-variables.xml |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)
documentation/ref-manual/ref-variables.xml +17 -0
index e3272fe..7907220 100644
@@ -11199,6 +11199,23 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
             </glossdef>
         </glossentry>
 
+        <glossentry id='var-USE_DEVFS'><glossterm><imagedata fileref="figures/define-generic.png" />USE_DEVFS</glossterm>
+            <info>
+               USE_DEVFS[doc] = "Determines if devtmps is used for/dev population."
+            </info>
+            <glossdef>
+                <para>
+                    Determines if <filename>devtmpfs</filename> is used for <filename>/dev</filename> population.
+                    The default value used for <filename>USE_DEVFS</filename>
+                    is "1" when no default value is specifically set.
+                    Typically, you would set <filename>USE_DEVFS</filename>
+                    to "0" if you like to have a statically populated <filename>/dev</filename>
+                    directory. See: <ulink url='&YOCTO_DOCS_DEV_URL;#selecting-dev-manager'>Development Manual</ulink>
+                    for more information on <filename>/dev</filename> population.
+                </para>
+            </glossdef>
+        </glossentry>
+
         <glossentry id='var-USE_VT'><glossterm><imagedata fileref="figures/define-generic.png" />USE_VT</glossterm>
             <info>
                USE_VT[doc] = "When using SysVinit, determines whether or not to run a getty on any virtual terminals in order to enable logging in through those terminals."
Signature · 1 line
1.7.10.4
#1 lore raw

PATCH 2/2 dev-manual: Add section about /dev population

---
 .../dev-manual/dev-manual-common-tasks.xml         |  104 ++++++++++++++++++++
 1 file changed, 104 insertions(+)
documentation/dev-manual/dev-manual-common-tasks.xml +104 -0
index 17d725b..9072586 100644
@@ -7582,6 +7582,110 @@ Gateways via their Web Interfaces</ulink>"</emphasis>
         </section>
     </section>
 
+    <section id="selecting-dev-manager">
+        <title>Selecting a Device Manager</title>
+
+        <para>
+            Yocto provides multiple ways to manage <filename>/dev</filename>
+            <itemizedlist>
+                <listitem><para>
+                <emphasis>Persistent and pre populated <filename>/dev</filename>:</emphasis>
+                in this case the <filename>/dev</filename> directory is persistent
+                and the required device nodes are created at build time.
+                </para></listitem>
+
+                <listitem><para>
+                <emphasis>Use <filename>devtmps</filename> with a device manager:</emphasis>
+                in this case the <filename>/dev</filename> directory is provided
+                by the kernel as an in memory file system and is automatically
+                populated by the kernel at runtime. Additional configuration of
+                device nodes is done in user space by a device manager like
+                <filename>udev</filename> or <filename>busybox-mdev</filename>.
+                </para></listitem>
+            </itemizedlist>
+        </para>
+
+        <section id="static-dev-management">
+            <title>Use Persistent and pre-populated <filename>/dev</filename></title>
+
+            <para>
+                To use the static method for device population the variable
+                <ulink url='&YOCTO_DOCS_REF_URL;#var-USE_DEVFS'><filename>USE_DEVFS</filename></ulink>
+                needs to be set to 0.
+
+                <literallayout class='monospaced'>
+     USE_DEVFS = "0"
+                </literallayout>
+            </para>
+
+            <para>
+                The content of the resulting <filename>/dev</filename> directory
+                is defined in a Device Table file. The device table to use is defined by the variable
+                <ulink url='&YOCTO_DOCS_REF_URL;#var-IMAGE_DEVICE_TABLES'><filename>IMAGE_DEVICE_TABLES</filename></ulink> and should be set
+                in the <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink>,
+                <ulink url='&YOCTO_DOCS_REF_URL;#var-DISTRO'><filename>DISTRO</filename></ulink>
+                or <filename>local.conf</filename> configuration file.
+            </para>
+
+            <para>
+                If nothing is defined the default <filename>device_table-minimal.txt</filename> is used.
+            </para>
+
+            <para>
+                The population is handled by the <filename>makedevs</filename> utility
+                during image creation.
+
+                <literallayout class='monospaced'>
+     IMAGE_DEVICE_TABLES = "device_table-mymachine.txt"
+                </literallayout>
+
+            </para>
+        </section>
+
+        <section id="devtmps-dev-management">
+            <title>Use <filename>devtmpfs</filename> and a device manager</title>
+
+            <para>
+                To use the dynamic method for device population the variable
+                <ulink url='&YOCTO_DOCS_REF_URL;#var-USE_DEVFS'><filename>USE_DEVFS</filename></ulink>
+                needs to be set to 1. This is the default.
+
+                <literallayout class='monospaced'>
+     USE_DEVFS = "1"
+                </literallayout>
+
+                This way the resulting <filename>/dev</filename> is populated by the kernel
+                using <filename>devtmpfs</filename>. Make sure the corresponding
+                kernel configuration variable <filename>CONFIG_DEVTMPFS</filename> is set
+                when building a linux kernel.
+
+            </para>
+            <para>
+                All devices created by <filename>devtmpfs</filename> will be
+                owned by <filename>root</filename> and have permissions <filename>0600</filename>.
+
+                To have more control over the device nodes a device manager like
+                <filename>udev</filename> or <filename>busybox-mdev</filename>
+                can be used.
+
+                The device manager to use is defined by the variable
+                <filename>VIRTUAL-RUNTIME_dev_manager</filename> and should be set
+                in the <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink>,
+                <ulink url='&YOCTO_DOCS_REF_URL;#var-DISTRO'><filename>DISTRO</filename></ulink>
+                or <filename>local.conf</filename> configuration file.
+
+                <literallayout class='monospaced'>
+
+     VIRTUAL-RUNTIME_dev_manager = "udev"
+
+     # Some alternative values
+     # VIRTUAL-RUNTIME_dev_manager = "busybox-mdev"
+     # VIRTUAL-RUNTIME_dev_manager = "systemd"
+                </literallayout>
+            </para>
+        </section>
+    </section>
+
     <section id="platdev-appdev-srcrev">
         <title>Using an External SCM</title>
 
Signature · 1 line
1.7.10.4
#2 lore raw

Re: [yocto-docs][PATCH 2/2] dev-manual: Add section about /dev population

Quoted 10 lines · Pascal Bach
---
 .../dev-manual/dev-manual-common-tasks.xml         |  104 ++++++++++++++++++++
 1 file changed, 104 insertions(+)
documentation/dev-manual/dev-manual-common-tasks.xml +0 -0
index 17d725b..9072586 100644

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis> · line 7589

Quoted 8 lines
documentation/dev-manual/dev-manual-common-tasks.xml +5 -0
@@ -7582,6 +7582,110 @@ Gateways via their Web Interfaces</ulink>"</emphasis>
         </section>
     </section>
 
+    <section id="selecting-dev-manager">
+        <title>Selecting a Device Manager</title>
+
+        <para>
+            Yocto provides multiple ways to manage <filename>/dev</filename>

add a colon at the end of that line.

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis> · line 7592

Quoted 3 lines
documentation/dev-manual/dev-manual-common-tasks.xml +3 -0
+            <itemizedlist>
+                <listitem><para>
+                <emphasis>Persistent and pre populated <filename>/dev</filename>:</emphasis>

^ hyphenate

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis> · line 7598

Quoted 6 lines
documentation/dev-manual/dev-manual-common-tasks.xml +6 -0
+                in this case the <filename>/dev</filename> directory is persistent
+                and the required device nodes are created at build time.
+                </para></listitem>
+
+                <listitem><para>
+                <emphasis>Use <filename>devtmps</filename> with a device manager:</emphasis>
                                           ^^^^^^^ devtmpfs

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis> · line 7600

Quoted 2 lines
documentation/dev-manual/dev-manual-common-tasks.xml +2 -0
+                in this case the <filename>/dev</filename> directory is provided
+                by the kernel as an in memory file system and is automatically

^ hyphenate

Quoted 35 lines
documentation/dev-manual/dev-manual-common-tasks.xml +35 -0
+                populated by the kernel at runtime. Additional configuration of
+                device nodes is done in user space by a device manager like
+                <filename>udev</filename> or <filename>busybox-mdev</filename>.
+                </para></listitem>
+            </itemizedlist>
+        </para>
+
+        <section id="static-dev-management">
+            <title>Use Persistent and pre-populated <filename>/dev</filename></title>
+
+            <para>
+                To use the static method for device population the variable
+                <ulink url='&YOCTO_DOCS_REF_URL;#var-USE_DEVFS'><filename>USE_DEVFS</filename></ulink>
+                needs to be set to 0.
+
+                <literallayout class='monospaced'>
+     USE_DEVFS = "0"
+                </literallayout>
+            </para>
+
+            <para>
+                The content of the resulting <filename>/dev</filename> directory
+                is defined in a Device Table file. The device table to use is defined by the variable
+                <ulink url='&YOCTO_DOCS_REF_URL;#var-IMAGE_DEVICE_TABLES'><filename>IMAGE_DEVICE_TABLES</filename></ulink> and should be set
+                in the <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink>,
+                <ulink url='&YOCTO_DOCS_REF_URL;#var-DISTRO'><filename>DISTRO</filename></ulink>
+                or <filename>local.conf</filename> configuration file.
+            </para>
+
+            <para>
+                If nothing is defined the default <filename>device_table-minimal.txt</filename> is used.
+            </para>
+
+            <para>
+                The population is handled by the <filename>makedevs</filename> utility

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis> · line 7645

Quoted 10 lines
documentation/dev-manual/dev-manual-common-tasks.xml +10 -0
+                during image creation.
+
+                <literallayout class='monospaced'>
+     IMAGE_DEVICE_TABLES = "device_table-mymachine.txt"
+                </literallayout>
+
+            </para>
+        </section>
+
+        <section id="devtmps-dev-management">
                        ^^^^^^^ devtmpfs

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis> · line 7657

Quoted 12 lines
documentation/dev-manual/dev-manual-common-tasks.xml +12 -0
+            <title>Use <filename>devtmpfs</filename> and a device manager</title>
+
+            <para>
+                To use the dynamic method for device population the variable
+                <ulink url='&YOCTO_DOCS_REF_URL;#var-USE_DEVFS'><filename>USE_DEVFS</filename></ulink>
+                needs to be set to 1. This is the default.
+
+                <literallayout class='monospaced'>
+     USE_DEVFS = "1"
+                </literallayout>
+
+                This way the resulting <filename>/dev</filename> is populated by the kernel

i would add the word "directory" after /dev above.

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis> · line 7660

Quoted 3 lines
documentation/dev-manual/dev-manual-common-tasks.xml +3 -0
+                using <filename>devtmpfs</filename>. Make sure the corresponding
+                kernel configuration variable <filename>CONFIG_DEVTMPFS</filename> is set
+                when building a linux kernel.
                                   ^^^^^ Linux (capitalize)
Quoted 20 lines
documentation/dev-manual/dev-manual-common-tasks.xml +20 -0
+
+            </para>
+            <para>
+                All devices created by <filename>devtmpfs</filename> will be
+                owned by <filename>root</filename> and have permissions <filename>0600</filename>.
+
+                To have more control over the device nodes a device manager like
+                <filename>udev</filename> or <filename>busybox-mdev</filename>
+                can be used.
+
+                The device manager to use is defined by the variable
+                <filename>VIRTUAL-RUNTIME_dev_manager</filename> and should be set
+                in the <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink>,
+                <ulink url='&YOCTO_DOCS_REF_URL;#var-DISTRO'><filename>DISTRO</filename></ulink>
+                or <filename>local.conf</filename> configuration file.
+
+                <literallayout class='monospaced'>
+
+     VIRTUAL-RUNTIME_dev_manager = "udev"
+

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis> · line 7690

Quoted 10 lines
documentation/dev-manual/dev-manual-common-tasks.xml +8 -0
+     # Some alternative values
+     # VIRTUAL-RUNTIME_dev_manager = "busybox-mdev"
+     # VIRTUAL-RUNTIME_dev_manager = "systemd"
+                </literallayout>
+            </para>
+        </section>
+    </section>
+
     <section id="platdev-appdev-srcrev">
         <title>Using an External SCM</title>

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#3 lore raw

Re: [yocto-docs][PATCH 2/2] dev-manual: Add section about /dev population

In reply to Pascal Bach

Pascal,

I have applied this patch with some editing. Also, applied the patch that added the USE_DEVFS variable to the ref-manual.

Thanks,
Scott

Quoted 161 lines

-----Original Message-----
From: [email protected] [mailto:yocto- [email protected]] On Behalf Of Pascal Bach
Sent: Wednesday, January 07, 2015 6:58 AM
To: [email protected]
Subject: [yocto] [yocto-docs][PATCH 2/2] dev-manual: Add section about /dev population

---
.../dev-manual/dev-manual-common-tasks.xml | 104
++++++++++++++++++++

1 file changed, 104 insertions(+)
documentation/dev-manual/dev-manual-common-tasks.xml +0 -0
index 17d725b..9072586 100644
@@ -7582,6 +7582,110 @@ Gateways via their Web

Interfaces</ulink>"</emphasis>

        </section>
    </section>
documentation/dev-manual/dev-manual-common-tasks.xml +8 -0
+    <section id="selecting-dev-manager">
+        <title>Selecting a Device Manager</title>
+
+        <para>
+            Yocto provides multiple ways to manage <filename>/dev</filename>
+            <itemizedlist>
+                <listitem><para>
+                <emphasis>Persistent and pre populated

<filename>/dev</filename>:</emphasis>

documentation/dev-manual/dev-manual-common-tasks.xml +6 -0
+                in this case the <filename>/dev</filename> directory is persistent
+                and the required device nodes are created at build time.
+                </para></listitem>
+
+                <listitem><para>
+                <emphasis>Use <filename>devtmps</filename> with a device

manager:</emphasis>

documentation/dev-manual/dev-manual-common-tasks.xml +5 -0
+                in this case the <filename>/dev</filename> directory is provided
+                by the kernel as an in memory file system and is automatically
+                populated by the kernel at runtime. Additional configuration of
+                device nodes is done in user space by a device manager like
+                <filename>udev</filename> or <filename>busybox-

mdev</filename>.

documentation/dev-manual/dev-manual-common-tasks.xml +6 -0
+                </para></listitem>
+            </itemizedlist>
+        </para>
+
+        <section id="static-dev-management">
+            <title>Use Persistent and pre-populated

<filename>/dev</filename></title>

documentation/dev-manual/dev-manual-common-tasks.xml +4 -0
+
+            <para>
+                To use the static method for device population the variable
+                <ulink url='&YOCTO_DOCS_REF_URL;#var-

USE_DEVFS'><filename>USE_DEVFS</filename></ulink>

documentation/dev-manual/dev-manual-common-tasks.xml +10 -0
+                needs to be set to 0.
+
+                <literallayout class='monospaced'>
+     USE_DEVFS = "0"
+                </literallayout>
+            </para>
+
+            <para>
+                The content of the resulting <filename>/dev</filename> directory
+                is defined in a Device Table file. The device table to use is defined by

the variable
+ <ulink url='&YOCTO_DOCS_REF_URL;#var-
IMAGE_DEVICE_TABLES'><filename>IMAGE_DEVICE_TABLES</filename></ul ink> and should be set
+ in the <ulink url='&YOCTO_DOCS_REF_URL;#var-
MACHINE'><filename>MACHINE</filename></ulink>,
+ <ulink url='&YOCTO_DOCS_REF_URL;#var-
DISTRO'><filename>DISTRO</filename></ulink>

documentation/dev-manual/dev-manual-common-tasks.xml +5 -0
+                or <filename>local.conf</filename> configuration file.
+            </para>
+
+            <para>
+                If nothing is defined the default <filename>device_table-

minimal.txt</filename> is used.

documentation/dev-manual/dev-manual-common-tasks.xml +4 -0
+            </para>
+
+            <para>
+                The population is handled by the <filename>makedevs</filename>

utility

documentation/dev-manual/dev-manual-common-tasks.xml +11 -0
+                during image creation.
+
+                <literallayout class='monospaced'>
+     IMAGE_DEVICE_TABLES = "device_table-mymachine.txt"
+                </literallayout>
+
+            </para>
+        </section>
+
+        <section id="devtmps-dev-management">
+            <title>Use <filename>devtmpfs</filename> and a device

manager</title>

documentation/dev-manual/dev-manual-common-tasks.xml +4 -0
+
+            <para>
+                To use the dynamic method for device population the variable
+                <ulink url='&YOCTO_DOCS_REF_URL;#var-

USE_DEVFS'><filename>USE_DEVFS</filename></ulink>

documentation/dev-manual/dev-manual-common-tasks.xml +7 -0
+                needs to be set to 1. This is the default.
+
+                <literallayout class='monospaced'>
+     USE_DEVFS = "1"
+                </literallayout>
+
+                This way the resulting <filename>/dev</filename> is populated by

the kernel
+ using <filename>devtmpfs</filename>. Make sure the
corresponding
+ kernel configuration variable
<filename>CONFIG_DEVTMPFS</filename> is set

documentation/dev-manual/dev-manual-common-tasks.xml +6 -0
+                when building a linux kernel.
+
+            </para>
+            <para>
+                All devices created by <filename>devtmpfs</filename> will be
+                owned by <filename>root</filename> and have permissions

<filename>0600</filename>.

documentation/dev-manual/dev-manual-common-tasks.xml +3 -0
+
+                To have more control over the device nodes a device manager like
+                <filename>udev</filename> or <filename>busybox-

mdev</filename>

documentation/dev-manual/dev-manual-common-tasks.xml +4 -0
+                can be used.
+
+                The device manager to use is defined by the variable
+                <filename>VIRTUAL-RUNTIME_dev_manager</filename> and

should be set
+ in the <ulink url='&YOCTO_DOCS_REF_URL;#var-
MACHINE'><filename>MACHINE</filename></ulink>,
+ <ulink url='&YOCTO_DOCS_REF_URL;#var-
DISTRO'><filename>DISTRO</filename></ulink>

documentation/dev-manual/dev-manual-common-tasks.xml +14 -1
+                or <filename>local.conf</filename> configuration file.
+
+                <literallayout class='monospaced'>
+
+     VIRTUAL-RUNTIME_dev_manager = "udev"
+
+     # Some alternative values
+     # VIRTUAL-RUNTIME_dev_manager = "busybox-mdev"
+     # VIRTUAL-RUNTIME_dev_manager = "systemd"
+                </literallayout>
+            </para>
+        </section>
+    </section>
+
    <section id="platdev-appdev-srcrev">
        <title>Using an External SCM</title>
 
--

1.7.10.4

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#4 lore raw

Re: [yocto-docs][PATCH 2/2] dev-manual: Add section about /dev population

Hi Scott

Thanks. I had a look at the commits and it looks like commit 7c6c7ac573f92bfc844977e0d7a97ca4aac9bc70 also introduced a strange change on line 946 of dev-manual-common-tasks.xml.

See: https://git.yoctoproject.org/cgit/cgit.cgi/yocto-docs/commit/?id=7c6c7ac573f92bfc844977e0d7a97ca4aac9bc70

Pascal

Quoted 194 lines

-----Original Message-----
From: Rifenbark, Scott M [mailto:[email protected]]
Sent: Samstag, 17. Januar 2015 01:05
To: Bach, Pascal; [email protected]
Subject: RE: [yocto] [yocto-docs][PATCH 2/2] dev-manual: Add section about /dev population

Pascal,

I have applied this patch with some editing. Also, applied the patch that added the USE_DEVFS variable to the ref-manual.

Thanks,
Scott

Quoted 24 lines

-----Original Message-----
From: [email protected] [mailto:yocto- [email protected]] On Behalf Of Pascal Bach
Sent: Wednesday, January 07, 2015 6:58 AM
To: [email protected]
Subject: [yocto] [yocto-docs][PATCH 2/2] dev-manual: Add section about /dev population

---
.../dev-manual/dev-manual-common-tasks.xml | 104
++++++++++++++++++++

1 file changed, 104 insertions(+)
documentation/dev-manual/dev-manual-common-tasks.xml +0 -0
index 17d725b..9072586 100644
@@ -7582,6 +7582,110 @@ Gateways via their Web

Interfaces</ulink>"</emphasis>

        </section>
    </section>

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis>

Quoted 5 lines
documentation/dev-manual/dev-manual-common-tasks.xml +5 -0
+    <section id="selecting-dev-manager">
+        <title>Selecting a Device Manager</title>
+
+        <para>
+            Yocto provides multiple ways to manage

<filename>/dev</filename>

Quoted 5 lines
documentation/dev-manual/dev-manual-common-tasks.xml +3 -0
+            <itemizedlist>
+                <listitem><para>
+                <emphasis>Persistent and pre populated

<filename>/dev</filename>:</emphasis>
+ in this case the <filename>/dev</filename> directory

is persistent

Quoted 1 line

+ and the required device nodes are created at build

time.

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis>

Quoted 4 lines
documentation/dev-manual/dev-manual-common-tasks.xml +4 -0
+                </para></listitem>
+
+                <listitem><para>
+                <emphasis>Use <filename>devtmps</filename> with a

device

Quoted 2 lines

manager:</emphasis>
+ in this case the <filename>/dev</filename> directory

is provided

Quoted 1 line

+ by the kernel as an in memory file system and is

automatically

Quoted 1 line

+ populated by the kernel at runtime. Additional

configuration of

Quoted 1 line

+ device nodes is done in user space by a device manager

like

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis>

Quoted 12 lines

+ <filename>udev</filename> or <filename>busybox-
mdev</filename>.

documentation/dev-manual/dev-manual-common-tasks.xml +6 -0
+                </para></listitem>
+            </itemizedlist>
+        </para>
+
+        <section id="static-dev-management">
+            <title>Use Persistent and pre-populated

<filename>/dev</filename></title>

documentation/dev-manual/dev-manual-common-tasks.xml +3 -0
+
+            <para>
+                To use the static method for device population the

variable

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis>

Quoted 11 lines

+ <ulink url='&YOCTO_DOCS_REF_URL;#var-
USE_DEVFS'><filename>USE_DEVFS</filename></ulink>

documentation/dev-manual/dev-manual-common-tasks.xml +9 -0
+                needs to be set to 0.
+
+                <literallayout class='monospaced'>
+     USE_DEVFS = "0"
+                </literallayout>
+            </para>
+
+            <para>
+                The content of the resulting <filename>/dev</filename>

directory

Quoted 1 line

+ is defined in a Device Table file. The device table to

use is defined by

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis>

Quoted 13 lines

the variable
+ <ulink url='&YOCTO_DOCS_REF_URL;#var-
IMAGE_DEVICE_TABLES'><filename>IMAGE_DEVICE_TABLES</filename></ul ink> and should be set
+ in the <ulink url='&YOCTO_DOCS_REF_URL;#var-
MACHINE'><filename>MACHINE</filename></ulink>,
+ <ulink url='&YOCTO_DOCS_REF_URL;#var-
DISTRO'><filename>DISTRO</filename></ulink>

documentation/dev-manual/dev-manual-common-tasks.xml +5 -0
+                or <filename>local.conf</filename> configuration file.
+            </para>
+
+            <para>
+                If nothing is defined the default

<filename>device_table-

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis>

Quoted 5 lines

minimal.txt</filename> is used.

documentation/dev-manual/dev-manual-common-tasks.xml +4 -0
+            </para>
+
+            <para>
+                The population is handled by the

<filename>makedevs</filename>

Quoted 13 lines

utility

documentation/dev-manual/dev-manual-common-tasks.xml +11 -0
+                during image creation.
+
+                <literallayout class='monospaced'>
+     IMAGE_DEVICE_TABLES = "device_table-mymachine.txt"
+                </literallayout>
+
+            </para>
+        </section>
+
+        <section id="devtmps-dev-management">
+            <title>Use <filename>devtmpfs</filename> and a device

manager</title>

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis>

Quoted 3 lines
documentation/dev-manual/dev-manual-common-tasks.xml +3 -0
+
+            <para>
+                To use the dynamic method for device population the

variable

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis>

Quoted 9 lines

+ <ulink url='&YOCTO_DOCS_REF_URL;#var-
USE_DEVFS'><filename>USE_DEVFS</filename></ulink>

documentation/dev-manual/dev-manual-common-tasks.xml +7 -0
+                needs to be set to 1. This is the default.
+
+                <literallayout class='monospaced'>
+     USE_DEVFS = "1"
+                </literallayout>
+
+                This way the resulting <filename>/dev</filename> is

populated by

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis>

Quoted 10 lines

the kernel
+ using <filename>devtmpfs</filename>. Make sure the
corresponding
+ kernel configuration variable
<filename>CONFIG_DEVTMPFS</filename> is set

documentation/dev-manual/dev-manual-common-tasks.xml +5 -0
+                when building a linux kernel.
+
+            </para>
+            <para>
+                All devices created by <filename>devtmpfs</filename>

will be

Quoted 1 line

+ owned by <filename>root</filename> and have

permissions

documentation/dev-manual/dev-manual-common-tasks.xml

Quoted 3 lines

<filename>0600</filename>.

documentation/dev-manual/dev-manual-common-tasks.xml +2 -0
+
+                To have more control over the device nodes a device

manager like

Quoted 36 lines

+ <filename>udev</filename> or <filename>busybox-
mdev</filename>

documentation/dev-manual/dev-manual-common-tasks.xml +4 -0
+                can be used.
+
+                The device manager to use is defined by the variable
+                <filename>VIRTUAL-RUNTIME_dev_manager</filename> and

should be set
+ in the <ulink url='&YOCTO_DOCS_REF_URL;#var-
MACHINE'><filename>MACHINE</filename></ulink>,
+ <ulink url='&YOCTO_DOCS_REF_URL;#var-
DISTRO'><filename>DISTRO</filename></ulink>

documentation/dev-manual/dev-manual-common-tasks.xml +14 -1
+                or <filename>local.conf</filename> configuration file.
+
+                <literallayout class='monospaced'>
+
+     VIRTUAL-RUNTIME_dev_manager = "udev"
+
+     # Some alternative values
+     # VIRTUAL-RUNTIME_dev_manager = "busybox-mdev"
+     # VIRTUAL-RUNTIME_dev_manager = "systemd"
+                </literallayout>
+            </para>
+        </section>
+    </section>
+
    <section id="platdev-appdev-srcrev">
        <title>Using an External SCM</title>
 
--

1.7.10.4

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#5 lore raw

Re: [yocto-docs][PATCH 2/2] dev-manual: Add section about /dev population

Pascal,

Thanks for catching this. This was a result of cutting-and-pasting text in from the patch. I did not apply the patch in an automated fashion as there was some rewriting to do. So my hand-transposing missed those characters that were present in the email from which I was referencing. I removed them out and will republish the text later today. The commit to get them out is http://git.yoctoproject.org/cgit/cgit.cgi/yocto-docs/commit/?id=3ffbebd6c638e9f5b334dfef1d4e0bcc698ae810.

Thanks,
Scott

Quoted 217 lines

-----Original Message-----
From: Bach, Pascal [mailto:[email protected]]
Sent: Monday, January 19, 2015 12:30 AM
To: Rifenbark, Scott M; [email protected]
Subject: RE: [yocto] [yocto-docs][PATCH 2/2] dev-manual: Add section about /dev population

Hi Scott

Thanks. I had a look at the commits and it looks like commit 7c6c7ac573f92bfc844977e0d7a97ca4aac9bc70 also introduced a strange change on line 946 of dev-manual-common-tasks.xml.

See: https://git.yoctoproject.org/cgit/cgit.cgi/yocto-
docs/commit/?id=7c6c7ac573f92bfc844977e0d7a97ca4aac9bc70

Pascal

Quoted 94 lines

-----Original Message-----
From: Rifenbark, Scott M [mailto:[email protected]]
Sent: Samstag, 17. Januar 2015 01:05
To: Bach, Pascal; [email protected]
Subject: RE: [yocto] [yocto-docs][PATCH 2/2] dev-manual: Add section about /dev population

Pascal,

I have applied this patch with some editing. Also, applied the patch that added the USE_DEVFS variable to the ref-manual.

Thanks,
Scott

Quoted 24 lines

-----Original Message-----
From: [email protected] [mailto:yocto- [email protected]] On Behalf Of Pascal Bach
Sent: Wednesday, January 07, 2015 6:58 AM
To: [email protected]
Subject: [yocto] [yocto-docs][PATCH 2/2] dev-manual: Add section about /dev population

---
.../dev-manual/dev-manual-common-tasks.xml | 104
++++++++++++++++++++

1 file changed, 104 insertions(+)
documentation/dev-manual/dev-manual-common-tasks.xml +0 -0
index 17d725b..9072586 100644
@@ -7582,6 +7582,110 @@ Gateways via their Web

Interfaces</ulink>"</emphasis>

        </section>
    </section>

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis>

Quoted 5 lines
documentation/dev-manual/dev-manual-common-tasks.xml +5 -0
+    <section id="selecting-dev-manager">
+        <title>Selecting a Device Manager</title>
+
+        <para>
+            Yocto provides multiple ways to manage

<filename>/dev</filename>

Quoted 5 lines
documentation/dev-manual/dev-manual-common-tasks.xml +3 -0
+            <itemizedlist>
+                <listitem><para>
+                <emphasis>Persistent and pre populated

<filename>/dev</filename>:</emphasis>
+ in this case the <filename>/dev</filename> directory

is persistent

Quoted 1 line

+ and the required device nodes are created at build

time.

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis>

Quoted 4 lines
documentation/dev-manual/dev-manual-common-tasks.xml +4 -0
+                </para></listitem>
+
+                <listitem><para>
+                <emphasis>Use <filename>devtmps</filename> with a

device

Quoted 2 lines

manager:</emphasis>
+ in this case the <filename>/dev</filename> directory

is provided

Quoted 1 line

+ by the kernel as an in memory file system and is

automatically

Quoted 1 line

+ populated by the kernel at runtime. Additional

configuration of

Quoted 2 lines

+ device nodes is done in user space by a device
+ manager

like

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis>

Quoted 12 lines

+ <filename>udev</filename> or <filename>busybox-
mdev</filename>.

documentation/dev-manual/dev-manual-common-tasks.xml +6 -0
+                </para></listitem>
+            </itemizedlist>
+        </para>
+
+        <section id="static-dev-management">
+            <title>Use Persistent and pre-populated

<filename>/dev</filename></title>

documentation/dev-manual/dev-manual-common-tasks.xml +3 -0
+
+            <para>
+                To use the static method for device population the

variable

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis>

Quoted 12 lines

+ <ulink url='&YOCTO_DOCS_REF_URL;#var-
USE_DEVFS'><filename>USE_DEVFS</filename></ulink>

documentation/dev-manual/dev-manual-common-tasks.xml +10 -0
+                needs to be set to 0.
+
+                <literallayout class='monospaced'>
+     USE_DEVFS = "0"
+                </literallayout>
+            </para>
+
+            <para>
+                The content of the resulting
+ <filename>/dev</filename>

directory

Quoted 7 lines
Quoted 2 lines

+ is defined in a Device Table file. The device table
+ to

use is defined by

Quoted 2 lines

the variable
+ <ulink url='&YOCTO_DOCS_REF_URL;#var-

IMAGE_DEVICE_TABLES'><filename>IMAGE_DEVICE_TABLES</filename></

ul

Quoted 97 lines

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis>

Quoted 10 lines

ink> and should be set
+ in the <ulink url='&YOCTO_DOCS_REF_URL;#var-
MACHINE'><filename>MACHINE</filename></ulink>,
+ <ulink url='&YOCTO_DOCS_REF_URL;#var-
DISTRO'><filename>DISTRO</filename></ulink>

documentation/dev-manual/dev-manual-common-tasks.xml +5 -0
+                or <filename>local.conf</filename> configuration file.
+            </para>
+
+            <para>
+                If nothing is defined the default

<filename>device_table-

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis>

Quoted 5 lines

minimal.txt</filename> is used.

documentation/dev-manual/dev-manual-common-tasks.xml +4 -0
+            </para>
+
+            <para>
+                The population is handled by the

<filename>makedevs</filename>

Quoted 13 lines

utility

documentation/dev-manual/dev-manual-common-tasks.xml +11 -0
+                during image creation.
+
+                <literallayout class='monospaced'>
+     IMAGE_DEVICE_TABLES = "device_table-mymachine.txt"
+                </literallayout>
+
+            </para>
+        </section>
+
+        <section id="devtmps-dev-management">
+            <title>Use <filename>devtmpfs</filename> and a device

manager</title>

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis>

Quoted 3 lines
documentation/dev-manual/dev-manual-common-tasks.xml +3 -0
+
+            <para>
+                To use the dynamic method for device population the

variable

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis>

Quoted 9 lines

+ <ulink url='&YOCTO_DOCS_REF_URL;#var-
USE_DEVFS'><filename>USE_DEVFS</filename></ulink>

documentation/dev-manual/dev-manual-common-tasks.xml +7 -0
+                needs to be set to 1. This is the default.
+
+                <literallayout class='monospaced'>
+     USE_DEVFS = "1"
+                </literallayout>
+
+                This way the resulting <filename>/dev</filename> is

populated by

documentation/dev-manual/dev-manual-common-tasks.xml Gateways via their Web Interfaces</ulink>"</emphasis>

Quoted 10 lines

the kernel
+ using <filename>devtmpfs</filename>. Make sure the
corresponding
+ kernel configuration variable
<filename>CONFIG_DEVTMPFS</filename> is set

documentation/dev-manual/dev-manual-common-tasks.xml +5 -0
+                when building a linux kernel.
+
+            </para>
+            <para>
+                All devices created by <filename>devtmpfs</filename>

will be

Quoted 1 line

+ owned by <filename>root</filename> and have

permissions

documentation/dev-manual/dev-manual-common-tasks.xml

Quoted 3 lines

<filename>0600</filename>.

documentation/dev-manual/dev-manual-common-tasks.xml +2 -0
+
+                To have more control over the device nodes a device

manager like

Quoted 36 lines

+ <filename>udev</filename> or <filename>busybox-
mdev</filename>

documentation/dev-manual/dev-manual-common-tasks.xml +4 -0
+                can be used.
+
+                The device manager to use is defined by the variable
+                <filename>VIRTUAL-RUNTIME_dev_manager</filename> and

should be set
+ in the <ulink url='&YOCTO_DOCS_REF_URL;#var-
MACHINE'><filename>MACHINE</filename></ulink>,
+ <ulink url='&YOCTO_DOCS_REF_URL;#var-
DISTRO'><filename>DISTRO</filename></ulink>

documentation/dev-manual/dev-manual-common-tasks.xml +14 -1
+                or <filename>local.conf</filename> configuration file.
+
+                <literallayout class='monospaced'>
+
+     VIRTUAL-RUNTIME_dev_manager = "udev"
+
+     # Some alternative values
+     # VIRTUAL-RUNTIME_dev_manager = "busybox-mdev"
+     # VIRTUAL-RUNTIME_dev_manager = "systemd"
+                </literallayout>
+            </para>
+        </section>
+    </section>
+
    <section id="platdev-appdev-srcrev">
        <title>Using an External SCM</title>
 
--

1.7.10.4

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#6 lore raw
In reply to Pascal Bach
Quoted 10 lines · Pascal Bach
---
 documentation/ref-manual/ref-variables.xml |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)
documentation/ref-manual/ref-variables.xml +0 -0
index e3272fe..7907220 100644

documentation/ref-manual/ref-variables.xml recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3" · line 11204

Quoted 6 lines
documentation/ref-manual/ref-variables.xml +3 -0
@@ -11199,6 +11199,23 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
             </glossdef>
         </glossentry>
 
+        <glossentry id='var-USE_DEVFS'><glossterm><imagedata fileref="figures/define-generic.png" />USE_DEVFS</glossterm>
+            <info>
+               USE_DEVFS[doc] = "Determines if devtmps is used for/dev population."
                                                  ^^^^^^^ ??

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#7 lore raw
Quoted 16 lines

Review

Quoted 7 lines
---
 documentation/ref-manual/ref-variables.xml |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)
(quoted diff) +0 -0

b/documentation/ref-manual/ref-variables.xml

documentation/ref-manual/ref-variables.xml recipes-graphics/xorg-font/font-

Quoted 4 lines

index e3272fe..7907220 100644

documentation/ref-manual/ref-variables.xml +0 -0
@@ -11199,6 +11199,23 @@ recipes-graphics/xorg-font/font-

alias_1.0.3.bb:PR = "${INC_PR}.3"

Quoted 3 lines
documentation/ref-manual/ref-variables.xml +0 -0
             </glossdef>
         </glossentry>
 
Quoted 7 lines

documentation/ref-manual/ref-variables.xml recipes-graphics/xorg-font/font- · line 11202

Quoted 1 line
documentation/ref-manual/ref-variables.xml +1 -0
+        <glossentry id='var-USE_DEVFS'><glossterm><imagedata

fileref="figures/define-generic.png" />USE_DEVFS</glossterm>

documentation/ref-manual/ref-variables.xml recipes-graphics/xorg-font/font- · line 11204

Quoted 2 lines
documentation/ref-manual/ref-variables.xml +2 -0
+            <info>
+               USE_DEVFS[doc] = "Determines if devtmps is used for/dev

population."

                                                  ^^^^^^^ ??

Sorry I don' t understand what you mean. Could you please elaborate?

Thanks

Pascal

#8 lore raw
Quoted 17 lines · Pascal
Quoted 17 lines

Review

Quoted 7 lines
---
 documentation/ref-manual/ref-variables.xml |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)
(quoted diff) +0 -0

b/documentation/ref-manual/ref-variables.xml

documentation/ref-manual/ref-variables.xml recipes-graphics/xorg-font/font-

Quoted 4 lines

index e3272fe..7907220 100644

documentation/ref-manual/ref-variables.xml +0 -0
@@ -11199,6 +11199,23 @@ recipes-graphics/xorg-font/font-

alias_1.0.3.bb:PR = "${INC_PR}.3"

Quoted 4 lines
documentation/ref-manual/ref-variables.xml +1 -0
             </glossdef>
         </glossentry>
 
+        <glossentry id='var-USE_DEVFS'><glossterm><imagedata
Quoted 8 lines
Quoted 6 lines

fileref="figures/define-generic.png" />USE_DEVFS</glossterm>

documentation/ref-manual/ref-variables.xml recipes-graphics/xorg-font/font- · line 11204

Quoted 2 lines
documentation/ref-manual/ref-variables.xml +2 -0
+            <info>
+               USE_DEVFS[doc] = "Determines if devtmps is used for/dev

population."

                                                  ^^^^^^^ ??

Sorry I don' t understand what you mean. Could you please elaborate?

should that not say "devtmpfs", not "devtmps"?

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#9 lore raw
Quoted 21 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
---
 documentation/ref-manual/ref-variables.xml |   17

+++++++++++++++++

Quoted 16 lines
Quoted 16 lines

Review

Quoted 3 lines
 1 file changed, 17 insertions(+)
(quoted diff) +0 -0

b/documentation/ref-manual/ref-variables.xml

documentation/ref-manual/ref-variables.xml recipes-graphics/xorg-font/font-

Quoted 4 lines

index e3272fe..7907220 100644

documentation/ref-manual/ref-variables.xml +0 -0
@@ -11199,6 +11199,23 @@ recipes-graphics/xorg-font/font-

alias_1.0.3.bb:PR = "${INC_PR}.3"

documentation/ref-manual/ref-variables.xml recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"

Quoted 4 lines
documentation/ref-manual/ref-variables.xml +1 -0
             </glossdef>
         </glossentry>
 
+        <glossentry id='var-USE_DEVFS'><glossterm><imagedata

fileref="figures/define-generic.png" />USE_DEVFS</glossterm>

Quoted 2 lines
documentation/ref-manual/ref-variables.xml +2 -0
+            <info>
+               USE_DEVFS[doc] = "Determines if devtmps is used for/dev
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines

population."

                                                  ^^^^^^^ ??

Sorry I don' t understand what you mean. Could you please elaborate?

should that not say "devtmpfs", not "devtmps"?

Of course :)
I didn't see it sorry even with you nice underlining ;). Thanks for pointing it out.

Should I resubmit the patch or is it easier if the committing person fixes it?

Pascal

#10 lore raw
Quoted 25 lines · Pascal
Quoted 25 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
---
 documentation/ref-manual/ref-variables.xml |   17

+++++++++++++++++

Quoted 20 lines
Quoted 19 lines

Review

Quoted 3 lines
 1 file changed, 17 insertions(+)
(quoted diff) +0 -0

b/documentation/ref-manual/ref-variables.xml

documentation/ref-manual/ref-variables.xml recipes-graphics/xorg-font/font-

Quoted 4 lines

index e3272fe..7907220 100644

documentation/ref-manual/ref-variables.xml +0 -0
@@ -11199,6 +11199,23 @@ recipes-graphics/xorg-font/font-

alias_1.0.3.bb:PR = "${INC_PR}.3"

documentation/ref-manual/ref-variables.xml recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"

Quoted 4 lines
documentation/ref-manual/ref-variables.xml +1 -0
             </glossdef>
         </glossentry>
 
+        <glossentry id='var-USE_DEVFS'><glossterm><imagedata

fileref="figures/define-generic.png" />USE_DEVFS</glossterm>

documentation/ref-manual/ref-variables.xml recipes-graphics/xorg-font/font- · line 11204

Quoted 2 lines
documentation/ref-manual/ref-variables.xml +2 -0
+            <info>
+               USE_DEVFS[doc] = "Determines if devtmps is used for/dev

population."

                                                  ^^^^^^^ ??
Quoted 8 lines
Quoted 4 lines
Quoted 1 line

Sorry I don' t understand what you mean. Could you please elaborate?

should that not say "devtmpfs", not "devtmps"?

Of course :)
I didn't see it sorry even with you nice underlining ;). Thanks for pointing it out.

Should I resubmit the patch or is it easier if the committing person fixes it?

normally, just resubmit with [PATCH v2 ...] in the subject, unless
someone like scott says he'll take it as is.

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#11 lore raw
In reply to Pascal Bach
Quoted 10 lines · Pascal Bach
---
 documentation/ref-manual/ref-variables.xml |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)
documentation/ref-manual/ref-variables.xml +0 -0
index e3272fe..7907220 100644

documentation/ref-manual/ref-variables.xml recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3" · line 11204

Quoted 6 lines
documentation/ref-manual/ref-variables.xml +3 -0
@@ -11199,6 +11199,23 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
             </glossdef>
         </glossentry>
 
+        <glossentry id='var-USE_DEVFS'><glossterm><imagedata fileref="figures/define-generic.png" />USE_DEVFS</glossterm>
+            <info>
+               USE_DEVFS[doc] = "Determines if devtmps is used for/dev population."

^ space

documentation/ref-manual/ref-variables.xml recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3" · line 11212

Quoted 8 lines
documentation/ref-manual/ref-variables.xml +8 -0
+            </info>
+            <glossdef>
+                <para>
+                    Determines if <filename>devtmpfs</filename> is used for <filename>/dev</filename> population.
+                    The default value used for <filename>USE_DEVFS</filename>
+                    is "1" when no default value is specifically set.
+                    Typically, you would set <filename>USE_DEVFS</filename>
+                    to "0" if you like to have a statically populated <filename>/dev</filename>

^ hyphenate

documentation/ref-manual/ref-variables.xml recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3" · line 11221

Quoted 9 lines
documentation/ref-manual/ref-variables.xml +6 -0
+                    directory. See: <ulink url='&YOCTO_DOCS_DEV_URL;#selecting-dev-manager'>Development Manual</ulink>
+                    for more information on <filename>/dev</filename> population.
+                </para>
+            </glossdef>
+        </glossentry>
+
         <glossentry id='var-USE_VT'><glossterm><imagedata fileref="figures/define-generic.png" />USE_VT</glossterm>
             <info>
                USE_VT[doc] = "When using SysVinit, determines whether or not to run a getty on any virtual terminals in order to enable logging in through those terminals."

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================