xfs/087: test f2fs selectively

index 5ce3322..2a50378 100644
@@ -2091,6 +2091,16 @@ _link_out_file()
 	fi
 }
 
+_link_out_file_fs()
+{
+	if [ -z "$1" -o -z "$2" ]; then
+		echo Error must pass src and dst.
+		exit
+	fi
+	rm -f $2
+	ln -s $1.$FSTYP $2
+}
+
 _die()
 {
         echo $@

95 lines not on this page · raw message

389 lines not on this page · raw message

583 lines not on this page · raw message

389 lines not on this page · raw message

new file mode 100755
index 0000000..9017bfd
@@ -0,0 +1,174 @@
+#! /bin/bash
+# FS QA Test No. 087
+#
+# * like 086 but want to create more/different kinds of metadata
+#   and so will use fsstress
+# * also can interrupt metadata with godown
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2000-2004 Silicon Graphics, Inc.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+#-----------------------------------------------------------------------
+#
+
+seqfull=$0
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/log
+. ./common/quota
+
+_do_meta()
+{
+    out=$SCRATCH_MNT/fsstress
+    count=10000
+    param="-p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 \
+           -f rename=30 -f stat=30 -f unlink=30 -f truncate=20"
+    _echofull "calling fsstress $param -m8 -n $count"
+    FSSTRESS_ARGS=`_scale_fsstress_args $param $FSSTRESS_AVOID -m 8 -n $count -d $out`
+    if ! $FSSTRESS_PROG $FSSTRESS_ARGS >>$seqres.full 2>&1
+    then
+	_echofull "fsstress failed"
+    fi
+}
+
+# real QA test starts here
+_supported_fs xfs f2fs
+_supported_os IRIX Linux
+
+rm -f $seqres.full $tmp.*
+_require_scratch
+
+if [ "$FSTYP" == "xfs" ]; then
+    _require_v2log
+    _require_xfs_quota
+fi
+
+echo "*** init FS"
+umount $SCRATCH_DEV >/dev/null 2>&1
+
+cat >$tmp.seq.params.xfs <<EOF
+# mkfs-opt             mount-opt
+# ------------------------------
+  version=2            uquota,logbsize=32k
+  version=2,su=4096    uquota,logbsize=32k
+  version=2,su=32768   uquota,logbsize=32k
+  version=2            uquota,logbsize=64k
+  version=2,su=64k     uquota,logbsize=64k
+  version=2            uquota,logbsize=128k
+  version=2,su=128k    uquota,logbsize=128k
+  version=2            uquota,logbsize=256k
+  version=2,su=256k    uquota,logbsize=256k
+EOF
+
+cat >$tmp.seq.params.f2fs <<EOF
+# mkfs-opt  mount-opt
+# ---------------------------
+  test1     active_logs=6,background_gc=off
+  test2     active_logs=6,background_gc=off,inline_data
+  test3     active_logs=6,background_gc=off,inline_dentry
+  test4     active_logs=6,background_gc=off,inline_dentry,inline_data
+  test5     active_logs=6,background_gc=off,disable_roll_forward
+  test6     active_logs=4,background_gc=off
+  test7     active_logs=2,background_gc=off
+EOF
+
+cat $tmp.seq.params.$FSTYP > $tmp.seq.params
+
+# link correct .out file
+_link_out_file_fs $seq.out $seqfull.out
+
+cat $tmp.seq.params \
+| while read mkfs mnt restofline
+do
+    if [ "$mkfs" = "#" ]; then 
+	continue
+    fi
+
+    echo "--- mkfs=$mkfs, mnt=$mnt ---"
+    export MKFS_OPTIONS="-l $mkfs"
+    export MOUNT_OPTIONS="-o $mnt"
+
+    # mkfs the FS
+    _echofull "mkfs"
+    _scratch_mkfs >>$seqres.full 2>&1
+    if [ $? -ne 0 ] ; then 
+	_echofull "mkfs failed: $MKFS_OPTIONS"
+	continue
+    fi
+
+    # mount the FS
+    _echofull "mount"
+    if ! _scratch_mount >>$seqres.full 2>&1; then
+	_echofull "mount failed: $MOUNT_OPTIONS"
+	continue
+    fi
+
+    # create the metadata
+    _do_meta
+
+    # check before on what FS should look like
+    _echofull "ls -RF SCRATCH_MNT"
+    ls -RF $SCRATCH_MNT >$tmp.ls1
+
+    _echofull "godown"
+    src/godown -v -f $SCRATCH_MNT >> $seqres.full
+
+    _echofull "unmount"
+    umount $SCRATCH_DEV >>$seqres.full 2>&1 \
+	|| _fail "umount failed"
+
+    _echofull "logprint after going down..."
+    _print_logstate
+
+    _full "logprint headers"
+    _scratch_xfs_logprint -n >>$seqres.full 2>&1
+
+    _echofull "mount with replay"
+    _scratch_mount >>$seqres.full 2>&1 \
+	|| _fail "mount failed: $MOUNT_OPTIONS"
+
+    # check on what FS looks like after log recovery
+    _echofull "ls -RF SCRATCH_MNT"
+    ls -RF $SCRATCH_MNT >$tmp.ls2
+
+    _echofull "diff ls before and after"
+    diff -us $tmp.ls1 $tmp.ls2 | sed "s#$tmp#TMP#g"
+
+    _echofull "unmount"
+    umount $SCRATCH_MNT
+
+    _echofull "logprint after mount and replay..."
+    _print_logstate
+
+    if _check_scratch_fs; then
+	_echofull "filesystem is checked ok"
+    else
+	_echofull "filesystem is NOT ok"
+    fi
+done
+
+status=0 
+exit

583 lines not on this page · raw message

389 lines not on this page · raw message

index 429f2b4..c6e702d 100644
@@ -6,6 +6,7 @@
 006 auto enospc
 032 mkfs auto quick
 051 acl udf auto quick
+087 log v2log auto quota stress
 272 auto enospc rw
 289 auto quick
 298 auto trim

174 lines not on this page · raw message

583 lines not on this page · raw message

389 lines not on this page · raw message

index 496630d..1e4be94 100644
@@ -76,7 +76,6 @@
 084 ioctl rw auto
 085 log auto quick
 086 log v2log auto
-087 log v2log auto quota stress
 090 rw auto
 092 other auto quick
 094 metadata dir ioctl auto