Skip to contentSkip to conversation

ath3k: Add support of AR3012 bluetooth 13d3:3423 device

PATCH In review Dmitry Tunin 2 participants 2 messages Jan 17, 2015 – Jan 19, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ath3k: Add support of AR3012 bluetooth 13d3:3423 device

Add support of 13d3:3423 device.

T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3423 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms

---
 drivers/bluetooth/ath3k.c | 2 ++
 drivers/bluetooth/btusb.c | 1 +
 2 files changed, 3 insertions(+)
drivers/bluetooth/ath3k.c +2 -0
index 1ee27ac..13a64d0 100644
@@ -108,6 +108,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3393) },
 	{ USB_DEVICE(0x13d3, 0x3402) },
 	{ USB_DEVICE(0x13d3, 0x3408) },
+	{ USB_DEVICE(0x13d3, 0x3423) },
 	{ USB_DEVICE(0x13d3, 0x3432) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
@@ -162,6 +163,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
drivers/bluetooth/btusb.c +1 -0
index 4a6495a..1211c74 100644
@@ -189,6 +189,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
Signature · 1 line
1.9.1
maintainer
#1 lore raw

Hi Dmitry,

Quoted 32 lines

Add support of 13d3:3423 device.

T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3423 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms

Quoted 6 lines

---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +

2 files changed, 3 insertions(+)

patch has been applied to bluetooth-next tree.

Regards

Marcel