Skip to contentSkip to conversation

arm64: dts: Add APM X-Gene standby GPIO controller DTS entries

PATCH New Y Vo 1 participant 1 message Jan 21, 2015

Subsystems (3)
Device tree bindings GPIO Applied micro (apm) x-gene device tree support
lore
Share & tools
lore

Y Vo

author
#0 lore raw

PATCH v3 3/3 arm64: dts: Add APM X-Gene standby GPIO controller DTS entries

Add standby domain gpio controller for APM X-Gene SoC platform.

Signed-off-by Y Vo <[email protected]>
---
 arch/arm64/boot/dts/apm/apm-storm.dtsi |   13 +++++++++++++
 1 files changed, 13 insertions(+), 0 deletions(-)
arch/arm64/boot/dts/apm/apm-storm.dtsi +13 -0
index f1ad9c2..2e1c438 100644
@@ -587,6 +587,19 @@
 			phy-names = "sata-phy";
 		};
 
+		sbgpio: sbgpio at 17001000{
+			compatible = "apm,xgene-gpio-sb";
+			reg = <0x0 0x17001000 0x0 0x400>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupts = 	<0x0 0x28 0x1>,
+					<0x0 0x29 0x1>,
+					<0x0 0x2a 0x1>,
+					<0x0 0x2b 0x1>,
+					<0x0 0x2c 0x1>,
+					<0x0 0x2d 0x1>;
+		};
+
 		rtc: rtc at 10510000 {
 			compatible = "apm,xgene-rtc";
 			reg = <0x0 0x10510000 0x0 0x400>;
Signature · 1 line
1.7.1