net: phy: fix phy device autoneg wrong value

In phy_device_create, autoneg is set to AUTONEG_ENABLE. When using the generic phy driver (phy_device.c), genphy_config_init reads BMSR and finds out if autonegotiation is possible and sets the phy device features accordingly. phy_sanitize_settings is supposed to set the right value of autoneg, but it is never called if autonegotiation is enabled, which is always the case.

---
 drivers/net/phy/phy.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

index 767cd11..9c35136 100644
@@ -249,9 +249,6 @@ static void phy_sanitize_settings(struct phy_device

*phydev)
unsigned int idx;

/* Sanitize settings based on PHY capabilities */
- if ((features & SUPPORTED_Autoneg) == 0)
- phydev->autoneg = AUTONEG_DISABLE;
-
idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex),
features);

@@ -436,6 +433,9 @@ int phy_start_aneg(struct phy_device *phydev)

mutex_lock(&phydev->lock);

+ if ((phydev->supported & SUPPORTED_Autoneg) == 0)
+ phydev->autoneg = AUTONEG_DISABLE;
+
if (AUTONEG_DISABLE == phydev->autoneg)
phy_sanitize_settings(phydev);

2.1.0