Skip to contentSkip to conversation

module: set ksymtab/kcrctab* section addresses to 0x0

PATCH In review Rabin Vincent 3 participants 3 messages Jan 26, 2015 – Jan 27, 2015 Module support

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 module: set ksymtab/kcrctab* section addresses to 0x0

These __ksymtab*/__kcrctab* sections currently have non-zero addresses. Non-zero section addresses in a relocatable ELF confuse GDB and it ends up not relocating all symbols when add-symbol-file is used on modules which have exports. The kernel's module loader does not care about these addresses, so let's just set them to zero.

Before:

  $ readelf -S lib/notifier-error-inject.ko   | grep 'Name\| __ksymtab_gpl'
    [Nr] Name              Type            Addr     Off    Size   ES Flg Lk Inf Al
    [ 8] __ksymtab_gpl     PROGBITS        0000000c 0001b4 000010 00   A  0   0  4

(gdb) add-symbol-file lib/notifier-error-inject.ko 0x500000 -s .bss 0x700000 add symbol table from file "lib/notifier-error-inject.ko" at

     .text_addr = 0x500000
     .bss_addr = 0x700000

(gdb) p &notifier_err_inject_dir
$3 = (struct dentry **) 0x0

After:

  $ readelf -S lib/notifier-error-inject.ko   | grep 'Name\| __ksymtab_gpl'
    [Nr] Name              Type            Addr     Off    Size   ES Flg Lk Inf Al
    [ 8] __ksymtab_gpl     PROGBITS        00000000 0001b4 000010 00   A  0   0  4

(gdb) add-symbol-file lib/notifier-error-inject.ko 0x500000 -s .bss 0x700000 add symbol table from file "lib/notifier-error-inject.ko" at

     .text_addr = 0x500000
     .bss_addr = 0x700000

(gdb) p &notifier_err_inject_dir
$3 = (struct dentry **) 0x700000

---
 scripts/module-common.lds |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
scripts/module-common.lds +10 -10
index 0865b3e..bec15f9 100644
@@ -6,14 +6,14 @@
 SECTIONS {
 	/DISCARD/ : { *(.discard) }
 
-	__ksymtab		: { *(SORT(___ksymtab+*)) }
-	__ksymtab_gpl		: { *(SORT(___ksymtab_gpl+*)) }
-	__ksymtab_unused	: { *(SORT(___ksymtab_unused+*)) }
-	__ksymtab_unused_gpl	: { *(SORT(___ksymtab_unused_gpl+*)) }
-	__ksymtab_gpl_future	: { *(SORT(___ksymtab_gpl_future+*)) }
-	__kcrctab		: { *(SORT(___kcrctab+*)) }
-	__kcrctab_gpl		: { *(SORT(___kcrctab_gpl+*)) }
-	__kcrctab_unused	: { *(SORT(___kcrctab_unused+*)) }
-	__kcrctab_unused_gpl	: { *(SORT(___kcrctab_unused_gpl+*)) }
-	__kcrctab_gpl_future	: { *(SORT(___kcrctab_gpl_future+*)) }
+	__ksymtab		0 : { *(SORT(___ksymtab+*)) }
+	__ksymtab_gpl		0 : { *(SORT(___ksymtab_gpl+*)) }
+	__ksymtab_unused	0 : { *(SORT(___ksymtab_unused+*)) }
+	__ksymtab_unused_gpl	0 : { *(SORT(___ksymtab_unused_gpl+*)) }
+	__ksymtab_gpl_future	0 : { *(SORT(___ksymtab_gpl_future+*)) }
+	__kcrctab		0 : { *(SORT(___kcrctab+*)) }
+	__kcrctab_gpl		0 : { *(SORT(___kcrctab_gpl+*)) }
+	__kcrctab_unused	0 : { *(SORT(___kcrctab_unused+*)) }
+	__kcrctab_unused_gpl	0 : { *(SORT(___kcrctab_unused_gpl+*)) }
+	__kcrctab_gpl_future	0 : { *(SORT(___kcrctab_gpl_future+*)) }
 }
Signature · 1 line
1.7.10.4
#1 lore raw
Quoted 5 lines · Rabin Vincent

These __ksymtab*/__kcrctab* sections currently have non-zero addresses. Non-zero section addresses in a relocatable ELF confuse GDB and it ends up not relocating all symbols when add-symbol-file is used on modules which have exports. The kernel's module loader does not care about these addresses, so let's just set them to zero.

Hi Rabin,

You're right, we don't use sh_addr. This should be safe, I've
applied it for the next merge window.

AFAICT this would have always been a problem; wonder if it should be CC:stable? I don't use gdb on modules so haven't got a good feel for how many people this would be hurting.

Thanks,
Rusty.

Quoted 68 lines

Before:

  $ readelf -S lib/notifier-error-inject.ko   | grep 'Name\| __ksymtab_gpl'
    [Nr] Name              Type            Addr     Off    Size   ES Flg Lk Inf Al
    [ 8] __ksymtab_gpl     PROGBITS        0000000c 0001b4 000010 00   A  0   0  4

(gdb) add-symbol-file lib/notifier-error-inject.ko 0x500000 -s .bss 0x700000 add symbol table from file "lib/notifier-error-inject.ko" at

     .text_addr = 0x500000
     .bss_addr = 0x700000

(gdb) p &notifier_err_inject_dir
$3 = (struct dentry **) 0x0

After:

  $ readelf -S lib/notifier-error-inject.ko   | grep 'Name\| __ksymtab_gpl'
    [Nr] Name              Type            Addr     Off    Size   ES Flg Lk Inf Al
    [ 8] __ksymtab_gpl     PROGBITS        00000000 0001b4 000010 00   A  0   0  4

(gdb) add-symbol-file lib/notifier-error-inject.ko 0x500000 -s .bss 0x700000 add symbol table from file "lib/notifier-error-inject.ko" at

     .text_addr = 0x500000
     .bss_addr = 0x700000

(gdb) p &notifier_err_inject_dir
$3 = (struct dentry **) 0x700000

---
 scripts/module-common.lds |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
scripts/module-common.lds +10 -10
index 0865b3e..bec15f9 100644
@@ -6,14 +6,14 @@
 SECTIONS {
 	/DISCARD/ : { *(.discard) }
 
-	__ksymtab		: { *(SORT(___ksymtab+*)) }
-	__ksymtab_gpl		: { *(SORT(___ksymtab_gpl+*)) }
-	__ksymtab_unused	: { *(SORT(___ksymtab_unused+*)) }
-	__ksymtab_unused_gpl	: { *(SORT(___ksymtab_unused_gpl+*)) }
-	__ksymtab_gpl_future	: { *(SORT(___ksymtab_gpl_future+*)) }
-	__kcrctab		: { *(SORT(___kcrctab+*)) }
-	__kcrctab_gpl		: { *(SORT(___kcrctab_gpl+*)) }
-	__kcrctab_unused	: { *(SORT(___kcrctab_unused+*)) }
-	__kcrctab_unused_gpl	: { *(SORT(___kcrctab_unused_gpl+*)) }
-	__kcrctab_gpl_future	: { *(SORT(___kcrctab_gpl_future+*)) }
+	__ksymtab		0 : { *(SORT(___ksymtab+*)) }
+	__ksymtab_gpl		0 : { *(SORT(___ksymtab_gpl+*)) }
+	__ksymtab_unused	0 : { *(SORT(___ksymtab_unused+*)) }
+	__ksymtab_unused_gpl	0 : { *(SORT(___ksymtab_unused_gpl+*)) }
+	__ksymtab_gpl_future	0 : { *(SORT(___ksymtab_gpl_future+*)) }
+	__kcrctab		0 : { *(SORT(___kcrctab+*)) }
+	__kcrctab_gpl		0 : { *(SORT(___kcrctab_gpl+*)) }
+	__kcrctab_unused	0 : { *(SORT(___kcrctab_unused+*)) }
+	__kcrctab_unused_gpl	0 : { *(SORT(___kcrctab_unused_gpl+*)) }
+	__kcrctab_gpl_future	0 : { *(SORT(___kcrctab_gpl_future+*)) }
 }
Signature · 7 lines
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
#2 lore raw
Quoted 9 lines · Rusty Russell
Quoted 5 lines · Rabin Vincent

These __ksymtab*/__kcrctab* sections currently have non-zero addresses. Non-zero section addresses in a relocatable ELF confuse GDB and it ends up not relocating all symbols when add-symbol-file is used on modules which have exports. The kernel's module loader does not care about these addresses, so let's just set them to zero.

You're right, we don't use sh_addr. This should be safe, I've
applied it for the next merge window.

Thanks.

Quoted 3 lines

AFAICT this would have always been a problem; wonder if it should be CC:stable? I don't use gdb on modules so haven't got a good feel for how many people this would be hurting.

I've no opinion on -stable. This method of debugging kernel modules is described in for example LDD3, so it would be nice if it worked in all cases, but I guess most people won't be affected even if they use it since it only affects modules with exported symbols.