Skip to contentSkip to conversation

arm: dts: qcom: Add LCC nodes

PATCH New Stephen Boyd 1 participant 1 message Jan 28, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm: dts: qcom: Add LCC nodes

From: Kumar Gala <[email protected]>

Add the node for the LPASS clock controller found on a few qcom SoCs so that the clock driver can probe.

[sboyd at codeaurora.org: Added apq8064 and msm8960 nodes]
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 7 +++++++
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 ++++++++
 arch/arm/boot/dts/qcom-msm8960.dtsi | 7 +++++++
 3 files changed, 22 insertions(+)
arch/arm/boot/dts/qcom-apq8064.dtsi +7 -0
index b3154c071652..7705752c212c 100644
@@ -239,6 +239,13 @@
 			#reset-cells = <1>;
 		};
 
+		lcc: clock-controller at 28000000 {
+			compatible = "qcom,lcc-apq8064";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		mmcc: clock-controller at 4000000 {
 			compatible = "qcom,mmcc-apq8064";
 			reg = <0x4000000 0x1000>;
arch/arm/boot/dts/qcom-ipq8064.dtsi +8 -0
index cb225dafe97c..568260c387bb 100644
@@ -279,5 +279,13 @@
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
+
+		lcc: clock-controller at 28000000 {
+			compatible = "qcom,lcc-ipq8064";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 	};
 };
arch/arm/boot/dts/qcom-msm8960.dtsi +7 -0
index e1b0d5cd9e3c..41ac308d4d68 100644
@@ -91,6 +91,13 @@
 			reg = <0x900000 0x4000>;
 		};
 
+		lcc: clock-controller at 28000000 {
+			compatible = "qcom,lcc-msm8960";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		clock-controller at 4000000 {
 			compatible = "qcom,mmcc-msm8960";
 			reg = <0x4000000 0x1000>;
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project