ARC: more improvements
cover ARC: more improvements
This series is focused on following items:
* Move more config options to Kconfig
- Cache settings
- Endianess
- Monitor base
* Clean-up of board configuration headers
* Build libgcc in U-Boot for portability
Alexey Brodkin (11):
arc: remove CPU hard-coded selection from board description in
include/configs
arc: add more flavours of ARC700 series CPU
arc: define and use PTAG AUX regs for MMUv3 only
arc: select cache settings via menuconfig
arc: add selection of endianess in Kconfig
arc: hard-code CONFIG_SYS_GENERIC_BOARD into asm/config.h
arc: get rid of useless CONFIG_SKIP_LOWLEVEL_INIT
arc: hard-code CONFIG_ARCH_EARLY_INIT_R in asm/config.h
arc: move SYS_MONITOR_BASE setup in Konfig
arc: move CPU flags selection to the main "config.mk"
arc: build libgcc in U-Boot
Igor Guryanov (1):
arc: memcmp - fix zero-delay loop utilization
Kconfig | 2 +- arch/Kconfig | 1 + arch/arc/Kconfig | 71 ++++++++++++- arch/arc/config.mk | 15 ++- arch/arc/cpu/arcv1/config.mk | 7 -- arch/arc/include/asm/arcregs.h | 6 +- arch/arc/include/asm/cache.h | 19 ++-- arch/arc/include/asm/config.h | 2 + arch/arc/lib/Makefile | 2 + arch/arc/lib/_millicodethunk.S | 226 +++++++++++++++++++++++++++++++++++++++++ arch/arc/lib/cache.c | 7 +- arch/arc/lib/libgcc2.c | 161 +++++++++++++++++++++++++++++ arch/arc/lib/libgcc2.h | 132 ++++++++++++++++++++++++ arch/arc/lib/memcmp.S | 2 + board/synopsys/Kconfig | 10 -- board/synopsys/MAINTAINERS | 1 - configs/arcangel4-be_defconfig | 4 +- configs/arcangel4_defconfig | 1 + configs/axs101_defconfig | 5 +- configs/tb100_defconfig | 4 +- include/configs/arcangel4-be.h | 91 ----------------- include/configs/arcangel4.h | 12 --- include/configs/axs101.h | 15 --- include/configs/tb100.h | 10 -- 24 files changed, 639 insertions(+), 167 deletions(-) delete mode 100644 arch/arc/cpu/arcv1/config.mk create mode 100644 arch/arc/lib/_millicodethunk.S create mode 100644 arch/arc/lib/libgcc2.c create mode 100644 arch/arc/lib/libgcc2.h delete mode 100644 include/configs/arcangel4-be.h
Signature · 1 line
2.1.0
PATCH 1/12 arc: memcmp - fix zero-delay loop utilization
From: Igor Guryanov <[email protected]>
It's prohibited to put branch instruction in the very end of zero-delay loop. On execution this causes "Illegal instruction" exception.
--- arch/arc/lib/memcmp.S | 2 ++ 1 file changed, 2 insertions(+)
arch/arc/lib/memcmp.S +2 -0
@@ -29,6 +29,7 @@ memcmp: ld.a %r4, [%r0, 8] ld.a %r5, [%r1, 8] brne WORD2, %r12, .Lodd + nop .Loop_end: asl_s SHIFT, SHIFT, 3 bhs_s .Last_cmp
@@ -105,6 +106,7 @@ memcmp: ldb.a %r4, [%r0, 2] ldb.a %r5, [%r1, 2] brne %r3, %r12, .Lbyte_odd + nop .Lbyte_end: bcc .Lbyte_even brne %r4, %r5, .Lbyte_even
Signature · 1 line
2.1.0
PATCH 2/12 arc: remove CPU hard-coded selection from board description in include/configs
In reply to Alexey BrodkinWith switch to Kconfig we only need very board-specific descriptions in include/configs.
CPU selection is performed with either defconfig or manually via menuconfig.
--- include/configs/arcangel4-be.h | 1 - include/configs/arcangel4.h | 1 - include/configs/axs101.h | 1 - include/configs/tb100.h | 1 - 4 files changed, 4 deletions(-)
include/configs/arcangel4-be.h +0 -1
@@ -11,7 +11,6 @@* CPU configuration */ #define CONFIG_SYS_BIG_ENDIAN -#define CONFIG_ARC700 #define CONFIG_ARC_MMU_VER 3#define CONFIG_SYS_CACHELINE_SIZE 64#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ
include/configs/arcangel4.h +0 -1
@@ -10,7 +10,6 @@/* * CPU configuration */ -#define CONFIG_ARC700 #define CONFIG_ARC_MMU_VER 3#define CONFIG_SYS_CACHELINE_SIZE 64#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ
include/configs/axs101.h +0 -1
@@ -10,7 +10,6 @@/* * CPU configuration */ -#define CONFIG_ARC700 #define CONFIG_ARC_MMU_VER 3#define CONFIG_SYS_CACHELINE_SIZE 32#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ
include/configs/tb100.h +0 -1
@@ -12,7 +12,6 @@/* * CPU configuration */ -#define CONFIG_ARC700 #define CONFIG_ARC_MMU_VER 3#define CONFIG_SYS_CACHELINE_SIZE 32#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ
Signature · 1 line
2.1.0
PATCH 3/12 arc: add more flavours of ARC700 series CPU
In reply to Alexey BrodkinNow we may select a particular version of ARC700:
* ARC750D or
* ARC770D
It allows more flexible (or more fine tuned) configuration of U-Boot. Before that change we relied on minimal configuration but now we may use specific features of each CPU.
Moreover allows us to escape manual selection of options that exist in both CPUs but may have say different version like MMUv2 in ARC750D vs MMUv3 in ARC770D.
--- arch/arc/Kconfig | 40 ++++++++++++++++++++++++++++++++++++++++ arch/arc/config.mk | 4 ++++ arch/arc/include/asm/arcregs.h | 2 ++ arch/arc/include/asm/cache.h | 6 ++++++ include/configs/arcangel4-be.h | 1 - include/configs/arcangel4.h | 1 - include/configs/axs101.h | 1 - include/configs/tb100.h | 1 - 8 files changed, 52 insertions(+), 4 deletions(-)
arch/arc/Kconfig +40 -0
@@ -8,6 +8,46 @@ config SYS_CPU default "arcv1" choice + prompt "CPU selection" + default CPU_ARC770D + +config CPU_ARC750D + bool "ARC 750D" + select ARC_MMU_V2 + help + Choose this option to build an U-Boot for ARC750D CPU. + +config CPU_ARC770D + bool "ARC 770D" + select ARC_MMU_V3 + help + Choose this option to build an U-Boot for ARC770D CPU. + +endchoice + +choice + prompt "MMU Version" + default ARC_MMU_V3 if CPU_ARC770D + default ARC_MMU_V2 if CPU_ARC750D + +config ARC_MMU_V2 + bool "MMU v2" + depends on CPU_ARC750D + help + Fixed the deficiency of v1 - possible thrashing in memcpy sceanrio + when 2 D-TLB and 1 I-TLB entries index into same 2way set. + +config ARC_MMU_V3 + bool "MMU v3" + depends on CPU_ARC770D + help + Introduced with ARC700 4.10: New Features + Variable Page size (1k-16k), var JTLB size 128 x (2 or 4) + Shared Address Spaces (SASID) + +endchoice + +choice prompt "Target select" config TARGET_TB100
arch/arc/config.mk +4 -0
@@ -25,6 +25,10 @@ ifdef CONFIG_ARC_MMU_VER CONFIG_MMU = 1 endif +ifdef CONFIG_CPU_ARC770D +PLATFORM_CPPFLAGS += -mlock -mswape +endif + PLATFORM_CPPFLAGS += -ffixed-r25 -D__ARC__ -gdwarf-2 # Needed for relocation
arch/arc/include/asm/arcregs.h +2 -0
@@ -7,6 +7,8 @@#ifndef _ASM_ARC_ARCREGS_H#define _ASM_ARC_ARCREGS_H +#include <asm/cache.h> +/* * ARC architecture has additional address space - auxiliary registers. * These registers are mostly used for configuration purposes.
arch/arc/include/asm/cache.h +6 -0
@@ -20,4 +20,10 @@#define ARCH_DMA_MINALIGN 128#endif +#if defined(CONFIG_ARC_MMU_V2 ) +#define CONFIG_ARC_MMU_VER 2 +#elif defined(CONFIG_ARC_MMU_V3 ) +#define CONFIG_ARC_MMU_VER 3 +#endif +#endif /* __ASM_ARC_CACHE_H */
include/configs/arcangel4-be.h +0 -1
@@ -11,7 +11,6 @@* CPU configuration */ #define CONFIG_SYS_BIG_ENDIAN -#define CONFIG_ARC_MMU_VER 3#define CONFIG_SYS_CACHELINE_SIZE 64#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ
include/configs/arcangel4.h +0 -1
@@ -10,7 +10,6 @@/* * CPU configuration */ -#define CONFIG_ARC_MMU_VER 3#define CONFIG_SYS_CACHELINE_SIZE 64#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ
include/configs/axs101.h +0 -1
@@ -10,7 +10,6 @@/* * CPU configuration */ -#define CONFIG_ARC_MMU_VER 3#define CONFIG_SYS_CACHELINE_SIZE 32#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ
include/configs/tb100.h +0 -1
@@ -12,7 +12,6 @@/* * CPU configuration */ -#define CONFIG_ARC_MMU_VER 3#define CONFIG_SYS_CACHELINE_SIZE 32#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ
Signature · 1 line
2.1.0
PATCH 4/12 arc: define and use PTAG AUX regs for MMUv3 only
In reply to Alexey BrodkinDC_PTAG and IC_PTAG registers only exist in MMUv3.
--- arch/arc/include/asm/arcregs.h | 4 ++-- arch/arc/lib/cache.c | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-)
arch/arc/include/asm/arcregs.h +2 -2
@@ -23,7 +23,7 @@#define ARC_AUX_IC_IVIC 0x10#define ARC_AUX_IC_CTRL 0x11#define ARC_AUX_IC_IVIL 0x19 -#if (CONFIG_ARC_MMU_VER >2 ) +#if (CONFIG_ARC_MMU_VER ==3 )#define ARC_AUX_IC_PTAG 0x1E#endif #define ARC_BCR_IC_BUILD 0x77
@@ -42,7 +42,7 @@#define ARC_AUX_DC_IVDL 0x4A#define ARC_AUX_DC_FLSH 0x4B#define ARC_AUX_DC_FLDL 0x4C -#if (CONFIG_ARC_MMU_VER >2 ) +#if (CONFIG_ARC_MMU_VER ==3 )#define ARC_AUX_DC_PTAG 0x5C#endif #define ARC_BCR_DC_BUILD 0x72
arch/arc/lib/cache.c +3 -3
@@ -101,7 +101,7 @@ void flush_dcache_all(void)#ifndef CONFIG_SYS_DCACHE_OFF static void dcache_flush_line (unsigned addr) { -#if (CONFIG_ARC_MMU_VER >2 ) +#if (CONFIG_ARC_MMU_VER ==3 )write_aux_reg (ARC_AUX_DC_PTAG , addr);#endif write_aux_reg (ARC_AUX_DC_FLDL , addr);
@@ -115,7 +115,7 @@ static void dcache_flush_line(unsigned addr)* Invalidate I$ for addresses range just flushed from D$. * If we try to execute data flushed above it will be valid/correct */ -#if (CONFIG_ARC_MMU_VER >2 ) +#if (CONFIG_ARC_MMU_VER ==3 )write_aux_reg (ARC_AUX_IC_PTAG , addr);#endif write_aux_reg (ARC_AUX_IC_IVIL , addr);
@@ -145,7 +145,7 @@ void invalidate_dcache_range(unsigned long start, unsigned long end) end = end & (~(CONFIG_SYS_CACHELINE_SIZE -1 ));for (addr = start; addr <= end; addr +=CONFIG_SYS_CACHELINE_SIZE ) { -#if (CONFIG_ARC_MMU_VER >2 ) +#if (CONFIG_ARC_MMU_VER ==3 )write_aux_reg (ARC_AUX_DC_PTAG , addr);#endif write_aux_reg (ARC_AUX_DC_IVDL , addr);
Signature · 1 line
2.1.0
PATCH 5/12 arc: select cache settings via menuconfig
In reply to Alexey BrodkinThis change allows to keep board description clean and minimalistic. This is especially helpful if one board may house different CPUs with different features.
It is applicable to both FPGA-based boards or those that have CPUs mounted on interchnagable daughter-boards.
--- arch/arc/Kconfig | 19 +++++++++++++++++++ arch/arc/include/asm/cache.h | 13 +++++-------- arch/arc/lib/cache.c | 1 + configs/axs101_defconfig | 4 +++- configs/tb100_defconfig | 3 ++- include/configs/arcangel4-be.h | 1 - include/configs/arcangel4.h | 1 - include/configs/axs101.h | 4 ---- include/configs/tb100.h | 1 - 9 files changed, 30 insertions(+), 17 deletions(-)
arch/arc/Kconfig +19 -0
@@ -47,6 +47,25 @@ config ARC_MMU_V3 endchoice +config SYS_ICACHE_OFF + bool "Do not use Instruction Cache" + default n + +config SYS_DCACHE_OFF + bool "Do not use Data Cache" + default n + +config ARC_CACHE_LINE_SHIFT + int "Cache Line Length (as power of 2)" + range 5 7 + default "6" + depends on !SYS_DCACHE_OFF || !SYS_DCACHE_OFF + help + Starting with ARC700 4.9, Cache line length is configurable, + This option specifies "N", with Line-len = 2 power N + So line lengths of 32, 64, 128 are specified by 5,6,7, respectively + Linux only supports same line lengths for I and D caches. + choice prompt "Target select"
arch/arc/include/asm/cache.h +5 -8
@@ -9,15 +9,12 @@#include <config.h> -/* -* The current upper bound for ARC L1 data cache line sizes is 128 bytes. -* We use that value for aligning DMA buffers unless the board config has -* specified an alternate cache line size. -*/ -#ifdef CONFIG_SYS_CACHELINE_SIZE -#define ARCH_DMA_MINALIGN CONFIG_SYS_CACHELINE_SIZE +#ifdef CONFIG_ARC_CACHE_LINE_SHIFT +#define CONFIG_SYS_CACHELINE_SIZE (1 << CONFIG_ARC_CACHE_LINE_SHIFT) +#define ARCH_DMA_MINALIGN CONFIG_SYS_CACHELINE_SIZE#else -#define ARCH_DMA_MINALIGN 128 +/* Satisfy users of ARCH_DMA_MINALIGN */ +#define ARCH_DMA_MINALIGN 128#endif #if defined(CONFIG_ARC_MMU_V2 )
arch/arc/lib/cache.c +1 -0
@@ -6,6 +6,7 @@#include <config.h> #include <asm/arcregs.h> +#include <asm/cache.h> /* Bit values in IC_CTRL */ #define IC_CTRL_CACHE_DISABLE (1 << 0)
configs/axs101_defconfig +3 -1
@@ -1,3 +1,5 @@ CONFIG_ARC=y CONFIG_TARGET_AXS101=y -CONFIG_SYS_CLK_FREQ=750000000 +CONFIG_SYS_CLK_FREQ=750000000 +CONFIG_ARC_CACHE_LINE_SHIFT=5 +CONFIG_SYS_DCACHE_OFF=y
configs/tb100_defconfig +2 -1
@@ -1,3 +1,4 @@ CONFIG_ARC=y CONFIG_TARGET_TB100=y -CONFIG_SYS_CLK_FREQ=500000000 +CONFIG_SYS_CLK_FREQ=500000000 +CONFIG_ARC_CACHE_LINE_SHIFT=5
include/configs/arcangel4-be.h +0 -1
@@ -11,7 +11,6 @@* CPU configuration */ #define CONFIG_SYS_BIG_ENDIAN -#define CONFIG_SYS_CACHELINE_SIZE 64#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ/*
include/configs/arcangel4.h +0 -1
@@ -10,7 +10,6 @@/* * CPU configuration */ -#define CONFIG_SYS_CACHELINE_SIZE 64#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ/*
include/configs/axs101.h +0 -4
@@ -10,12 +10,8 @@/* * CPU configuration */ -#define CONFIG_SYS_CACHELINE_SIZE 32#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ -/* NAND controller DMA doesn't work correctly with D$ enabled */ -#define CONFIG_SYS_DCACHE_OFF -/* * Board configuration */
include/configs/tb100.h +0 -1
@@ -12,7 +12,6 @@/* * CPU configuration */ -#define CONFIG_SYS_CACHELINE_SIZE 32#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ/*
Signature · 1 line
2.1.0
PATCH 6/12 arc: add selection of endianess in Kconfig
In reply to Alexey BrodkinThis change allows to keep board description clean and minimalistic. This is especially helpful if one board may house different CPUs with different features.
It is applicable to both FPGA-based boards or those that have CPUs mounted on interchnagable daughter-boards.
--- arch/arc/Kconfig | 9 +++-- arch/arc/config.mk | 4 +- board/synopsys/Kconfig | 10 ----- board/synopsys/MAINTAINERS | 1 - configs/arcangel4-be_defconfig | 3 +- include/configs/arcangel4-be.h | 88 ------------------------------------------ 6 files changed, 11 insertions(+), 104 deletions(-) delete mode 100644 include/configs/arcangel4-be.h
arch/arc/Kconfig +6 -3
@@ -47,6 +47,12 @@ config ARC_MMU_V3 endchoice +config CPU_BIG_ENDIAN + bool "Enable Big Endian Mode" + default n + help + Build kernel for Big Endian Mode of ARC CPU + config SYS_ICACHE_OFF bool "Do not use Instruction Cache" default n
@@ -75,9 +81,6 @@ config TARGET_TB100 config TARGET_ARCANGEL4 bool "Support arcangel4" -config TARGET_ARCANGEL4_BE - bool "Support arcangel4-be" - config TARGET_AXS101 bool "Support axs101"
arch/arc/config.mk +3 -1
@@ -4,8 +4,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifndef CONFIG_SYS_BIG_ENDIAN +ifndef CONFIG_CPU_BIG_ENDIAN CONFIG_SYS_LITTLE_ENDIAN = 1 +else +CONFIG_SYS_BIG_ENDIAN = 1 endif ifdef CONFIG_SYS_LITTLE_ENDIAN
board/synopsys/Kconfig +0 -10
@@ -7,13 +7,3 @@ config SYS_CONFIG_NAME default "arcangel4" endif - -if TARGET_ARCANGEL4_BE - -config SYS_VENDOR - default "synopsys" - -config SYS_CONFIG_NAME - default "arcangel4-be" - -endif
board/synopsys/MAINTAINERS +0 -1
@@ -3,5 +3,4 @@ M: Alexey Brodkin <[email protected]> S: Maintained F: include/configs/arcangel4.h F: configs/arcangel4_defconfig -F: include/configs/arcangel4-be.h F: configs/arcangel4-be_defconfig
configs/arcangel4-be_defconfig +2 -1
@@ -1,3 +1,4 @@ CONFIG_ARC=y -CONFIG_TARGET_ARCANGEL4_BE=y +CONFIG_TARGET_ARCANGEL4=y CONFIG_SYS_CLK_FREQ=70000000 +CONFIG_CPU_BIG_ENDIAN=y
include/configs/arcangel4-be.h deleted +0 -88
88 lines not on this page · raw message
Signature · 1 line
2.1.0
PATCH 7/12 arc: hard-code CONFIG_SYS_GENERIC_BOARD into asm/config.h
In reply to Alexey BrodkinThere're no other options for ARC except "generic board" so ther's no point to define CONFIG_SYS_GENERIC_BOARD per board.
We now have it set fo all ARC boards.
--- arch/arc/include/asm/config.h | 1 + include/configs/arcangel4.h | 1 - include/configs/axs101.h | 1 - include/configs/tb100.h | 1 - 4 files changed, 1 insertion(+), 3 deletions(-)
arch/arc/include/asm/config.h +1 -0
@@ -7,6 +7,7 @@#ifndef __ASM_ARC_CONFIG_H_#define __ASM_ARC_CONFIG_H_ +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_GENERIC_GLOBAL_DATA #define CONFIG_SYS_BOOT_RAMDISK_HIGH
include/configs/arcangel4.h +0 -1
@@ -15,7 +15,6 @@/* * Board configuration */ -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is in RAM already */ #define CONFIG_ARCH_EARLY_INIT_R
include/configs/axs101.h +0 -1
@@ -15,7 +15,6 @@/* * Board configuration */ -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is in RAM already */ #define CONFIG_ARCH_EARLY_INIT_R
include/configs/tb100.h +0 -1
@@ -17,7 +17,6 @@/* * Board configuration */ -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_ARCH_EARLY_INIT_R /*
Signature · 1 line
2.1.0
PATCH 8/12 arc: get rid of useless CONFIG_SKIP_LOWLEVEL_INIT
In reply to Alexey BrodkinCurrently there's nothing related to really low-level init on ARC so CONFIG_SKIP_LOWLEVEL_INIT definition makes no sense.
--- include/configs/arcangel4.h | 2 -- include/configs/axs101.h | 2 -- 2 files changed, 4 deletions(-)
include/configs/arcangel4.h +0 -2
@@ -15,8 +15,6 @@/* * Board configuration */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is in RAM already */ -#define CONFIG_ARCH_EARLY_INIT_R /*
include/configs/axs101.h +0 -2
@@ -15,8 +15,6 @@/* * Board configuration */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is in RAM already */ -#define CONFIG_ARCH_EARLY_INIT_R #define ARC_FPGA_PERIPHERAL_BASE 0xE0000000
Signature · 1 line
2.1.0
PATCH 9/12 arc: hard-code CONFIG_ARCH_EARLY_INIT_R in asm/config.h
In reply to Alexey BrodkinCommon arch_early_init_r() is used in "arc/lib/cpu.c" for all ARC boards so there's no sense in separate per-board definitions.
--- arch/arc/include/asm/config.h | 1 + include/configs/arcangel4.h | 5 ----- include/configs/axs101.h | 5 ----- include/configs/tb100.h | 5 ----- 4 files changed, 1 insertion(+), 15 deletions(-)
arch/arc/include/asm/config.h +1 -0
@@ -10,6 +10,7 @@#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_GENERIC_GLOBAL_DATA #define CONFIG_SYS_BOOT_RAMDISK_HIGH +#define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_LMB
include/configs/arcangel4.h +0 -5
@@ -13,11 +13,6 @@#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ/* -* Board configuration -*/ -#define CONFIG_ARCH_EARLY_INIT_R - -/* * Memory configuration */ #define CONFIG_SYS_TEXT_BASE 0x81000000
include/configs/axs101.h +0 -5
@@ -12,11 +12,6 @@*/ #define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ -/* -* Board configuration -*/ -#define CONFIG_ARCH_EARLY_INIT_R -#define ARC_FPGA_PERIPHERAL_BASE 0xE0000000#define ARC_APB_PERIPHERAL_BASE 0xF0000000#define ARC_DWMMC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x15000)
include/configs/tb100.h +0 -5
@@ -15,11 +15,6 @@#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ/* -* Board configuration -*/ -#define CONFIG_ARCH_EARLY_INIT_R - -/* * Memory configuration */ #define CONFIG_SYS_TEXT_BASE 0x84000000
Signature · 1 line
2.1.0
PATCH 10/12 arc: move SYS_MONITOR_BASE setup in Konfig
In reply to Alexey BrodkinFollowing SPARK ARC now has SYS_MONITOR_BASE setup via Kconfig. This makes "include/configs/*.h" cleaner and more flexible.
--- Kconfig | 2 +- configs/arcangel4-be_defconfig | 1 + configs/arcangel4_defconfig | 1 + configs/axs101_defconfig | 3 ++- configs/tb100_defconfig | 1 + include/configs/arcangel4.h | 1 - include/configs/axs101.h | 1 - include/configs/tb100.h | 1 - 8 files changed, 6 insertions(+), 5 deletions(-)
Kconfig +1 -1
@@ -138,7 +138,7 @@ config SYS_EXTRA_OPTIONS new boards should not use this option. config SYS_TEXT_BASE - depends on SPARC + depends on SPARC || ARC hex "Text Base" help TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture
configs/arcangel4-be_defconfig +1 -0
@@ -2,3 +2,4 @@ CONFIG_ARC=y CONFIG_TARGET_ARCANGEL4=y CONFIG_SYS_CLK_FREQ=70000000 CONFIG_CPU_BIG_ENDIAN=y +CONFIG_SYS_TEXT_BASE=0x81000000
configs/arcangel4_defconfig +1 -0
@@ -1,3 +1,4 @@ CONFIG_ARC=y CONFIG_TARGET_ARCANGEL4=y CONFIG_SYS_CLK_FREQ=70000000 +CONFIG_SYS_TEXT_BASE=0x81000000
configs/axs101_defconfig +2 -1
@@ -2,4 +2,5 @@ CONFIG_ARC=y CONFIG_TARGET_AXS101=y CONFIG_SYS_CLK_FREQ=750000000 CONFIG_ARC_CACHE_LINE_SHIFT=5 -CONFIG_SYS_DCACHE_OFF=y +CONFIG_SYS_DCACHE_OFF=y +CONFIG_SYS_TEXT_BASE=0x81000000
configs/tb100_defconfig +1 -0
@@ -2,3 +2,4 @@ CONFIG_ARC=y CONFIG_TARGET_TB100=y CONFIG_SYS_CLK_FREQ=500000000 CONFIG_ARC_CACHE_LINE_SHIFT=5 +CONFIG_SYS_TEXT_BASE=0x84000000
include/configs/arcangel4.h +0 -1
@@ -15,7 +15,6 @@/* * Memory configuration */ -#define CONFIG_SYS_TEXT_BASE 0x81000000#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
include/configs/axs101.h +0 -1
@@ -20,7 +20,6 @@/* * Memory configuration */ -#define CONFIG_SYS_TEXT_BASE 0x81000000#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
include/configs/tb100.h +0 -1
@@ -17,7 +17,6 @@/* * Memory configuration */ -#define CONFIG_SYS_TEXT_BASE 0x84000000#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
Signature · 1 line
2.1.0
PATCH 11/12 arc: move CPU flags selection to the main "config.mk"
In reply to Alexey BrodkinAs a preparation to ARCv2 port submission we're moving CPU slection flags to a common location.
Also it will allow us to have more flexible CPU specification, not only ISA version but CPU family as well checking CONFIG_ARC_CPU_xxx.
--- arch/arc/config.mk | 6 +++++- arch/arc/cpu/arcv1/config.mk | 7 ------- 2 files changed, 5 insertions(+), 8 deletions(-) delete mode 100644 arch/arc/cpu/arcv1/config.mk
arch/arc/config.mk +5 -1
@@ -27,8 +27,12 @@ ifdef CONFIG_ARC_MMU_VER CONFIG_MMU = 1 endif +ifdef CONFIG_CPU_ARC750D +PLATFORM_CPPFLAGS += -marc700 +endif + ifdef CONFIG_CPU_ARC770D -PLATFORM_CPPFLAGS += -mlock -mswape +PLATFORM_CPPFLAGS += -marc700 -mlock -mswape endif PLATFORM_CPPFLAGS += -ffixed-r25 -D__ARC__ -gdwarf-2
arch/arc/cpu/arcv1/config.mk deleted +0 -7
@@ -1,7 +0,0 @@ -# -# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -mA7
Signature · 1 line
2.1.0
PATCH 12/12 arc: build libgcc in U-Boot
In reply to Alexey BrodkinThis way we may have very limited set of functions implemented so we save some space.
Also it allows us to build U-Boot for any ARC core with the same one toolchain because we don't rely on pre-built libgcc.
For example:
* we may use little-endian toolchain but build U-Boot for ether
endianess
* we may use non-multilibbed uClibc toolchain but build U-Boot for
whatever ARC CPU flavour that current GCC supports
Private libgcc built from generic C implementation contributes only 144 bytes to .text section so we don't see significant degradation of size:
--->8---
$ arc-linux-size u-boot.libgcc-prebuilt text data bss dec hex filename 222217 24912 214820 461949 70c7d u-boot.libgcc-prebuilt
$ arc-linux-size u-boot.libgcc-private text data bss dec hex filename 222361 24912 214820 462093 70d0d u-boot.libgcc-private --->8---
Also I don't notice visible performance degradation compared to pre-built libgcc (where at least "*div*" functions are had-written in assembly) on typical operations of downloading 10Mb uImage over TFTP and bootm.
--- arch/Kconfig | 1 + arch/arc/Kconfig | 3 + arch/arc/config.mk | 3 + arch/arc/lib/Makefile | 2 + arch/arc/lib/_millicodethunk.S | 226 +++++++++++++++++++++++++++++++++++++++++ arch/arc/lib/libgcc2.c | 161 +++++++++++++++++++++++++++++ arch/arc/lib/libgcc2.h | 132 ++++++++++++++++++++++++ 7 files changed, 528 insertions(+) create mode 100644 arch/arc/lib/_millicodethunk.S create mode 100644 arch/arc/lib/libgcc2.c create mode 100644 arch/arc/lib/libgcc2.h
arch/Kconfig +1 -0
@@ -4,6 +4,7 @@ choice config ARC bool "ARC architecture" + select HAVE_PRIVATE_LIBGCC config ARM bool "ARM architecture"
arch/arc/Kconfig +3 -0
@@ -4,6 +4,9 @@ menu "ARC architecture" config SYS_ARCH default "arc" +config USE_PRIVATE_LIBGCC + default y + config SYS_CPU default "arcv1"
arch/arc/config.mk +3 -0
@@ -12,11 +12,14 @@ endif ifdef CONFIG_SYS_LITTLE_ENDIAN ARC_CROSS_COMPILE := arc-buildroot-linux-uclibc- +PLATFORM_LDFLAGS += -EL +PLATFORM_CPPFLAGS += -mlittle-endian endif ifdef CONFIG_SYS_BIG_ENDIAN ARC_CROSS_COMPILE := arceb-buildroot-linux-uclibc- PLATFORM_LDFLAGS += -EB +PLATFORM_CPPFLAGS += -mbig-endian endif ifeq ($(CROSS_COMPILE),)
arch/arc/lib/Makefile +2 -0
@@ -20,3 +20,5 @@ obj-y += reset.o obj-y += timer.o obj-$(CONFIG_CMD_BOOTM) += bootm.o + +lib-$(CONFIG_USE_PRIVATE_LIBGCC) += _millicodethunk.o libgcc2.o
arch/arc/lib/_millicodethunk.S new file +226 -0
226 lines not on this page · raw message
arch/arc/lib/libgcc2.c new file +161 -0
161 lines not on this page · raw message
arch/arc/lib/libgcc2.h new file +132 -0
132 lines not on this page · raw message
Signature · 1 line
2.1.0