x86, alternatives: Instruction padding and more robust JMPs
Subsystems (2)
Borislav Petkov
maintainercover x86, alternatives: Instruction padding and more robust JMPs
From: Borislav Petkov <[email protected]>
[ Changelog is in version-increasing number so that one can follow the
evolution of the patch set in a more natural way (i.e., latest version comes at the end. ]
v0:
this is something which hpa and I talked about recently: the ability for the alternatives code to add padding to the original instruction in case the replacement is longer and also to be able to simply write "jmp" and not care about which JMP exactly the compiler generates and whether the relative offsets are correct.
So this is a stab at it, it seems to boot in kvm here but it needs more staring to make sure we're actually generating the proper code at all times.
Thus the RFC tag, comments/suggestions are welcome.
v1:
This is the first version which passes testing on AMD/Intel, 32/64-bit boxes I have here. For more info what it does, you can boot with "debug-alternative" to see some verbose information about what gets changed into what.
Patches 1 and 2 are cleanups.
Patch 3 is adding the padding at build time and patch 4 simplifies using JMPs in alternatives without having to do crazy math with labels, as a user of the alternatives facilities.
Patch 5 optimizes the single-byte NOPs we're adding at build time to longer NOPs which should go easier through the frontend.
Patches 6-12 then convert most of the alternative callsites to the generic macros and kill the homegrown fun.
As always, constructive comments/suggestions are welcome.
Borislav Petkov (12):
x86, copy_user: Remove FIX_ALIGNMENT define x86, alternatives: Cleanup DPRINTK macro
x86, alternatives: Add instruction padding x86, alternatives: Make JMPs more robust
x86, alternatives: Use optimized NOPs for padding x86, copy_page_64.S: Use generic ALTERNATIVE macro x86, copy_user_64.S: Convert to ALTERNATIVE_2 x86, SMAP: Use ALTERNATIVE macro
x86, alternative: Convert X86_INVD_BUG to generic macro x86, alternatives: Convert clear_page_64.S x86, alternative: Use alternative_2 in rdtsc_barrier x86, alternative: Cleanup prefetch primitives
arch/x86/include/asm/alternative-asm.h | 40 ++++++++ arch/x86/include/asm/alternative.h | 58 +++++++----- arch/x86/include/asm/apic.h | 2 +- arch/x86/include/asm/barrier.h | 6 +- arch/x86/include/asm/cpufeature.h | 23 ++--- arch/x86/include/asm/processor.h | 16 ++-- arch/x86/include/asm/smap.h | 30 ++---- arch/x86/kernel/alternative.c | 164 ++++++++++++++++++++++++++++----- arch/x86/kernel/cpu/amd.c | 5 + arch/x86/kernel/entry_32.S | 12 +-- arch/x86/lib/clear_page_64.S | 66 ++++++------- arch/x86/lib/copy_page_64.S | 37 +++----- arch/x86/lib/copy_user_64.S | 46 ++------- arch/x86/um/asm/barrier.h | 4 +- 14 files changed, 305 insertions(+), 204 deletions(-)
Signature · 1 line
2.2.0.33.gc18b867
Borislav Petkov
maintainerPATCH 1/12 x86, copy_user: Remove FIX_ALIGNMENT define
From: Borislav Petkov <[email protected]>
It is superfluous now so remove it. No object file change before and after.
--- arch/x86/lib/copy_user_64.S | 5 ----- 1 file changed, 5 deletions(-)
arch/x86/lib/copy_user_64.S +0 -5
@@ -8,9 +8,6 @@ #include <linux/linkage.h> #include <asm/dwarf2.h> - -#define FIX_ALIGNMENT 1 - #include <asm/current.h> #include <asm/asm-offsets.h> #include <asm/thread_info.h>
@@ -45,7 +42,6 @@ .endm .macro ALIGN_DESTINATION -#ifdef FIX_ALIGNMENT /* check for bad alignment of destination */ movl %edi,%ecx andl $7,%ecx
@@ -67,7 +63,6 @@ _ASM_EXTABLE(100b,103b) _ASM_EXTABLE(101b,103b) -#endif .endm /* Standard copy_to_user with segment limit checking */
Signature · 1 line
2.2.0.33.gc18b867
Borislav Petkov
maintainerPATCH 2/12 x86, alternatives: Cleanup DPRINTK macro
In reply to Borislav PetkovFrom: Borislav Petkov <[email protected]>
Make it pass __func__ implicitly. Also, dump info about each replacing we're doing. Fixup comments and style while at it.
--- arch/x86/kernel/alternative.c | 41 +++++++++++++++++++++++++---------------- 1 file changed, 25 insertions(+), 16 deletions(-)
arch/x86/kernel/alternative.c +25 -16
@@ -52,10 +52,10 @@ static int __init setup_noreplace_paravirt(char *str)__setup ("noreplace-paravirt" , setup_noreplace_paravirt);#endif -#define DPRINTK (fmt, ...) \ -do { \ - if (debug_alternative) \ - printk(KERN_DEBUG fmt, ##__VA_ARGS__); \ +#define DPRINTK(fmt, args...) \ +do { \ + if (debug_alternative) \ + printk(KERN_DEBUG "%s: " fmt "\n", __func__, ##args); \ } while (0)/*
@@ -243,12 +243,13 @@ extern struct alt_instr __alt_instructions[], __alt_instructions_end[];extern s32 __smp_locks[], __smp_locks_end[];void *text_poke_early (void *addr,const void *opcode,size_t len); -/* Replace instructions with better alternatives for this CPU type. -This runs before SMP is initialized to avoid SMP problems with -self modifying code. This implies that asymmetric systems where -APs have less capabilities than the boot processor are not handled. -Tough. Make sure you disable such features by hand. */ - +/* +* Replace instructions with better alternatives for this CPU type. This runs +* before SMP is initialized to avoid SMP problems with self modifying code. +* This implies that asymmetric systems where APs have less capabilities than +* the boot processor are not handled. Tough. Make sure you disable such +* features by hand. +*/ void __init_or_module apply_alternatives(struct alt_instr *start,struct alt_instr *end) {
@@ -256,10 +257,10 @@ void __init_or_module apply_alternatives(struct alt_instr *start,u8 *instr, *replacement;u8 insnbuf[MAX_PATCH_LEN ]; -DPRINTK ("%s: alt table %p -> %p\n" , __func__, start, end); +DPRINTK ("alt table %p -> %p" , start, end);/* * The scan order should be from start to end. A later scanned -* alternative code can overwrite a previous scanned alternative code. +* alternative code can overwrite previously scanned alternative code. * Some kernel functions (e.g. memcpy, memset, etc) use this order to * patch code. *
@@ -275,11 +276,19 @@ void __init_or_module apply_alternatives(struct alt_instr *start,if (!boot_cpu_has (a->cpuid))continue ; +DPRINTK ("feat: %d*32+%d, old: (%p, len: %d), repl: (%p, len: %d)" , + a->cpuid >>5 , + a->cpuid &0x1f , + instr, a->instrlen, + replacement, a->replacementlen); +memcpy (insnbuf, replacement, a->replacementlen);/* 0xe8 is a relative jump; fix the offset. */ -if (*insnbuf ==0xe8 && a->replacementlen ==5 ) - *(s32 *)(insnbuf +1 ) += replacement - instr; +if (*insnbuf ==0xe8 && a->replacementlen ==5 ) { + *(s32 *)(insnbuf +1 ) += replacement - instr; +DPRINTK ("Fix CALL offset: 0x%x" , *(s32 *)(insnbuf +1 )); + }add_nops (insnbuf + a->replacementlen, a->instrlen - a->replacementlen);
@@ -371,8 +380,8 @@ void __init_or_module alternatives_smp_module_add(struct module *mod, smp->locks_end = locks_end; smp->text = text; smp->text_end = text_end; -DPRINTK ("%s: locks %p -> %p, text %p -> %p, name %s\n" , - __func__, smp->locks, smp->locks_end, +DPRINTK ("locks %p -> %p, text %p -> %p, name %s\n" , + smp->locks, smp->locks_end, smp->text, smp->text_end, smp->name);list_add_tail (&smp->next, &smp_alt_modules);
Signature · 1 line
2.2.0.33.gc18b867
Re: [PATCH v1 02/12] x86, alternatives: Cleanup DPRINTK macro
Quoted 2 lines · Borislav Petkov
Make it pass
__func__implicitly. Also, dump info about each replacing we're doing. Fixup comments and style while at it.
Perhaps s/DPRINTK/pr_debug/ and remove debug_alternative while using the generic dynamic debug facilities is feasible.
Borislav Petkov
maintainerPATCH 3/12 x86, alternatives: Add instruction padding
In reply to Borislav PetkovFrom: Borislav Petkov <[email protected]>
Up until now we have always paid attention to make sure the length of the new instruction replacing the old one is at least less or equal to the length of the old instruction. If the new instruction is longer, at the time it replaces the old instruction it will overwrite the beginning of the next instruction in the kernel image and cause your pants to catch fire.
So instead of having to pay attention, teach the alternatives framework to pad shorter old instructions with NOPs at buildtime - but only in the case when
len(old instruction(s)) < len(new instruction(s))
and add nothing in the >= case. (In that case we do add_nops() when patching).
This way the alternatives user shouldn't have to care about instruction sizes and simply use the macros.
Add asm ALTERNATIVE* flavor macros too, while at it.
Thanks to Michael Matz for the great help with toolchain questions.
--- arch/x86/include/asm/alternative-asm.h | 40 +++++++++++++++++++++++ arch/x86/include/asm/alternative.h | 58 ++++++++++++++++++++-------------- arch/x86/include/asm/cpufeature.h | 15 +++++---- arch/x86/kernel/alternative.c | 6 ++-- 4 files changed, 87 insertions(+), 32 deletions(-)
arch/x86/include/asm/alternative-asm.h +40 -0
@@ -26,6 +26,46 @@ .byte \alt_len .endm +.macro ALTERNATIVE oldinstr, newinstr, feature +140: + \oldinstr +141: + .skip -(((144f-143f)-(141b-140b)) > 0) * ((144f-143f)-(141b-140b)),0x90 +142: + + .pushsection .altinstructions,"a" + altinstruction_entry 140b,143f,\feature,142b-140b,144f-143f + .popsection + + .pushsection .altinstr_replacement,"ax" +143: + \newinstr +144: + .popsection +.endm + +.macro ALTERNATIVE_2 oldinstr, newinstr1, feature1, newinstr2, feature2 +140: + \oldinstr +141: + .skip -(((144f-143f)-(141b-140b)) > 0) * ((144f-143f)-(141b-140b)),0x90 + .skip -(((145f-144f)-(144f-143f)-(141b-140b)) > 0) * ((145f-144f)-(144f-143f)-(141b-140b)),0x90 +142: + + .pushsection .altinstructions,"a" + altinstruction_entry 140b,143f,\feature1,142b-140b,144f-143f + altinstruction_entry 140b,144f,\feature2,142b-140b,145f-144f + .popsection + + .pushsection .altinstr_replacement,"ax" +143: + \newinstr1 +144: + \newinstr2 +145: + .popsection +.endm + #endif /* __ASSEMBLY__ */ #endif /* _ASM_X86_ALTERNATIVE_ASM_H */
arch/x86/include/asm/alternative.h +35 -23
91 lines not on this page · raw message
arch/x86/include/asm/cpufeature.h +9 -6
@@ -489,22 +489,25 @@ static __always_inline __pure bool _static_cpu_has_safe(u16 bit)*/ asm_volatile_goto ("1: .byte 0xe9\n .long %l[t_dynamic] - 2f\n" "2:\n" +".skip -(((5f-4f) - (2b-1b)) > 0) * " +"((5f-4f) - (2b-1b)),0x90\n" +"3:\n" ".section .altinstructions,\"a\"\n" " .long 1b - .\n" /* src offset */ -" .long 3f - .\n" /* repl offset */ +" .long 4f - .\n" /* repl offset */ " .word %P1\n" /* always replace */ -" .byte 2b - 1b\n" /* src len */ -" .byte 4f - 3f\n" /* repl len */ +" .byte 3b - 1b\n" /* src len */ +" .byte 5f - 4f\n" /* repl len */ ".previous\n" ".section .altinstr_replacement,\"ax\"\n" -"3: .byte 0xe9\n .long %l[t_no] - 2b\n" -"4:\n" +"4: .byte 0xe9\n .long %l[t_no] - 2b\n" +"5:\n" ".previous\n" ".section .altinstructions,\"a\"\n" " .long 1b - .\n" /* src offset */ " .long 0\n" /* no replacement */ " .word %P0\n" /* feature bit */ -" .byte 2b - 1b\n" /* src len */ +" .byte 3b - 1b\n" /* src len */ " .byte 0\n" /* repl len */ ".previous\n" : : "i" (bit), "i" (X86_FEATURE_ALWAYS)
arch/x86/kernel/alternative.c +3 -3
@@ -270,7 +270,6 @@ void __init_or_module apply_alternatives(struct alt_instr *start,for (a = start; a < end; a++) { instr = (u8 *)&a->instr_offset + a->instr_offset; replacement = (u8 *)&a->repl_offset + a->repl_offset; -BUG_ON (a->replacementlen > a->instrlen);BUG_ON (a->instrlen >sizeof (insnbuf));BUG_ON (a->cpuid >= (NCAPINTS +NBUGINTS ) *32 );if (!boot_cpu_has (a->cpuid))
@@ -290,8 +289,9 @@ void __init_or_module apply_alternatives(struct alt_instr *start,DPRINTK ("Fix CALL offset: 0x%x" , *(s32 *)(insnbuf +1 )); } -add_nops (insnbuf + a->replacementlen, - a->instrlen - a->replacementlen); +if (a->instrlen > a->replacementlen) +add_nops (insnbuf + a->replacementlen, + a->instrlen - a->replacementlen);text_poke_early (instr, insnbuf, a->instrlen); }
Signature · 1 line
2.2.0.33.gc18b867
Borislav Petkov
maintainerPATCH 4/12 x86, alternatives: Make JMPs more robust
In reply to Borislav PetkovFrom: Borislav Petkov <[email protected]>
Up until now we had to pay attention to relative JMPs in alternatives about how their relative offset gets computed so that the jump target is still correct. Or, as it is the case for near CALLs (opcode e8), we still have to go and readjust the offset at patching time.
What is more, the static_cpu_has_safe() facility had to forcefully generate 5-byte JMPs since we couldn't rely on the compiler to generate properly sized ones. Worse than that, sometimes it would generate a replacement JMP which is longer than the original one, thus overwriting the beginning of the next instruction at patching time.
So, in order to alleviate all that and make using JMPs more straight-forward we go and pad the original instruction in an alternative block with NOPs at build time, should the replacement(s) be longer. This way, alternatives users shouldn't pay special attention so that original and replacement instruction sizes are fine but the assembler would simply add padding where needed and not do anything otherwise.
As a second aspect, we go and recompute JMPs at patching time so that we can try to make 5-byte JMPs into two-byte ones if possible. If not, we still have to recompute the offsets as the replacement JMP gets put far away in the .altinstr_replacement section leading to a wrong offset if copied verbatim.
For example, on a locally generated kernel image
old insn VA: 0xffffffff810014bd, CPU feat: X86_FEATURE_ALWAYS, size: 2 __switch_to:
ffffffff810014bd: eb 21 jmp ffffffff810014e0
repl insn: size: 5ffffffff81d0b23c: e9 b1 62 2f ff jmpq ffffffff810014f2
gets corrected to a 2-byte JMP:
apply_alternatives: feat: 3*32+21, old: (ffffffff810014bd, len: 2), repl: (ffffffff81d0b23c, len: 5)alt_insn: e9 b1 62 2f ffrecompute_jumps: next_rip: ffffffff81d0b241, tgt_rip: ffffffff810014f2, new_displ: 0x00000033, ret len: 2 converted to: eb 33 90 90 90
and a 5-byte JMP:
old insn VA: 0xffffffff81001516, CPU feat: X86_FEATURE_ALWAYS, size: 2 __switch_to:
ffffffff81001516: eb 30 jmp ffffffff81001548
repl insn: size: 5
ffffffff81d0b241: e9 10 63 2f ff jmpq ffffffff81001556
gets shortened into a two-byte one:
apply_alternatives: feat: 3*32+21, old: (ffffffff81001516, len: 2), repl: (ffffffff81d0b241, len: 5)alt_insn: e9 10 63 2f ffrecompute_jumps: next_rip: ffffffff81d0b246, tgt_rip: ffffffff81001556, new_displ: 0x0000003e, ret len: 2 converted to: eb 3e 90 90 90
... and so on.
This leads to a net win of around
40ish replacements * 3 bytes savings =~ 120 bytes of I$
on an AMD guest which means some savings of precious instruction cache bandwidth. The padding to the shorter 2-byte JMPs are single-byte NOPs which on smart microarchitectures means discarding NOPs at decode time and thus freeing up execution bandwidth.
--- arch/x86/include/asm/cpufeature.h | 10 +--- arch/x86/kernel/alternative.c | 103 ++++++++++++++++++++++++++++++++++++-- arch/x86/lib/copy_user_64.S | 11 ++-- 3 files changed, 105 insertions(+), 19 deletions(-)
arch/x86/include/asm/cpufeature.h +2 -8
@@ -481,13 +481,7 @@ static __always_inline __pure bool __static_cpu_has(u16 bit) static __always_inline __pure bool _static_cpu_has_safe(u16 bit) {#ifdef CC_HAVE_ASM_GOTO -/* -* We need to spell the jumps to the compiler because, depending on the offset, -* the replacement jump can be bigger than the original jump, and this we cannot -* have. Thus, we force the jump to the widest, 4-byte, signed relative -* offset even though the last would often fit in less bytes. -*/ -asm_volatile_goto ("1: .byte 0xe9\n .long %l[t_dynamic] - 2f\n" +asm_volatile_goto ("1: jmp %l[t_dynamic]\n" "2:\n" ".skip -(((5f-4f) - (2b-1b)) > 0) * " "((5f-4f) - (2b-1b)),0x90\n"
@@ -500,7 +494,7 @@ static __always_inline __pure bool _static_cpu_has_safe(u16 bit)" .byte 5f - 4f\n" /* repl len */ ".previous\n" ".section .altinstr_replacement,\"ax\"\n" -"4: .byte 0xe9\n .long %l[t_no] - 2b\n" +"4: jmp %l[t_no]\n" "5:\n" ".previous\n" ".section .altinstructions,\"a\"\n"
arch/x86/kernel/alternative.c +98 -5
147 lines not on this page · raw message
arch/x86/lib/copy_user_64.S +5 -6
@@ -25,14 +25,13 @@ */ .macro ALTERNATIVE_JUMP feature1,feature2,orig,alt1,alt2 0: - .byte 0xe9 /* 32bit jump */ - .long \orig-1f /* by default jump to orig */ + jmp \orig 1: .section .altinstr_replacement,"ax" -2: .byte 0xe9 /* near jump with 32bit immediate */ - .long \alt1-1b /* offset */ /* or alternatively to alt1 */ -3: .byte 0xe9 /* near jump with 32bit immediate */ - .long \alt2-1b /* offset */ /* or alternatively to alt2 */ +2: + jmp \alt1 +3: + jmp \alt2 .previous .section .altinstructions,"a"
Signature · 1 line
2.2.0.33.gc18b867
Borislav Petkov
maintainerPATCH 5/12 x86, alternatives: Use optimized NOPs for padding
In reply to Borislav PetkovFrom: Borislav Petkov <[email protected]>
Alternatives allow now for empty old instruction. In this case we go and pad the space with NOPs at assembly time. However, there are the optimal, longer NOPs which should be used. Do that at patching time.
--- arch/x86/kernel/alternative.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)
arch/x86/kernel/alternative.c +19 -1
@@ -323,6 +323,21 @@ done: n_dspl, (unsigned long)orig_insn + n_dspl + repl_len); } +static void __init_or_module optimize_nops(u8 *instr, u8 max_len) +{ +int i =0 ; + +while (instr[i] ==0x90 && i < max_len) + i++; + +if (!i) +return ; + +add_nops (instr, i); + +DUMP_BYTES (instr, i,"%p: optimized NOPs: " , instr); +} +/* * Replace instructions with better alternatives for this CPU type. This runs * before SMP is initialized to avoid SMP problems with self modifying code.
@@ -354,8 +369,11 @@ void __init_or_module apply_alternatives(struct alt_instr *start, replacement = (u8 *)&a->repl_offset + a->repl_offset;BUG_ON (a->instrlen >sizeof (insnbuf));BUG_ON (a->cpuid >= (NCAPINTS +NBUGINTS ) *32 ); -if (!boot_cpu_has (a->cpuid)) +if (!boot_cpu_has (a->cpuid)) { +if (instr[0 ] ==0x90 ) +optimize_nops (instr, a->instrlen);continue ; + } DPRINTK("feat: %d*32+%d, old: (%p, len: %d), repl: (%p, len: %d)", a->cpuid >> 5,
Signature · 1 line
2.2.0.33.gc18b867
Re: [PATCH v1 05/12] x86, alternatives: Use optimized NOPs for padding
Quoted 38 lines · Borislav Petkov
From: Borislav Petkov <[email protected]>
Alternatives allow now for empty old instruction. In this case we go and pad the space with NOPs at assembly time. However, there are the optimal, longer NOPs which should be used. Do that at patching time.
Signed-off-by Borislav Petkov <[email protected]>--- arch/x86/kernel/alternative.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)arch/x86/kernel/alternative.c +15
-0@@ -323,6 +323,21 @@ done: n_dspl, (unsigned long)orig_insn + n_dspl + repl_len); } +static void __init_or_module optimize_nops(u8 *instr, u8 max_len) +{ +int i =0 ; + +while (instr[i] ==0x90 && i < max_len) + i++; + +if (!i) +return ; + +add_nops (instr, i); + +DUMP_BYTES (instr, i,"%p: optimized NOPs: " , instr); +} +/* * Replace instructions with better alternatives for this CPU type. This runs * before SMP is initialized to avoid SMP problems with self modifying code.
arch/x86/kernel/alternative.c void __init_or_module apply_alternatives(struct alt_instr *start, · line 376
Quoted 9 lines
arch/x86/kernel/alternative.c +4
-1@@ -354,8 +369,11 @@ void __init_or_module apply_alternatives(struct alt_instr *start, replacement = (u8 *)&a->repl_offset + a->repl_offset;BUG_ON (a->instrlen >sizeof (insnbuf));BUG_ON (a->cpuid >= (NCAPINTS +NBUGINTS ) *32 ); -if (!boot_cpu_has (a->cpuid)) +if (!boot_cpu_has (a->cpuid)) { +if (instr[0 ] ==0x90 ) +optimize_nops (instr, a->instrlen);continue ; + }
I'm a bit confused here. Shouldn't NOPs after a non-NOP in the old instruction also be optimized?
--Andy
Borislav Petkov
maintainerRe: [PATCH v1 05/12] x86, alternatives: Use optimized NOPs for padding
Quoted 2 lines · Andy Lutomirski
I'm a bit confused here. Shouldn't NOPs after a non-NOP in the old instruction also be optimized?
Yes, they should! Good point.
Thanks, will fix.
Signature · 5 lines
Regards/Gruss,
Boris.
ECO tip #101: Trim your mails when you reply.
--Borislav Petkov
maintainerPATCH 6/12 x86, copy_page_64.S: Use generic ALTERNATIVE macro
In reply to Borislav PetkovFrom: Borislav Petkov <[email protected]>
... instead of the semi-version with the spelled out sections.
What is more, make the REP_GOOD version be the default copy_page() version as the majority of the relevant x86 CPUs do set X86_FEATURE_REP_GOOD. Thus, copy_page gets compiled to:
ffffffff8130af80 <copy_page>:
ffffffff8130af80: e9 0b 00 00 00 jmpq ffffffff8130af90 <copy_page_regs> ffffffff8130af85: b9 00 02 00 00 mov $0x200,%ecx ffffffff8130af8a: f3 48 a5 rep movsq %ds:(%rsi),%es:(%rdi) ffffffff8130af8d: c3 retq ffffffff8130af8e: 66 90 xchg %ax,%ax
ffffffff8130af90 <copy_page_regs>:
...
and after the alternatives have run, the JMP to the old, unrolled version gets NOPed out:
ffffffff8130af80 <copy_page>:
ffffffff8130af80: 66 66 90 xchg %ax,%ax ffffffff8130af83: 66 90 xchg %ax,%ax ffffffff8130af85: b9 00 02 00 00 mov $0x200,%ecx ffffffff8130af8a: f3 48 a5 rep movsq %ds:(%rsi),%es:(%rdi) ffffffff8130af8d: c3 retq
On modern uarches, those NOPs are cheaper than the unconditional JMP previously.
--- arch/x86/lib/copy_page_64.S | 37 ++++++++++++------------------------- 1 file changed, 12 insertions(+), 25 deletions(-)
arch/x86/lib/copy_page_64.S +12 -25
@@ -2,23 +2,26 @@ #include <linux/linkage.h> #include <asm/dwarf2.h> +#include <asm/cpufeature.h> #include <asm/alternative-asm.h> +/* + * Some CPUs run faster using the string copy instructions (sane microcode). + * It is also a lot simpler. Use this when possible. But, don't use streaming + * copy unless the CPU indicates X86_FEATURE_REP_GOOD. Could vary the + * prefetch distance based on SMP/UP. + */ ALIGN -copy_page_rep: +ENTRY(copy_page) CFI_STARTPROC + ALTERNATIVE "jmp copy_page_regs", "", X86_FEATURE_REP_GOOD movl $4096/8, %ecx rep movsq ret CFI_ENDPROC -ENDPROC(copy_page_rep) - -/* - * Don't use streaming copy unless the CPU indicates X86_FEATURE_REP_GOOD. - * Could vary the prefetch distance based on SMP/UP. -*/ +ENDPROC(copy_page) -ENTRY(copy_page) +ENTRY(copy_page_regs) CFI_STARTPROC subq $2*8, %rsp CFI_ADJUST_CFA_OFFSET 2*8
@@ -90,21 +93,5 @@ ENTRY(copy_page) addq $2*8, %rsp CFI_ADJUST_CFA_OFFSET -2*8 ret -.Lcopy_page_end: CFI_ENDPROC -ENDPROC(copy_page) - - /* Some CPUs run faster using the string copy instructions. - It is also a lot simpler. Use this when possible */ - -#include <asm/cpufeature.h> - - .section .altinstr_replacement,"ax" -1: .byte 0xeb /* jmp <disp8> */ - .byte (copy_page_rep - copy_page) - (2f - 1b) /* offset */ -2: - .previous - .section .altinstructions,"a" - altinstruction_entry copy_page, 1b, X86_FEATURE_REP_GOOD, \ - .Lcopy_page_end-copy_page, 2b-1b - .previous +ENDPROC(copy_page_regs)
Signature · 1 line
2.2.0.33.gc18b867
Borislav Petkov
maintainerPATCH 7/12 x86, copy_user_64.S: Convert to ALTERNATIVE_2
In reply to Borislav PetkovFrom: Borislav Petkov <[email protected]>
Use the asm macro and drop the locally grown version.
--- arch/x86/lib/copy_user_64.S | 40 ++++++++++------------------------------ 1 file changed, 10 insertions(+), 30 deletions(-)
arch/x86/lib/copy_user_64.S +10 -30
@@ -16,30 +16,6 @@ #include <asm/asm.h> #include <asm/smap.h> -/* - * By placing feature2 after feature1 in altinstructions section, we logically - * implement: - * If CPU has feature2, jmp to alt2 is used - * else if CPU has feature1, jmp to alt1 is used - * else jmp to orig is used. - */ - .macro ALTERNATIVE_JUMP feature1,feature2,orig,alt1,alt2 -0: - jmp \orig -1: - .section .altinstr_replacement,"ax" -2: - jmp \alt1 -3: - jmp \alt2 - .previous - - .section .altinstructions,"a" - altinstruction_entry 0b,2b,\feature1,5,5 - altinstruction_entry 0b,3b,\feature2,5,5 - .previous - .endm - .macro ALIGN_DESTINATION /* check for bad alignment of destination */ movl %edi,%ecx
@@ -73,9 +49,11 @@ ENTRY(_copy_to_user) jc bad_to_user cmpq TI_addr_limit(%rax),%rcx ja bad_to_user - ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,X86_FEATURE_ERMS, \ - copy_user_generic_unrolled,copy_user_generic_string, \ - copy_user_enhanced_fast_string + ALTERNATIVE_2 "jmp copy_user_generic_unrolled", \ + "jmp copy_user_generic_string", \ + X86_FEATURE_REP_GOOD, \ + "jmp copy_user_enhanced_fast_string", \ + X86_FEATURE_ERMS CFI_ENDPROC ENDPROC(_copy_to_user)
@@ -88,9 +66,11 @@ ENTRY(_copy_from_user) jc bad_from_user cmpq TI_addr_limit(%rax),%rcx ja bad_from_user - ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,X86_FEATURE_ERMS, \ - copy_user_generic_unrolled,copy_user_generic_string, \ - copy_user_enhanced_fast_string + ALTERNATIVE_2 "jmp copy_user_generic_unrolled", \ + "jmp copy_user_generic_string", \ + X86_FEATURE_REP_GOOD, \ + "jmp copy_user_enhanced_fast_string", \ + X86_FEATURE_ERMS CFI_ENDPROC ENDPROC(_copy_from_user)
Signature · 1 line
2.2.0.33.gc18b867
Borislav Petkov
maintainerPATCH 8/12 x86, SMAP: Use ALTERNATIVE macro
In reply to Borislav PetkovFrom: Borislav Petkov <[email protected]>
... and drop unfolded version. No need for ASM_NOP3 anymore either as the alternatives do the proper padding at build time and insert proper NOPs at boot time.
There should be no apparent operational change from this patch.
--- arch/x86/include/asm/smap.h | 30 +++++++++--------------------- 1 file changed, 9 insertions(+), 21 deletions(-)
arch/x86/include/asm/smap.h +9 -21
@@ -27,23 +27,11 @@#ifdef CONFIG_X86_SMAP -#define ASM_CLAC \ - 661: ASM_NOP3 ; \ - .pushsection .altinstr_replacement, "ax" ; \ - 662: __ASM_CLAC ; \ - .popsection ; \ - .pushsection .altinstructions, "a" ; \ - altinstruction_entry 661b, 662b, X86_FEATURE_SMAP, 3, 3 ; \ - .popsection - -#define ASM_STAC \ - 661: ASM_NOP3 ; \ - .pushsection .altinstr_replacement, "ax" ; \ - 662: __ASM_STAC ; \ - .popsection ; \ - .pushsection .altinstructions, "a" ; \ - altinstruction_entry 661b, 662b, X86_FEATURE_SMAP, 3, 3 ; \ - .popsection +#define ASM_CLAC \ + ALTERNATIVE "", __stringify(__ASM_CLAC), X86_FEATURE_SMAP + +#define ASM_STAC \ + ALTERNATIVE "", __stringify(__ASM_STAC), X86_FEATURE_SMAP#else /* CONFIG_X86_SMAP */
@@ -61,20 +49,20 @@ static __always_inline void clac(void) {/* Note: a barrier is implicit in alternative() */ -alternative (ASM_NOP3 ,__stringify (__ASM_CLAC),X86_FEATURE_SMAP ); +alternative ("" ,__stringify (__ASM_CLAC),X86_FEATURE_SMAP ); } static __always_inline void stac(void) {/* Note: a barrier is implicit in alternative() */ -alternative (ASM_NOP3 ,__stringify (__ASM_STAC),X86_FEATURE_SMAP ); +alternative ("" ,__stringify (__ASM_STAC),X86_FEATURE_SMAP ); }/* These macros can be used in asm() statements */ #define ASM_CLAC \ - ALTERNATIVE(ASM_NOP3, __stringify(__ASM_CLAC), X86_FEATURE_SMAP) + ALTERNATIVE("", __stringify(__ASM_CLAC), X86_FEATURE_SMAP)#define ASM_STAC \ - ALTERNATIVE(ASM_NOP3, __stringify(__ASM_STAC), X86_FEATURE_SMAP) + ALTERNATIVE("", __stringify(__ASM_STAC), X86_FEATURE_SMAP)#else /* CONFIG_X86_SMAP */
Signature · 1 line
2.2.0.33.gc18b867
Borislav Petkov
maintainerPATCH 9/12 x86, alternative: Convert X86_INVD_BUG to generic macro
In reply to Borislav PetkovFrom: Borislav Petkov <[email protected]>
Booting a 486 kernel on an AMD guest says:
[ 0.416564] apply_alternatives: feat: 0*32+25, old: (c160a475, len: 5), repl: (c19557d4, len: 5) [ 0.420009] c160a475: alt_insn: 68 10 35 00 c1 [ 0.425106] c19557d4: rpl_insn: 68 80 39 00 c1
which looks ok:
old insn VA: 0xc160a475, CPU feat: X86_FEATURE_XMM, size: 5 simd_coprocessor_error:
c160a475: 68 10 35 00 c1 push $0xc1003510 <do_general_protection>
repl insn: 0xc19557d4, size: 5
c160a475: 68 80 39 00 c1 push $0xc1003980 <do_simd_coprocessor_error>--- arch/x86/kernel/entry_32.S | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-)
arch/x86/kernel/entry_32.S +3 -9
@@ -816,15 +816,9 @@ ENTRY(simd_coprocessor_error) pushl_cfi $0 #ifdef CONFIG_X86_INVD_BUG /* AMD 486 bug: invd from userspace calls exception 19 instead of #GP */ -661: pushl_cfi $do_general_protection -662: -.section .altinstructions,"a" - altinstruction_entry 661b, 663f, X86_FEATURE_XMM, 662b-661b, 664f-663f -.previous -.section .altinstr_replacement,"ax" -663: pushl $do_simd_coprocessor_error -664: -.previous + ALTERNATIVE "pushl_cfi $do_general_protection", \ + "pushl $do_simd_coprocessor_error", \ + X86_FEATURE_XMM #else pushl_cfi $do_simd_coprocessor_error #endif
Signature · 1 line
2.2.0.33.gc18b867
Borislav Petkov
maintainerPATCH 10/12 x86, alternatives: Convert clear_page_64.S
In reply to Borislav PetkovFrom: Borislav Petkov <[email protected]>
Move clear_page() up so that we can get 2-byte forward JMPs when patching:
[ 2.388007] apply_alternatives: feat: 3*32+16, old: (ffffffff8130adb0, len: 5), repl: (ffffffff81d0b859, len: 5) [ 2.390992] ffffffff8130adb0: alt_insn: 90 90 90 90 90 [ 2.393169] recompute_jump: new_displ: 0x0000003e [ 2.394628] ffffffff81d0b859: rpl_insn: eb 3e 66 66 90
even though compiler generated a 5-byte JMPs which we padded with 5 NOPs:
old insn VA: 0xffffffff8130adb0, CPU feat: X86_FEATURE_REP_GOOD, size: 5 clear_page:
ffffffff8130adb0 <clear_page>:
ffffffff8130adb0: 90 nop ffffffff8130adb1: 90 nop ffffffff8130adb2: 90 nop ffffffff8130adb3: 90 nop ffffffff8130adb4: 90 nop repl insn: 0xffffffff81d0b859, size: 5
ffffffff81d0b859: e9 92 f5 5f ff jmpq ffffffff8130adf0
ffffffff8130adb0 <clear_page>:ffffffff8130adb0: e9 92 f5 5f ff jmpq ffffffff8090a347
old insn VA: 0xffffffff8130adb0, CPU feat: X86_FEATURE_ERMS, size: 5 clear_page:
ffffffff8130adb0 <clear_page>:
ffffffff8130adb0: 90 nop ffffffff8130adb1: 90 nop ffffffff8130adb2: 90 nop ffffffff8130adb3: 90 nop ffffffff8130adb4: 90 nop repl insn: 0xffffffff81d0b85e, size: 5
ffffffff81d0b85e: e9 9d f5 5f ff jmpq ffffffff8130ae00
ffffffff8130adb0 <clear_page>:ffffffff8130adb0: e9 9d f5 5f ff jmpq ffffffff8090a352
Also, make the REP_GOOD version be the default as the majority of machines set REP_GOOD. This way we get to save ourselves the JMP.
--- arch/x86/lib/clear_page_64.S | 66 ++++++++++++++++++-------------------------- 1 file changed, 27 insertions(+), 39 deletions(-)
arch/x86/lib/clear_page_64.S +27 -39
@@ -1,31 +1,35 @@ #include <linux/linkage.h> #include <asm/dwarf2.h> +#include <asm/cpufeature.h> #include <asm/alternative-asm.h> /* - * Zero a page. - * rdi page - */ -ENTRY(clear_page_c) + * Most CPUs support enhanced REP MOVSB/STOSB instructions. It is + * recommended to use this when possible and we do use them by default. + * If enhanced REP MOVSB/STOSB is not available, try to use fast string. + * Otherwise, use original. + */ + +/* + * Zero a page. + * %rdi - page + */ +ENTRY(clear_page) CFI_STARTPROC + + ALTERNATIVE_2 "jmp clear_page_orig", "", X86_FEATURE_REP_GOOD, \ + "jmp clear_page_c_e", X86_FEATURE_ERMS + movl $4096/8,%ecx xorl %eax,%eax rep stosq ret CFI_ENDPROC -ENDPROC(clear_page_c) +ENDPROC(clear_page) -ENTRY(clear_page_c_e) +ENTRY(clear_page_orig) CFI_STARTPROC - movl $4096,%ecx - xorl %eax,%eax - rep stosb - ret - CFI_ENDPROC -ENDPROC(clear_page_c_e) -ENTRY(clear_page) - CFI_STARTPROC xorl %eax,%eax movl $4096/64,%ecx .p2align 4
@@ -45,29 +49,13 @@ ENTRY(clear_page) nop ret CFI_ENDPROC -.Lclear_page_end: -ENDPROC(clear_page) - - /* - * Some CPUs support enhanced REP MOVSB/STOSB instructions. - * It is recommended to use this when possible. - * If enhanced REP MOVSB/STOSB is not available, try to use fast string. - * Otherwise, use original function. - * - */ +ENDPROC(clear_page_orig) -#include <asm/cpufeature.h> - - .section .altinstr_replacement,"ax" -1: .byte 0xeb /* jmp <disp8> */ - .byte (clear_page_c - clear_page) - (2f - 1b) /* offset */ -2: .byte 0xeb /* jmp <disp8> */ - .byte (clear_page_c_e - clear_page) - (3f - 2b) /* offset */ -3: - .previous - .section .altinstructions,"a" - altinstruction_entry clear_page,1b,X86_FEATURE_REP_GOOD,\ - .Lclear_page_end-clear_page, 2b-1b - altinstruction_entry clear_page,2b,X86_FEATURE_ERMS, \ - .Lclear_page_end-clear_page,3b-2b - .previous +ENTRY(clear_page_c_e) + CFI_STARTPROC + movl $4096,%ecx + xorl %eax,%eax + rep stosb + ret + CFI_ENDPROC +ENDPROC(clear_page_c_e)
Signature · 1 line
2.2.0.33.gc18b867
Borislav Petkov
maintainerPATCH 11/12 x86, alternative: Use alternative_2 in rdtsc_barrier
In reply to Borislav PetkovFrom: Borislav Petkov <[email protected]>
... now that we have it.
--- arch/x86/include/asm/barrier.h | 6 ++---- arch/x86/um/asm/barrier.h | 4 ++-- 2 files changed, 4 insertions(+), 6 deletions(-)
arch/x86/include/asm/barrier.h +2 -4
@@ -95,13 +95,11 @@ do { \* Stop RDTSC speculation. This is needed when you need to use RDTSC * (or get_cycles or vread that possibly accesses the TSC) in a defined * code region. -* -* (Could use an alternative three way for this if there was one.) */ static __always_inline void rdtsc_barrier(void) { -alternative (ASM_NOP3 ,"mfence" ,X86_FEATURE_MFENCE_RDTSC ); -alternative (ASM_NOP3 ,"lfence" ,X86_FEATURE_LFENCE_RDTSC ); +alternative_2 ("" ,"mfence" ,X86_FEATURE_MFENCE_RDTSC , +"lfence" ,X86_FEATURE_LFENCE_RDTSC ); }#endif /* _ASM_X86_BARRIER_H */
arch/x86/um/asm/barrier.h +2 -2
@@ -64,8 +64,8 @@*/ static inline void rdtsc_barrier (void ) { -alternative (ASM_NOP3 ,"mfence" ,X86_FEATURE_MFENCE_RDTSC ); -alternative (ASM_NOP3 ,"lfence" ,X86_FEATURE_LFENCE_RDTSC ); +alternative_2 ("" ,"mfence" ,X86_FEATURE_MFENCE_RDTSC , +"lfence" ,X86_FEATURE_LFENCE_RDTSC ); }#endif
Signature · 1 line
2.2.0.33.gc18b867
Re: [PATCH v1 11/12] x86, alternative: Use alternative_2 in rdtsc_barrier
Quoted 3 lines · Borislav Petkov
From: Borislav Petkov <[email protected]>
... now that we have it.
Hallelujah!
Quoted 44 lines
Cc Richard Weinberger <[email protected]>Signed-off-by Borislav Petkov <[email protected]>--- arch/x86/include/asm/barrier.h | 6 ++---- arch/x86/um/asm/barrier.h | 4 ++-- 2 files changed, 4 insertions(+), 6 deletions(-)arch/x86/include/asm/barrier.h +2
-4@@ -95,13 +95,11 @@ do { \* Stop RDTSC speculation. This is needed when you need to use RDTSC * (or get_cycles or vread that possibly accesses the TSC) in a defined * code region. -* -* (Could use an alternative three way for this if there was one.) */ static __always_inline void rdtsc_barrier(void) { -alternative (ASM_NOP3 ,"mfence" ,X86_FEATURE_MFENCE_RDTSC ); -alternative (ASM_NOP3 ,"lfence" ,X86_FEATURE_LFENCE_RDTSC ); +alternative_2 ("" ,"mfence" ,X86_FEATURE_MFENCE_RDTSC , +"lfence" ,X86_FEATURE_LFENCE_RDTSC ); }#endif /* _ASM_X86_BARRIER_H */ arch/x86/um/asm/barrier.h +2
-2@@ -64,8 +64,8 @@*/ static inline void rdtsc_barrier (void ) { -alternative (ASM_NOP3 ,"mfence" ,X86_FEATURE_MFENCE_RDTSC ); -alternative (ASM_NOP3 ,"lfence" ,X86_FEATURE_LFENCE_RDTSC ); +alternative_2 ("" ,"mfence" ,X86_FEATURE_MFENCE_RDTSC , +"lfence" ,X86_FEATURE_LFENCE_RDTSC ); }#endif
Borislav Petkov
maintainerRe: [PATCH v1 11/12] x86, alternative: Use alternative_2 in rdtsc_barrier
Quoted 8 lines · Andy Lutomirski
Quoted 3 lines · Borislav Petkov
From: Borislav Petkov <[email protected]>
... now that we have it.
Hallelujah!
Acked-by Andy Lutomirski <[email protected]>
Haha, yeah.
Btw, the uml bits are going away because we realized we don't need the barrier.h version there so Richard is removing it. I'll keep your ACK though :)
Thanks and thanks for going through the series.
Signature · 5 lines
Regards/Gruss,
Boris.
ECO tip #101: Trim your mails when you reply.
--Borislav Petkov
maintainerPATCH 12/12 x86, alternative: Cleanup prefetch primitives
In reply to Borislav PetkovFrom: Borislav Petkov <[email protected]>
This is based on a patch originally by hpa.
With the current improvements to the alternatives, we can simply use %P1 as a mem8 operand constraint and rely on the toolchain to generate the proper instruction sizes. For example, on 32-bit, where we use an empty old instruction we get:
[ 2.226656] apply_alternatives: feat: 6*32+8, old: (c104648b, len: 4), repl: (c195566c, len: 4) [ 2.228005] c104648b: alt_insn: 90 90 90 90 [ 2.230534] c195566c: rpl_insn: 0f 0d 4b 5c
...
[ 3.653760] apply_alternatives: feat: 6*32+8, old: (c18e09b4, len: 3), repl: (c1955948, len: 3) [ 3.656004] c18e09b4: alt_insn: 90 90 90 [ 3.658101] c1955948: rpl_insn: 0f 0d 08
...
[ 4.200010] apply_alternatives: feat: 6*32+8, old: (c1190cf9, len: 7), repl: (c1955a79, len: 7) [ 4.204004] c1190cf9: alt_insn: 90 90 90 90 90 90 90 [ 4.206809] c1955a79: rpl_insn: 0f 0d 0d a0 d4 85 c1
all with the proper padding done depending on the size of the replacement instruction the compiler generates.
--- arch/x86/include/asm/apic.h | 2 +- arch/x86/include/asm/processor.h | 16 +++++++--------- arch/x86/kernel/cpu/amd.c | 5 +++++ 3 files changed, 13 insertions(+), 10 deletions(-)
arch/x86/include/asm/apic.h +1 -1
@@ -91,7 +91,7 @@ static inline void native_apic_mem_write(u32 reg, u32 v) {volatile u32 *addr = (volatile u32 *)(APIC_BASE + reg); -alternative_io ("movl %0, %1" ,"xchgl %0, %1" ,X86_BUG_11AP , +alternative_io ("movl %0, %P1" ,"xchgl %0, %P1" ,X86_BUG_11AP ,ASM_OUTPUT2 ("=r" (v),"=m" (*addr)),ASM_OUTPUT2 ("0" (v),"m" (*addr))); }
arch/x86/include/asm/processor.h +7 -9
@@ -794,10 +794,10 @@ extern char ignore_fpu_irq;#define ARCH_HAS_SPINLOCK_PREFETCH #ifdef CONFIG_X86_32 -# define BASE_PREFETCH ASM_NOP4 +# define BASE_PREFETCH ""# define ARCH_HAS_PREFETCH #else -# define BASE_PREFETCH "prefetcht0 (%1)" +# define BASE_PREFETCH "prefetcht0 %P1"#endif /*
@@ -808,10 +808,9 @@ extern char ignore_fpu_irq;*/ static inline void prefetch (const void *x) { -alternative_input (BASE_PREFETCH , -"prefetchnta (%1)" , +alternative_input (BASE_PREFETCH ,"prefetchnta %P1" ,X86_FEATURE_XMM , -"r" (x)); +"m" (*(const char *)x)); }/*
@@ -821,10 +820,9 @@ static inline void prefetch(const void *x)*/ static inline void prefetchw (const void *x) { -alternative_input (BASE_PREFETCH , -"prefetchw (%1)" , -X86_FEATURE_3DNOW , -"r" (x)); +alternative_input (BASE_PREFETCH ,"prefetchw %P1" , +X86_FEATURE_3DNOWPREFETCH , +"m" (*(const char *)x)); }static inline void spin_lock_prefetch (const void *x)
arch/x86/kernel/cpu/amd.c +5 -0
@@ -711,6 +711,11 @@ static void init_amd(struct cpuinfo_x86 *c)set_cpu_bug (c,X86_BUG_AMD_APIC_C1E );rdmsr_safe (MSR_AMD64_PATCH_LEVEL , &c->microcode, &dummy); + +/* 3DNow or LM implies PREFETCHW */ +if (!cpu_has (c,X86_FEATURE_3DNOWPREFETCH )) +if (cpu_has (c,X86_FEATURE_3DNOW ) ||cpu_has (c,X86_FEATURE_LM )) +set_cpu_cap (c,X86_FEATURE_3DNOWPREFETCH ); }#ifdef CONFIG_X86_32
Signature · 1 line
2.2.0.33.gc18b867
Quoted 15 lines · Borislav Petkov
From: Borislav Petkov <[email protected]>
[ Changelog is in version-increasing number so that one can follow the
evolution of the patch set in a more natural way (i.e., latest version comes at the end. ]v0:
this is something which hpa and I talked about recently:
the ability for the alternatives code to add padding to the original instruction in case the replacement is longer and also to be able to simply write "jmp" and not care about which JMP exactly the compiler generates and whether the relative offsets are correct.
Quoted 3 lines
So this is a stab at it, it seems to boot in kvm here but it needs more staring to make sure we're actually generating the proper code at all times.
Ok, this looks really cool.
Do you have any stats about how many such (affected) patch sites we have in say the 64-bit defconfig kernel?
I.e. what's the scope of this optimization?
Thanks,
Ingo
Borislav Petkov
maintainerQuoted 1 line · Ingo Molnar
Ok, this looks really cool.
Thanks, I think so too :-)
Quoted 4 lines
Do you have any stats about how many such (affected) patch sites we have in say the 64-bit defconfig kernel?
I.e. what's the scope of this optimization?
I'm currently reworking the NOP optimizing aspect. I'll send it out when it is done along with stats. Probably next week the latest.
Thanks.
Signature · 5 lines
Regards/Gruss,
Boris.
ECO tip #101: Trim your mails when you reply.
--Borislav Petkov
maintainerQuoted 2 lines · Ingo Molnar
Do you have any stats about how many such (affected) patch sites we have in say the 64-bit defconfig kernel?
It is a good thing I have a tool to dump the alternatives patch sites and what gets replaced by what. Because now I can create such stats just like that! And hpa was questioning that tool's justification at the time :-)
Anyway, here are the stats:
x86_64 defconfig:
Alternatives sites total: 2478
Total padding added (in Bytes): 6051
The padding is currently done for:
X86_FEATURE_ALWAYSX86_FEATURE_ERMSX86_FEATURE_LFENCE_RDTSCX86_FEATURE_MFENCE_RDTSCX86_FEATURE_SMAP
This is with the latest version of the patchset. Of course, on each machine the alternatives sites actually being patched are a subset of the total number.
Signature · 5 lines
Regards/Gruss,
Boris.
ECO tip #101: Trim your mails when you reply.
--