Skip to contentSkip to conversation

net: bnx2x: fix sparse warnings

PATCH Applied Lad Prabhakar 3 participants 3 messages Feb 5, 2015 – Feb 6, 2015

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 net: bnx2x: fix sparse warnings

From: "Lad, Prabhakar" <[email protected]>

this patch fixes following sparse warnings:

bnx2x_main.c:9172:6: warning: symbol 'bnx2x_stop_ptp' was not declared. Should it be static? bnx2x_main.c:13321:6: warning: symbol 'bnx2x_register_phc' was not declared. Should it be static? bnx2x_main.c:14638:5: warning: symbol 'bnx2x_enable_ptp_packets' was not declared. Should it be static?

---
Found this issue on linux-next (gcc version 4.8.2, sparse version 0.4.5-rc1)and applies on top linux-next.

 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +3 -3
index 0758c8b..7155e1d 100644
@@ -9169,7 +9169,7 @@ static void bnx2x_disable_ptp(struct bnx2x *bp)
 }
 
 /* Called during unload, to stop PTP-related stuff */
-void bnx2x_stop_ptp(struct bnx2x *bp)
+static void bnx2x_stop_ptp(struct bnx2x *bp)
 {
 	/* Cancel PTP work queue. Should be done after the Tx queues are
 	 * drained to prevent additional scheduling.
@@ -13318,7 +13318,7 @@ static int bnx2x_ptp_enable(struct ptp_clock_info *ptp,
 	return -ENOTSUPP;
 }
 
-void bnx2x_register_phc(struct bnx2x *bp)
+static void bnx2x_register_phc(struct bnx2x *bp)
 {
 	/* Fill the ptp_clock_info struct and register PTP clock*/
 	bp->ptp_clock_info.owner = THIS_MODULE;
@@ -14635,7 +14635,7 @@ static int bnx2x_send_reset_timesync_ramrod(struct bnx2x *bp)
 	return bnx2x_func_state_change(bp, &func_params);
 }
 
-int bnx2x_enable_ptp_packets(struct bnx2x *bp)
+static int bnx2x_enable_ptp_packets(struct bnx2x *bp)
 {
 	struct bnx2x_queue_state_params q_params;
 	int rc, i;
Signature · 1 line
1.9.1
Acked-by on v1 1/1
#1 lore raw
Quoted 10 lines · Lad Prabhakar

From: "Lad, Prabhakar" <[email protected]>

this patch fixes following sparse warnings:

bnx2x_main.c:9172:6: warning: symbol 'bnx2x_stop_ptp' was not declared. Should it be static? bnx2x_main.c:13321:6: warning: symbol 'bnx2x_register_phc' was not declared. Should it be static? bnx2x_main.c:14638:5: warning: symbol 'bnx2x_enable_ptp_packets' was not declared. Should it be static?

---

Note there is no need to cc lkml for such patches, netdev is more than enough.

maintainer Applied
#2 lore raw
In reply to Lad Prabhakar

From: Lad Prabhakar <[email protected]>
Date: Thu, 5 Feb 2015 15:47:17 +0000

Quoted 9 lines

From: "Lad, Prabhakar" <[email protected]>

this patch fixes following sparse warnings:

bnx2x_main.c:9172:6: warning: symbol 'bnx2x_stop_ptp' was not declared. Should it be static? bnx2x_main.c:13321:6: warning: symbol 'bnx2x_register_phc' was not declared. Should it be static? bnx2x_main.c:14638:5: warning: symbol 'bnx2x_enable_ptp_packets' was not declared. Should it be static?

Applied.