Added Pids for Actisense Usb Devices
Subsystems (2)
PATCH 1/1 Added Pids for Actisense Usb Devices
From: Mark Glover <[email protected]>
--- drivers/usb/serial/ftdi_sio.c | 17 +++++++++++++++++ drivers/usb/serial/ftdi_sio_ids.h | 21 +++++++++++++++++++++ 2 files changed, 38 insertions(+)
drivers/usb/serial/ftdi_sio.c +17 -0
@@ -978,6 +978,23 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) },/* GE Healthcare devices */ { USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) }, +/* Active Research (Actisense) devices */ + { USB_DEVICE(FTDI_VID, ACTISENSE_NDC_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_USG_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_NGT_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_NGW_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_D9AC_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_D9AD_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_D9AE_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_D9AF_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEAGAUGE_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASWITCH_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_NMEA2000_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ETHERNET_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_WIFI_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) }, { } /* Terminating entry */ };
drivers/usb/serial/ftdi_sio_ids.h +20 -0
@@ -1438,3 +1438,23 @@*/ #define GE_HEALTHCARE_VID 0x1901#define GE_HEALTHCARE_NEMO_TRACKER_PID 0x0015 + +/* +* Active Research (Actisense) devices +*/ +#define ACTISENSE_NDC_PID 0xD9A8/* NDC USB Serial Adapter */ +#define ACTISENSE_USG_PID 0xD9A9/* USG USB Serial Adapter */ +#define ACTISENSE_NGT_PID 0xD9AA/* NGT NMEA2000 Interface */ +#define ACTISENSE_NGW_PID 0xD9AB/* NGW NMEA2000 Gateway */ +#define ACTISENSE_D9AC_PID 0xD9AC/* Actisense Reserved */ +#define ACTISENSE_D9AD_PID 0xD9AD/* Actisense Reserved */ +#define ACTISENSE_D9AE_PID 0xD9AE/* Actisense Reserved */ +#define ACTISENSE_D9AF_PID 0xD9AF/* Actisense Reserved */ +#define CHETCO_SEAGAUGE_PID 0xA548/* SeaGauge USB Adapter */ +#define CHETCO_SEASWITCH_PID 0xA549/* SeaSwitch USB Adapter */ +#define CHETCO_SEASMART_NMEA2000_PID 0xA54A/* SeaSmart NMEA2000 Gateway */ +#define CHETCO_SEASMART_ETHERNET_PID 0xA54B/* SeaSmart Ethernet Gateway */ +#define CHETCO_SEASMART_WIFI_PID 0xA5AC/* SeaSmart Wifi Gateway */ +#define CHETCO_SEASMART_DISPLAY_PID 0xA5AD/* SeaSmart NMEA2000 Display */ +#define CHETCO_SEASMART_LITE_PID 0xA5AE/* SeaSmart Lite USB Adapter */ +#define CHETCO_SEASMART_ANALOG_PID 0xA5AF/* SeaSmart Analog Adapter */
--
1.7.9.5
Johan Hovold
maintainerQuoted 3 lines · Mark Glover
From: Mark Glover <[email protected]>
Signed-off-by Mark Glover <[email protected]>
What is different from your previous version? Please address my comments to that one before resending.
Thanks,
Johan
Sorry, no difference just ignorance on my part.
I had the impression having just missed one release I needed to resubmit the patch.
Best regards
Mark Glover
Software Engineer
Actisense®/Active Research Ltd
Tel:+44 (0)1202 746682
http://www.actisense.com
Active Research Limited is registered in England, Company number: 3295909. The information contained in this e-mail is confidential and is intended for the named recipient only. If you are not the named recipient, please notify us by telephone on +44 1202 746682 immediately and destroy the message by deleting it from your computer. Active Research Limited has taken every reasonable precaution to ensure that any attachment to this e-mail has been checked for viruses. However, we cannot accept liability for any damage sustained as a result of any such software viruses and advise you to carry out your own virus check before opening any attachment(s). Furthermore, we do not accept responsibility for any change made to this message after it was sent by the sender.
-----Original Message-----
From: Johan Hovold [mailto:[email protected]] On Behalf Of Johan Hovold
Sent: 12 February 2015 02:24
To: Mark Glover
Cc: [email protected]; [email protected]; [email protected]; [email protected]
Subject: Re: [PATCH] Added Pids for Actisense Usb Devices
Quoted 3 lines · Mark Glover
From: Mark Glover <[email protected]>
Signed-off-by Mark Glover <[email protected]>
What is different from your previous version? Please address my comments to that one before resending.
Thanks,
Johan
Johan Hovold
maintainerQuoted 3 lines · Mark Glover
Sorry, no difference just ignorance on my part.
I had the impression having just missed one release I needed to resubmit the patch.
No, I'm still waiting for you to answer my comments on your patch. Mostly some clarifications needed.
Thanks,
Johan