qemu-img convert: Fix copy length for the iteration
PATCH 1/1 qemu-img convert: Fix copy length for the iteration
qemu-img converts already checks the block status of the next sectors to copy and skips them if it knows that they don't need to be copied (e.g. because they are zero and the destination is zero-initialised).
It doesn't, however, limit the number of sectors read to the number of allocated sectors when copying data yet. This means that when using -B, some data is needlessly copied from the backing file into the overlay. For images without backing files, it means that more data is read than is necessary, even though the zero buffer detection will still keep those sectors sparse.
This patch changes qemu-img to respect the number of allocated sectors and limit its requests accordingly when processing data, which fixes -B to expose the expected behaviour and is a performance optimisation for other cases.
--- qemu-img.c | 1 + tests/qemu-iotests/122 | 56 ++++++++++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/122.out | 11 +++++++++ tests/qemu-iotests/group | 1 + 4 files changed, 69 insertions(+) create mode 100755 tests/qemu-iotests/122 create mode 100644 tests/qemu-iotests/122.out
qemu-img.c +1 -0
@@ -1809,6 +1809,7 @@ restart: } n =MIN (nb_sectors, bufsectors); + n =MIN (n, sector_num_next_status - sector_num);/* round down request length to an aligned sector, but * do not bother doing this on short requests. They happen
tests/qemu-iotests/122 new file +56 -0
56 lines not on this page · raw message
tests/qemu-iotests/122.out new file +11 -0
@@ -0,0 +1,11 @@ +QA output created by 122 +Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file='TEST_DIR/t.IMGFMT.base' +wrote 67108864/67108864 bytes at offset 0 +64 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 3145728/3145728 bytes at offset 0 +3 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +Offset Length File +0 0x300000 TEST_DIR/t.IMGFMT.orig +0x300000 0x3d00000 TEST_DIR/t.IMGFMT.base +*** done
tests/qemu-iotests/group +1 -0
@@ -117,3 +117,4 @@ 113 rw auto quick 114 rw auto quick 116 rw auto quick +122 rw auto quick
Signature · 1 line
1.8.3.1
Quoted 32 lines · Kevin Wolf
qemu-img converts already checks the block status of the next sectors to copy and skips them if it knows that they don't need to be copied (e.g. because they are zero and the destination is zero-initialised).
It doesn't, however, limit the number of sectors read to the number of allocated sectors when copying data yet. This means that when using -B, some data is needlessly copied from the backing file into the overlay. For images without backing files, it means that more data is read than is necessary, even though the zero buffer detection will still keep those sectors sparse.
This patch changes qemu-img to respect the number of allocated sectors and limit its requests accordingly when processing data, which fixes -B to expose the expected behaviour and is a performance optimisation for other cases.
Reported-by Max Reitz <[email protected]>Signed-off-by Kevin Wolf <[email protected]>--- qemu-img.c | 1 + tests/qemu-iotests/122 | 56 ++++++++++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/122.out | 11 +++++++++ tests/qemu-iotests/group | 1 + 4 files changed, 69 insertions(+)create mode 100755 tests/qemu-iotests/122
create mode 100644 tests/qemu-iotests/122.outqemu-img.c +0
-0
qemu-img.c restart: · line 1812
Quoted 4 lines
qemu-img.c +1
-0@@ -1809,6 +1809,7 @@ restart: } n =MIN (nb_sectors, bufsectors); + n =MIN (n, sector_num_next_status - sector_num);
This needs to be done only if sector_num_next_status > sector_num, otherwise we'll run into an infinite loop.
Apparently I accidentally broke -n for qemu-img convert, but once I get it working again, you can see that this command:
$ qemu-img convert -n -O raw test.qcow2 nbd://localhost:10809
does not terminate (because out_baseimg is NULL and has_zero_init is false due to nbd not supporting that, which means that sector_num_next_status is never set to anything but 0).
Other than that, this looks good to me.
Max
Quoted 90 lines
qemu-img.c +0
-0/* round down request length to an aligned sector, but * do not bother doing this on short requests. They happen tests/qemu-iotests/122 new file +56
-0@@ -0,0 +1,56 @@ +#!/bin/bash +# +# Test image sparseness after qemu-img convert +# +# Copyright (C) 2015 Red Hat, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +# creator [email protected] + +seq="$(basename $0)" +echo "QA output created by $seq" + +here="$PWD" +tmp=/tmp/$$ +status=1 # failure is the default! + +_cleanup() +{ + _cleanup_test_img +} +trap "_cleanup; exit \$status" 0 1 2 3 15 + +# get standard environment, filters and checks +. ./common.rc +. ./common.filter + +_supported_fmt qcow2 +_supported_proto generic +_supported_os Linux + + +TEST_IMG=$TEST_IMG.base _make_test_img 64M +_make_test_img -b $TEST_IMG.base +$QEMU_IO -c "write -P 0x11 0 64M" $TEST_IMG.base 2>&1 | _filter_qemu_io | _filter_testdir +$QEMU_IO -c "write -P 0x22 0 3M" $TEST_IMG 2>&1 | _filter_qemu_io | _filter_testdir +$QEMU_IMG convert -O $IMGFMT -B $TEST_IMG.base $TEST_IMG $TEST_IMG.orig +$QEMU_IMG map $TEST_IMG.orig | _filter_qemu_img_map + +# success, all done +echo '*** done' +rm -f $seq.full +status=0tests/qemu-iotests/122.out new file +11
-0@@ -0,0 +1,11 @@ +QA output created by 122 +Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file='TEST_DIR/t.IMGFMT.base' +wrote 67108864/67108864 bytes at offset 0 +64 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 3145728/3145728 bytes at offset 0 +3 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +Offset Length File +0 0x300000 TEST_DIR/t.IMGFMT.orig +0x300000 0x3d00000 TEST_DIR/t.IMGFMT.base +*** donetests/qemu-iotests/group +1
-0@@ -117,3 +117,4 @@ 113 rw auto quick 114 rw auto quick 116 rw auto quick +122 rw auto quick
Am 11.02.2015 um 15:39 hat Max Reitz geschrieben:
Quoted 43 lines · Kevin Wolf
Quoted 32 lines
qemu-img converts already checks the block status of the next sectors to copy and skips them if it knows that they don't need to be copied (e.g. because they are zero and the destination is zero-initialised).
It doesn't, however, limit the number of sectors read to the number of allocated sectors when copying data yet. This means that when using -B, some data is needlessly copied from the backing file into the overlay. For images without backing files, it means that more data is read than is necessary, even though the zero buffer detection will still keep those sectors sparse.
This patch changes qemu-img to respect the number of allocated sectors and limit its requests accordingly when processing data, which fixes -B to expose the expected behaviour and is a performance optimisation for other cases.
Reported-by Max Reitz <[email protected]>Signed-off-by Kevin Wolf <[email protected]>--- qemu-img.c | 1 + tests/qemu-iotests/122 | 56 ++++++++++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/122.out | 11 +++++++++ tests/qemu-iotests/group | 1 + 4 files changed, 69 insertions(+) create mode 100755 tests/qemu-iotests/122 create mode 100644 tests/qemu-iotests/122.outqemu-img.c +0
-0qemu-img.c restart: · line 1811
Quoted 3 lines
qemu-img.c +1
-0@@ -1809,6 +1809,7 @@ restart: } n =MIN (nb_sectors, bufsectors); + n =MIN (n, sector_num_next_status - sector_num);This needs to be done only if
sector_num_next_status>sector_num, otherwise we'll run into an infinite loop.Apparently I accidentally broke -n for qemu-img convert, but once I get it working again, you can see that this command:
Quoted 7 lines
$ qemu-img convert -n -O raw test.qcow2 nbd://localhost:10809does not terminate (because
out_baseimgis NULL andhas_zero_initis false due to nbd not supporting that, which means thatsector_num_next_statusis never set to anything but 0).Other than that, this looks good to me.
Except that it means that the whole function is crap.
We should unconditionally be doing the bdrv_co_get_block_status() and save at least the reads if we can. This would also enable us to use bdrv_co_write_zeroes() for the cases where an explicit zero write is needed.
I guess it's time to rewrite the whole thing...
Kevin