sunxi: otg: Fix peripheral mode
Subsystems (2)
PATCH 1/1 sunxi: otg: Fix peripheral mode
Peripheral mode needs us to signal vusb high to the phy for it to work, just like the host mode does.
Signed-off-by Hans de Goede <[email protected]>
--- drivers/usb/musb-new/sunxi.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-)
drivers/usb/musb-new/sunxi.c +1 -12
@@ -145,16 +145,6 @@ static void USBC_ForceIdToHigh(__iomem void *base)musb_writel (base, USBC_REG_o_ISCR, reg_val); } -static void USBC_ForceVbusValidDisable (__iomem void *base) -{ -u32 reg_val; - - reg_val =musb_readl (base, USBC_REG_o_ISCR); - reg_val &= ~(0x03 <<USBC_BP_ISCR_FORCE_VBUS_VALID ); - reg_val =USBC_WakeUp_ClearChangeDetect (reg_val); -musb_writel (base, USBC_REG_o_ISCR, reg_val); -} -static void USBC_ForceVbusValidToHigh (__iomem void *base) {u32 reg_val;
@@ -248,12 +238,11 @@ static int sunxi_musb_init(struct musb *musb)if (is_host_enabled (musb)) {/* Host mode */ USBC_ForceIdToLow (musb->mregs); -USBC_ForceVbusValidToHigh (musb->mregs); }else {/* Peripheral mode */ USBC_ForceIdToHigh (musb->mregs); -USBC_ForceVbusValidDisable (musb->mregs); } +USBC_ForceVbusValidToHigh (musb->mregs);return 0 ; }
Signature · 1 line
2.1.0
PATCH 1/1 sunxi: otg: Fix peripheral mode
Quoted 4 lines · Hans de Goede
Peripheral mode needs us to signal vusb high to the phy for it to work, just like the host mode does.
Signed-off-by Hans de Goede <[email protected]>
Acked-by Ian Campbell <[email protected]>