Skip to contentSkip to conversation

net: eth: altera: Change access ports to mdio for all xMII applications

PATCH Applied Vince Bridgers 2 participants 2 messages Feb 12, 2015 – Feb 19, 2015

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 net: eth: altera: Change access ports to mdio for all xMII applications

Change use of Altera TSE's MDIO access from phy 0 registers to phy 1 registers. This allows support for GMII, MII, RGMII, and SGMII designs where the external PHY is always accesible through Altera TSE's MDIO phy 1 registers and Altera's PCS is accessible through MDIO phy 0 registers for SGMII applications.

---
 drivers/net/ethernet/altera/altera_tse_main.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/net/ethernet/altera/altera_tse_main.c +4 -4
index 996bdf1..a1ee261 100644
@@ -105,11 +105,11 @@ static int altera_tse_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 
 	/* set MDIO address */
 	csrwr32((mii_id & 0x1f), priv->mac_dev,
-		tse_csroffs(mdio_phy0_addr));
+		tse_csroffs(mdio_phy1_addr));
 
 	/* get the data */
 	return csrrd32(priv->mac_dev,
-		       tse_csroffs(mdio_phy0) + regnum * 4) & 0xffff;
+		       tse_csroffs(mdio_phy1) + regnum * 4) & 0xffff;
 }
 
 static int altera_tse_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
@@ -120,10 +120,10 @@ static int altera_tse_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 
 	/* set MDIO address */
 	csrwr32((mii_id & 0x1f), priv->mac_dev,
-		tse_csroffs(mdio_phy0_addr));
+		tse_csroffs(mdio_phy1_addr));
 
 	/* write the data */
-	csrwr32(value, priv->mac_dev, tse_csroffs(mdio_phy0) + regnum * 4);
+	csrwr32(value, priv->mac_dev, tse_csroffs(mdio_phy1) + regnum * 4);
 	return 0;
 }
 
Signature · 1 line
1.9.1
maintainer Applied
#1 lore raw

From: Vince Bridgers <[email protected]>
Date: Thu, 12 Feb 2015 10:47:33 -0600

Quoted 9 lines

Change use of Altera TSE's MDIO access from phy 0 registers to phy 1 registers. This allows support for GMII, MII, RGMII, and SGMII designs where the external PHY is always accesible through Altera TSE's MDIO phy 1 registers and Altera's PCS is accessible through MDIO phy 0 registers for SGMII applications.

Applied to net-next.