Skip to contentSkip to conversation

bpf: Enable BPF JIT on ppc32

PATCH In review Denis Kirjanov 4 participants 13 messages Feb 15, 2015 – Feb 16, 2015

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

cover bpf: Enable BPF JIT on ppc32

This patch series enables BPF JIT on ppc32. There are relatevily few chnages in the code to make it work.

All test_bpf tests passed both on 7447a and P2041-based machines.

 arch/powerpc/Kconfig                  |   2 +-
 arch/powerpc/include/asm/asm-compat.h |   4 +
 arch/powerpc/include/asm/ppc-opcode.h |   2 +
 arch/powerpc/net/Makefile             |   2 +-
 arch/powerpc/net/bpf_jit.h            |  47 ++++++-
 arch/powerpc/net/bpf_jit_64.S         | 229 ----------------------------------
 arch/powerpc/net/bpf_jit_asm.S        | 229 ++++++++++++++++++++++++++++++++++
 arch/powerpc/net/bpf_jit_comp.c       |  32 ++---
 8 files changed, 300 insertions(+), 247 deletions(-)
#1 lore raw

PATCH 1/6 ppc: Kconfig: Enable BPF JIT on ppc32

---
 arch/powerpc/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/Kconfig +1 -1
index 22b0940..5084bdc 100644
@@ -126,7 +126,7 @@ config PPC
 	select IRQ_FORCED_THREADING
 	select HAVE_RCU_TABLE_FREE if SMP
 	select HAVE_SYSCALL_TRACEPOINTS
-	select HAVE_BPF_JIT if PPC64
+	select HAVE_BPF_JIT
 	select HAVE_ARCH_JUMP_LABEL
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select ARCH_HAS_GCOV_PROFILE_ALL
Signature · 1 line
2.1.3
#2 lore raw

Re: [PATCH net-next 1/6] ppc: Kconfig: Enable BPF JIT on ppc32

On Sun, 2015-02-15 at 21:06 +0300, Denis Kirjanov wrote:
[]

arch/powerpc/Kconfig

Quoted 1 line
arch/powerpc/Kconfig +0 -0

[]

arch/powerpc/Kconfig config PPC · line 129

Quoted 6 lines
arch/powerpc/Kconfig +1 -1
@@ -126,7 +126,7 @@ config PPC
 	select IRQ_FORCED_THREADING
 	select HAVE_RCU_TABLE_FREE if SMP
 	select HAVE_SYSCALL_TRACEPOINTS
-	select HAVE_BPF_JIT if PPC64
+	select HAVE_BPF_JIT

trivia:

Should this be the last patch of the series?

maintainer
#3 lore raw

Re: [PATCH net-next 1/6] ppc: Kconfig: Enable BPF JIT on ppc32

From: Joe Perches <[email protected]>
Date: Sun, 15 Feb 2015 10:15:54 -0800

Quoted 13 lines · Denis Kirjanov

[]

arch/powerpc/Kconfig

Quoted 1 line
arch/powerpc/Kconfig +0 -0

[]

arch/powerpc/Kconfig config PPC · line 129

Quoted 6 lines
arch/powerpc/Kconfig +1 -1
@@ -126,7 +126,7 @@ config PPC
 	select IRQ_FORCED_THREADING
 	select HAVE_RCU_TABLE_FREE if SMP
 	select HAVE_SYSCALL_TRACEPOINTS
-	select HAVE_BPF_JIT if PPC64
+	select HAVE_BPF_JIT

trivia:

Quoted 1 line

Should this be the last patch of the series?

Yes, that's the way I see it too.

#4 lore raw

Re: [PATCH net-next 1/6] ppc: Kconfig: Enable BPF JIT on ppc32

Quoted 16 lines · David Miller

From: Joe Perches <[email protected]>
Date: Sun, 15 Feb 2015 10:15:54 -0800

Quoted 13 lines · Denis Kirjanov

[]

arch/powerpc/Kconfig

Quoted 1 line
arch/powerpc/Kconfig +0 -0

[]

arch/powerpc/Kconfig config PPC · line 129

Quoted 6 lines
arch/powerpc/Kconfig +1 -1
@@ -126,7 +126,7 @@ config PPC
 	select IRQ_FORCED_THREADING
 	select HAVE_RCU_TABLE_FREE if SMP
 	select HAVE_SYSCALL_TRACEPOINTS
-	select HAVE_BPF_JIT if PPC64
+	select HAVE_BPF_JIT

trivia:

Quoted 4 lines
Quoted 1 line

Should this be the last patch of the series?

Yes, that's the way I see it too.

Ok, I'll resend the series if the such thing matters.

Thank you.

#5 lore raw

PATCH 2/6 ppc: bpf: add required compatibility macros for jit

In reply to Denis Kirjanov
---
 arch/powerpc/include/asm/asm-compat.h | 4 ++++
 1 file changed, 4 insertions(+)
arch/powerpc/include/asm/asm-compat.h +4 -0
index 21be8ae..dc85dcb 100644
@@ -23,6 +23,8 @@
 #define PPC_STL		stringify_in_c(std)
 #define PPC_STLU	stringify_in_c(stdu)
 #define PPC_LCMPI	stringify_in_c(cmpdi)
+#define PPC_LCMPLI	stringify_in_c(cmpldi)
+#define PPC_LCMP	stringify_in_c(cmpd)
 #define PPC_LONG	stringify_in_c(.llong)
 #define PPC_LONG_ALIGN	stringify_in_c(.balign 8)
 #define PPC_TLNEI	stringify_in_c(tdnei)
@@ -52,6 +54,8 @@
 #define PPC_STL		stringify_in_c(stw)
 #define PPC_STLU	stringify_in_c(stwu)
 #define PPC_LCMPI	stringify_in_c(cmpwi)
+#define PPC_LCMPLI	stringify_in_c(cmplwi)
+#define PPC_LCMP	stringify_in_c(cmpw)
 #define PPC_LONG	stringify_in_c(.long)
 #define PPC_LONG_ALIGN	stringify_in_c(.balign 4)
 #define PPC_TLNEI	stringify_in_c(twnei)
Signature · 1 line
2.1.3
#6 lore raw

PATCH 3/6 ppc: bpf: add reqired opcodes for ppc32

In reply to Denis Kirjanov
---
 arch/powerpc/include/asm/ppc-opcode.h | 2 ++
 1 file changed, 2 insertions(+)
arch/powerpc/include/asm/ppc-opcode.h +2 -0
index 03cd858..2eadde0 100644
@@ -212,6 +212,8 @@
 #define PPC_INST_LWZ			0x80000000
 #define PPC_INST_STD			0xf8000000
 #define PPC_INST_STDU			0xf8000001
+#define PPC_INST_STW			0x90000000
+#define PPC_INST_STWU			0x94000000
 #define PPC_INST_MFLR			0x7c0802a6
 #define PPC_INST_MTLR			0x7c0803a6
 #define PPC_INST_CMPWI			0x2c000000
Signature · 1 line
2.1.3
#7 lore raw

PATCH 4/6 ppc: bpf: update jit to use compatibility macros

In reply to Denis Kirjanov

Use helpers from the asm-compat.h to wrap up assembly mnemonics

---
 arch/powerpc/net/bpf_jit.h      | 47 ++++++++++++++++++++++++++-
 arch/powerpc/net/bpf_jit_64.S   | 70 ++++++++++++++++++++---------------------
 arch/powerpc/net/bpf_jit_comp.c | 32 ++++++++++---------
 3 files changed, 98 insertions(+), 51 deletions(-)
arch/powerpc/net/bpf_jit.h +46 -1
index c406aa9..2d5e715 100644
@@ -10,12 +10,25 @@
 #ifndef _BPF_JIT_H
 #define _BPF_JIT_H
 
+#ifdef CONFIG_PPC64
+#define BPF_PPC_STACK_R3_OFF	48
 #define BPF_PPC_STACK_LOCALS	32
 #define BPF_PPC_STACK_BASIC	(48+64)
 #define BPF_PPC_STACK_SAVE	(18*8)
 #define BPF_PPC_STACKFRAME	(BPF_PPC_STACK_BASIC+BPF_PPC_STACK_LOCALS+ \
 				 BPF_PPC_STACK_SAVE)
 #define BPF_PPC_SLOWPATH_FRAME	(48+64)
+#else
+#define BPF_PPC_STACK_R3_OFF	24
+#define BPF_PPC_STACK_LOCALS	16
+#define BPF_PPC_STACK_BASIC	(24+32)
+#define BPF_PPC_STACK_SAVE	(18*4)
+#define BPF_PPC_STACKFRAME	(BPF_PPC_STACK_BASIC+BPF_PPC_STACK_LOCALS+ \
+				 BPF_PPC_STACK_SAVE)
+#define BPF_PPC_SLOWPATH_FRAME	(24+32)
+#endif
+
+#define REG_SZ         (BITS_PER_LONG/8)
 
 /*
  * Generated code register usage:
@@ -57,7 +70,11 @@ DECLARE_LOAD_FUNC(sk_load_half);
 DECLARE_LOAD_FUNC(sk_load_byte);
 DECLARE_LOAD_FUNC(sk_load_byte_msh);
 
+#ifdef CONFIG_PPC64
 #define FUNCTION_DESCR_SIZE	24
+#else
+#define FUNCTION_DESCR_SIZE	0
+#endif
 
 /*
  * 16-bit immediate helper macros: HA() is for use with sign-extending instrs
@@ -86,7 +103,12 @@ DECLARE_LOAD_FUNC(sk_load_byte_msh);
 #define PPC_LIS(r, i)		PPC_ADDIS(r, 0, i)
 #define PPC_STD(r, base, i)	EMIT(PPC_INST_STD | ___PPC_RS(r) |	      \
 				     ___PPC_RA(base) | ((i) & 0xfffc))
-
+#define PPC_STDU(r, base, i)	EMIT(PPC_INST_STDU | ___PPC_RS(r) |	      \
+				     ___PPC_RA(base) | ((i) & 0xfffc))
+#define PPC_STW(r, base, i)	EMIT(PPC_INST_STW | ___PPC_RS(r) |	      \
+				     ___PPC_RA(base) | ((i) & 0xfffc))
+#define PPC_STWU(r, base, i)	EMIT(PPC_INST_STWU | ___PPC_RS(r) |	      \
+				     ___PPC_RA(base) | ((i) & 0xfffc))
 
 #define PPC_LBZ(r, base, i)	EMIT(PPC_INST_LBZ | ___PPC_RT(r) |	      \
 				     ___PPC_RA(base) | IMM_L(i))
@@ -98,6 +120,17 @@ DECLARE_LOAD_FUNC(sk_load_byte_msh);
 				     ___PPC_RA(base) | IMM_L(i))
 #define PPC_LHBRX(r, base, b)	EMIT(PPC_INST_LHBRX | ___PPC_RT(r) |	      \
 				     ___PPC_RA(base) | ___PPC_RB(b))
+
+#ifdef CONFIG_PPC64
+#define PPC_BPF_LL(r, base, i) do { PPC_LD(r, base, i); } while(0)
+#define PPC_BPF_STL(r, base, i) do { PPC_STD(r, base, i); } while(0)
+#define PPC_BPF_STLU(r, base, i) do { PPC_STDU(r, base, i); } while(0)
+#else
+#define PPC_BPF_LL(r, base, i) do { PPC_LWZ(r, base, i); } while(0)
+#define PPC_BPF_STL(r, base, i) do { PPC_STW(r, base, i); } while(0)
+#define PPC_BPF_STLU(r, base, i) do { PPC_STWU(r, base, i); } while(0)
+#endif
+
 /* Convenience helpers for the above with 'far' offsets: */
 #define PPC_LBZ_OFFS(r, base, i) do { if ((i) < 32768) PPC_LBZ(r, base, i);   \
 		else {	PPC_ADDIS(r, base, IMM_HA(i));			      \
@@ -115,6 +148,12 @@ DECLARE_LOAD_FUNC(sk_load_byte_msh);
 		else {	PPC_ADDIS(r, base, IMM_HA(i));			      \
 			PPC_LHZ(r, r, IMM_L(i)); } } while(0)
 
+#ifdef CONFIG_PPC64
+#define PPC_LL_OFFS(r, base, i) do { PPC_LD_OFFS(r, base, i); } while(0)
+#else
+#define PPC_LL_OFFS(r, base, i) do { PPC_LWZ_OFFS(r, base, i); } while(0)
+#endif
+
 #define PPC_CMPWI(a, i)		EMIT(PPC_INST_CMPWI | ___PPC_RA(a) | IMM_L(i))
 #define PPC_CMPDI(a, i)		EMIT(PPC_INST_CMPDI | ___PPC_RA(a) | IMM_L(i))
 #define PPC_CMPLWI(a, i)	EMIT(PPC_INST_CMPLWI | ___PPC_RA(a) | IMM_L(i))
@@ -196,6 +235,12 @@ DECLARE_LOAD_FUNC(sk_load_byte_msh);
 				PPC_ORI(d, d, (uintptr_t)(i) & 0xffff);	      \
 		} } while (0);
 
+#ifdef CONFIG_PPC64
+#define PPC_FUNC_ADDR(d,i) do { PPC_LI64(d, i); } while(0)
+#else
+#define PPC_FUNC_ADDR(d,i) do { PPC_LI32(d, i); } while(0)
+#endif
+
 #define PPC_LHBRX_OFFS(r, base, i) \
 		do { PPC_LI32(r, i); PPC_LHBRX(r, r, base); } while(0)
 #ifdef __LITTLE_ENDIAN__
arch/powerpc/net/bpf_jit_64.S +35 -35

173 lines not on this page · raw message

arch/powerpc/net/bpf_jit_comp.c +17 -15
index d1916b5..8b29268 100644
@@ -1,8 +1,9 @@
-/* bpf_jit_comp.c: BPF JIT compiler for PPC64
+/* bpf_jit_comp.c: BPF JIT compiler
  *
  * Copyright 2011 Matt Evans <[email protected]>, IBM Corporation
  *
  * Based on the x86 BPF compiler, by Eric Dumazet ([email protected])
+ * Ported to ppc32 by Denis Kirjanov <[email protected]>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -36,11 +37,11 @@ static void bpf_jit_build_prologue(struct bpf_prog *fp, u32 *image,
 		if (ctx->seen & SEEN_DATAREF) {
 			/* If we call any helpers (for loads), save LR */
 			EMIT(PPC_INST_MFLR | __PPC_RT(R0));
-			PPC_STD(0, 1, 16);
+			PPC_BPF_STL(0, 1, PPC_LR_STKOFF);
 
 			/* Back up non-volatile regs. */
-			PPC_STD(r_D, 1, -(8*(32-r_D)));
-			PPC_STD(r_HL, 1, -(8*(32-r_HL)));
+			PPC_BPF_STL(r_D, 1, -(REG_SZ*(32-r_D)));
+			PPC_BPF_STL(r_HL, 1, -(REG_SZ*(32-r_HL)));
 		}
 		if (ctx->seen & SEEN_MEM) {
 			/*
@@ -49,11 +50,10 @@ static void bpf_jit_build_prologue(struct bpf_prog *fp, u32 *image,
 			 */
 			for (i = r_M; i < (r_M+16); i++) {
 				if (ctx->seen & (1 << (i-r_M)))
-					PPC_STD(i, 1, -(8*(32-i)));
+					PPC_BPF_STL(i, 1, -(REG_SZ*(32-i)));
 			}
 		}
-		EMIT(PPC_INST_STDU | __PPC_RS(R1) | __PPC_RA(R1) |
-		     (-BPF_PPC_STACKFRAME & 0xfffc));
+		PPC_BPF_STLU(1, 1, -BPF_PPC_STACKFRAME);
 	}
 
 	if (ctx->seen & SEEN_DATAREF) {
@@ -67,7 +67,7 @@ static void bpf_jit_build_prologue(struct bpf_prog *fp, u32 *image,
 							 data_len));
 		PPC_LWZ_OFFS(r_HL, r_skb, offsetof(struct sk_buff, len));
 		PPC_SUB(r_HL, r_HL, r_scratch1);
-		PPC_LD_OFFS(r_D, r_skb, offsetof(struct sk_buff, data));
+		PPC_LL_OFFS(r_D, r_skb, offsetof(struct sk_buff, data));
 	}
 
 	if (ctx->seen & SEEN_XREG) {
@@ -99,16 +99,16 @@ static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx)
 	if (ctx->seen & (SEEN_MEM | SEEN_DATAREF)) {
 		PPC_ADDI(1, 1, BPF_PPC_STACKFRAME);
 		if (ctx->seen & SEEN_DATAREF) {
-			PPC_LD(0, 1, 16);
+			PPC_BPF_LL(0, 1, PPC_LR_STKOFF);
 			PPC_MTLR(0);
-			PPC_LD(r_D, 1, -(8*(32-r_D)));
-			PPC_LD(r_HL, 1, -(8*(32-r_HL)));
+			PPC_BPF_LL(r_D, 1, -(REG_SZ*(32-r_D)));
+			PPC_BPF_LL(r_HL, 1, -(REG_SZ*(32-r_HL)));
 		}
 		if (ctx->seen & SEEN_MEM) {
 			/* Restore any saved non-vol registers */
 			for (i = r_M; i < (r_M+16); i++) {
 				if (ctx->seen & (1 << (i-r_M)))
-					PPC_LD(i, 1, -(8*(32-i)));
+					PPC_BPF_LL(i, 1, -(REG_SZ*(32-i)));
 			}
 		}
 	}
@@ -355,7 +355,7 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 						ifindex) != 4);
 			BUILD_BUG_ON(FIELD_SIZEOF(struct net_device,
 						type) != 2);
-			PPC_LD_OFFS(r_scratch1, r_skb, offsetof(struct sk_buff,
+			PPC_LL_OFFS(r_scratch1, r_skb, offsetof(struct sk_buff,
 								dev));
 			PPC_CMPDI(r_scratch1, 0);
 			if (ctx->pc_ret0 != -1) {
@@ -437,7 +437,7 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 		common_load:
 			/* Load from [K]. */
 			ctx->seen |= SEEN_DATAREF;
-			PPC_LI64(r_scratch1, func);
+			PPC_FUNC_ADDR(r_scratch1, func);
 			PPC_MTLR(r_scratch1);
 			PPC_LI32(r_addr, K);
 			PPC_BLRL();
@@ -463,7 +463,7 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 			 * in the helper functions.
 			 */
 			ctx->seen |= SEEN_DATAREF | SEEN_XREG;
-			PPC_LI64(r_scratch1, func);
+			PPC_FUNC_ADDR(r_scratch1, func);
 			PPC_MTLR(r_scratch1);
 			PPC_ADDI(r_addr, r_X, IMM_L(K));
 			if (K >= 32768)
@@ -685,9 +685,11 @@ void bpf_jit_compile(struct bpf_prog *fp)
 
 	if (image) {
 		bpf_flush_icache(code_base, code_base + (proglen/4));
+#ifdef CONFIG_PPC64
 		/* Function descriptor nastiness: Address + TOC */
 		((u64 *)image)[0] = (u64)code_base;
 		((u64 *)image)[1] = local_paca->kernel_toc;
+#endif
 		fp->bpf_func = (void *)image;
 		fp->jited = true;
 	}
Signature · 1 line
2.1.3
#8 lore raw

PATCH 5/6 ppc: bpf: rename bpf_jit_64.S to bpf_jit_asm.S

In reply to Denis Kirjanov
---
 arch/powerpc/net/Makefile                        | 2 +-
 arch/powerpc/net/{bpf_jit_64.S => bpf_jit_asm.S} | 0
 2 files changed, 1 insertion(+), 1 deletion(-)
 rename arch/powerpc/net/{bpf_jit_64.S => bpf_jit_asm.S} (100%)
arch/powerpc/net/Makefile +1 -1
index 266b395..1306a58 100644
@@ -1,4 +1,4 @@
 #
 # Arch-specific network modules
 #
-obj-$(CONFIG_BPF_JIT) += bpf_jit_64.o bpf_jit_comp.o
+obj-$(CONFIG_BPF_JIT) += bpf_jit_asm.o bpf_jit_comp.o
arch/powerpc/net/bpf_jit_asm.S renamed from arch/powerpc/net/bpf_jit_64.S +0 -0
similarity index 100%
rename from arch/powerpc/net/bpf_jit_64.S
rename to arch/powerpc/net/bpf_jit_asm.S
Signature · 1 line
2.1.3
#9 lore raw

PATCH 6/6 ppc: bpf: Add SKF_AD_CPU for ppc32

In reply to Denis Kirjanov
---
 arch/powerpc/net/bpf_jit.h      | 17 +++++++++++++++++
 arch/powerpc/net/bpf_jit_comp.c | 14 +-------------
 2 files changed, 18 insertions(+), 13 deletions(-)
arch/powerpc/net/bpf_jit.h +17 -0
index 2d5e715..889fd19 100644
@@ -154,6 +154,23 @@ DECLARE_LOAD_FUNC(sk_load_byte_msh);
 #define PPC_LL_OFFS(r, base, i) do { PPC_LWZ_OFFS(r, base, i); } while(0)
 #endif
 
+#ifdef CONFIG_SMP
+#ifdef CONFIG_PPC64
+#define PPC_BPF_LOAD_CPU(r)		\
+	do { BUILD_BUG_ON(FIELD_SIZEOF(struct paca_struct, paca_index) != 2);	\
+		PPC_LHZ_OFFS(r, 13, offsetof(struct paca_struct, paca_index));		\
+	} while (0)
+#else
+#define PPC_BPF_LOAD_CPU(r)     \
+	do { BUILD_BUG_ON(FIELD_SIZEOF(struct thread_info, cpu) != 4);			\
+		PPC_LHZ_OFFS(r, (1 & ~(THREAD_SIZE - 1)),							\
+				offsetof(struct thread_info, cpu));							\
+	} while(0)
+#endif
+#else
+#define PPC_BPF_LOAD_CPU(r) do { PPC_LI(r, 0); } while(0)
+#endif
+
 #define PPC_CMPWI(a, i)		EMIT(PPC_INST_CMPWI | ___PPC_RA(a) | IMM_L(i))
 #define PPC_CMPDI(a, i)		EMIT(PPC_INST_CMPDI | ___PPC_RA(a) | IMM_L(i))
 #define PPC_CMPLWI(a, i)	EMIT(PPC_INST_CMPLWI | ___PPC_RA(a) | IMM_L(i))
arch/powerpc/net/bpf_jit_comp.c +1 -13
index 8b29268..17cea18 100644
@@ -411,20 +411,8 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 			PPC_SRWI(r_A, r_A, 5);
 			break;
 		case BPF_ANC | SKF_AD_CPU:
-#ifdef CONFIG_SMP
-			/*
-			 * PACA ptr is r13:
-			 * raw_smp_processor_id() = local_paca->paca_index
-			 */
-			BUILD_BUG_ON(FIELD_SIZEOF(struct paca_struct,
-						  paca_index) != 2);
-			PPC_LHZ_OFFS(r_A, 13,
-				     offsetof(struct paca_struct, paca_index));
-#else
-			PPC_LI(r_A, 0);
-#endif
+			PPC_BPF_LOAD_CPU(r_A);
 			break;
-
 			/*** Absolute loads from packet header/data ***/
 		case BPF_LD | BPF_W | BPF_ABS:
 			func = CHOOSE_LOAD_FUNC(K, sk_load_word);
Signature · 1 line
2.1.3
maintainer
#10 lore raw
In reply to Denis Kirjanov
Quoted 4 lines · Denis Kirjanov

This patch series enables BPF JIT on ppc32. There are relatevily few chnages in the code to make it work.

All test_bpf tests passed both on 7447a and P2041-based machines.

I'm just wondering, next to the feedback that has already been provided, would opening this up for ppc32 make it significantly more difficult in future to migrate from classic BPF JIT to eBPF JIT eventually (which is what we want long-term)? Being curious, is there any ongoing effort from ppc people?

#11 lore raw
Quoted 4 lines · Daniel Borkmann
Quoted 3 lines · Denis Kirjanov

This patch series enables BPF JIT on ppc32. There are relatevily few chnages in the code to make it work.

Quoted 8 lines
Quoted 1 line

All test_bpf tests passed both on 7447a and P2041-based machines.

I'm just wondering, next to the feedback that has already been provided, would opening this up for ppc32 make it significantly more difficult in future to migrate from classic BPF JIT to eBPF JIT eventually (which is what we want long-term)? Being curious, is there any ongoing effort from ppc people?

Well, I don't see significant challenges to enable eBPF on ppc64 in the future. I'll start working on it after I get this merged

maintainer
#12 lore raw

On 02/16/2015 08:13 AM, Denis Kirjanov wrote:
...

Quoted 2 lines

Well, I don't see significant challenges to enable eBPF on ppc64 in the future. I'll start working on it after I get this merged

Cool, awesome!