Skip to contentSkip to conversation

iio: ti-adc128s052: Add DT binding documentation

PATCH In review Angelo Compagnucci 2 participants 2 messages Feb 16, 2015 – Mar 8, 2015 1 message not in the archive

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 iio: ti-adc128s052: Add DT binding documentation

Adding binding documentation for Texas Instruments' ADC128S052 ADC chip.

---
 .../devicetree/bindings/iio/adc/ti-adc128s052.txt      | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt
Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt new file +18 -0
new file mode 100644
index 0000000..c8d682b
@@ -0,0 +1,18 @@
+* Texas Instruments' ADC128S052 ADC chip
+
+Required properties:
+ - compatible: Should be "ti,adc128s052"
+ - reg: spi chip select number for the device
+ - vref-supply: The regulator supply for ADC reference voltage
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+		Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+adc@0 {
+	compatible = "ti,adc128s052";
+	reg = <0>;
+	vref-supply = <&vdd_supply>;
+	spi-max-frequency = <1000000>;
+};
Signature · 1 line
1.9.1

A message that is not in the archive (sent off-list or not yet received): 1424085712-22275-1-git-send-email-angelo.compagnucci-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

#2 lore raw
Quoted 1 line · Angelo Compagnucci

Adding binding documentation for Texas Instruments' ADC128S052 ADC chip.

Patch is fine, but missing a signed-off-by line.

Quoted 30 lines
---
 .../devicetree/bindings/iio/adc/ti-adc128s052.txt      | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt
Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt new file +18 -0
new file mode 100644
index 0000000..c8d682b
@@ -0,0 +1,18 @@
+* Texas Instruments' ADC128S052 ADC chip
+
+Required properties:
+ - compatible: Should be "ti,adc128s052"
+ - reg: spi chip select number for the device
+ - vref-supply: The regulator supply for ADC reference voltage
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+		Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+adc@0 {
+	compatible = "ti,adc128s052";
+	reg = <0>;
+	vref-supply = <&vdd_supply>;
+	spi-max-frequency = <1000000>;
+};