Skip to contentSkip to conversation

HID: hid-lg4ff: Fix "undefined reference" build issue with CONFIG_USB disabled.

PATCH Applied Michal Malý 3 participants 4 messages Feb 18, 2015 HID

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 HID: hid-lg4ff: Fix "undefined reference" build issue with CONFIG_USB disabled.

Fix "undefined reference" build issue with CONFIG_USB disabled.

---
 drivers/hid/hid-lg4ff.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)
drivers/hid/hid-lg4ff.c +9 -8
index 854982b..1232210 100644
@@ -569,19 +569,20 @@ static const struct lg4ff_compat_mode_switch *lg4ff_get_mode_switch_command(cons
 
 static int lg4ff_switch_compatibility_mode(struct hid_device *hid, const struct lg4ff_compat_mode_switch *s)
 {
-	struct usb_device *usbdev = hid_to_usb_dev(hid);
-	struct usbhid_device *usbhid = hid->driver_data;
+	struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
+	__s32 *value = report->field[0]->value;
 	u8 i;
 
 	for (i = 0; i < s->cmd_count; i++) {
-		int xferd, ret;
-		u8 data[7];
+		u8 j;
 
-		memcpy(data, s->cmd + (7*i), 7);
-		ret = usb_interrupt_msg(usbdev, usbhid->urbout->pipe, data, 7, &xferd, USB_CTRL_SET_TIMEOUT);
-		if (ret)
-			return ret;
+		for (j = 0; j < 7; j++)
+			value[j] = s->cmd[j + (7*i)];
+
+		hid_hw_request(hid, report, HID_REQ_SET_REPORT);
 	}
+	hid_hw_wait(hid);
 	return 0;
 }
 
Signature · 1 line
2.3.0
#1 lore raw
Quoted 1 line

Fix "undefined reference" build issue with CONFIG_USB disabled.

Just a newbie question... for a family of devices (the wheels) which can only be attached via USB, wouldn't the better approach be to fix the dependancy?

Are there any other devices provided for by 'hid-logitech' which use any other transport (HID over Bluetooth or the like)?

Simon.

#2 lore raw
Quoted 8 lines · On Wed, 18 Feb 2015, [email protected] wrote:
Quoted 1 line

Fix "undefined reference" build issue with CONFIG_USB disabled.

Just a newbie question... for a family of devices (the wheels) which can only be attached via USB, wouldn't the better approach be to fix the dependancy?

Are there any other devices provided for by 'hid-logitech' which use any other transport (HID over Bluetooth or the like)?

Using only HID API (and let it call to the transport driver) is much cleaner way and helps a lot with avoiding code duplication, etc.

Signature · 2 lines
Jiri Kosina
SUSE Labs