sunxi: mmc: Always declare High Capacity capability
Subsystems (2)
PATCH 1/2 sunxi: mmc: Always declare High Capacity capability
High Capacity (e)MMC cards work fine on sun4i / sun5i, and not having this capability set causes u-boot to not recognize the eMMC on an Utoo P66 A13 tablet, so always set it thereby fixing this.
--- drivers/mmc/sunxi_mmc.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
drivers/mmc/sunxi_mmc.c +1 -5
@@ -449,11 +449,7 @@ struct mmc *sunxi_mmc_init(int sdc_no) cfg->voltages =MMC_VDD_32_33 |MMC_VDD_33_34 ; cfg->host_caps =MMC_MODE_4BIT ; - cfg->host_caps |= MMC_MODE_HS_52MHz |MMC_MODE_HS ; -#if defined(CONFIG_MACH_SUN6I ) || defined(CONFIG_MACH_SUN7I ) || \ - defined(CONFIG_MACH_SUN8I ) || defined(CONFIG_MACH_SUN9I ) - cfg->host_caps |=MMC_MODE_HC ; -#endif + cfg->host_caps |= MMC_MODE_HS_52MHz |MMC_MODE_HS |MMC_MODE_HC ; cfg->b_max =CONFIG_SYS_MMC_MAX_BLK_COUNT ; cfg->f_min =400000 ;
Signature · 1 line
2.1.0
PATCH 2/2 sunxi: Add support for the UTOO P66 tablet
The UTOO P66 is a 6" A13 tablet / lcd ereader. It features a 6" 480x800 ips lcd screen, 512MB RAM & 4GB emmc.
--- configs/UTOO_P66_defconfig | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 configs/UTOO_P66_defconfig
configs/UTOO_P66_defconfig new file +21 -0
@@ -0,0 +1,21 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +CONFIG_FDTFILE="sun5i-a13-utoo-p66.dtb" +CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB0_VBUS_PIN="PB04" +CONFIG_USB0_VBUS_DET="PG01" +CONFIG_VIDEO_LCD_MODE="x:480,y:800,depth:18,pclk_khz:25000,le:2,ri:93,up:2,lo:93,hs:1,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_DCLK_PHASE=0 +CONFIG_VIDEO_LCD_POWER="PG4" +CONFIG_VIDEO_LCD_RESET="PG11" +CONFIG_VIDEO_LCD_BL_EN="AXP0-1" +CONFIG_VIDEO_LCD_BL_PWM="PB2" +CONFIG_VIDEO_LCD_TL059WV5C0=y ++S:CONFIG_MMC_SUNXI_SLOT_EXTRA=2 ++S:CONFIG_MMC0_CD_PIN="PG0" ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN5I=y ++S:CONFIG_DRAM_CLK=432 ++S:CONFIG_DRAM_ZQ=123 ++S:CONFIG_DRAM_EMR1=0
Signature · 1 line
2.1.0
PATCH 2/2 sunxi: Add support for the UTOO P66 tablet
Quoted 4 lines · Hans de Goede
The UTOO P66 is a 6" A13 tablet / lcd ereader. It features a 6" 480x800 ips lcd screen, 512MB RAM & 4GB emmc.
Signed-off-by Hans de Goede <[email protected]>
PATCH 1/2 sunxi: mmc: Always declare High Capacity capability
In reply to Hans de GoedeQuoted 5 lines · Hans de Goede
High Capacity (e)MMC cards work fine on sun4i / sun5i, and not having this capability set causes u-boot to not recognize the eMMC on an Utoo P66 A13 tablet, so always set it thereby fixing this.
Signed-off-by Hans de Goede <[email protected]>
Pantelis Antoniou
AppliedPATCH 1/2 sunxi: mmc: Always declare High Capacity capability
In reply to Hans de GoedeHi Hans,
Quoted 30 lines · Hans de Goede
High Capacity (e)MMC cards work fine on sun4i / sun5i, and not having this capability set causes u-boot to not recognize the eMMC on an Utoo P66 A13 tablet, so always set it thereby fixing this.
Signed-off-by Hans de Goede <[email protected]>---
drivers/mmc/sunxi_mmc.c| 6 +-----1 file changed, 1 insertion(+), 5 deletions(-)drivers/mmc/sunxi_mmc.c +1
-5@@ -449,11 +449,7 @@ struct mmc *sunxi_mmc_init(int sdc_no) cfg->voltages =MMC_VDD_32_33 |MMC_VDD_33_34 ; cfg->host_caps =MMC_MODE_4BIT ; - cfg->host_caps |= MMC_MODE_HS_52MHz |MMC_MODE_HS ; -#if defined(CONFIG_MACH_SUN6I ) || defined(CONFIG_MACH_SUN7I ) || \ - defined(CONFIG_MACH_SUN8I ) || defined(CONFIG_MACH_SUN9I ) - cfg->host_caps |=MMC_MODE_HC ; -#endif + cfg->host_caps |= MMC_MODE_HS_52MHz |MMC_MODE_HS |MMC_MODE_HC ; cfg->b_max =CONFIG_SYS_MMC_MAX_BLK_COUNT ; cfg->f_min =400000 ;Signature · 1 line
2.1.0
Thanks, applied.
? Pantelis
PATCH 1/2 sunxi: mmc: Always declare High Capacity capability
Hi,
Quoted 29 lines · Pantelis Antoniou
Hi Hans,
Quoted 27 lines · Hans de Goede
High Capacity (e)MMC cards work fine on sun4i / sun5i, and not having this capability set causes u-boot to not recognize the eMMC on an Utoo P66 A13 tablet, so always set it thereby fixing this.
Signed-off-by Hans de Goede <[email protected]>---
drivers/mmc/sunxi_mmc.c| 6 +-----1 file changed, 1 insertion(+), 5 deletions(-)drivers/mmc/sunxi_mmc.c +1
-5@@ -449,11 +449,7 @@ struct mmc *sunxi_mmc_init(int sdc_no) cfg->voltages =MMC_VDD_32_33 |MMC_VDD_33_34 ; cfg->host_caps =MMC_MODE_4BIT ; - cfg->host_caps |= MMC_MODE_HS_52MHz |MMC_MODE_HS ; -#if defined(CONFIG_MACH_SUN6I ) || defined(CONFIG_MACH_SUN7I ) || \ - defined(CONFIG_MACH_SUN8I ) || defined(CONFIG_MACH_SUN9I ) - cfg->host_caps |=MMC_MODE_HC ; -#endif + cfg->host_caps |= MMC_MODE_HS_52MHz |MMC_MODE_HS |MMC_MODE_HC ; cfg->b_max =CONFIG_SYS_MMC_MAX_BLK_COUNT ;
Quoted 5 lines
Quoted 3 lines
drivers/mmc/sunxi_mmc.c +0
-1cfg->f_min =400000 ; --2.1.0
Thanks, applied.
Thanks, but since this was touching only sunxi code this has already been merged through the sunxi tree, if you rebase on the latest master this should drop from your tree.
Regards,
Hans
PATCH 1/2 sunxi: mmc: Always declare High Capacity capability
Hi,
Quoted 38 lines · Hans de Goede
Hi,
Quoted 29 lines · Pantelis Antoniou
Hi Hans,
Quoted 27 lines · Hans de Goede
High Capacity (e)MMC cards work fine on sun4i / sun5i, and not having this capability set causes u-boot to not recognize the eMMC on an Utoo P66 A13 tablet, so always set it thereby fixing this.
Signed-off-by Hans de Goede <[email protected]>---
drivers/mmc/sunxi_mmc.c| 6 +-----1 file changed, 1 insertion(+), 5 deletions(-)drivers/mmc/sunxi_mmc.c +1
-5@@ -449,11 +449,7 @@ struct mmc *sunxi_mmc_init(int sdc_no) cfg->voltages =MMC_VDD_32_33 |MMC_VDD_33_34 ; cfg->host_caps =MMC_MODE_4BIT ; - cfg->host_caps |= MMC_MODE_HS_52MHz |MMC_MODE_HS ; -#if defined(CONFIG_MACH_SUN6I ) || defined(CONFIG_MACH_SUN7I ) || \ - defined(CONFIG_MACH_SUN8I ) || defined(CONFIG_MACH_SUN9I ) - cfg->host_caps |=MMC_MODE_HC ; -#endif + cfg->host_caps |= MMC_MODE_HS_52MHz |MMC_MODE_HS |MMC_MODE_HC ; cfg->b_max =CONFIG_SYS_MMC_MAX_BLK_COUNT ;Quoted 5 lines
Quoted 3 lines
drivers/mmc/sunxi_mmc.c +0
-1cfg->f_min =400000 ; --2.1.0
Thanks, applied.
Quoted 3 lines
Thanks, but since this was touching only sunxi code this has already been merged through the sunxi tree, if you rebase on the latest master this should drop from your tree.
Ah I see that Tom has already pulled from your tree too, so now the patch is upstream through both pulls, which git handles without problems, so we're good here.
Regards,
Hans