Skip to contentSkip to conversation

corrupted double-linked list error on exit

Powertop Alexandra Yates 3 participants 4 messages Feb 20, 2015 – Feb 24, 2015 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Alexandra Yates

author
#1 lore raw
Quoted 21 lines
Quoted 21 lines

I'm seeing the same issue on 3.18.6-1-ARCH.

[samer(a)archbox ~]$ sudo powertop --auto-tune
Loaded 34 prior measurements
Cannot load from file /var/cache/powertop/saved_parameters.powertop RAPL device for cpu 0
RAPL Using PowerCap Sysfs : Domain Mask f
RAPL device for cpu 0
RAPL Using PowerCap Sysfs : Domain Mask f
RAPL device for cpu 0
RAPL Using PowerCap Sysfs : Domain Mask f
Devfreq not enabled
Cannot load from file /var/cache/powertop/saved_parameters.powertop
unknown op '{'
To show power estimates do 263 measurement(s) connected to battery onlyLeaving PowerTOP
*** Error in `powertop': corrupted double-linked list:
0x0000000000fbceb0 ***

Quoted 7 lines
Quoted 7 lines

Any idea what's causing this?

_______________________________________________
PowerTop mailing list
PowerTop(a)lists.01.org
https://lists.01.org/mailman/listinfo/powertop

Hi Samer,

Thank you for reporting this issue. I'm not sure what is causing it. But I'm investigating, meanwhile. Can you give me more details on the platform you are running?

Thank you,
Alexandra.

Thank you,
Alexandra.

#2 lore raw

FYI, I'm also on Arch (I think I started this thread but I can't remember) and the issue has disappeared for me, I believe after updating from 3.18.2 to 3.18.3. Given that it's still appearing for some users it may not actually be related to the kernel, but your guess is as good as mine.

-alex

Quoted 48 lines · Alexandra Yates
Quoted 21 lines
Quoted 21 lines

I'm seeing the same issue on 3.18.6-1-ARCH.

[samer(a)archbox ~]$ sudo powertop --auto-tune
Loaded 34 prior measurements
Cannot load from file /var/cache/powertop/saved_parameters.powertop RAPL device for cpu 0
RAPL Using PowerCap Sysfs : Domain Mask f
RAPL device for cpu 0
RAPL Using PowerCap Sysfs : Domain Mask f
RAPL device for cpu 0
RAPL Using PowerCap Sysfs : Domain Mask f
Devfreq not enabled
Cannot load from file /var/cache/powertop/saved_parameters.powertop
unknown op '{'
To show power estimates do 263 measurement(s) connected to battery onlyLeaving PowerTOP
*** Error in `powertop': corrupted double-linked list:
0x0000000000fbceb0 ***

Quoted 7 lines
Quoted 7 lines

Any idea what's causing this?

_______________________________________________
PowerTop mailing list
PowerTop(a)lists.01.org
https://lists.01.org/mailman/listinfo/powertop

Hi Samer,

Thank you for reporting this issue. I'm not sure what is causing it.
But
I'm investigating, meanwhile. Can you give me more details on the platform
you are running?

Thank you,
Alexandra.

Thank you,
Alexandra.
_______________________________________________
PowerTop mailing list
PowerTop(a)lists.01.org
https://lists.01.org/mailman/listinfo/powertop

#3 lore raw

Hi,

I'm running on a Dell XPS 15 9530. The issue went away after I compiled powertop from source, so I'm not sure where to go from there.

-samer

Quoted 60 lines · Alex

FYI, I'm also on Arch (I think I started this thread but I can't remember) and the issue has disappeared for me, I believe after updating from 3.18.2 to 3.18.3. Given that it's still appearing for some users it may not actually be related to the kernel, but your guess is as good as mine.

-alex

Quoted 50 lines · Alexandra Yates
Quoted 23 lines
Quoted 23 lines

I'm seeing the same issue on 3.18.6-1-ARCH.

[samer(a)archbox ~]$ sudo powertop --auto-tune
Loaded 34 prior measurements
Cannot load from file
/var/cache/powertop/saved_parameters.powertop
RAPL device for cpu 0
RAPL Using PowerCap Sysfs : Domain Mask f
RAPL device for cpu 0
RAPL Using PowerCap Sysfs : Domain Mask f
RAPL device for cpu 0
RAPL Using PowerCap Sysfs : Domain Mask f
Devfreq not enabled
Cannot load from file
/var/cache/powertop/saved_parameters.powertop
unknown op '{'
To show power estimates do 263 measurement(s) connected to battery onlyLeaving PowerTOP
*** Error in `powertop': corrupted double-linked list:
0x0000000000fbceb0 ***

Quoted 7 lines
Quoted 7 lines

Any idea what's causing this?

_______________________________________________
PowerTop mailing list
PowerTop(a)lists.01.org
https://lists.01.org/mailman/listinfo/powertop

Hi Samer,

Thank you for reporting this issue. I'm not sure what is causing it. But
I'm investigating, meanwhile. Can you give me more details on the platform
you are running?

Thank you,
Alexandra.

Thank you,
Alexandra.
_______________________________________________
PowerTop mailing list
PowerTop(a)lists.01.org
https://lists.01.org/mailman/listinfo/powertop

author
#4 lore raw
Quoted 70 lines

Hi,

I'm running on a Dell XPS 15 9530. The issue went away after I compiled powertop from source, so I'm not sure where to go from there.

-samer

Quoted 60 lines · Alex

FYI, I'm also on Arch (I think I started this thread but I can't remember) and the issue has disappeared for me, I believe after updating from 3.18.2 to 3.18.3. Given that it's still appearing for some users it may not actually be related to the kernel, but your guess is as good as mine.

-alex

Quoted 50 lines · Alexandra Yates
Quoted 23 lines
Quoted 23 lines

I'm seeing the same issue on 3.18.6-1-ARCH.

[samer(a)archbox ~]$ sudo powertop --auto-tune
Loaded 34 prior measurements
Cannot load from file
/var/cache/powertop/saved_parameters.powertop
RAPL device for cpu 0
RAPL Using PowerCap Sysfs : Domain Mask f
RAPL device for cpu 0
RAPL Using PowerCap Sysfs : Domain Mask f
RAPL device for cpu 0
RAPL Using PowerCap Sysfs : Domain Mask f
Devfreq not enabled
Cannot load from file
/var/cache/powertop/saved_parameters.powertop
unknown op '{'
To show power estimates do 263 measurement(s) connected to battery onlyLeaving PowerTOP
*** Error in `powertop': corrupted double-linked list:
0x0000000000fbceb0 ***

Quoted 7 lines
Quoted 7 lines

Any idea what's causing this?

_______________________________________________
PowerTop mailing list
PowerTop(a)lists.01.org
https://lists.01.org/mailman/listinfo/powertop

Hi Samer,

Thank you for reporting this issue. I'm not sure what is causing it. But
I'm investigating, meanwhile. Can you give me more details on the platform
you are running?

Thank you,
Alexandra.

Thank you,
Alexandra.
_______________________________________________
PowerTop mailing list
PowerTop(a)lists.01.org
https://lists.01.org/mailman/listinfo/powertop

Mhh it may be an optimization error that appears only on the release.

Thank you,
Alexandra.