Skip to contentSkip to conversation

drm/i915/skl: Add support for SKL background color

PATCH In review Chandra Konduru 3 participants 7 messages Feb 21, 2015 – May 6, 2015

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v9 1/1 drm/i915/skl: Add support for SKL background color

This patch adds support for Skylake display pipe background color.

v2:
- added property documentation to drm DocBook (Daniel Vetter)
- moved property to drm_mode_config (Daniel Vetter)
- change to set property to NULL once it is freed. (me)
- change to make sure gamma/csc settings were retained during color change (me)
- change to make sure background color is restored after a power event (me)

v3:
- change to add gen check before writing background color (Matt Roper)

v4:
- change to increase color from 8bpc to 16bpc (Daniel Vetter)

v5:
- removed initialization of background color to 0 (Damien Lespiau)
- added change log to commit message (Damien Lespiau)

v6:
- optmization to use _PIPE() (Damien Lespiau)
- updated max limit value in DocBook (Damien Lespiau)
- simplied color conversion equation (Damien Lespiau)
- always enable gamma and csc to align with update plane (Damien Lespiau)
- move resume restoration code to haswell_crtc_enable (Damien Lespiau)

v7:
- remove superfluous comments (Damien)
- remove unused variables left over between v5 and v6 (Damien)

v8:
- remove the destruction of the property, DRM core does that for us (Damien)

v9:
- add ULL to a 64bits constant

---
 Documentation/DocBook/drm.tmpl       |   10 ++++++-
 drivers/gpu/drm/i915/i915_reg.h      |   10 +++++++
 drivers/gpu/drm/i915/intel_display.c |   54 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_drv.h     |    2 ++
 include/drm/drm_crtc.h               |    3 ++
 5 files changed, 78 insertions(+), 1 deletion(-)
Documentation/DocBook/drm.tmpl +9 -1
index 249f0c9..c83ffe6 100644
@@ -2834,7 +2834,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="21" valign="top" >i915</td>
+	<td rowspan="22" valign="top" >i915</td>
 	<td rowspan="2" valign="top" >Generic</td>
 	<td valign="top" >"Broadcast RGB"</td>
 	<td valign="top" >ENUM</td>
@@ -2858,6 +2858,14 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
+	<td rowspan="1" valign="top" >CRTC</td>
+	<td valign="top" >“background_color”</td>
+	<td valign="top" >Range</td>
+	<td valign="top" >Min=0, Max=0xFFFFFFFFFFFF</td>
+	<td valign="top" >CRTC</td>
+	<td valign="top" >Background color in 16bpc BGR (B-MSB, R-LSB)</td>
+	</tr>
+	<tr>
 	<td rowspan="17" valign="top" >SDVO-TV</td>
 	<td valign="top" >“mode”</td>
 	<td valign="top" >ENUM</td>
drivers/gpu/drm/i915/i915_reg.h +10 -0
index 040cd83..2d7a9f5 100644
@@ -6758,6 +6758,16 @@ enum skl_disp_power_wells {
 #define PIPE_CSC_POSTOFF_ME(pipe) _PIPE(pipe, _PIPE_A_CSC_POSTOFF_ME, _PIPE_B_CSC_POSTOFF_ME)
 #define PIPE_CSC_POSTOFF_LO(pipe) _PIPE(pipe, _PIPE_A_CSC_POSTOFF_LO, _PIPE_B_CSC_POSTOFF_LO)
 
+/* Skylake pipe bottom color */
+#define _PIPE_BOTTOM_COLOR_A        0x70034
+#define _PIPE_BOTTOM_COLOR_B        0x71034
+#define _PIPE_BOTTOM_COLOR_C        0x72034
+#define PIPE_BOTTOM_GAMMA_ENABLE   (1 << 31)
+#define PIPE_BOTTOM_CSC_ENABLE     (1 << 30)
+#define PIPE_BOTTOM_COLOR_MASK     0x3FFFFFFF
+#define PIPE_BOTTOM_COLOR(pipe) \
+	_PIPE(pipe, _PIPE_BOTTOM_COLOR_A, _PIPE_BOTTOM_COLOR_B)
+
 /* MIPI DSI registers */
 
 #define _MIPI_PORT(port, a, c)	_PORT3(port, a, 0, c)	/* ports A and C only */
drivers/gpu/drm/i915/intel_display.c +54 -0

84 lines not on this page · raw message

drivers/gpu/drm/i915/intel_drv.h +2 -0
index 1de8e20..285f908 100644
@@ -493,6 +493,8 @@ struct intel_crtc {
 	struct intel_mmio_flip mmio_flip;
 
 	struct intel_crtc_atomic_commit atomic;
+
+	uint32_t background_color;
 };
 
 struct intel_plane_wm_parameters {
include/drm/drm_crtc.h +3 -0
index b1465d6..5f8c80a 100644
@@ -1122,6 +1122,9 @@ struct drm_mode_config {
 	struct drm_property *prop_crtc_id;
 	struct drm_property *prop_active;
 
+	/* crtc properties */
+	struct drm_property *background_color_property;
+
 	/* DVI-I properties */
 	struct drm_property *dvi_i_subconnector_property;
 	struct drm_property *dvi_i_select_subconnector_property;
Signature · 6 lines
1.7.9.5

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

drivers/gpu/drm/i915/intel_display.c static const struct drm_crtc_funcs intel_crtc_funcs = { · line 11703

Quoted 5 lines · Chandra Konduru
drivers/gpu/drm/i915/intel_display.c +1 -0
@@ -11660,6 +11700,7 @@ static const struct drm_crtc_funcs intel_crtc_funcs = {
 	.page_flip = intel_crtc_page_flip,
 	.atomic_duplicate_state = intel_crtc_duplicate_state,
 	.atomic_destroy_state = intel_crtc_destroy_state,
+	.set_property = intel_crtc_set_property,

So in my internals mail about whether atomic blocks this I've missed that atm we can't do any atomic crtc properties. And I really don't want to slow down the atomic conversion by piling up more legacy cruft first, so I think properties on the crtc like this one will get stalled a bit despite what I've claimed.

I guess we need to discuss this in our mtg tomorrow. -Daniel

Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw
In reply to Chandra Konduru
Quoted 61 lines · Chandra Konduru

This patch adds support for Skylake display pipe background color.

v2:
- added property documentation to drm DocBook (Daniel Vetter)
- moved property to drm_mode_config (Daniel Vetter)
- change to set property to NULL once it is freed. (me)
- change to make sure gamma/csc settings were retained during color change (me)
- change to make sure background color is restored after a power event (me)

v3:
- change to add gen check before writing background color (Matt Roper)

v4:
- change to increase color from 8bpc to 16bpc (Daniel Vetter)

v5:
- removed initialization of background color to 0 (Damien Lespiau)
- added change log to commit message (Damien Lespiau)

v6:
- optmization to use _PIPE() (Damien Lespiau)
- updated max limit value in DocBook (Damien Lespiau)
- simplied color conversion equation (Damien Lespiau)
- always enable gamma and csc to align with update plane (Damien Lespiau)
- move resume restoration code to haswell_crtc_enable (Damien Lespiau)

v7:
- remove superfluous comments (Damien)
- remove unused variables left over between v5 and v6 (Damien)

v8:
- remove the destruction of the property, DRM core does that for us (Damien)

v9:
- add ULL to a 64bits constant

---
 Documentation/DocBook/drm.tmpl       |   10 ++++++-
 drivers/gpu/drm/i915/i915_reg.h      |   10 +++++++
 drivers/gpu/drm/i915/intel_display.c |   54 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_drv.h     |    2 ++
 include/drm/drm_crtc.h               |    3 ++
 5 files changed, 78 insertions(+), 1 deletion(-)
Documentation/DocBook/drm.tmpl +1 -1
index 249f0c9..c83ffe6 100644
@@ -2834,7 +2834,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="21" valign="top" >i915</td>
+	<td rowspan="22" valign="top" >i915</td>
 	<td rowspan="2" valign="top" >Generic</td>
 	<td valign="top" >"Broadcast RGB"</td>
 	<td valign="top" >ENUM</td>

Documentation/DocBook/drm.tmpl void intel_crt_init(struct drm_device *dev) · line 2866

Quoted 9 lines
Documentation/DocBook/drm.tmpl +6 -0
@@ -2858,6 +2858,14 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
+	<td rowspan="1" valign="top" >CRTC</td>
+	<td valign="top" >“background_color”</td>
+	<td valign="top" >Range</td>
+	<td valign="top" >Min=0, Max=0xFFFFFFFFFFFF</td>
+	<td valign="top" >CRTC</td>
+	<td valign="top" >Background color in 16bpc BGR (B-MSB, R-LSB)</td>

I'd prefer to settle on ARGB msb->lsb layout, unless there's already precedent for something else. I think it's the most common component order around, and so should result in least amount of code to stuff the bits into the hardware registers.

Quoted 153 lines
Documentation/DocBook/drm.tmpl +2 -0
+	</tr>
+	<tr>
 	<td rowspan="17" valign="top" >SDVO-TV</td>
 	<td valign="top" >“mode”</td>
 	<td valign="top" >ENUM</td>
drivers/gpu/drm/i915/i915_reg.h +10 -0
index 040cd83..2d7a9f5 100644
@@ -6758,6 +6758,16 @@ enum skl_disp_power_wells {
 #define PIPE_CSC_POSTOFF_ME(pipe) _PIPE(pipe, _PIPE_A_CSC_POSTOFF_ME, _PIPE_B_CSC_POSTOFF_ME)
 #define PIPE_CSC_POSTOFF_LO(pipe) _PIPE(pipe, _PIPE_A_CSC_POSTOFF_LO, _PIPE_B_CSC_POSTOFF_LO)
 
+/* Skylake pipe bottom color */
+#define _PIPE_BOTTOM_COLOR_A        0x70034
+#define _PIPE_BOTTOM_COLOR_B        0x71034
+#define _PIPE_BOTTOM_COLOR_C        0x72034
+#define PIPE_BOTTOM_GAMMA_ENABLE   (1 << 31)
+#define PIPE_BOTTOM_CSC_ENABLE     (1 << 30)
+#define PIPE_BOTTOM_COLOR_MASK     0x3FFFFFFF
+#define PIPE_BOTTOM_COLOR(pipe) \
+	_PIPE(pipe, _PIPE_BOTTOM_COLOR_A, _PIPE_BOTTOM_COLOR_B)
+
 /* MIPI DSI registers */
 
 #define _MIPI_PORT(port, a, c)	_PORT3(port, a, 0, c)	/* ports A and C only */
drivers/gpu/drm/i915/intel_display.c +54 -0
index 3b0fe9f..4dc5cb2 100644
@@ -4413,6 +4413,20 @@ static void haswell_mode_set_planes_workaround(struct intel_crtc *crtc)
 	intel_wait_for_vblank(dev, other_active_crtc->pipe);
 }
 
+static void skl_crtc_set_background_color(struct intel_crtc *intel_crtc)
+{
+	struct drm_device *dev = intel_crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (INTEL_INFO(dev)->gen < 9)
+		return;
+
+	I915_WRITE(PIPE_BOTTOM_COLOR(intel_crtc->pipe),
+		intel_crtc->background_color |
+		PIPE_BOTTOM_GAMMA_ENABLE |
+		PIPE_BOTTOM_CSC_ENABLE);
+}
+
 static void haswell_crtc_enable(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
@@ -4474,6 +4488,8 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 	 */
 	intel_crtc_load_lut(crtc);
 
+	skl_crtc_set_background_color(intel_crtc);
+
 	intel_ddi_set_pipe_settings(crtc);
 	intel_ddi_enable_transcoder_func(crtc);
 
@@ -9882,6 +9898,30 @@ out_hang:
 	return ret;
 }
 
+static int intel_crtc_set_property(struct drm_crtc *crtc,
+	struct drm_property *property, uint64_t val)
+{
+	struct drm_device *dev = crtc->dev;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int i;
+
+	if (INTEL_INFO(dev)->gen >= 9) {
+		if (property == dev->mode_config.background_color_property) {
+			uint64_t bottom = 0;
+
+			/* BGR 16bpc ==> RGB 10bpc */
+			for (i = 0; i < 3; i++)
+				bottom |= (((val >> (i * 16 + 6)) & 0x3FF) << ((2 - i) * 10));
+
+			intel_crtc->background_color = (uint32_t) bottom;
+
+			skl_crtc_set_background_color(intel_crtc);
+		}
+		return 0;
+	}
+	return -EINVAL;
+}
+
 static struct drm_crtc_helper_funcs intel_helper_funcs = {
 	.mode_set_base_atomic = intel_pipe_set_base_atomic,
 	.load_lut = intel_crtc_load_lut,
@@ -11660,6 +11700,7 @@ static const struct drm_crtc_funcs intel_crtc_funcs = {
 	.page_flip = intel_crtc_page_flip,
 	.atomic_duplicate_state = intel_crtc_duplicate_state,
 	.atomic_destroy_state = intel_crtc_destroy_state,
+	.set_property = intel_crtc_set_property,
 };
 
 static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv,
@@ -12341,6 +12382,19 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 	drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
 
 	WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
+
+	/* background color = 48 bit quantity: MSB BGR 16bpc LSB */
+	if (INTEL_INFO(dev)->gen >= 9 &&
+		!dev->mode_config.background_color_property)
+		dev->mode_config.background_color_property =
+			drm_property_create_range(dev, 0, "background_color", 0,
+				0xFFFFFFFFFFFFULL);
+
+	if (dev->mode_config.background_color_property)
+		drm_object_attach_property(&intel_crtc->base.base,
+			dev->mode_config.background_color_property,
+			intel_crtc->background_color);
+
 	return;
 
 fail:
drivers/gpu/drm/i915/intel_drv.h +2 -0
index 1de8e20..285f908 100644
@@ -493,6 +493,8 @@ struct intel_crtc {
 	struct intel_mmio_flip mmio_flip;
 
 	struct intel_crtc_atomic_commit atomic;
+
+	uint32_t background_color;
 };
 
 struct intel_plane_wm_parameters {
include/drm/drm_crtc.h +3 -0
index b1465d6..5f8c80a 100644
@@ -1122,6 +1122,9 @@ struct drm_mode_config {
 	struct drm_property *prop_crtc_id;
 	struct drm_property *prop_active;
 
+	/* crtc properties */
+	struct drm_property *background_color_property;
+
 	/* DVI-I properties */
 	struct drm_property *dvi_i_subconnector_property;
 	struct drm_property *dvi_i_select_subconnector_property;
Signature · 6 lines
1.7.9.5

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw
Quoted 11 lines

-----Original Message-----
From: Ville Syrjälä [mailto:[email protected]]
Sent: Monday, April 27, 2015 8:28 AM

Documentation/DocBook/drm.tmpl void intel_crt_init(struct drm_device *dev) · line 2866

Quoted 2 lines · Chandra Konduru

This patch adds support for Skylake display pipe background color.

Documentation/DocBook/drm.tmpl +1 -0
+	<td valign="top" >Background color in 16bpc BGR (B-MSB, R-LSB)</td>

I'd prefer to settle on ARGB msb->lsb layout, unless there's already precedent for something else. I think it's the most common component order around, and so should result in least amount of code to stuff the bits into the hardware registers.

To give some background on this, initially using ARGB msb->lsb layout to stuff bit into hw regs, but changed to BGR msb->lsb per feedback. Before reversing/ respunning, would like to have an agreement. Daniel/Damien, are you ok with reversing the order to align with hw? Or just keep the way current patch doing?

Quoted 16 lines

drivers/gpu/drm/i915/intel_display.c out_hang:

Quoted 9 lines
drivers/gpu/drm/i915/intel_display.c +8 -0
+static int intel_crtc_set_property(struct drm_crtc *crtc,
+	struct drm_property *property, uint64_t val) {
+	struct drm_device *dev = crtc->dev;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int i;
+
+	if (INTEL_INFO(dev)->gen >= 9) {
+		if (property == dev->mode_config.background_color_property)

{

drivers/gpu/drm/i915/intel_display.c out_hang:

Quoted 5 lines
drivers/gpu/drm/i915/intel_display.c +5 -0
+			uint64_t bottom = 0;
+
+			/* BGR 16bpc ==> RGB 10bpc */
+			for (i = 0; i < 3; i++)
+				bottom |= (((val >> (i * 16 + 6)) & 0x3FF) << ((2 -

i) * 10));

Quoted 9 lines

drivers/gpu/drm/i915/intel_display.c out_hang: · line 9923

Quoted 9 lines
drivers/gpu/drm/i915/intel_display.c +9 -0
+
+			intel_crtc->background_color = (uint32_t) bottom;
+
+			skl_crtc_set_background_color(intel_crtc);
+		}
+		return 0;
+	}
+	return -EINVAL;
+}

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

#4 lore raw
Quoted 12 lines · Chandra
Quoted 11 lines

-----Original Message-----
From: Ville Syrjälä [mailto:[email protected]]
Sent: Monday, April 27, 2015 8:28 AM

Documentation/DocBook/drm.tmpl void intel_crt_init(struct drm_device *dev) · line 2866

Quoted 2 lines · Chandra Konduru

This patch adds support for Skylake display pipe background color.

Documentation/DocBook/drm.tmpl +1 -0
+	<td valign="top" >Background color in 16bpc BGR (B-MSB, R-LSB)</td>

I'd prefer to settle on ARGB msb->lsb layout, unless there's already precedent for something else. I think it's the most common component order around, and so should result in least amount of code to stuff the bits into the hardware registers.

Quoted 4 lines

To give some background on this, initially using ARGB msb->lsb layout to stuff bit into hw regs, but changed to BGR msb->lsb per feedback. Before reversing/ respunning, would like to have an agreement. Daniel/Damien, are you ok with reversing the order to align with hw? Or just keep the way current patch doing?

Imo if we want to really end up with a real standard we should have a macro to encode ARGB values and 4 macros to extract the individual parts in some uapi header and use that instead of open-coding shifts. That would need to be a drm core header ofc. The exact layout is probably irrelevant anyway.
-Daniel

Quoted 31 lines
Quoted 17 lines

drivers/gpu/drm/i915/intel_display.c out_hang:

Quoted 10 lines
drivers/gpu/drm/i915/intel_display.c +8 -0
+static int intel_crtc_set_property(struct drm_crtc *crtc,
+	struct drm_property *property, uint64_t val) {
+	struct drm_device *dev = crtc->dev;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int i;
+
+	if (INTEL_INFO(dev)->gen >= 9) {
+		if (property == dev->mode_config.background_color_property)

{

drivers/gpu/drm/i915/intel_display.c out_hang:

Quoted 5 lines
drivers/gpu/drm/i915/intel_display.c +5 -0
+			uint64_t bottom = 0;
+
+			/* BGR 16bpc ==> RGB 10bpc */
+			for (i = 0; i < 3; i++)
+				bottom |= (((val >> (i * 16 + 6)) & 0x3FF) << ((2 -

i) * 10));

Quoted 9 lines

drivers/gpu/drm/i915/intel_display.c out_hang: · line 9923

Quoted 9 lines
drivers/gpu/drm/i915/intel_display.c +9 -0
+
+			intel_crtc->background_color = (uint32_t) bottom;
+
+			skl_crtc_set_background_color(intel_crtc);
+		}
+		return 0;
+	}
+	return -EINVAL;
+}

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw
Quoted 18 lines · Daniel Vetter
Quoted 12 lines · Chandra
Quoted 11 lines

-----Original Message-----
From: Ville Syrjälä [mailto:[email protected]]
Sent: Monday, April 27, 2015 8:28 AM

Documentation/DocBook/drm.tmpl void intel_crt_init(struct drm_device *dev) · line 2866

Quoted 2 lines · Chandra Konduru

This patch adds support for Skylake display pipe background color.

Documentation/DocBook/drm.tmpl +1 -0
+	<td valign="top" >Background color in 16bpc BGR (B-MSB, R-LSB)</td>

I'd prefer to settle on ARGB msb->lsb layout, unless there's already precedent for something else. I think it's the most common component order around, and so should result in least amount of code to stuff the bits into the hardware registers.

Quoted 4 lines

To give some background on this, initially using ARGB msb->lsb layout to stuff bit into hw regs, but changed to BGR msb->lsb per feedback. Before reversing/ respunning, would like to have an agreement. Daniel/Damien, are you ok with reversing the order to align with hw? Or just keep the way current patch doing?

Quoted 4 lines

Imo if we want to really end up with a real standard we should have a macro to encode ARGB values and 4 macros to extract the individual parts in some uapi header and use that instead of open-coding shifts. That would need to be a drm core header ofc.

Sounds like a decent idea.

Quoted 2 lines

The exact layout is probably irrelevant
anyway.

I think going with (A)RGB makes it much easier to parse when you're looking at the hex string. That's the order those things usually come in.

Which brings another point to mind. Should we define a new property type for color data? Would make it easier to pretty-print in userland. Using decimal for color data isn't very useful after all.

Quoted 38 lines

-Daniel

Quoted 31 lines
Quoted 17 lines

drivers/gpu/drm/i915/intel_display.c out_hang:

Quoted 10 lines
drivers/gpu/drm/i915/intel_display.c +8 -0
+static int intel_crtc_set_property(struct drm_crtc *crtc,
+	struct drm_property *property, uint64_t val) {
+	struct drm_device *dev = crtc->dev;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int i;
+
+	if (INTEL_INFO(dev)->gen >= 9) {
+		if (property == dev->mode_config.background_color_property)

{

drivers/gpu/drm/i915/intel_display.c out_hang:

Quoted 5 lines
drivers/gpu/drm/i915/intel_display.c +5 -0
+			uint64_t bottom = 0;
+
+			/* BGR 16bpc ==> RGB 10bpc */
+			for (i = 0; i < 3; i++)
+				bottom |= (((val >> (i * 16 + 6)) & 0x3FF) << ((2 -

i) * 10));

Quoted 9 lines

drivers/gpu/drm/i915/intel_display.c out_hang: · line 9923

Quoted 9 lines
drivers/gpu/drm/i915/intel_display.c +9 -0
+
+			intel_crtc->background_color = (uint32_t) bottom;
+
+			skl_crtc_set_background_color(intel_crtc);
+		}
+		return 0;
+	}
+	return -EINVAL;
+}

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw
Quoted 3 lines · Ville Syrjälä

Which brings another point to mind. Should we define a new property type for color data? Would make it easier to pretty-print in userland. Using decimal for color data isn't very useful after all.

Maybe a hex type might be useful, but not even sure about that one. I'd expect a proliferation of various types if we go as fine-grained as color at least.
-Daniel

Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx