Skip to contentSkip to conversation

sigrok fixes and pulseview package

PATCH New Bartosz Golaszewski 2 participants 4 messages Feb 23, 2015

lore
Share & tools
lore
#0 lore raw

v2 cover sigrok fixes and pulseview package

Thomas Petazzoni <[email protected]>:

Quoted 11 lines

I am not really happy with this, because there are potentially plenty of external toolchains that support C++11. So I believe we really need to go ahead and add a:

        BR2_TOOLCHAIN_HAS_CXX11

And make sure it gets properly selected depending on whether the toolchain has C++11 support or not. You can look at how BR2_TOOLCHAIN_HAS_SSP or BR2_TOOLCHAIN_HAS_THREADS are implemented for example.

Quoted 6 lines

Moreover, you make this apparently depend on the selected C library. But isn't C++11 support purely a gcc problem ?

Thanks,

Thomas

Frankly I no longer know what the problem was. I'd swear libsigrok configure was failing after not passing some C++11 support tests until I switched to glibc, so I thought uClibc might not implement some features C++11 requires. But today I ran a clean build against uClibc and it compiled fine - both libsigrokcxx and pulseview.

So as much as you're right about BR2_TOOLCHAIN_HAS_CXX11 I would like to propose merging these two patches in which I removed (E)GLIBC dependencies.

Both patches have been rebased against buildroot-next. Tested on a BeagleBone Black with enlightenment window manager via vncviewer.

Best regards,
Bartosz Golaszewski

Bartosz Golaszewski (2):
libsigrok: enable building C++ bindings
pulseview: new package

 package/Config.in              |  1 +
 package/libsigrok/Config.in    | 12 ++++++++++++
 package/libsigrok/libsigrok.mk |  9 ++++++++-
 package/pulseview/Config.in    | 28 ++++++++++++++++++++++++++++
 package/pulseview/pulseview.mk | 24 ++++++++++++++++++++++++
 5 files changed, 73 insertions(+), 1 deletion(-)
 create mode 100644 package/pulseview/Config.in
 create mode 100644 package/pulseview/pulseview.mk
Signature · 1 line
2.1.4
#1 lore raw

PATCH v2 1/2 libsigrok: enable building C++ bindings

---
 package/libsigrok/Config.in    | 12 ++++++++++++
 package/libsigrok/libsigrok.mk |  9 ++++++++-
 2 files changed, 20 insertions(+), 1 deletion(-)
package/libsigrok/Config.in +12 -0
index 47f812c..468c8bc 100644
@@ -16,6 +16,18 @@ config BR2_PACKAGE_LIBSIGROK
 
 	  http://sigrok.org/wiki/Libsigrok
 
+config BR2_PACKAGE_LIBSIGROKCXX
+	bool "build C++ bindings"
+	select BR2_PACKAGE_GLIBMM
+	depends on BR2_PACKAGE_LIBSIGROK
+	depends on BR2_TOOLCHAIN_BUILDROOT_CXX
+	help
+	  Build libsigrok C++ bindings as well.
+
 comment "libsigrok needs a toolchain w/ wchar, threads"
 	depends on BR2_USE_MMU
 	depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
+
+comment "libsigrokcxx needs a toolchain w/ C++"
+	depends on BR2_PACKAGE_LIBSIGROK
+	depends on !BR2_TOOLCHAIN_BUILDROOT_CXX
package/libsigrok/libsigrok.mk +8 -1
index 6bc210e..1e6080d 100644
@@ -13,7 +13,7 @@ LIBSIGROK_LICENSE_FILES = COPYING
 LIBSIGROK_AUTORECONF = YES
 LIBSIGROK_INSTALL_STAGING = YES
 LIBSIGROK_DEPENDENCIES = libglib2 libzip host-pkgconf
-LIBSIGROK_CONF_OPTS = --disable-bindings --disable-glibtest
+LIBSIGROK_CONF_OPTS = --disable-glibtest --disable-java --disable-python
 
 define LIBSIGROK_ADD_MISSING
 	mkdir -p $(@D)/autostuff
@@ -46,4 +46,11 @@ ifeq ($(BR2_PACKAGE_GLIBMM),y)
 LIBSIGROK_DEPENDENCIES += glibmm
 endif
 
+ifeq ($(BR2_PACKAGE_LIBSIGROKCXX),y)
+LIBSIGROK_CONF_OPTS += --enable-cxx
+LIBSIGROK_DEPENDENCIES += host-autoconf-archive glibmm
+else
+LIBSIGROK_CONF_OPTS += --disable-cxx
+endif
+
 $(eval $(autotools-package))
Signature · 1 line
2.1.4
#2 lore raw

PATCH v2 1/2 libsigrok: enable building C++ bindings

Dear Bartosz Golaszewski,

package/libsigrok/Config.in config BR2_PACKAGE_LIBSIGROK · line 23

Quoted 5 lines · Bartosz Golaszewski
package/libsigrok/Config.in +5 -0
+config BR2_PACKAGE_LIBSIGROKCXX
+	bool "build C++ bindings"
+	select BR2_PACKAGE_GLIBMM
+	depends on BR2_PACKAGE_LIBSIGROK
+	depends on BR2_TOOLCHAIN_BUILDROOT_CXX

This should have been BR2_INSTALL_LIBSTDCPP, otherwise your code only works for internal toolchains, not external toolchains.

package/libsigrok/Config.in config BR2_PACKAGE_LIBSIGROK · line 32

Quoted 9 lines
package/libsigrok/Config.in +6 -0
+	help
+	  Build libsigrok C++ bindings as well.
+
 comment "libsigrok needs a toolchain w/ wchar, threads"
 	depends on BR2_USE_MMU
 	depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
+
+comment "libsigrokcxx needs a toolchain w/ C++"
+	depends on BR2_PACKAGE_LIBSIGROK

Instead of repeating this dependency here and in the definition of the BR2_PACKAGE_LIBSIGROKCXX, I've simply placed both under a 'if BR2_PACKAGE_LIBSIGROKCXX ... endif' condition.

Applied to next with those changes.

Thanks!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
#3 lore raw

PATCH v2 2/2 pulseview: new package

In reply to Bartosz Golaszewski
---
 package/Config.in              |  1 +
 package/pulseview/Config.in    | 28 ++++++++++++++++++++++++++++
 package/pulseview/pulseview.mk | 24 ++++++++++++++++++++++++
 3 files changed, 53 insertions(+)
 create mode 100644 package/pulseview/Config.in
 create mode 100644 package/pulseview/pulseview.mk
package/Config.in +1 -0
index 09d49d9..7b118ec 100644
@@ -362,6 +362,7 @@ endif
 	source "package/picocom/Config.in"
 	source "package/pifmrds/Config.in"
 	source "package/pps-tools/Config.in"
+	source "package/pulseview/Config.in"
 	source "package/read-edid/Config.in"
 	source "package/rng-tools/Config.in"
 	source "package/rpi-userland/Config.in"
package/pulseview/Config.in new file +28 -0
new file mode 100644
index 0000000..4428db7
@@ -0,0 +1,28 @@
+config BR2_PACKAGE_PULSEVIEW
+	bool "pulseview"
+	select BR2_PACKAGE_LIBSERIALPORT
+	select BR2_PACKAGE_LIBSIGROK
+	select BR2_PACKAGE_LIBSIGROKCXX
+	depends on BR2_PACKAGE_QT5
+	select BR2_PACKAGE_QT5BASE_WIDGETS
+	select BR2_PACKAGE_QT5SVG
+	select BR2_PACKAGE_BOOST
+	select BR2_PACKAGE_BOOST_FILESYSTEM
+	select BR2_PACKAGE_BOOST_SYSTEM
+	select BR2_PACKAGE_BOOST_THREAD
+	# libsigrok->libglib2:
+	depends on BR2_USE_WCHAR
+	depends on BR2_TOOLCHAIN_HAS_THREADS
+	depends on BR2_USE_MMU
+	depends on BR2_TOOLCHAIN_BUILDROOT_CXX
+	help
+	  PulseView is a Qt based logic analyzer, oscilloscope
+	  and MSO GUI for sigrok.
+
+	  http://sigrok.org/wiki/PulseView
+
+comment "pulseview needs a toolchain w/ wchar, threads, C++"
+	depends on BR2_USE_MMU
+	depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
+	depends on !BR2_PACKAGE_QT5
+	depends on !BR2_TOOLCHAIN_BUILDROOT_CXX
package/pulseview/pulseview.mk new file +24 -0
new file mode 100644
index 0000000..923459d
@@ -0,0 +1,24 @@
+################################################################################
+#
+# pulseview
+#
+################################################################################
+
+# TODO Pulseview can be built and linked against Qt4 as well.
+
+# No https access on upstream git
+PULSEVIEW_SITE = git://sigrok.org/pulseview
+PULSEVIEW_VERSION = 19be0af16af83ca10f7ce69cb64f0b0c6f6a0d81
+PULSEVIEW_LICENSE = GPLv3+
+PULSEVIEW_LICENSE_FILES = COPYING
+PULSEVIEW_DEPENDENCIES = libsigrok qt5base qt5svg boost
+PULSEVIEW_CONF_OPTS = -DDISABLE_WERROR=y
+
+ifeq ($(BR2_PACKAGE_LIBSIGROKDECODE),y)
+PULSEVIEW_CONF_OPTS += -DENABLE_DECODE=TRUE
+PULSEVIEW_DEPENDENCIES += libsigrokdecode
+else
+PULSEVIEW_CONF_OPTS += -DENABLE_DECODE=FALSE
+endif
+
+$(eval $(cmake-package))
Signature · 1 line
2.1.4