Skip to contentSkip to conversation

ARM: phytec-som-am335x: Fix rootfs bootargs

PATCH In review Teresa Gámez 2 participants 6 messages Feb 24, 2015 – Feb 25, 2015 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 ARM: phytec-som-am335x: Fix rootfs bootargs

The roofs is mounted from nand when booting from spi. The VID header offset was set fix to 2048. This is not needed any more. Removed it like it was done for nand.

---
 arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/spi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/spi +1 -1
index a9c0fe8..43a89fe 100644
@@ -6,4 +6,4 @@ global.bootm.oftree="/dev/m25p0.oftree"
 bootargs-ip
 
 # Use rootfs from NAND
-global.linux.bootargs.dyn.root="root=ubi0:root ubi.mtd=nand0.root,2048 rw rootfstype=ubifs"
+global.linux.bootargs.dyn.root="root=ubi0:root ubi.mtd=nand0.root rw rootfstype=ubifs"
Signature · 7 lines
1.9.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#1 lore raw

PATCH 2/3 ARM: am335x_defconfig: Add ext4 support

---
 arch/arm/configs/am335x_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/am335x_defconfig +1 -0
index 0b8f58d..0db2075 100644
@@ -125,6 +125,7 @@ CONFIG_EEPROM_AT24=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_BUS_OMAP_GPMC=y
+CONFIG_FS_EXT4=y
 CONFIG_FS_TFTP=y
 CONFIG_FS_NFS=y
 CONFIG_FS_FAT=y
Signature · 7 lines
1.9.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#2 lore raw

PATCH 3/3 ARM: phytec-som-am335x: Update sd-card rootfs to ext4

In reply to Teresa Gámez

Update rootfs to ext4. ext3 filesystems are still getting mounted.

---
 arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/mmc | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/mmc +1 -1
index 1a642f9..447e471 100644
@@ -5,4 +5,4 @@ global.bootm.oftree=/boot/oftree
 
 bootargs-ip
 
-global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2 rootfstype=ext3 rw rootwait"
+global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait"
Signature · 7 lines
1.9.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#3 lore raw

Re: [For next PATCH 3/3] ARM: phytec-som-am335x: Update sd-card rootfs to ext4

Quoted 12 lines · Teresa Gámez

Update rootfs to ext4. ext3 filesystems are still getting mounted.

---
 arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/mmc | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/mmc +0 -0
index 1a642f9..447e471 100644

arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/mmc global.bootm.oftree=/boot/oftree · line 8

Quoted 5 lines
arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/mmc +1 -1
@@ -5,4 +5,4 @@ global.bootm.oftree=/boot/oftree
 
 bootargs-ip
 
-global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2 rootfstype=ext3 rw rootwait"
+global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait"

Is the rootfstype necessary anyway? It should be automatically detected, no?

Sascha

Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#4 lore raw

Re: [For next PATCH 3/3] ARM: phytec-som-am335x: Update sd-card rootfs to ext4

Am Mittwoch, den 25.02.2015, 08:22 +0100 schrieb Sascha Hauer:

Quoted 14 lines · Teresa Gámez
Quoted 13 lines

Update rootfs to ext4. ext3 filesystems are still getting mounted.

---
 arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/mmc | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/mmc +0 -0
index 1a642f9..447e471 100644
@@ -5,4 +5,4 @@ global.bootm.oftree=/boot/oftree
 
Quoted 7 lines

arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/mmc global.bootm.oftree=/boot/oftree · line 8

Quoted 4 lines
arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/mmc +1 -1
 bootargs-ip
 
-global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2 rootfstype=ext3 rw rootwait"
+global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait"

Is the rootfstype necessary anyway? It should be automatically detected, no?

Yes, detection works. I'll remove it.

Teresa

Quoted 3 lines

Sascha

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

#5 lore raw
In reply to Teresa Gámez
Quoted 8 lines · Teresa Gámez

The roofs is mounted from nand when booting from spi. The VID header offset was set fix to 2048. This is not needed any more. Removed it like it was done for nand.

---
 arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/spi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Applied this one and 2/3.

Sascha

Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox