spi: atmel: Fix interrupt setup for PDC transfers
Subsystems (3)
PATCH 1/1 spi: atmel: Fix interrupt setup for PDC transfers
From: Torsten Fleischer <[email protected]>
Additionally to the current DMA transfer the PDC allows to set up a next DMA transfer. This is useful for larger SPI transfers.
The driver currently waits for ENDRX as end of the transfer. But ENDRX is set when the current DMA transfer is done (RCR = 0), i.e. it doesn't include the next DMA transfer.
Thus a subsequent SPI transfer could be started although there is currently a transfer in progress. This can cause invalid accesses to the SPI slave devices and to SPI transfer errors.
This issue has been observed on a hardware with a M25P128 SPI NOR flash.
So instead of ENDRX we should wait for RXBUFF. This flag is set if there is no more DMA transfer in progress (RCR = RNCR = 0).
--- drivers/spi/spi-atmel.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/spi/spi-atmel.c +6 -6
@@ -764,17 +764,17 @@ static void atmel_spi_pdc_next_xfer(struct spi_master *master, (unsigned long long)xfer->rx_dma); } -/* REVISIT: We're waiting for ENDRX before we start the next +/* REVISIT: We're waiting for RXBUFF before we start the next * transfer because we need to handle some difficult timing -* issues otherwise. If we wait for ENDTX in one transfer and -* then starts waiting for ENDRX in the next, it's difficult -* to tell the difference between the ENDRX interrupt we're -* actually waiting for and the ENDRX interrupt of the +* issues otherwise. If we wait for TXBUFE in one transfer and +* then starts waiting for RXBUFF in the next, it's difficult +* to tell the difference between the RXBUFF interrupt we're +* actually waiting for and the RXBUFF interrupt of the * previous transfer. * * It should be doable, though. Just not now... */ -spi_writel (as,IER ,SPI_BIT (ENDRX ) |SPI_BIT (OVRES )); +spi_writel (as,IER ,SPI_BIT (RXBUFF ) |SPI_BIT (OVRES ));spi_writel (as,PTCR ,SPI_BIT (TXTEN ) |SPI_BIT (RXTEN )); }
Signature · 6 lines
2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Mark Brown
maintainerPATCH 1/1 spi: atmel: Fix interrupt setup for PDC transfers
Quoted 4 lines · Torsten Fleischer
From: Torsten Fleischer <[email protected]>
Additionally to the current DMA transfer the PDC allows to set up a next DMA transfer. This is useful for larger SPI transfers.
Applied, thanks.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150226/6efb6cc6/attachment.sig>