hwmon: (it87) Add support for IT8786E
Subsystems (3)
Guenter Roeck
maintainerPATCH v2 4/5 hwmon: (it87) Add support for IT8786E
From: Thomas Lorblanches <[email protected]>
IT8786E is mostly compatible with IT8771 / IT8772. Parameters determined by testing various combinations.
Reviewed-by Jean Delvare <[email protected]>
Signed-off-by Thomas Lorblanches <[email protected]>
[Guenter Roeck: merged from github, addressed review comments]
Signed-off-by Guenter Roeck <[email protected]>
---
v2: Coding style updates
(change order of comparisons, fix unnecessary line continuation)
Documentation/hwmon/it87 | 6 +++++- drivers/hwmon/Kconfig | 4 ++-- drivers/hwmon/it87.c | 22 ++++++++++++++++------ 3 files changed, 23 insertions(+), 9 deletions(-)
Documentation/hwmon/it87 +5 -1
@@ -54,6 +54,10 @@ Supported chips: Prefix: 'it8783' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Not publicly available + * IT8786E + Prefix: 'it8786' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available * SiS950 [clone of IT8705F] Prefix: 'it87' Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -100,7 +104,7 @@ Description This driver implements support for the IT8603E, IT8623E, IT8705F, IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, IT8771E, -IT8772E, IT8781F, IT8782F, IT8783E/F, and SiS950 chips. +IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, and SiS950 chips. These chips are 'Super I/O chips', supporting floppy disks, infrared ports, joysticks and other miscellaneous stuff. For hardware monitoring, they
drivers/hwmon/Kconfig +2 -2
@@ -599,8 +599,8 @@ config SENSORS_IT87 help If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, - IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F and IT8603E - sensor chips, and the SiS950 clone. + IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, + and IT8603E sensor chips, and the SiS950 clone. This driver can also be built as a module. If so, the module will be called it87.
drivers/hwmon/it87.c +16 -6
@@ -26,6 +26,7 @@* IT8781F Super I/O chip w/LPC interface * IT8782F Super I/O chip w/LPC interface * IT8783E/F Super I/O chip w/LPC interface +* IT8786E Super I/O chip w/LPC interface * Sis950 A clone of the IT8705F * * Copyright (C) 2001 Chris Gauthron
@@ -67,7 +68,7 @@#define DRVNAME "it87"enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8771, - it8772, it8781, it8782, it8783, it8603 }; + it8772, it8781, it8782, it8783, it8786, it8603 };static unsigned short force_id;module_param (force_id, ushort,0 );
@@ -150,6 +151,7 @@ static inline void superio_exit(void)#define IT8781F_DEVID 0x8781#define IT8782F_DEVID 0x8782#define IT8783E_DEVID 0x8783 +#define IT8786E_DEVID 0x8786#define IT8603E_DEVID 0x8603#define IT8623E_DEVID 0x8623#define IT87_ACT_REG 0x30
@@ -335,6 +337,12 @@ static const struct it87_devices it87_devices[] = { | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG, .old_peci_mask = 0x4, }, + [it8786] = { + .name = "it8786", + .features =FEAT_NEWER_AUTOPWM |FEAT_12MV_ADC |FEAT_16BIT_FANS + | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI, + .peci_mask = 0x07, + }, [it8603] = { .name ="it8603" , .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
@@ -1789,6 +1797,9 @@ static int __init it87_find(unsigned short *address,case IT8783E_DEVID : sio_data->type = it8783;break ; +case IT8786E_DEVID : + sio_data->type = it8786; +break ;case IT8603E_DEVID :case IT8623E_DEVID : sio_data->type = it8603;
@@ -1816,8 +1827,8 @@ static int __init it87_find(unsigned short *address, sio_data->revision =superio_inb (DEVREV ) &0x0f ;pr_info ("Found IT%04x%c chip at 0x%x, revision %d\n" , chip_type, chip_type =0x8771 || chip_type =0x8772 || - chip_type =0x8603 ?'E' :'F' , *address, - sio_data->revision); + chip_type =0x8786 || chip_type =0x8603 ?'E' :'F' , + *address, sio_data->revision);/* in8 (Vbat) is always internal */ sio_data->internal = (1 <<2 );
@@ -1987,9 +1998,8 @@ static int __init it87_find(unsigned short *address,if (reg & (1 <<0 )) sio_data->internal |= (1 <<0 );if ((reg & (1 <<1 )) || sio_data->type = it8721 || - sio_data->type = it8728 || - sio_data->type = it8771 || - sio_data->type = it8772) + sio_data->type = it8728 || sio_data->type = it8771 || + sio_data->type = it8772 || sio_data->type = it8786) sio_data->internal |= (1 <<1 );/*
Signature · 7 lines
2.1.0 _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors