sun6i: Add support for the Mele I7 board
PATCH 1/1 sun6i: Add support for the Mele I7 board
From: Marcus Cooper <[email protected]>
The Mele I7 is a Allwinner based Android TV box.
It features a A31 SOC, 1G RAM, 8GB NAND, HDMI out, A/V out, SPDIF, IrDA, 3 USB A, 1 USB micro OTG and Wireless LAN.
--- board/sunxi/MAINTAINERS | 5 +++++ configs/Mele_I7_defconfig | 20 ++++++++++++++++++++ 2 files changed, 25 insertions(+) create mode 100644 configs/Mele_I7_defconfig
board/sunxi/MAINTAINERS +5 -0
@@ -100,6 +100,11 @@ M: Aleksei Mamlin <[email protected]> S: Maintained F: configs/Marsboard_A10_defconfig +MELE I7 BOARD +M: Marcus Cooper <[email protected]> +S: Maintained +F: configs/Mele_I7_defconfig + MELE M5 BOARD M: Ian Campbell <[email protected]> S: Maintained
configs/Mele_I7_defconfig new file +20 -0
@@ -0,0 +1,20 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" +CONFIG_FDTFILE="sun6i-a31-i7.dtb" ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN6I=y ++S:CONFIG_DRAM_CLK=312 ++S:CONFIG_DRAM_ZQ=120 +# The Mele I7 uses 3.3V for general IO ++S:CONFIG_AXP221_DCDC1_VOLT=3300 +# Ethernet phy power ++S:CONFIG_AXP221_DLDO1_VOLT=3300 +# USB hub power ++S:CONFIG_AXP221_DLDO4_VOLT=3300 +# Wifi power ++S:CONFIG_AXP221_ALDO1_VOLT=3300 +# Vbus gpio for usb1 ++S:CONFIG_USB1_VBUS_PIN="PC27" +# No Vbus gpio for usb2 ++S:CONFIG_USB2_VBUS_PIN=""
Signature · 1 line
2.3.1
PATCH 1/1 sunxi: Add support for the Forfun Q88DB tablet
The Forfun Q88DB is an A13 tablet in the common Q8 format.
Features are 512MB RAM, 4GB NAND, 7" Display, RTL8188 Wifi, 2 cameras.
For more details see: http://linux-sunxi.org/Forfun_Q88DB
---
:100644 100644 9a287d3... cfc2764... M board/sunxi/MAINTAINERS :000000 100644 0000000... e1b11a2... A configs/forfun_q88db_defconfig
board/sunxi/MAINTAINERS | 5 +++++ configs/forfun_q88db_defconfig | 17 +++++++++++++++++ 2 files changed, 22 insertions(+)
board/sunxi/MAINTAINERS +5 -0
@@ -64,6 +64,11 @@ F: include/configs/sun7i.h F: configs/Cubieboard2_defconfig F: configs/Cubietruck_defconfig +FORFUN-Q88DB TABLET +M: Jens Lucius <[email protected]> +S: Maintained +F: configs/forfun_q88db_defconfig + GEMEI-G9 TABLET M: Priit Laes <[email protected]> S: Maintained
configs/forfun_q88db_defconfig new file +17 -0
@@ -0,0 +1,17 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +CONFIG_FDTFILE="sun5i-a13-forfun-q88db.dtb" +CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB0_VBUS_PIN="PG12" +CONFIG_USB0_VBUS_DET="PG1" +CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_POWER="AXP0-0" +CONFIG_VIDEO_LCD_BL_EN="AXP0-1" +CONFIG_VIDEO_LCD_BL_PWM="PB2" ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN5I=y ++S:CONFIG_DRAM_CLK=384 ++S:CONFIG_DRAM_ZQ=123 ++S:CONFIG_DRAM_EMR1=4 +
--
1.9.1
PATCH 1/1 sunxi: Add support for the Forfun Q88DB tablet
Quoted 7 lines · Jens Lucius
The Forfun Q88DB is an A13 tablet in the common Q8 format.
Features are 512MB RAM, 4GB NAND, 7" Display, RTL8188 Wifi, 2 cameras.
For more details see: http://linux-sunxi.org/Forfun_Q88DB
Signed-off-by Jens Lucius <[email protected]>
Applied to u-boot-sunxi#next, thanks.