bbu: include necessary headers
Subsystems (3)
PATCH 1/5 bbu: include necessary headers
Fixes compile errors due to undefined symbols.
--- include/bbu.h | 2 ++ 1 file changed, 2 insertions(+)
include/bbu.h +2 -0
@@ -2,6 +2,8 @@#define __INCLUDE_BBU_H#include <asm-generic/errno.h> +#include <linux/list.h> +#include <linux/types.h> struct bbu_data {#define BBU_FLAG_FORCE (1 << 0)
Signature · 7 lines
2.1.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH 2/5 bbu: make bbu confirm a bit more verbose
It is a lot more user friendly if we give a bit more feedback.
--- common/bbu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
common/bbu.c +3 -1
@@ -65,8 +65,10 @@ int bbu_confirm(struct bbu_data *data) key =read_key (); -if (key =='y' ) +if (key =='y' ) { +printf ("updating barebox...\n" );return 0 ; + }return -EINTR ; }
Signature · 7 lines
2.1.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH 3/5 ARM: tegra: add eMMC barebox update handler
In reply to Lucas Stach--- arch/arm/mach-tegra/Makefile | 1 + arch/arm/mach-tegra/include/mach/tegra-bbu.h | 28 +++++++++++ arch/arm/mach-tegra/tegra-bbu.c | 74 ++++++++++++++++++++++++++++ 3 files changed, 103 insertions(+) create mode 100644 arch/arm/mach-tegra/include/mach/tegra-bbu.h create mode 100644 arch/arm/mach-tegra/tegra-bbu.c
arch/arm/mach-tegra/Makefile +1 -0
@@ -13,3 +13,4 @@ lwl-y += tegra_maincomplex_init.o obj-y += tegra20.o obj-y += tegra20-pmc.o obj-y += tegra20-timer.o +obj-$(CONFIG_BAREBOX_UPDATE) += tegra-bbu.o
arch/arm/mach-tegra/include/mach/tegra-bbu.h new file +28 -0
@@ -0,0 +1,28 @@ +/* +* Copyright (C) 2015 Lucas Stach <[email protected]> +* +* This program is free software; you can redistribute it and/or modify it +* under the terms and conditions of the GNU General Public License, +* version 2, as published by the Free Software Foundation. +* +* This program is distributed in the hope it will be useful, but WITHOUT +* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +* more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <bbu.h> + +#ifdef CONFIG_BAREBOX_UPDATE +int tegra_bbu_register_emmc_handler (const char *name,char *devicefile, +unsigned long flags); +#else +static int tegra_bbu_register_emmc_handler (const char *name,char *devicefile, +unsigned long flags) +{ +return 0 ; +}; +#endif
arch/arm/mach-tegra/tegra-bbu.c new file +74 -0
74 lines not on this page · raw message
Signature · 7 lines
2.1.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH 4/5 ARM: tegra: add barebox update handler to Beaver board
In reply to Lucas Stach--- arch/arm/boards/nvidia-beaver/board.c | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/boards/nvidia-beaver/board.c +4 -0
@@ -19,6 +19,7 @@#include <gpio.h> #include <i2c/i2c.h> #include <init.h> +#include <mach/tegra-bbu.h> static int nvidia_beaver_fs_init (void ) {
@@ -53,6 +54,9 @@ static int nvidia_beaver_device_init(void)barebox_set_hostname ("beaver" ); +tegra_bbu_register_emmc_handler ("eMMC" ,"/dev/disk0.boot0" , +BBU_HANDLER_FLAG_DEFAULT ); +return 0 ; }device_initcall (nvidia_beaver_device_init);
Signature · 7 lines
2.1.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Re: [PATCH 4/5] ARM: tegra: add barebox update handler to Beaver board
Quoted 18 lines · Lucas Stach
Signed-off-by Lucas Stach <[email protected]>--- arch/arm/boards/nvidia-beaver/board.c | 4 ++++ 1 file changed, 4 insertions(+)arch/arm/boards/nvidia-beaver/board.c +1
-0@@ -19,6 +19,7 @@#include <gpio.h> #include <i2c/i2c.h> #include <init.h> +#include <mach/tegra-bbu.h> static int nvidia_beaver_fs_init (void ) {
arch/arm/boards/nvidia-beaver/board.c static int nvidia_beaver_device_init(void) · line 58
Quoted 5 lines
arch/arm/boards/nvidia-beaver/board.c +2
-0@@ -53,6 +54,9 @@ static int nvidia_beaver_device_init(void)barebox_set_hostname ("beaver" ); +tegra_bbu_register_emmc_handler ("eMMC" ,"/dev/disk0.boot0" , +BBU_HANDLER_FLAG_DEFAULT );
'disk0' is not a persistent name and will change when your SD slots are probed in a different order. You should add aliases to the device nodes and use of_alias_get() to obtain them, see for example imx-esdhc.c
Sascha
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Re: [PATCH 4/5] ARM: tegra: add barebox update handler to Beaver board
Am Sonntag, den 01.03.2015, 08:23 +0100 schrieb Sascha Hauer:
Quoted 20 lines · Lucas Stach
Quoted 19 lines
Signed-off-by Lucas Stach <[email protected]>--- arch/arm/boards/nvidia-beaver/board.c | 4 ++++ 1 file changed, 4 insertions(+)arch/arm/boards/nvidia-beaver/board.c +1
-0@@ -19,6 +19,7 @@#include <gpio.h> #include <i2c/i2c.h> #include <init.h> +#include <mach/tegra-bbu.h> static int nvidia_beaver_fs_init (void ) {@@ -53,6 +54,9 @@ static int nvidia_beaver_device_init(void)
Quoted 9 lines
arch/arm/boards/nvidia-beaver/board.c static int nvidia_beaver_device_init(void) · line 58
Quoted 4 lines
arch/arm/boards/nvidia-beaver/board.c +2
-0barebox_set_hostname ("beaver" ); +tegra_bbu_register_emmc_handler ("eMMC" ,"/dev/disk0.boot0" , +BBU_HANDLER_FLAG_DEFAULT );'disk0' is not a persistent name and will change when your SD slots are probed in a different order. You should add aliases to the device nodes and use
of_alias_get()to obtain them, see for exampleimx-esdhc.c
It's not a problem for these patches, as both boards have their environment on disk0.boot1, so the eMMC will always be the first SDMMC device to be detected and consequently always get number 0 assigned.
But in general I agree with you and will add the alias handling in a follow on series.
Regards,
Lucas
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
PATCH 5/5 ARM: tegra: add barebox update handler to Jetson board
In reply to Lucas Stach--- arch/arm/boards/nvidia-jetson-tk1/board.c | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/boards/nvidia-jetson-tk1/board.c +4 -0
@@ -19,6 +19,7 @@#include <gpio.h> #include <i2c/i2c.h> #include <init.h> +#include <mach/tegra-bbu.h> #define AS3722_SD_VOLTAGE (n) (0x00 + (n))#define AS3722_GPIO_CONTROL (n) (0x08 + (n))
@@ -56,6 +57,9 @@ static int nvidia_jetson_tk1_device_init(void)barebox_set_hostname ("jetson-tk1" ); +tegra_bbu_register_emmc_handler ("eMMC" ,"/dev/disk0.boot0" , +BBU_HANDLER_FLAG_DEFAULT ); +return 0 ; }device_initcall (nvidia_jetson_tk1_device_init);
Signature · 7 lines
2.1.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox