Staging: fbtft: fix coding style errors
Subsystems (2)
PATCH 1/1 Staging: fbtft: fix coding style errors
From: Matteo Semenzato <[email protected]>
This patch fixes the following error:
space required after that ';'
--- drivers/staging/fbtft/fbtft_device.c | 68 ++++++++++++++++++------------------ 1 file changed, 34 insertions(+), 34 deletions(-)
drivers/staging/fbtft/fbtft_device.c +34 -34
@@ -61,7 +61,7 @@ MODULE_PARM_DESC(mode, "SPI mode (override device default)");static char *gpios;module_param (gpios, charp,0 );MODULE_PARM_DESC (gpios, -"List of gpios. Comma separated with the form: reset:23,dc:24 " \ +"List of gpios. Comma separated with the form: reset:23, dc:24 " \"(when overriding the default, all gpios must be specified)" );static unsigned fps;
@@ -109,7 +109,7 @@ module_param_array(init, int, &init_num, 0);MODULE_PARM_DESC (init,"Init sequence, used with the custom argument" );static unsigned long debug; -module_param (debug, ulong ,0 ); +module_param (debug, ulong,0 );MODULE_PARM_DESC (debug,"level: 0-7 (the remaining 29 bits is for advanced usage)" );
@@ -136,43 +136,43 @@ static void adafruit18_green_tab_set_addr_win(struct fbtft_par *par,"03 1d 07 06 2E 2C 29 2D 2E 2E 37 3F 00 00 02 10" static int hy28b_init_sequence[] = { --1 ,0x00e7 ,0x0010 ,-1 ,0x0000 ,0x0001 ,-1 ,0x0001 ,0x0100 ,-1 ,0x0002 ,0x0700 , --1 ,0x0003 ,0x1030 ,-1 ,0x0004 ,0x0000 ,-1 ,0x0008 ,0x0207 ,-1 ,0x0009 ,0x0000 , --1 ,0x000a ,0x0000 ,-1 ,0x000c ,0x0001 ,-1 ,0x000d ,0x0000 ,-1 ,0x000f ,0x0000 , --1 ,0x0010 ,0x0000 ,-1 ,0x0011 ,0x0007 ,-1 ,0x0012 ,0x0000 ,-1 ,0x0013 ,0x0000 , --2 ,50 ,-1 ,0x0010 ,0x1590 ,-1 ,0x0011 ,0x0227 ,-2 ,50 ,-1 ,0x0012 ,0x009c ,-2 ,50 , --1 ,0x0013 ,0x1900 ,-1 ,0x0029 ,0x0023 ,-1 ,0x002b ,0x000e ,-2 ,50 , --1 ,0x0020 ,0x0000 ,-1 ,0x0021 ,0x0000 ,-2 ,50 ,-1 ,0x0050 ,0x0000 , --1 ,0x0051 ,0x00ef ,-1 ,0x0052 ,0x0000 ,-1 ,0x0053 ,0x013f ,-1 ,0x0060 ,0xa700 , --1 ,0x0061 ,0x0001 ,-1 ,0x006a ,0x0000 ,-1 ,0x0080 ,0x0000 ,-1 ,0x0081 ,0x0000 , --1 ,0x0082 ,0x0000 ,-1 ,0x0083 ,0x0000 ,-1 ,0x0084 ,0x0000 ,-1 ,0x0085 ,0x0000 , --1 ,0x0090 ,0x0010 ,-1 ,0x0092 ,0x0000 ,-1 ,0x0093 ,0x0003 ,-1 ,0x0095 ,0x0110 , --1 ,0x0097 ,0x0000 ,-1 ,0x0098 ,0x0000 ,-1 ,0x0007 ,0x0133 ,-1 ,0x0020 ,0x0000 , - -1,0x0021,0x0000,-2,100,-3 }; +-1 ,0x00e7 ,0x0010 ,-1 ,0x0000 ,0x0001 ,-1 ,0x0001 ,0x0100 ,-1 ,0x0002 ,0x0700 , +-1 ,0x0003 ,0x1030 ,-1 ,0x0004 ,0x0000 ,-1 ,0x0008 ,0x0207 ,-1 ,0x0009 ,0x0000 , +-1 ,0x000a ,0x0000 ,-1 ,0x000c ,0x0001 ,-1 ,0x000d ,0x0000 ,-1 ,0x000f ,0x0000 , +-1 ,0x0010 ,0x0000 ,-1 ,0x0011 ,0x0007 ,-1 ,0x0012 ,0x0000 ,-1 ,0x0013 ,0x0000 , +-2 ,50 ,-1 ,0x0010 ,0x1590 ,-1 ,0x0011 ,0x0227 ,-2 ,50 ,-1 ,0x0012 ,0x009c ,-2 ,50 , +-1 ,0x0013 ,0x1900 ,-1 ,0x0029 ,0x0023 ,-1 ,0x002b ,0x000e ,-2 ,50 , +-1 ,0x0020 ,0x0000 ,-1 ,0x0021 ,0x0000 ,-2 ,50 ,-1 ,0x0050 ,0x0000 , +-1 ,0x0051 ,0x00ef ,-1 ,0x0052 ,0x0000 ,-1 ,0x0053 ,0x013f ,-1 ,0x0060 ,0xa700 , +-1 ,0x0061 ,0x0001 ,-1 ,0x006a ,0x0000 ,-1 ,0x0080 ,0x0000 ,-1 ,0x0081 ,0x0000 , +-1 ,0x0082 ,0x0000 ,-1 ,0x0083 ,0x0000 ,-1 ,0x0084 ,0x0000 ,-1 ,0x0085 ,0x0000 , +-1 ,0x0090 ,0x0010 ,-1 ,0x0092 ,0x0000 ,-1 ,0x0093 ,0x0003 ,-1 ,0x0095 ,0x0110 , +-1 ,0x0097 ,0x0000 ,-1 ,0x0098 ,0x0000 ,-1 ,0x0007 ,0x0133 ,-1 ,0x0020 ,0x0000 , + -1, 0x0021, 0x0000, -2, 100, -3 };#define HY28B_GAMMA \ "04 1F 4 7 7 0 7 7 6 0\n" \ "0F 00 1 7 4 0 0 0 6 7"static int pitft_init_sequence[] = { --1 ,0x01 ,-2 ,5 ,-1 ,0x28 ,-1 ,0xEF ,0x03 ,0x80 ,0x02 ,-1 ,0xCF ,0x00 ,0xC1 ,0x30 , --1 ,0xED ,0x64 ,0x03 ,0x12 ,0x81 ,-1 ,0xE8 ,0x85 ,0x00 ,0x78 , --1 ,0xCB ,0x39 ,0x2C ,0x00 ,0x34 ,0x02 ,-1 ,0xF7 ,0x20 ,-1 ,0xEA ,0x00 ,0x00 , --1 ,0xC0 ,0x23 ,-1 ,0xC1 ,0x10 ,-1 ,0xC5 ,0x3e ,0x28 ,-1 ,0xC7 ,0x86 ,-1 ,0x3A ,0x55 , --1 ,0xB1 ,0x00 ,0x18 ,-1 ,0xB6 ,0x08 ,0x82 ,0x27 ,-1 ,0xF2 ,0x00 ,-1 ,0x26 ,0x01 , --1 ,0xE0 ,0x0F ,0x31 ,0x2B ,0x0C ,0x0E ,0x08 ,0x4E ,0xF1 ,0x37 ,0x07 ,0x10 ,0x03 , -0x0E ,0x09 ,0x00 ,-1 ,0xE1 ,0x00 ,0x0E ,0x14 ,0x03 ,0x11 ,0x07 ,0x31 ,0xC1 ,0x48 , -0x08 ,0x0F ,0x0C ,0x31 ,0x36 ,0x0F ,-1 ,0x11 ,-2 ,100 ,-1 ,0x29 ,-2 ,20 ,-3 }; +-1 ,0x01 ,-2 ,5 ,-1 ,0x28 ,-1 ,0xEF ,0x03 ,0x80 ,0x02 ,-1 ,0xCF ,0x00 ,0xC1 ,0x30 , +-1 ,0xED ,0x64 ,0x03 ,0x12 ,0x81 ,-1 ,0xE8 ,0x85 ,0x00 ,0x78 , +-1 ,0xCB ,0x39 ,0x2C ,0x00 ,0x34 ,0x02 ,-1 ,0xF7 ,0x20 ,-1 ,0xEA ,0x00 ,0x00 , +-1 ,0xC0 ,0x23 ,-1 ,0xC1 ,0x10 ,-1 ,0xC5 ,0x3e ,0x28 ,-1 ,0xC7 ,0x86 ,-1 ,0x3A ,0x55 , +-1 ,0xB1 ,0x00 ,0x18 ,-1 ,0xB6 ,0x08 ,0x82 ,0x27 ,-1 ,0xF2 ,0x00 ,-1 ,0x26 ,0x01 , +-1 ,0xE0 ,0x0F ,0x31 ,0x2B ,0x0C ,0x0E ,0x08 ,0x4E ,0xF1 ,0x37 ,0x07 ,0x10 ,0x03 , +0x0E ,0x09 ,0x00 ,-1 ,0xE1 ,0x00 ,0x0E ,0x14 ,0x03 ,0x11 ,0x07 ,0x31 ,0xC1 ,0x48 , +0x08 ,0x0F ,0x0C ,0x31 ,0x36 ,0x0F ,-1 ,0x11 ,-2 ,100 ,-1 ,0x29 ,-2 ,20 ,-3 };static int waveshare32b_init_sequence[] = { --1 ,0xCB ,0x39 ,0x2C ,0x00 ,0x34 ,0x02 ,-1 ,0xCF ,0x00 ,0xC1 ,0x30 , --1 ,0xE8 ,0x85 ,0x00 ,0x78 ,-1 ,0xEA ,0x00 ,0x00 ,-1 ,0xED ,0x64 ,0x03 ,0x12 ,0x81 , --1 ,0xF7 ,0x20 ,-1 ,0xC0 ,0x23 ,-1 ,0xC1 ,0x10 ,-1 ,0xC5 ,0x3e ,0x28 ,-1 ,0xC7 ,0x86 , --1 ,0x36 ,0x28 ,-1 ,0x3A ,0x55 ,-1 ,0xB1 ,0x00 ,0x18 ,-1 ,0xB6 ,0x08 ,0x82 ,0x27 , --1 ,0xF2 ,0x00 ,-1 ,0x26 ,0x01 , --1 ,0xE0 ,0x0F ,0x31 ,0x2B ,0x0C ,0x0E ,0x08 ,0x4E ,0xF1 ,0x37 ,0x07 ,0x10 ,0x03 ,0x0E ,0x09 ,0x00 , --1 ,0xE1 ,0x00 ,0x0E ,0x14 ,0x03 ,0x11 ,0x07 ,0x31 ,0xC1 ,0x48 ,0x08 ,0x0F ,0x0C ,0x31 ,0x36 ,0x0F , --1 ,0x11 ,-2 ,120 ,-1 ,0x29 ,-1 ,0x2c ,-3 }; +-1 ,0xCB ,0x39 ,0x2C ,0x00 ,0x34 ,0x02 ,-1 ,0xCF ,0x00 ,0xC1 ,0x30 , +-1 ,0xE8 ,0x85 ,0x00 ,0x78 ,-1 ,0xEA ,0x00 ,0x00 ,-1 ,0xED ,0x64 ,0x03 ,0x12 ,0x81 , +-1 ,0xF7 ,0x20 ,-1 ,0xC0 ,0x23 ,-1 ,0xC1 ,0x10 ,-1 ,0xC5 ,0x3e ,0x28 ,-1 ,0xC7 ,0x86 , +-1 ,0x36 ,0x28 ,-1 ,0x3A ,0x55 ,-1 ,0xB1 ,0x00 ,0x18 ,-1 ,0xB6 ,0x08 ,0x82 ,0x27 , +-1 ,0xF2 ,0x00 ,-1 ,0x26 ,0x01 , +-1 ,0xE0 ,0x0F ,0x31 ,0x2B ,0x0C ,0x0E ,0x08 ,0x4E ,0xF1 ,0x37 ,0x07 ,0x10 ,0x03 ,0x0E ,0x09 ,0x00 , +-1 ,0xE1 ,0x00 ,0x0E ,0x14 ,0x03 ,0x11 ,0x07 ,0x31 ,0xC1 ,0x48 ,0x08 ,0x0F ,0x0C ,0x31 ,0x36 ,0x0F , +-1 ,0x11 ,-2 ,120 ,-1 ,0x29 ,-1 ,0x2c ,-3 };/* Supported displays in alphabetical order */ static struct fbtft_device_display displays[] = {
@@ -486,7 +486,7 @@ static struct fbtft_device_display displays[] = { }, .startbyte = 0b01110000, .bgr = true, - .fps= 50, + .fps = 50, .gpios = (const struct fbtft_gpio []) { {"reset" ,25 }, {"led" ,18 },
@@ -532,8 +532,8 @@ static struct fbtft_device_display displays[] = { .gpios = (const struct fbtft_gpio []) {/* Wiring for LCD adapter kit */ {"reset" ,7 }, - {"dc" ,0 },/* rev 2: 2 */ - {"wr" ,1 },/* rev 2: 3 */ + {"dc" ,0 },/* rev 2: 2 */ + {"wr" ,1 },/* rev 2: 3 */ {"cs" ,8 }, {"db00" ,17 }, {"db01" ,18 },
Signature · 1 line
2.3.1
PATCH v2 1/1 Staging: fbtft: fix coding style errors
From: Matteo Semenzato <[email protected]>
This patch fixes the following error:
space required after that ';'
--- drivers/staging/fbtft/fbtft_device.c | 145 +++++++++++++++++++++++++++-------- 1 file changed, 111 insertions(+), 34 deletions(-)
drivers/staging/fbtft/fbtft_device.c +111 -34
@@ -61,7 +61,7 @@ MODULE_PARM_DESC(mode, "SPI mode (override device default)");static char *gpios;module_param (gpios, charp,0 );MODULE_PARM_DESC (gpios, -"List of gpios. Comma separated with the form: reset:23,dc:24 " \ +"List of gpios. Comma separated with the form: reset:23, dc:24 " \"(when overriding the default, all gpios must be specified)" );static unsigned fps;
@@ -109,7 +109,7 @@ module_param_array(init, int, &init_num, 0);MODULE_PARM_DESC (init,"Init sequence, used with the custom argument" );static unsigned long debug; -module_param (debug, ulong ,0 ); +module_param (debug, ulong,0 );MODULE_PARM_DESC (debug,"level: 0-7 (the remaining 29 bits is for advanced usage)" );
@@ -136,43 +136,120 @@ static void adafruit18_green_tab_set_addr_win(struct fbtft_par *par,"03 1d 07 06 2E 2C 29 2D 2E 2E 37 3F 00 00 02 10" static int hy28b_init_sequence[] = { --1 ,0x00e7 ,0x0010 ,-1 ,0x0000 ,0x0001 ,-1 ,0x0001 ,0x0100 ,-1 ,0x0002 ,0x0700 , --1 ,0x0003 ,0x1030 ,-1 ,0x0004 ,0x0000 ,-1 ,0x0008 ,0x0207 ,-1 ,0x0009 ,0x0000 , --1 ,0x000a ,0x0000 ,-1 ,0x000c ,0x0001 ,-1 ,0x000d ,0x0000 ,-1 ,0x000f ,0x0000 , --1 ,0x0010 ,0x0000 ,-1 ,0x0011 ,0x0007 ,-1 ,0x0012 ,0x0000 ,-1 ,0x0013 ,0x0000 , --2 ,50 ,-1 ,0x0010 ,0x1590 ,-1 ,0x0011 ,0x0227 ,-2 ,50 ,-1 ,0x0012 ,0x009c ,-2 ,50 , --1 ,0x0013 ,0x1900 ,-1 ,0x0029 ,0x0023 ,-1 ,0x002b ,0x000e ,-2 ,50 , --1 ,0x0020 ,0x0000 ,-1 ,0x0021 ,0x0000 ,-2 ,50 ,-1 ,0x0050 ,0x0000 , --1 ,0x0051 ,0x00ef ,-1 ,0x0052 ,0x0000 ,-1 ,0x0053 ,0x013f ,-1 ,0x0060 ,0xa700 , --1 ,0x0061 ,0x0001 ,-1 ,0x006a ,0x0000 ,-1 ,0x0080 ,0x0000 ,-1 ,0x0081 ,0x0000 , --1 ,0x0082 ,0x0000 ,-1 ,0x0083 ,0x0000 ,-1 ,0x0084 ,0x0000 ,-1 ,0x0085 ,0x0000 , --1 ,0x0090 ,0x0010 ,-1 ,0x0092 ,0x0000 ,-1 ,0x0093 ,0x0003 ,-1 ,0x0095 ,0x0110 , --1 ,0x0097 ,0x0000 ,-1 ,0x0098 ,0x0000 ,-1 ,0x0007 ,0x0133 ,-1 ,0x0020 ,0x0000 , - -1,0x0021,0x0000,-2,100,-3 }; +-1 ,0x00e7 ,0x0010 , +-1 ,0x0000 ,0x0001 , +-1 ,0x0001 ,0x0100 , +-1 ,0x0002 ,0x0700 , +-1 ,0x0003 ,0x1030 , +-1 ,0x0004 ,0x0000 , +-1 ,0x0008 ,0x0207 , +-1 ,0x0009 ,0x0000 , +-1 ,0x000a ,0x0000 , +-1 ,0x000c ,0x0001 , +-1 ,0x000d ,0x0000 , +-1 ,0x000f ,0x0000 , +-1 ,0x0010 ,0x0000 , +-1 ,0x0011 ,0x0007 , +-1 ,0x0012 ,0x0000 , +-1 ,0x0013 ,0x0000 , +-2 ,50 , +-1 ,0x0010 ,0x1590 , +-1 ,0x0011 ,0x0227 , +-2 ,50 , +-1 ,0x0012 ,0x009c , +-2 ,50 , +-1 ,0x0013 ,0x1900 , +-1 ,0x0029 ,0x0023 , +-1 ,0x002b ,0x000e , +-2 ,50 , +-1 ,0x0020 ,0x0000 , +-1 ,0x0021 ,0x0000 , +-2 ,50 , +-1 ,0x0050 ,0x0000 , +-1 ,0x0051 ,0x00ef , +-1 ,0x0052 ,0x0000 , +-1 ,0x0053 ,0x013f , +-1 ,0x0060 ,0xa700 , +-1 ,0x0061 ,0x0001 , +-1 ,0x006a ,0x0000 , +-1 ,0x0080 ,0x0000 , +-1 ,0x0081 ,0x0000 , +-1 ,0x0082 ,0x0000 , +-1 ,0x0083 ,0x0000 , +-1 ,0x0084 ,0x0000 , +-1 ,0x0085 ,0x0000 , +-1 ,0x0090 ,0x0010 , +-1 ,0x0092 ,0x0000 , +-1 ,0x0093 ,0x0003 , +-1 ,0x0095 ,0x0110 , +-1 ,0x0097 ,0x0000 , +-1 ,0x0098 ,0x0000 , +-1 ,0x0007 ,0x0133 , +-1 ,0x0020 ,0x0000 , +-1 ,0x0021 ,0x0000 , +-2 ,100 , +-3 +};#define HY28B_GAMMA \ "04 1F 4 7 7 0 7 7 6 0\n" \ "0F 00 1 7 4 0 0 0 6 7"static int pitft_init_sequence[] = { --1 ,0x01 ,-2 ,5 ,-1 ,0x28 ,-1 ,0xEF ,0x03 ,0x80 ,0x02 ,-1 ,0xCF ,0x00 ,0xC1 ,0x30 , --1 ,0xED ,0x64 ,0x03 ,0x12 ,0x81 ,-1 ,0xE8 ,0x85 ,0x00 ,0x78 , --1 ,0xCB ,0x39 ,0x2C ,0x00 ,0x34 ,0x02 ,-1 ,0xF7 ,0x20 ,-1 ,0xEA ,0x00 ,0x00 , --1 ,0xC0 ,0x23 ,-1 ,0xC1 ,0x10 ,-1 ,0xC5 ,0x3e ,0x28 ,-1 ,0xC7 ,0x86 ,-1 ,0x3A ,0x55 , --1 ,0xB1 ,0x00 ,0x18 ,-1 ,0xB6 ,0x08 ,0x82 ,0x27 ,-1 ,0xF2 ,0x00 ,-1 ,0x26 ,0x01 , --1 ,0xE0 ,0x0F ,0x31 ,0x2B ,0x0C ,0x0E ,0x08 ,0x4E ,0xF1 ,0x37 ,0x07 ,0x10 ,0x03 , -0x0E ,0x09 ,0x00 ,-1 ,0xE1 ,0x00 ,0x0E ,0x14 ,0x03 ,0x11 ,0x07 ,0x31 ,0xC1 ,0x48 , -0x08 ,0x0F ,0x0C ,0x31 ,0x36 ,0x0F ,-1 ,0x11 ,-2 ,100 ,-1 ,0x29 ,-2 ,20 ,-3 }; +-1 ,0x01 , +-2 ,5 , +-1 ,0x28 , +-1 ,0xEF ,0x03 ,0x80 ,0x02 , +-1 ,0xCF ,0x00 ,0xC1 ,0x30 , +-1 ,0xED ,0x64 ,0x03 ,0x12 ,0x81 , +-1 ,0xE8 ,0x85 ,0x00 ,0x78 , +-1 ,0xCB ,0x39 ,0x2C ,0x00 ,0x34 ,0x02 , +-1 ,0xF7 ,0x20 , +-1 ,0xEA ,0x00 ,0x00 , +-1 ,0xC0 ,0x23 , +-1 ,0xC1 ,0x10 , +-1 ,0xC5 ,0x3e ,0x28 , +-1 ,0xC7 ,0x86 , +-1 ,0x3A ,0x55 , +-1 ,0xB1 ,0x00 ,0x18 , +-1 ,0xB6 ,0x08 ,0x82 ,0x27 , +-1 ,0xF2 ,0x00 , +-1 ,0x26 ,0x01 , +-1 ,0xE0 ,0x0F ,0x31 ,0x2B ,0x0C ,0x0E ,0x08 ,0x4E ,0xF1 ,0x37 ,0x07 ,0x10 ,0x03 ,0x0E ,0x09 ,0x00 , +-1 ,0xE1 ,0x00 ,0x0E ,0x14 ,0x03 ,0x11 ,0x07 ,0x31 ,0xC1 ,0x48 ,0x0E ,0x09 ,0x00 , +-1 ,0xE1 ,0x00 ,0x0E ,0x14 ,0x03 ,0x11 ,0x07 ,0x31 ,0xC1 ,0x48 , +0x08 ,0x0F ,0x0C ,0x31 ,0x36 ,0x0F , +-1 ,0x11 , +-2 ,100 , +-1 ,0x29 , +-2 ,20 , +-3 +};static int waveshare32b_init_sequence[] = { --1 ,0xCB ,0x39 ,0x2C ,0x00 ,0x34 ,0x02 ,-1 ,0xCF ,0x00 ,0xC1 ,0x30 , --1 ,0xE8 ,0x85 ,0x00 ,0x78 ,-1 ,0xEA ,0x00 ,0x00 ,-1 ,0xED ,0x64 ,0x03 ,0x12 ,0x81 , --1 ,0xF7 ,0x20 ,-1 ,0xC0 ,0x23 ,-1 ,0xC1 ,0x10 ,-1 ,0xC5 ,0x3e ,0x28 ,-1 ,0xC7 ,0x86 , --1 ,0x36 ,0x28 ,-1 ,0x3A ,0x55 ,-1 ,0xB1 ,0x00 ,0x18 ,-1 ,0xB6 ,0x08 ,0x82 ,0x27 , --1 ,0xF2 ,0x00 ,-1 ,0x26 ,0x01 , --1 ,0xE0 ,0x0F ,0x31 ,0x2B ,0x0C ,0x0E ,0x08 ,0x4E ,0xF1 ,0x37 ,0x07 ,0x10 ,0x03 ,0x0E ,0x09 ,0x00 , --1 ,0xE1 ,0x00 ,0x0E ,0x14 ,0x03 ,0x11 ,0x07 ,0x31 ,0xC1 ,0x48 ,0x08 ,0x0F ,0x0C ,0x31 ,0x36 ,0x0F , --1 ,0x11 ,-2 ,120 ,-1 ,0x29 ,-1 ,0x2c ,-3 }; +-1 ,0xCB ,0x39 ,0x2C ,0x00 ,0x34 ,0x02 , +-1 ,0xCF ,0x00 ,0xC1 ,0x30 , +-1 ,0xE8 ,0x85 ,0x00 ,0x78 , +-1 ,0xEA ,0x00 ,0x00 , +-1 ,0xED ,0x64 ,0x03 ,0x12 ,0x81 , +-1 ,0xF7 ,0x20 ,-1 ,0xC0 ,0x23 , +-1 ,0xC1 ,0x10 , +-1 ,0xC5 ,0x3e ,0x28 , +-1 ,0xC7 ,0x86 , +-1 ,0x36 ,0x28 , +-1 ,0x3A ,0x55 , +-1 ,0xB1 ,0x00 ,0x18 , +-1 ,0xB6 ,0x08 ,0x82 ,0x27 , +-1 ,0xF2 ,0x00 , +-1 ,0x26 ,0x01 , +-1 ,0xE0 ,0x0F ,0x31 ,0x2B ,0x0C ,0x0E ,0x08 ,0x4E ,0xF1 ,0x37 ,0x07 ,0x10 ,0x03 ,0x0E ,0x09 ,0x00 , +-1 ,0xE1 ,0x00 ,0x0E ,0x14 ,0x03 ,0x11 ,0x07 ,0x31 ,0xC1 ,0x48 ,0x08 ,0x0F ,0x0C ,0x31 ,0x36 ,0x0F , +-1 ,0x11 , +-2 ,120 , +-1 ,0x29 , +-1 ,0x2c , +-3 +};/* Supported displays in alphabetical order */ static struct fbtft_device_display displays[] = {
@@ -486,7 +563,7 @@ static struct fbtft_device_display displays[] = { }, .startbyte = 0b01110000, .bgr = true, - .fps= 50, + .fps = 50, .gpios = (const struct fbtft_gpio []) { {"reset" ,25 }, {"led" ,18 },
@@ -532,8 +609,8 @@ static struct fbtft_device_display displays[] = { .gpios = (const struct fbtft_gpio []) {/* Wiring for LCD adapter kit */ {"reset" ,7 }, - {"dc" ,0 },/* rev 2: 2 */ - {"wr" ,1 },/* rev 2: 3 */ + {"dc" ,0 },/* rev 2: 2 */ + {"wr" ,1 },/* rev 2: 3 */ {"cs" ,8 }, {"db00" ,17 }, {"db01" ,18 },
Signature · 1 line
2.3.1
Greg KH
maintainerQuoted 9 lines · Matteo Semenzato
From: Matteo Semenzato <[email protected]>
This patch fixes the following error:
space required after that ';'Signed-off-by Matteo Semenzato <[email protected]>--- drivers/staging/fbtft/fbtft_device.c | 145 +++++++++++++++++++++++++++-------- 1 file changed, 111 insertions(+), 34 deletions(-)
You have to say what the difference between this one, and v1, otherwise I'll just guess and say it is broken and throw away both of them :(
Please fix and resend.
Quoted 58 lines · Matteo Semenzato
static int hy28b_init_sequence[] = {
drivers/staging/fbtft/fbtft_device.c +44
-13--1 ,0x00e7 ,0x0010 ,-1 ,0x0000 ,0x0001 ,-1 ,0x0001 ,0x0100 ,-1 ,0x0002 ,0x0700 , --1 ,0x0003 ,0x1030 ,-1 ,0x0004 ,0x0000 ,-1 ,0x0008 ,0x0207 ,-1 ,0x0009 ,0x0000 , --1 ,0x000a ,0x0000 ,-1 ,0x000c ,0x0001 ,-1 ,0x000d ,0x0000 ,-1 ,0x000f ,0x0000 , --1 ,0x0010 ,0x0000 ,-1 ,0x0011 ,0x0007 ,-1 ,0x0012 ,0x0000 ,-1 ,0x0013 ,0x0000 , --2 ,50 ,-1 ,0x0010 ,0x1590 ,-1 ,0x0011 ,0x0227 ,-2 ,50 ,-1 ,0x0012 ,0x009c ,-2 ,50 , --1 ,0x0013 ,0x1900 ,-1 ,0x0029 ,0x0023 ,-1 ,0x002b ,0x000e ,-2 ,50 , --1 ,0x0020 ,0x0000 ,-1 ,0x0021 ,0x0000 ,-2 ,50 ,-1 ,0x0050 ,0x0000 , --1 ,0x0051 ,0x00ef ,-1 ,0x0052 ,0x0000 ,-1 ,0x0053 ,0x013f ,-1 ,0x0060 ,0xa700 , --1 ,0x0061 ,0x0001 ,-1 ,0x006a ,0x0000 ,-1 ,0x0080 ,0x0000 ,-1 ,0x0081 ,0x0000 , --1 ,0x0082 ,0x0000 ,-1 ,0x0083 ,0x0000 ,-1 ,0x0084 ,0x0000 ,-1 ,0x0085 ,0x0000 , --1 ,0x0090 ,0x0010 ,-1 ,0x0092 ,0x0000 ,-1 ,0x0093 ,0x0003 ,-1 ,0x0095 ,0x0110 , --1 ,0x0097 ,0x0000 ,-1 ,0x0098 ,0x0000 ,-1 ,0x0007 ,0x0133 ,-1 ,0x0020 ,0x0000 , - -1,0x0021,0x0000,-2,100,-3 }; +-1 ,0x00e7 ,0x0010 , +-1 ,0x0000 ,0x0001 , +-1 ,0x0001 ,0x0100 , +-1 ,0x0002 ,0x0700 , +-1 ,0x0003 ,0x1030 , +-1 ,0x0004 ,0x0000 , +-1 ,0x0008 ,0x0207 , +-1 ,0x0009 ,0x0000 , +-1 ,0x000a ,0x0000 , +-1 ,0x000c ,0x0001 , +-1 ,0x000d ,0x0000 , +-1 ,0x000f ,0x0000 , +-1 ,0x0010 ,0x0000 , +-1 ,0x0011 ,0x0007 , +-1 ,0x0012 ,0x0000 , +-1 ,0x0013 ,0x0000 , +-2 ,50 , +-1 ,0x0010 ,0x1590 , +-1 ,0x0011 ,0x0227 , +-2 ,50 , +-1 ,0x0012 ,0x009c , +-2 ,50 , +-1 ,0x0013 ,0x1900 , +-1 ,0x0029 ,0x0023 , +-1 ,0x002b ,0x000e , +-2 ,50 , +-1 ,0x0020 ,0x0000 , +-1 ,0x0021 ,0x0000 , +-2 ,50 , +-1 ,0x0050 ,0x0000 , +-1 ,0x0051 ,0x00ef , +-1 ,0x0052 ,0x0000 , +-1 ,0x0053 ,0x013f , +-1 ,0x0060 ,0xa700 , +-1 ,0x0061 ,0x0001 , +-1 ,0x006a ,0x0000 , +-1 ,0x0080 ,0x0000 , +-1 ,0x0081 ,0x0000 , +-1 ,0x0082 ,0x0000 , +-1 ,0x0083 ,0x0000 , +-1 ,0x0084 ,0x0000 , +-1 ,0x0085 ,0x0000 , +-1 ,0x0090 ,0x0010 , + -1, 0x0092, 0x0000,
drivers/staging/fbtft/fbtft_device.c static void adafruit18_green_tab_set_addr_win(struct fbtft_par *par, · line 192
Quoted 10 lines
drivers/staging/fbtft/fbtft_device.c +10
-0+-1 ,0x0093 ,0x0003 , +-1 ,0x0095 ,0x0110 , +-1 ,0x0097 ,0x0000 , +-1 ,0x0098 ,0x0000 , +-1 ,0x0007 ,0x0133 , +-1 ,0x0020 ,0x0000 , +-1 ,0x0021 ,0x0000 , +-2 ,100 , +-3 +};
For some reason you put the line breaks at the negative numbers? Why?
regards,
dan carpenter
Il giorno lun, 02/03/2015 alle 12.29 +0300, Dan Carpenter ha scritto:
Quoted 72 lines · Matteo Semenzato
Quoted 58 lines
static int hy28b_init_sequence[] = {
drivers/staging/fbtft/fbtft_device.c +44
-13--1 ,0x00e7 ,0x0010 ,-1 ,0x0000 ,0x0001 ,-1 ,0x0001 ,0x0100 ,-1 ,0x0002 ,0x0700 , --1 ,0x0003 ,0x1030 ,-1 ,0x0004 ,0x0000 ,-1 ,0x0008 ,0x0207 ,-1 ,0x0009 ,0x0000 , --1 ,0x000a ,0x0000 ,-1 ,0x000c ,0x0001 ,-1 ,0x000d ,0x0000 ,-1 ,0x000f ,0x0000 , --1 ,0x0010 ,0x0000 ,-1 ,0x0011 ,0x0007 ,-1 ,0x0012 ,0x0000 ,-1 ,0x0013 ,0x0000 , --2 ,50 ,-1 ,0x0010 ,0x1590 ,-1 ,0x0011 ,0x0227 ,-2 ,50 ,-1 ,0x0012 ,0x009c ,-2 ,50 , --1 ,0x0013 ,0x1900 ,-1 ,0x0029 ,0x0023 ,-1 ,0x002b ,0x000e ,-2 ,50 , --1 ,0x0020 ,0x0000 ,-1 ,0x0021 ,0x0000 ,-2 ,50 ,-1 ,0x0050 ,0x0000 , --1 ,0x0051 ,0x00ef ,-1 ,0x0052 ,0x0000 ,-1 ,0x0053 ,0x013f ,-1 ,0x0060 ,0xa700 , --1 ,0x0061 ,0x0001 ,-1 ,0x006a ,0x0000 ,-1 ,0x0080 ,0x0000 ,-1 ,0x0081 ,0x0000 , --1 ,0x0082 ,0x0000 ,-1 ,0x0083 ,0x0000 ,-1 ,0x0084 ,0x0000 ,-1 ,0x0085 ,0x0000 , --1 ,0x0090 ,0x0010 ,-1 ,0x0092 ,0x0000 ,-1 ,0x0093 ,0x0003 ,-1 ,0x0095 ,0x0110 , --1 ,0x0097 ,0x0000 ,-1 ,0x0098 ,0x0000 ,-1 ,0x0007 ,0x0133 ,-1 ,0x0020 ,0x0000 , - -1,0x0021,0x0000,-2,100,-3 }; +-1 ,0x00e7 ,0x0010 , +-1 ,0x0000 ,0x0001 , +-1 ,0x0001 ,0x0100 , +-1 ,0x0002 ,0x0700 , +-1 ,0x0003 ,0x1030 , +-1 ,0x0004 ,0x0000 , +-1 ,0x0008 ,0x0207 , +-1 ,0x0009 ,0x0000 , +-1 ,0x000a ,0x0000 , +-1 ,0x000c ,0x0001 , +-1 ,0x000d ,0x0000 , +-1 ,0x000f ,0x0000 , +-1 ,0x0010 ,0x0000 , +-1 ,0x0011 ,0x0007 , +-1 ,0x0012 ,0x0000 , +-1 ,0x0013 ,0x0000 , +-2 ,50 , +-1 ,0x0010 ,0x1590 , +-1 ,0x0011 ,0x0227 , +-2 ,50 , +-1 ,0x0012 ,0x009c , +-2 ,50 , +-1 ,0x0013 ,0x1900 , +-1 ,0x0029 ,0x0023 , +-1 ,0x002b ,0x000e , +-2 ,50 , +-1 ,0x0020 ,0x0000 , +-1 ,0x0021 ,0x0000 , +-2 ,50 , +-1 ,0x0050 ,0x0000 , +-1 ,0x0051 ,0x00ef , +-1 ,0x0052 ,0x0000 , +-1 ,0x0053 ,0x013f , +-1 ,0x0060 ,0xa700 , +-1 ,0x0061 ,0x0001 , +-1 ,0x006a ,0x0000 , +-1 ,0x0080 ,0x0000 , +-1 ,0x0081 ,0x0000 , +-1 ,0x0082 ,0x0000 , +-1 ,0x0083 ,0x0000 , +-1 ,0x0084 ,0x0000 , +-1 ,0x0085 ,0x0000 , +-1 ,0x0090 ,0x0010 , + -1, 0x0092, 0x0000,drivers/staging/fbtft/fbtft_device.c static void adafruit18_green_tab_set_addr_win(struct fbtft_par *par, · line 192
Quoted 10 lines
drivers/staging/fbtft/fbtft_device.c +10
-0+-1 ,0x0093 ,0x0003 , +-1 ,0x0095 ,0x0110 , +-1 ,0x0097 ,0x0000 , +-1 ,0x0098 ,0x0000 , +-1 ,0x0007 ,0x0133 , +-1 ,0x0020 ,0x0000 , +-1 ,0x0021 ,0x0000 , +-2 ,100 , +-3 +};For some reason you put the line breaks at the negative numbers? Why?
Quoted 3 lines
regards,
dan carpenter
-1, -2 and -3 are the init sequence markers: -1: command begin, -2:
millisecond delay, -3: end of init sequence
Quoted 8 lines · Matteo Semenzato
Quoted 6 lines
For some reason you put the line breaks at the negative numbers? Why?
regards,
dan carpenter-1, -2 and -3 are the init sequence markers: -1: command begin, -2:
millisecond delay, -3: end of init sequence
Cool. Put that in the changelog.
regards,
dan carpenter
PATCH v2 1/1 Staging: fbtft: fix coding style errors
In reply to Matteo SemenzatoFrom: Matteo Semenzato <[email protected]>
This patch fixes the following error:
space required after that ';'
V2: Indented and organized the init sequences.
--- drivers/staging/fbtft/fbtft_device.c | 145 +++++++++++++++++++++++++++-------- 1 file changed, 111 insertions(+), 34 deletions(-)
drivers/staging/fbtft/fbtft_device.c +111 -34
@@ -61,7 +61,7 @@ MODULE_PARM_DESC(mode, "SPI mode (override device default)");static char *gpios;module_param (gpios, charp,0 );MODULE_PARM_DESC (gpios, -"List of gpios. Comma separated with the form: reset:23,dc:24 " \ +"List of gpios. Comma separated with the form: reset:23, dc:24 " \"(when overriding the default, all gpios must be specified)" );static unsigned fps;
@@ -109,7 +109,7 @@ module_param_array(init, int, &init_num, 0);MODULE_PARM_DESC (init,"Init sequence, used with the custom argument" );static unsigned long debug; -module_param (debug, ulong ,0 ); +module_param (debug, ulong,0 );MODULE_PARM_DESC (debug,"level: 0-7 (the remaining 29 bits is for advanced usage)" );
@@ -136,43 +136,120 @@ static void adafruit18_green_tab_set_addr_win(struct fbtft_par *par,"03 1d 07 06 2E 2C 29 2D 2E 2E 37 3F 00 00 02 10" static int hy28b_init_sequence[] = { --1 ,0x00e7 ,0x0010 ,-1 ,0x0000 ,0x0001 ,-1 ,0x0001 ,0x0100 ,-1 ,0x0002 ,0x0700 , --1 ,0x0003 ,0x1030 ,-1 ,0x0004 ,0x0000 ,-1 ,0x0008 ,0x0207 ,-1 ,0x0009 ,0x0000 , --1 ,0x000a ,0x0000 ,-1 ,0x000c ,0x0001 ,-1 ,0x000d ,0x0000 ,-1 ,0x000f ,0x0000 , --1 ,0x0010 ,0x0000 ,-1 ,0x0011 ,0x0007 ,-1 ,0x0012 ,0x0000 ,-1 ,0x0013 ,0x0000 , --2 ,50 ,-1 ,0x0010 ,0x1590 ,-1 ,0x0011 ,0x0227 ,-2 ,50 ,-1 ,0x0012 ,0x009c ,-2 ,50 , --1 ,0x0013 ,0x1900 ,-1 ,0x0029 ,0x0023 ,-1 ,0x002b ,0x000e ,-2 ,50 , --1 ,0x0020 ,0x0000 ,-1 ,0x0021 ,0x0000 ,-2 ,50 ,-1 ,0x0050 ,0x0000 , --1 ,0x0051 ,0x00ef ,-1 ,0x0052 ,0x0000 ,-1 ,0x0053 ,0x013f ,-1 ,0x0060 ,0xa700 , --1 ,0x0061 ,0x0001 ,-1 ,0x006a ,0x0000 ,-1 ,0x0080 ,0x0000 ,-1 ,0x0081 ,0x0000 , --1 ,0x0082 ,0x0000 ,-1 ,0x0083 ,0x0000 ,-1 ,0x0084 ,0x0000 ,-1 ,0x0085 ,0x0000 , --1 ,0x0090 ,0x0010 ,-1 ,0x0092 ,0x0000 ,-1 ,0x0093 ,0x0003 ,-1 ,0x0095 ,0x0110 , --1 ,0x0097 ,0x0000 ,-1 ,0x0098 ,0x0000 ,-1 ,0x0007 ,0x0133 ,-1 ,0x0020 ,0x0000 , - -1,0x0021,0x0000,-2,100,-3 }; +-1 ,0x00e7 ,0x0010 , +-1 ,0x0000 ,0x0001 , +-1 ,0x0001 ,0x0100 , +-1 ,0x0002 ,0x0700 , +-1 ,0x0003 ,0x1030 , +-1 ,0x0004 ,0x0000 , +-1 ,0x0008 ,0x0207 , +-1 ,0x0009 ,0x0000 , +-1 ,0x000a ,0x0000 , +-1 ,0x000c ,0x0001 , +-1 ,0x000d ,0x0000 , +-1 ,0x000f ,0x0000 , +-1 ,0x0010 ,0x0000 , +-1 ,0x0011 ,0x0007 , +-1 ,0x0012 ,0x0000 , +-1 ,0x0013 ,0x0000 , +-2 ,50 , +-1 ,0x0010 ,0x1590 , +-1 ,0x0011 ,0x0227 , +-2 ,50 , +-1 ,0x0012 ,0x009c , +-2 ,50 , +-1 ,0x0013 ,0x1900 , +-1 ,0x0029 ,0x0023 , +-1 ,0x002b ,0x000e , +-2 ,50 , +-1 ,0x0020 ,0x0000 , +-1 ,0x0021 ,0x0000 , +-2 ,50 , +-1 ,0x0050 ,0x0000 , +-1 ,0x0051 ,0x00ef , +-1 ,0x0052 ,0x0000 , +-1 ,0x0053 ,0x013f , +-1 ,0x0060 ,0xa700 , +-1 ,0x0061 ,0x0001 , +-1 ,0x006a ,0x0000 , +-1 ,0x0080 ,0x0000 , +-1 ,0x0081 ,0x0000 , +-1 ,0x0082 ,0x0000 , +-1 ,0x0083 ,0x0000 , +-1 ,0x0084 ,0x0000 , +-1 ,0x0085 ,0x0000 , +-1 ,0x0090 ,0x0010 , +-1 ,0x0092 ,0x0000 , +-1 ,0x0093 ,0x0003 , +-1 ,0x0095 ,0x0110 , +-1 ,0x0097 ,0x0000 , +-1 ,0x0098 ,0x0000 , +-1 ,0x0007 ,0x0133 , +-1 ,0x0020 ,0x0000 , +-1 ,0x0021 ,0x0000 , +-2 ,100 , +-3 +};#define HY28B_GAMMA \ "04 1F 4 7 7 0 7 7 6 0\n" \ "0F 00 1 7 4 0 0 0 6 7"static int pitft_init_sequence[] = { --1 ,0x01 ,-2 ,5 ,-1 ,0x28 ,-1 ,0xEF ,0x03 ,0x80 ,0x02 ,-1 ,0xCF ,0x00 ,0xC1 ,0x30 , --1 ,0xED ,0x64 ,0x03 ,0x12 ,0x81 ,-1 ,0xE8 ,0x85 ,0x00 ,0x78 , --1 ,0xCB ,0x39 ,0x2C ,0x00 ,0x34 ,0x02 ,-1 ,0xF7 ,0x20 ,-1 ,0xEA ,0x00 ,0x00 , --1 ,0xC0 ,0x23 ,-1 ,0xC1 ,0x10 ,-1 ,0xC5 ,0x3e ,0x28 ,-1 ,0xC7 ,0x86 ,-1 ,0x3A ,0x55 , --1 ,0xB1 ,0x00 ,0x18 ,-1 ,0xB6 ,0x08 ,0x82 ,0x27 ,-1 ,0xF2 ,0x00 ,-1 ,0x26 ,0x01 , --1 ,0xE0 ,0x0F ,0x31 ,0x2B ,0x0C ,0x0E ,0x08 ,0x4E ,0xF1 ,0x37 ,0x07 ,0x10 ,0x03 , -0x0E ,0x09 ,0x00 ,-1 ,0xE1 ,0x00 ,0x0E ,0x14 ,0x03 ,0x11 ,0x07 ,0x31 ,0xC1 ,0x48 , -0x08 ,0x0F ,0x0C ,0x31 ,0x36 ,0x0F ,-1 ,0x11 ,-2 ,100 ,-1 ,0x29 ,-2 ,20 ,-3 }; +-1 ,0x01 , +-2 ,5 , +-1 ,0x28 , +-1 ,0xEF ,0x03 ,0x80 ,0x02 , +-1 ,0xCF ,0x00 ,0xC1 ,0x30 , +-1 ,0xED ,0x64 ,0x03 ,0x12 ,0x81 , +-1 ,0xE8 ,0x85 ,0x00 ,0x78 , +-1 ,0xCB ,0x39 ,0x2C ,0x00 ,0x34 ,0x02 , +-1 ,0xF7 ,0x20 , +-1 ,0xEA ,0x00 ,0x00 , +-1 ,0xC0 ,0x23 , +-1 ,0xC1 ,0x10 , +-1 ,0xC5 ,0x3e ,0x28 , +-1 ,0xC7 ,0x86 , +-1 ,0x3A ,0x55 , +-1 ,0xB1 ,0x00 ,0x18 , +-1 ,0xB6 ,0x08 ,0x82 ,0x27 , +-1 ,0xF2 ,0x00 , +-1 ,0x26 ,0x01 , +-1 ,0xE0 ,0x0F ,0x31 ,0x2B ,0x0C ,0x0E ,0x08 ,0x4E ,0xF1 ,0x37 ,0x07 ,0x10 ,0x03 ,0x0E ,0x09 ,0x00 , +-1 ,0xE1 ,0x00 ,0x0E ,0x14 ,0x03 ,0x11 ,0x07 ,0x31 ,0xC1 ,0x48 ,0x0E ,0x09 ,0x00 , +-1 ,0xE1 ,0x00 ,0x0E ,0x14 ,0x03 ,0x11 ,0x07 ,0x31 ,0xC1 ,0x48 , +0x08 ,0x0F ,0x0C ,0x31 ,0x36 ,0x0F , +-1 ,0x11 , +-2 ,100 , +-1 ,0x29 , +-2 ,20 , +-3 +};static int waveshare32b_init_sequence[] = { --1 ,0xCB ,0x39 ,0x2C ,0x00 ,0x34 ,0x02 ,-1 ,0xCF ,0x00 ,0xC1 ,0x30 , --1 ,0xE8 ,0x85 ,0x00 ,0x78 ,-1 ,0xEA ,0x00 ,0x00 ,-1 ,0xED ,0x64 ,0x03 ,0x12 ,0x81 , --1 ,0xF7 ,0x20 ,-1 ,0xC0 ,0x23 ,-1 ,0xC1 ,0x10 ,-1 ,0xC5 ,0x3e ,0x28 ,-1 ,0xC7 ,0x86 , --1 ,0x36 ,0x28 ,-1 ,0x3A ,0x55 ,-1 ,0xB1 ,0x00 ,0x18 ,-1 ,0xB6 ,0x08 ,0x82 ,0x27 , --1 ,0xF2 ,0x00 ,-1 ,0x26 ,0x01 , --1 ,0xE0 ,0x0F ,0x31 ,0x2B ,0x0C ,0x0E ,0x08 ,0x4E ,0xF1 ,0x37 ,0x07 ,0x10 ,0x03 ,0x0E ,0x09 ,0x00 , --1 ,0xE1 ,0x00 ,0x0E ,0x14 ,0x03 ,0x11 ,0x07 ,0x31 ,0xC1 ,0x48 ,0x08 ,0x0F ,0x0C ,0x31 ,0x36 ,0x0F , --1 ,0x11 ,-2 ,120 ,-1 ,0x29 ,-1 ,0x2c ,-3 }; +-1 ,0xCB ,0x39 ,0x2C ,0x00 ,0x34 ,0x02 , +-1 ,0xCF ,0x00 ,0xC1 ,0x30 , +-1 ,0xE8 ,0x85 ,0x00 ,0x78 , +-1 ,0xEA ,0x00 ,0x00 , +-1 ,0xED ,0x64 ,0x03 ,0x12 ,0x81 , +-1 ,0xF7 ,0x20 ,-1 ,0xC0 ,0x23 , +-1 ,0xC1 ,0x10 , +-1 ,0xC5 ,0x3e ,0x28 , +-1 ,0xC7 ,0x86 , +-1 ,0x36 ,0x28 , +-1 ,0x3A ,0x55 , +-1 ,0xB1 ,0x00 ,0x18 , +-1 ,0xB6 ,0x08 ,0x82 ,0x27 , +-1 ,0xF2 ,0x00 , +-1 ,0x26 ,0x01 , +-1 ,0xE0 ,0x0F ,0x31 ,0x2B ,0x0C ,0x0E ,0x08 ,0x4E ,0xF1 ,0x37 ,0x07 ,0x10 ,0x03 ,0x0E ,0x09 ,0x00 , +-1 ,0xE1 ,0x00 ,0x0E ,0x14 ,0x03 ,0x11 ,0x07 ,0x31 ,0xC1 ,0x48 ,0x08 ,0x0F ,0x0C ,0x31 ,0x36 ,0x0F , +-1 ,0x11 , +-2 ,120 , +-1 ,0x29 , +-1 ,0x2c , +-3 +};/* Supported displays in alphabetical order */ static struct fbtft_device_display displays[] = {
@@ -486,7 +563,7 @@ static struct fbtft_device_display displays[] = { }, .startbyte = 0b01110000, .bgr = true, - .fps= 50, + .fps = 50, .gpios = (const struct fbtft_gpio []) { {"reset" ,25 }, {"led" ,18 },
@@ -532,8 +609,8 @@ static struct fbtft_device_display displays[] = { .gpios = (const struct fbtft_gpio []) {/* Wiring for LCD adapter kit */ {"reset" ,7 }, - {"dc" ,0 },/* rev 2: 2 */ - {"wr" ,1 },/* rev 2: 3 */ + {"dc" ,0 },/* rev 2: 2 */ + {"wr" ,1 },/* rev 2: 3 */ {"cs" ,8 }, {"db00" ,17 }, {"db01" ,18 },
Signature · 1 line
2.3.1