Skip to contentSkip to conversation

xen/arm: Add support for Huawei hip04-d01 platform

PATCH Superseded Frediano Ziglio 4 participants 18 messages Mar 3, 2015 – Mar 9, 2015

v8 of 9 Superseded Latest is v9 →

lore
Share & tools
lore
#0 lore raw

v8 cover xen/arm: Add support for Huawei hip04-d01 platform

This set of patches add Xen support for hip04-d01 platform (see
https://wiki.linaro.org/Boards/D01 for details).

Changes from v7:
- updated patches;
- moved interrupt controller check in a separate patch (Ian Campbell);
- changed conditional include of gic-hip04.c in Makefile (Ian Campbell);
- added MAINTAINERS update (Ian Campbell).

Changes from v6:
- collapsed some patch (Julien Grall);
- remove useless check for irq values;
- test interrupt controller not using DT compatibility;
- remove non standard drivers flag (Ian Campbell).

Changes from V5.99.1:
- removed RFC again;
- use different constants for hip04 instead of redefine standard ones;
- comment compatible string change;
- add an option to ARM to enable non standard drivers;
- rename gicv2 to hip04gic to make clear this is not a standard gic.

Changes from v5:
- do not change gic-v2.c code but use a copy.

To be considered RFC, to see if better to use copy or other techniques.

Changes from v4:
- rebased to new version;
- removed patch for computing GIC addresses as it apply to all platforms;
- removed patches to platform (cpu and system operations) as now they can use a bootwrapper which provide them.

Changes from v3:
- change the way regs property is computed for GICv2 (Julien Grall);
- revert order of compaible names for GIC (Julien Grall).

Changes from v2:
- rewrote DTS fix patch (Ian Campbell);
- use is_hip04 macro instead of doing explicit test (Julien Grall);
- do not use quirks to distinguish this platform (Ian Cambell);
- move some GIC constants to C files instead of header (Julien Grall);
- minor changes (Julien Grall).

Changes from v1:
- style (Julien Grall);
- make gicv2_send_SGI faster (Julien Grall);
- cleanup correctly if hip04_smp_init fails (Julien Grall);
- remove quirks using compatibility (Ian Campbell);
- other minor suggestions by Julien Grall.

Frediano Ziglio (4):
xen/arm: Duplicate gic-v2.c file to support hip04 platform version xen/arm: Check for interrupt controller directly xen/arm: Make gic-v2 code handle hip04-d01 platform xen/arm: Force dom0 to use normal GICv2 driver on Hip04 platform

 MAINTAINERS                 |   5 +
 xen/arch/arm/Makefile       |   1 +
 xen/arch/arm/domain_build.c |   2 +-
 xen/arch/arm/gic-hip04.c    | 815 ++++++++++++++++++++++++++++++++++++++++++++
 xen/include/asm-arm/gic.h   |   4 +-
 5 files changed, 825 insertions(+), 2 deletions(-)
 create mode 100644 xen/arch/arm/gic-hip04.c
Signature · 1 line
1.9.1
#1 lore raw

PATCH v8 1/4 xen/arm: Duplicate gic-v2.c file to support hip04 platform version

HiSilison Hip04 platform use a slightly different version. This is just a verbatim copy of the file to workaround git not fully supporting copy operation.

---
 xen/arch/arm/gic-hip04.c | 801 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 801 insertions(+)
 create mode 100644 xen/arch/arm/gic-hip04.c
xen/arch/arm/gic-hip04.c new file +801 -0
new file mode 100644
index 0000000..20cdbc9
@@ -0,0 +1,801 @@
+/*
+ * xen/arch/arm/gic-v2.c
+ *
+ * ARM Generic Interrupt Controller support v2
+ *
+ * Tim Deegan <[email protected]>
+ * Copyright (c) 2011 Citrix Systems.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <xen/config.h>
+#include <xen/lib.h>
+#include <xen/init.h>
+#include <xen/mm.h>
+#include <xen/irq.h>
+#include <xen/sched.h>
+#include <xen/errno.h>
+#include <xen/softirq.h>
+#include <xen/list.h>
+#include <xen/device_tree.h>
+#include <xen/libfdt/libfdt.h>
+#include <asm/p2m.h>
+#include <asm/domain.h>
+#include <asm/platform.h>
+#include <asm/device.h>
+
+#include <asm/io.h>
+#include <asm/gic.h>
+
+/*
+ * LR register definitions are GIC v2 specific.
+ * Moved these definitions from header file to here
+ */
+#define GICH_V2_LR_VIRTUAL_MASK    0x3ff
+#define GICH_V2_LR_VIRTUAL_SHIFT   0
+#define GICH_V2_LR_PHYSICAL_MASK   0x3ff
+#define GICH_V2_LR_PHYSICAL_SHIFT  10
+#define GICH_V2_LR_STATE_MASK      0x3
+#define GICH_V2_LR_STATE_SHIFT     28
+#define GICH_V2_LR_PRIORITY_SHIFT  23
+#define GICH_V2_LR_PRIORITY_MASK   0x1f
+#define GICH_V2_LR_HW_SHIFT        31
+#define GICH_V2_LR_HW_MASK         0x1
+#define GICH_V2_LR_GRP_SHIFT       30
+#define GICH_V2_LR_GRP_MASK        0x1
+#define GICH_V2_LR_MAINTENANCE_IRQ (1<<19)
+#define GICH_V2_LR_GRP1            (1<<30)
+#define GICH_V2_LR_HW              (1<<31)
+#define GICH_V2_LR_CPUID_SHIFT     9
+#define GICH_V2_VTR_NRLRGS         0x3f
+
+#define GICH_V2_VMCR_PRIORITY_MASK   0x1f
+#define GICH_V2_VMCR_PRIORITY_SHIFT  27
+
+/* Global state */
+static struct {
+    paddr_t dbase;            /* Address of distributor registers */
+    void __iomem * map_dbase; /* IO mapped Address of distributor registers */
+    paddr_t cbase;            /* Address of CPU interface registers */
+    void __iomem * map_cbase[2]; /* IO mapped Address of CPU interface registers */
+    paddr_t hbase;            /* Address of virtual interface registers */
+    void __iomem * map_hbase; /* IO Address of virtual interface registers */
+    paddr_t vbase;            /* Address of virtual cpu interface registers */
+    spinlock_t lock;
+} gicv2;
+
+static struct gic_info gicv2_info;
+
+/* The GIC mapping of CPU interfaces does not necessarily match the
+ * logical CPU numbering. Let's use mapping as returned by the GIC
+ * itself
+ */
+static DEFINE_PER_CPU(u8, gic_cpu_id);
+
+/* Maximum cpu interface per GIC */
+#define NR_GIC_CPU_IF 8
+
+static inline void writeb_gicd(uint8_t val, unsigned int offset)
+{
+    writeb_relaxed(val, gicv2.map_dbase + offset);
+}
+
+static inline void writel_gicd(uint32_t val, unsigned int offset)
+{
+    writel_relaxed(val, gicv2.map_dbase + offset);
+}
+
+static inline uint32_t readl_gicd(unsigned int offset)
+{
+    return readl_relaxed(gicv2.map_dbase + offset);
+}
+
+static inline void writel_gicc(uint32_t val, unsigned int offset)
+{
+    unsigned int page = offset >> PAGE_SHIFT;
+    offset &= ~PAGE_MASK;
+    writel_relaxed(val, gicv2.map_cbase[page] + offset);
+}
+
+static inline uint32_t readl_gicc(unsigned int offset)
+{
+    unsigned int page = offset >> PAGE_SHIFT;
+    offset &= ~PAGE_MASK;
+    return readl_relaxed(gicv2.map_cbase[page] + offset);
+}
+
+static inline void writel_gich(uint32_t val, unsigned int offset)
+{
+    writel_relaxed(val, gicv2.map_hbase + offset);
+}
+
+static inline uint32_t readl_gich(int unsigned offset)
+{
+    return readl_relaxed(gicv2.map_hbase + offset);
+}
+
+static unsigned int gicv2_cpu_mask(const cpumask_t *cpumask)
+{
+    unsigned int cpu;
+    unsigned int mask = 0;
+    cpumask_t possible_mask;
+
+    cpumask_and(&possible_mask, cpumask, &cpu_possible_map);
+    for_each_cpu( cpu, &possible_mask )
+    {
+        ASSERT(cpu < NR_GIC_CPU_IF);
+        mask |= per_cpu(gic_cpu_id, cpu);
+    }
+
+    return mask;
+}
+
+static void gicv2_save_state(struct vcpu *v)
+{
+    int i;
+
+    /* No need for spinlocks here because interrupts are disabled around
+     * this call and it only accesses struct vcpu fields that cannot be
+     * accessed simultaneously by another pCPU.
+     */
+    for ( i = 0; i < gicv2_info.nr_lrs; i++ )
+        v->arch.gic.v2.lr[i] = readl_gich(GICH_LR + i * 4);
+
+    v->arch.gic.v2.apr = readl_gich(GICH_APR);
+    v->arch.gic.v2.vmcr = readl_gich(GICH_VMCR);
+    /* Disable until next VCPU scheduled */
+    writel_gich(0, GICH_HCR);
+}
+
+static void gicv2_restore_state(const struct vcpu *v)
+{
+    int i;
+
+    for ( i = 0; i < gicv2_info.nr_lrs; i++ )
+        writel_gich(v->arch.gic.v2.lr[i], GICH_LR + i * 4);
+
+    writel_gich(v->arch.gic.v2.apr, GICH_APR);
+    writel_gich(v->arch.gic.v2.vmcr, GICH_VMCR);
+    writel_gich(GICH_HCR_EN, GICH_HCR);
+}
+
+static void gicv2_dump_state(const struct vcpu *v)
+{
+    int i;
+
+    if ( v == current )
+    {
+        for ( i = 0; i < gicv2_info.nr_lrs; i++ )
+            printk("   HW_LR[%d]=%x\n", i,
+                   readl_gich(GICH_LR + i * 4));
+    }
+    else
+    {
+        for ( i = 0; i < gicv2_info.nr_lrs; i++ )
+            printk("   VCPU_LR[%d]=%x\n", i, v->arch.gic.v2.lr[i]);
+    }
+}
+
+static void gicv2_eoi_irq(struct irq_desc *irqd)
+{
+    int irq = irqd->irq;
+    /* Lower the priority */
+    writel_gicc(irq, GICC_EOIR);
+}
+
+static void gicv2_dir_irq(struct irq_desc *irqd)
+{
+    /* Deactivate */
+    writel_gicc(irqd->irq, GICC_DIR);
+}
+
+static unsigned int gicv2_read_irq(void)
+{
+    return (readl_gicc(GICC_IAR) & GICC_IA_IRQ);
+}
+
+/*
+ * needs to be called with a valid cpu_mask, ie each cpu in the mask has
+ * already called gic_cpu_init
+ */
+static void gicv2_set_irq_properties(struct irq_desc *desc,
+                                   const cpumask_t *cpu_mask,
+                                   unsigned int priority)
+{
+    uint32_t cfg, actual, edgebit;
+    unsigned int mask = gicv2_cpu_mask(cpu_mask);
+    unsigned int irq = desc->irq;
+    unsigned int type = desc->arch.type;
+
+    ASSERT(type != DT_IRQ_TYPE_INVALID);
+    ASSERT(spin_is_locked(&desc->lock));
+
+    spin_lock(&gicv2.lock);
+    /* Set edge / level */
+    cfg = readl_gicd(GICD_ICFGR + (irq / 16) * 4);
+    edgebit = 2u << (2 * (irq % 16));
+    if ( type & DT_IRQ_TYPE_LEVEL_MASK )
+        cfg &= ~edgebit;
+    else if ( type & DT_IRQ_TYPE_EDGE_BOTH )
+        cfg |= edgebit;
+    writel_gicd(cfg, GICD_ICFGR + (irq / 16) * 4);
+
+    actual = readl_gicd(GICD_ICFGR + (irq / 16) * 4);
+    if ( ( cfg & edgebit ) ^ ( actual & edgebit ) )
+    {
+        printk(XENLOG_WARNING "GICv2: WARNING: "
+               "CPU%d: Failed to configure IRQ%u as %s-triggered. "
+               "H/w forces to %s-triggered.\n",
+               smp_processor_id(), desc->irq,
+               cfg & edgebit ? "Edge" : "Level",
+               actual & edgebit ? "Edge" : "Level");
+        desc->arch.type = actual & edgebit ?
+            DT_IRQ_TYPE_EDGE_RISING :
+            DT_IRQ_TYPE_LEVEL_HIGH;
+    }
+
+    /* Set target CPU mask (RAZ/WI on uniprocessor) */
+    writeb_gicd(mask, GICD_ITARGETSR + irq);
+    /* Set priority */
+    writeb_gicd(priority, GICD_IPRIORITYR + irq);
+
+    spin_unlock(&gicv2.lock);
+}
+
+static void __init gicv2_dist_init(void)
+{
+    uint32_t type;
+    uint32_t cpumask;
+    uint32_t gic_cpus;
+    int i;
+
+    cpumask = readl_gicd(GICD_ITARGETSR) & 0xff;
+    cpumask |= cpumask << 8;
+    cpumask |= cpumask << 16;
+
+    /* Disable the distributor */
+    writel_gicd(0, GICD_CTLR);
+
+    type = readl_gicd(GICD_TYPER);
+    gicv2_info.nr_lines = 32 * ((type & GICD_TYPE_LINES) + 1);
+    gic_cpus = 1 + ((type & GICD_TYPE_CPUS) >> 5);
+    printk("GICv2: %d lines, %d cpu%s%s (IID %8.8x).\n",
+           gicv2_info.nr_lines, gic_cpus, (gic_cpus == 1) ? "" : "s",
+           (type & GICD_TYPE_SEC) ? ", secure" : "",
+           readl_gicd(GICD_IIDR));
+
+    /* Default all global IRQs to level, active low */
+    for ( i = 32; i < gicv2_info.nr_lines; i += 16 )
+        writel_gicd(0x0, GICD_ICFGR + (i / 16) * 4);
+
+    /* Route all global IRQs to this CPU */
+    for ( i = 32; i < gicv2_info.nr_lines; i += 4 )
+        writel_gicd(cpumask, GICD_ITARGETSR + (i / 4) * 4);
+
+    /* Default priority for global interrupts */
+    for ( i = 32; i < gicv2_info.nr_lines; i += 4 )
+        writel_gicd(GIC_PRI_IRQ << 24 | GIC_PRI_IRQ << 16 |
+                    GIC_PRI_IRQ << 8 | GIC_PRI_IRQ,
+                    GICD_IPRIORITYR + (i / 4) * 4);
+
+    /* Disable all global interrupts */
+    for ( i = 32; i < gicv2_info.nr_lines; i += 32 )
+        writel_gicd(~0x0, GICD_ICENABLER + (i / 32) * 4);
+
+    /* Turn on the distributor */
+    writel_gicd(GICD_CTL_ENABLE, GICD_CTLR);
+}
+
+static void __cpuinit gicv2_cpu_init(void)
+{
+    int i;
+
+    this_cpu(gic_cpu_id) = readl_gicd(GICD_ITARGETSR) & 0xff;
+
+    /* The first 32 interrupts (PPI and SGI) are banked per-cpu, so
+     * even though they are controlled with GICD registers, they must
+     * be set up here with the other per-cpu state. */
+    writel_gicd(0xffff0000, GICD_ICENABLER); /* Disable all PPI */
+    writel_gicd(0x0000ffff, GICD_ISENABLER); /* Enable all SGI */
+
+    /* Set SGI priorities */
+    for ( i = 0; i < 16; i += 4 )
+        writel_gicd(GIC_PRI_IPI << 24 | GIC_PRI_IPI << 16 |
+                    GIC_PRI_IPI << 8 | GIC_PRI_IPI,
+                    GICD_IPRIORITYR + (i / 4) * 4);
+
+    /* Set PPI priorities */
+    for ( i = 16; i < 32; i += 4 )
+        writel_gicd(GIC_PRI_IRQ << 24 | GIC_PRI_IRQ << 16 |
+                    GIC_PRI_IRQ << 8 | GIC_PRI_IRQ,
+                    GICD_IPRIORITYR + (i / 4) * 4);
+
+    /* Local settings: interface controller */
+    /* Don't mask by priority */
+    writel_gicc(0xff, GICC_PMR);
+    /* Finest granularity of priority */
+    writel_gicc(0x0, GICC_BPR);
+    /* Turn on delivery */
+    writel_gicc(GICC_CTL_ENABLE|GICC_CTL_EOI, GICC_CTLR);
+}
+
+static void gicv2_cpu_disable(void)
+{
+    writel_gicc(0x0, GICC_CTLR);
+}
+
+static void __cpuinit gicv2_hyp_init(void)
+{
+    uint32_t vtr;
+    uint8_t nr_lrs;
+
+    vtr = readl_gich(GICH_VTR);
+    nr_lrs  = (vtr & GICH_V2_VTR_NRLRGS) + 1;
+    gicv2_info.nr_lrs = nr_lrs;
+
+    writel_gich(GICH_MISR_EOI, GICH_MISR);
+}
+
+static void __cpuinit gicv2_hyp_disable(void)
+{
+    writel_gich(0, GICH_HCR);
+}
+
+static int gicv2_secondary_cpu_init(void)
+{
+    spin_lock(&gicv2.lock);
+
+    gicv2_cpu_init();
+    gicv2_hyp_init();
+
+    spin_unlock(&gicv2.lock);
+
+    return 0;
+}
+
+static void gicv2_send_SGI(enum gic_sgi sgi, enum gic_sgi_mode irqmode,
+                           const cpumask_t *cpu_mask)
+{
+    unsigned int mask = 0;
+    cpumask_t online_mask;
+
+    switch ( irqmode )
+    {
+    case SGI_TARGET_OTHERS:
+        writel_gicd(GICD_SGI_TARGET_OTHERS | sgi, GICD_SGIR);
+        break;
+    case SGI_TARGET_SELF:
+        writel_gicd(GICD_SGI_TARGET_SELF | sgi, GICD_SGIR);
+        break;
+    case SGI_TARGET_LIST:
+        cpumask_and(&online_mask, cpu_mask, &cpu_online_map);
+        mask = gicv2_cpu_mask(&online_mask);
+        writel_gicd(GICD_SGI_TARGET_LIST |
+                    (mask << GICD_SGI_TARGET_SHIFT) | sgi,
+                    GICD_SGIR);
+        break;
+    default:
+        BUG();
+    }
+}
+
+/* Shut down the per-CPU GIC interface */
+static void gicv2_disable_interface(void)
+{
+    spin_lock(&gicv2.lock);
+    gicv2_cpu_disable();
+    gicv2_hyp_disable();
+    spin_unlock(&gicv2.lock);
+}
+
+static void gicv2_update_lr(int lr, const struct pending_irq *p,
+                            unsigned int state)
+{
+    uint32_t lr_reg;
+
+    BUG_ON(lr >= gicv2_info.nr_lrs);
+    BUG_ON(lr < 0);
+
+    lr_reg = (((state & GICH_V2_LR_STATE_MASK) << GICH_V2_LR_STATE_SHIFT)  |
+              ((GIC_PRI_TO_GUEST(p->priority) & GICH_V2_LR_PRIORITY_MASK)
+                                             << GICH_V2_LR_PRIORITY_SHIFT) |
+              ((p->irq & GICH_V2_LR_VIRTUAL_MASK) << GICH_V2_LR_VIRTUAL_SHIFT));
+
+    if ( p->desc != NULL )
+    {
+        if ( platform_has_quirk(PLATFORM_QUIRK_GUEST_PIRQ_NEED_EOI) )
+            lr_reg |= GICH_V2_LR_MAINTENANCE_IRQ;
+        else
+            lr_reg |= GICH_V2_LR_HW | ((p->desc->irq & GICH_V2_LR_PHYSICAL_MASK )
+                            << GICH_V2_LR_PHYSICAL_SHIFT);
+    }
+
+    writel_gich(lr_reg, GICH_LR + lr * 4);
+}
+
+static void gicv2_clear_lr(int lr)
+{
+    writel_gich(0, GICH_LR + lr * 4);
+}
+
+static int gicv2v_setup(struct domain *d)
+{
+    int ret;
+
+    /*
+     * The hardware domain gets the hardware address.
+     * Guests get the virtual platform layout.
+     */
+    if ( is_hardware_domain(d) )
+    {
+        d->arch.vgic.dbase = gicv2.dbase;
+        d->arch.vgic.cbase = gicv2.cbase;
+    }
+    else
+    {
+        d->arch.vgic.dbase = GUEST_GICD_BASE;
+        d->arch.vgic.cbase = GUEST_GICC_BASE;
+    }
+
+    /*
+     * Map the gic virtual cpu interface in the gic cpu interface
+     * region of the guest.
+     *
+     * The second page is always mapped at +4K irrespective of the
+     * GIC_64K_STRIDE quirk. The DTB passed to the guest reflects this.
+     */
+    ret = map_mmio_regions(d, paddr_to_pfn(d->arch.vgic.cbase), 1,
+                            paddr_to_pfn(gicv2.vbase));
+    if ( ret )
+        return ret;
+
+    if ( !platform_has_quirk(PLATFORM_QUIRK_GIC_64K_STRIDE) )
+        ret = map_mmio_regions(d, paddr_to_pfn(d->arch.vgic.cbase + PAGE_SIZE),
+                               2, paddr_to_pfn(gicv2.vbase + PAGE_SIZE));
+    else
+        ret = map_mmio_regions(d, paddr_to_pfn(d->arch.vgic.cbase + PAGE_SIZE),
+                               2, paddr_to_pfn(gicv2.vbase + 16*PAGE_SIZE));
+
+    return ret;
+}
+
+static void gicv2_read_lr(int lr, struct gic_lr *lr_reg)
+{
+    uint32_t lrv;
+
+    lrv          = readl_gich(GICH_LR + lr * 4);
+    lr_reg->pirq = (lrv >> GICH_V2_LR_PHYSICAL_SHIFT) & GICH_V2_LR_PHYSICAL_MASK;
+    lr_reg->virq = (lrv >> GICH_V2_LR_VIRTUAL_SHIFT) & GICH_V2_LR_VIRTUAL_MASK;
+    lr_reg->priority = (lrv >> GICH_V2_LR_PRIORITY_SHIFT) & GICH_V2_LR_PRIORITY_MASK;
+    lr_reg->state     = (lrv >> GICH_V2_LR_STATE_SHIFT) & GICH_V2_LR_STATE_MASK;
+    lr_reg->hw_status = (lrv >> GICH_V2_LR_HW_SHIFT) & GICH_V2_LR_HW_MASK;
+    lr_reg->grp       = (lrv >> GICH_V2_LR_GRP_SHIFT) & GICH_V2_LR_GRP_MASK;
+}
+
+static void gicv2_write_lr(int lr, const struct gic_lr *lr_reg)
+{
+    uint32_t lrv = 0;
+
+    lrv = ( ((lr_reg->pirq & GICH_V2_LR_PHYSICAL_MASK) << GICH_V2_LR_PHYSICAL_SHIFT) |
+          ((lr_reg->virq & GICH_V2_LR_VIRTUAL_MASK) << GICH_V2_LR_VIRTUAL_SHIFT)   |
+          ((uint32_t)(lr_reg->priority & GICH_V2_LR_PRIORITY_MASK)
+                                      << GICH_V2_LR_PRIORITY_SHIFT) |
+          ((uint32_t)(lr_reg->state & GICH_V2_LR_STATE_MASK)
+                                   << GICH_V2_LR_STATE_SHIFT) |
+          ((uint32_t)(lr_reg->hw_status & GICH_V2_LR_HW_MASK)
+                                       << GICH_V2_LR_HW_SHIFT)  |
+          ((uint32_t)(lr_reg->grp & GICH_V2_LR_GRP_MASK) << GICH_V2_LR_GRP_SHIFT) );
+
+    writel_gich(lrv, GICH_LR + lr * 4);
+}
+
+static void gicv2_hcr_status(uint32_t flag, bool_t status)
+{
+    uint32_t hcr = readl_gich(GICH_HCR);
+
+    if ( status )
+        hcr |= flag;
+    else
+        hcr &= (~flag);
+
+    writel_gich(hcr, GICH_HCR);
+}
+
+static unsigned int gicv2_read_vmcr_priority(void)
+{
+   return ((readl_gich(GICH_VMCR) >> GICH_V2_VMCR_PRIORITY_SHIFT)
+           & GICH_V2_VMCR_PRIORITY_MASK);
+}
+
+static unsigned int gicv2_read_apr(int apr_reg)
+{
+   return readl_gich(GICH_APR);
+}
+
+static void gicv2_irq_enable(struct irq_desc *desc)
+{
+    unsigned long flags;
+    int irq = desc->irq;
+
+    ASSERT(spin_is_locked(&desc->lock));
+
+    spin_lock_irqsave(&gicv2.lock, flags);
+    clear_bit(_IRQ_DISABLED, &desc->status);
+    dsb(sy);
+    /* Enable routing */
+    writel_gicd((1u << (irq % 32)), GICD_ISENABLER + (irq / 32) * 4);
+    spin_unlock_irqrestore(&gicv2.lock, flags);
+}
+
+static void gicv2_irq_disable(struct irq_desc *desc)
+{
+    unsigned long flags;
+    int irq = desc->irq;
+
+    ASSERT(spin_is_locked(&desc->lock));
+
+    spin_lock_irqsave(&gicv2.lock, flags);
+    /* Disable routing */
+    writel_gicd(1u << (irq % 32), GICD_ICENABLER + (irq / 32) * 4);
+    set_bit(_IRQ_DISABLED, &desc->status);
+    spin_unlock_irqrestore(&gicv2.lock, flags);
+}
+
+static unsigned int gicv2_irq_startup(struct irq_desc *desc)
+{
+    gicv2_irq_enable(desc);
+
+    return 0;
+}
+
+static void gicv2_irq_shutdown(struct irq_desc *desc)
+{
+    gicv2_irq_disable(desc);
+}
+
+static void gicv2_irq_ack(struct irq_desc *desc)
+{
+    /* No ACK -- reading IAR has done this for us */
+}
+
+static void gicv2_host_irq_end(struct irq_desc *desc)
+{
+    /* Lower the priority */
+    gicv2_eoi_irq(desc);
+    /* Deactivate */
+    gicv2_dir_irq(desc);
+}
+
+static void gicv2_guest_irq_end(struct irq_desc *desc)
+{
+    /* Lower the priority of the IRQ */
+    gicv2_eoi_irq(desc);
+    /* Deactivation happens in maintenance interrupt / via GICV */
+}
+
+static void gicv2_irq_set_affinity(struct irq_desc *desc, const cpumask_t *cpu_mask)
+{
+    unsigned int mask;
+
+    ASSERT(!cpumask_empty(cpu_mask));
+
+    spin_lock(&gicv2.lock);
+
+    mask = gicv2_cpu_mask(cpu_mask);
+
+    /* Set target CPU mask (RAZ/WI on uniprocessor) */
+    writeb_gicd(mask, GICD_ITARGETSR + desc->irq);
+
+    spin_unlock(&gicv2.lock);
+}
+
+static int gicv2_make_dt_node(const struct domain *d,
+                              const struct dt_device_node *node, void *fdt)
+{
+    const struct dt_device_node *gic = dt_interrupt_controller;
+    const void *compatible = NULL;
+    u32 len;
+    const __be32 *regs;
+    int res = 0;
+
+    compatible = dt_get_property(gic, "compatible", &len);
+    if ( !compatible )
+    {
+        dprintk(XENLOG_ERR, "Can't find compatible property for the gic node\n");
+        return -FDT_ERR_XEN(ENOENT);
+    }
+
+    res = fdt_begin_node(fdt, "interrupt-controller");
+    if ( res )
+        return res;
+
+    res = fdt_property(fdt, "compatible", compatible, len);
+    if ( res )
+        return res;
+
+    res = fdt_property_cell(fdt, "#interrupt-cells", 3);
+    if ( res )
+        return res;
+
+    res = fdt_property(fdt, "interrupt-controller", NULL, 0);
+
+    if ( res )
+        return res;
+
+    /*
+     * DTB provides up to 4 regions to handle virtualization
+     * (in order GICD, GICC, GICH and GICV interfaces)
+     * however dom0 just needs GICD and GICC provided by Xen.
+     */
+    regs = dt_get_property(gic, "reg", &len);
+    if ( !regs )
+    {
+        dprintk(XENLOG_ERR, "Can't find reg property for the gic node\n");
+        return -FDT_ERR_XEN(ENOENT);
+    }
+
+    len = dt_cells_to_size(dt_n_addr_cells(node) + dt_n_size_cells(node));
+    len *= 2;
+
+    res = fdt_property(fdt, "reg", regs, len);
+
+    return res;
+}
+
+/* XXX different for level vs edge */
+static hw_irq_controller gicv2_host_irq_type = {
+    .typename     = "gic-v2",
+    .startup      = gicv2_irq_startup,
+    .shutdown     = gicv2_irq_shutdown,
+    .enable       = gicv2_irq_enable,
+    .disable      = gicv2_irq_disable,
+    .ack          = gicv2_irq_ack,
+    .end          = gicv2_host_irq_end,
+    .set_affinity = gicv2_irq_set_affinity,
+};
+
+static hw_irq_controller gicv2_guest_irq_type = {
+    .typename     = "gic-v2",
+    .startup      = gicv2_irq_startup,
+    .shutdown     = gicv2_irq_shutdown,
+    .enable       = gicv2_irq_enable,
+    .disable      = gicv2_irq_disable,
+    .ack          = gicv2_irq_ack,
+    .end          = gicv2_guest_irq_end,
+    .set_affinity = gicv2_irq_set_affinity,
+};
+
+const static struct gic_hw_operations gicv2_ops = {
+    .info                = &gicv2_info,
+    .secondary_init      = gicv2_secondary_cpu_init,
+    .save_state          = gicv2_save_state,
+    .restore_state       = gicv2_restore_state,
+    .dump_state          = gicv2_dump_state,
+    .gicv_setup          = gicv2v_setup,
+    .gic_host_irq_type   = &gicv2_host_irq_type,
+    .gic_guest_irq_type  = &gicv2_guest_irq_type,
+    .eoi_irq             = gicv2_eoi_irq,
+    .deactivate_irq      = gicv2_dir_irq,
+    .read_irq            = gicv2_read_irq,
+    .set_irq_properties  = gicv2_set_irq_properties,
+    .send_SGI            = gicv2_send_SGI,
+    .disable_interface   = gicv2_disable_interface,
+    .update_lr           = gicv2_update_lr,
+    .update_hcr_status   = gicv2_hcr_status,
+    .clear_lr            = gicv2_clear_lr,
+    .read_lr             = gicv2_read_lr,
+    .write_lr            = gicv2_write_lr,
+    .read_vmcr_priority  = gicv2_read_vmcr_priority,
+    .read_apr            = gicv2_read_apr,
+    .make_dt_node        = gicv2_make_dt_node,
+};
+
+/* Set up the GIC */
+static int __init gicv2_init(struct dt_device_node *node, const void *data)
+{
+    int res;
+
+    dt_device_set_used_by(node, DOMID_XEN);
+
+    res = dt_device_get_address(node, 0, &gicv2.dbase, NULL);
+    if ( res || !gicv2.dbase || (gicv2.dbase & ~PAGE_MASK) )
+        panic("GICv2: Cannot find a valid address for the distributor");
+
+    res = dt_device_get_address(node, 1, &gicv2.cbase, NULL);
+    if ( res || !gicv2.cbase || (gicv2.cbase & ~PAGE_MASK) )
+        panic("GICv2: Cannot find a valid address for the CPU");
+
+    res = dt_device_get_address(node, 2, &gicv2.hbase, NULL);
+    if ( res || !gicv2.hbase || (gicv2.hbase & ~PAGE_MASK) )
+        panic("GICv2: Cannot find a valid address for the hypervisor");
+
+    res = dt_device_get_address(node, 3, &gicv2.vbase, NULL);
+    if ( res || !gicv2.vbase || (gicv2.vbase & ~PAGE_MASK) )
+        panic("GICv2: Cannot find a valid address for the virtual CPU");
+
+    res = platform_get_irq(node, 0);
+    if ( res < 0 )
+        panic("GICv2: Cannot find the maintenance IRQ");
+    gicv2_info.maintenance_irq = res;
+
+    /* Set the GIC as the primary interrupt controller */
+    dt_interrupt_controller = node;
+
+    /* TODO: Add check on distributor, cpu size */
+
+    printk("GICv2 initialization:\n"
+              "        gic_dist_addr=%"PRIpaddr"\n"
+              "        gic_cpu_addr=%"PRIpaddr"\n"
+              "        gic_hyp_addr=%"PRIpaddr"\n"
+              "        gic_vcpu_addr=%"PRIpaddr"\n"
+              "        gic_maintenance_irq=%u\n",
+              gicv2.dbase, gicv2.cbase, gicv2.hbase, gicv2.vbase,
+              gicv2_info.maintenance_irq);
+
+    if ( (gicv2.dbase & ~PAGE_MASK) || (gicv2.cbase & ~PAGE_MASK) ||
+         (gicv2.hbase & ~PAGE_MASK) || (gicv2.vbase & ~PAGE_MASK) )
+        panic("GICv2 interfaces not page aligned");
+
+    gicv2.map_dbase = ioremap_nocache(gicv2.dbase, PAGE_SIZE);
+    if ( !gicv2.map_dbase )
+        panic("GICv2: Failed to ioremap for GIC distributor\n");
+
+    gicv2.map_cbase[0] = ioremap_nocache(gicv2.cbase, PAGE_SIZE);
+
+    if ( platform_has_quirk(PLATFORM_QUIRK_GIC_64K_STRIDE) )
+        gicv2.map_cbase[1] = ioremap_nocache(gicv2.cbase + PAGE_SIZE * 0x10,
+                                           PAGE_SIZE);
+    else
+        gicv2.map_cbase[1] = ioremap_nocache(gicv2.cbase + PAGE_SIZE, PAGE_SIZE);
+
+    if ( !gicv2.map_cbase[0] || !gicv2.map_cbase[1] )
+        panic("GICv2: Failed to ioremap for GIC CPU interface\n");
+
+    gicv2.map_hbase = ioremap_nocache(gicv2.hbase, PAGE_SIZE);
+    if ( !gicv2.map_hbase )
+        panic("GICv2: Failed to ioremap for GIC Virtual interface\n");
+
+    /* Global settings: interrupt distributor */
+    spin_lock_init(&gicv2.lock);
+    spin_lock(&gicv2.lock);
+
+    gicv2_dist_init();
+    gicv2_cpu_init();
+    gicv2_hyp_init();
+
+    spin_unlock(&gicv2.lock);
+
+    gicv2_info.hw_version = GIC_V2;
+    register_gic_ops(&gicv2_ops);
+
+    return 0;
+}
+
+static const struct dt_device_match gicv2_dt_match[] __initconst =
+{
+    DT_MATCH_GIC_V2,
+    { /* sentinel */ },
+};
+
+DT_DEVICE_START(gicv2, "GICv2", DEVICE_GIC)
+        .dt_match = gicv2_dt_match,
+        .init = gicv2_init,
+DT_DEVICE_END
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
Signature · 1 line
1.9.1
#2 lore raw

PATCH v8 2/4 xen/arm: Check for interrupt controller directly

In reply to Frediano Ziglio

This check allow to detect mail interrupt controller even if it does not match one of the standard ones.
This allow boards with non standard controllers to be handled correctly without having to manually edit the global list every time.

---
 xen/arch/arm/domain_build.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
xen/arch/arm/domain_build.c +1 -1
index 9f1f59f..83951a3 100644
@@ -1069,7 +1069,7 @@ static int handle_node(struct domain *d, struct kernel_info *kinfo,
 
     /* Replace these nodes with our own. Note that the original may be
      * used_by DOMID_XEN so this check comes first. */
-    if ( dt_match_node(gic_matches, node) )
+    if ( node == dt_interrupt_controller || dt_match_node(gic_matches, node) )
         return make_gic_node(d, kinfo->fdt, node);
     if ( dt_match_node(timer_matches, node) )
         return make_timer_node(d, kinfo->fdt, node);
Signature · 1 line
1.9.1
#3 lore raw

Re: [PATCH v8 2/4] xen/arm: Check for interrupt controller directly

Hello Frediano,

Quoted 1 line · Frediano Ziglio

This check allow to detect mail interrupt controller even if it does

main

Quoted 14 lines

not match one of the standard ones.
This allow boards with non standard controllers to be handled correctly without having to manually edit the global list every time.

---
 xen/arch/arm/domain_build.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
xen/arch/arm/domain_build.c +0 -0
index 9f1f59f..83951a3 100644

xen/arch/arm/domain_build.c static int handle_node(struct domain *d, struct kernel_info *kinfo, · line 1073

Quoted 6 lines
xen/arch/arm/domain_build.c +1 -1
@@ -1069,7 +1069,7 @@ static int handle_node(struct domain *d, struct kernel_info *kinfo,
 
     /* Replace these nodes with our own. Note that the original may be
      * used_by DOMID_XEN so this check comes first. */
-    if ( dt_match_node(gic_matches, node) )
+    if ( node == dt_interrupt_controller || dt_match_node(gic_matches, node) )
         return make_gic_node(d, kinfo->fdt, node);

What about if the device tree exposes multiple GICs? By mistake we will expose the secondaries GIC if they are not standard.

As I suggested on a previous mail, I would prefer to introduce a new callback to check if the node is a GIC.

Regards,

Signature · 1 line
Julien Grall
#4 lore raw

Re: [PATCH v8 2/4] xen/arm: Check for interrupt controller directly

2015-03-03 14:45 GMT+00:00 Julien Grall <[email protected]>:

Quoted 31 lines

Hello Frediano,

Quoted 1 line · Frediano Ziglio

This check allow to detect mail interrupt controller even if it does

main

Quoted 14 lines

not match one of the standard ones.
This allow boards with non standard controllers to be handled correctly without having to manually edit the global list every time.

---
 xen/arch/arm/domain_build.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
xen/arch/arm/domain_build.c +0 -0
index 9f1f59f..83951a3 100644

xen/arch/arm/domain_build.c static int handle_node(struct domain *d, struct kernel_info *kinfo, · line 1073

Quoted 6 lines
xen/arch/arm/domain_build.c +1 -1
@@ -1069,7 +1069,7 @@ static int handle_node(struct domain *d, struct kernel_info *kinfo,
 
     /* Replace these nodes with our own. Note that the original may be
      * used_by DOMID_XEN so this check comes first. */
-    if ( dt_match_node(gic_matches, node) )
+    if ( node == dt_interrupt_controller || dt_match_node(gic_matches, node) )
         return make_gic_node(d, kinfo->fdt, node);

What about if the device tree exposes multiple GICs? By mistake we will expose the secondaries GIC if they are not standard.

Quoted 3 lines

As I suggested on a previous mail, I would prefer to introduce a new callback to check if the node is a GIC.

I think something like this would make all happy (I hope, I tested and works correctly on my board):

xen/arch/arm/domain_build.c +0 -0
index 9f1f59f..aaa3b97 100644
@@ -1035,12 +1035,6 @@ static int handle_node(struct domain *d, struct

kernel_info *kinfo,

         DT_MATCH_COMPATIBLE("arm,armv7-timer-mem"),
         { /* sentinel */ },
     };
-    static const struct dt_device_match gic_matches[] __initconst =
-    {
-        DT_MATCH_GIC_V2,
-        DT_MATCH_GIC_V3,
-        { /* sentinel */ },
-    };
     static const struct dt_device_match timer_matches[] __initconst =
     {
         DT_MATCH_TIMER,

@@ -1069,7 +1063,7 @@ static int handle_node(struct domain *d, struct kernel_info *kinfo,

/* Replace these nodes with our own. Note that the original may be
* used_by DOMID_XEN so this check comes first. */
- if ( dt_match_node(gic_matches, node) )
+ if ( device_get_class(node) == DEVICE_GIC )

         return make_gic_node(d, kinfo->fdt, node);
     if ( dt_match_node(timer_matches, node) )
         return make_timer_node(d, kinfo->fdt, node);
Signature · 4 lines
1.9.1


Frediano
#5 lore raw

Re: [PATCH v8 2/4] xen/arm: Check for interrupt controller directly

Quoted 32 lines · Frediano Ziglio

2015-03-03 14:45 GMT+00:00 Julien Grall <[email protected]>:

Quoted 31 lines

Hello Frediano,

Quoted 1 line · Frediano Ziglio

This check allow to detect mail interrupt controller even if it does

main

Quoted 14 lines

not match one of the standard ones.
This allow boards with non standard controllers to be handled correctly without having to manually edit the global list every time.

---
 xen/arch/arm/domain_build.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
xen/arch/arm/domain_build.c +0 -0
index 9f1f59f..83951a3 100644

xen/arch/arm/domain_build.c static int handle_node(struct domain *d, struct kernel_info *kinfo, · line 1073

Quoted 6 lines
xen/arch/arm/domain_build.c +1 -1
@@ -1069,7 +1069,7 @@ static int handle_node(struct domain *d, struct kernel_info *kinfo,
 
     /* Replace these nodes with our own. Note that the original may be
      * used_by DOMID_XEN so this check comes first. */
-    if ( dt_match_node(gic_matches, node) )
+    if ( node == dt_interrupt_controller || dt_match_node(gic_matches, node) )
         return make_gic_node(d, kinfo->fdt, node);

What about if the device tree exposes multiple GICs? By mistake we will expose the secondaries GIC if they are not standard.

Quoted 6 lines
Quoted 3 lines

As I suggested on a previous mail, I would prefer to introduce a new callback to check if the node is a GIC.

I think something like this would make all happy (I hope, I tested and works correctly on my board):

This looks good to me.

Regards,

Quoted 29 lines
xen/arch/arm/domain_build.c +0 -6
index 9f1f59f..aaa3b97 100644
@@ -1035,12 +1035,6 @@ static int handle_node(struct domain *d, struct
 kernel_info *kinfo,
         DT_MATCH_COMPATIBLE("arm,armv7-timer-mem"),
         { /* sentinel */ },
     };
-    static const struct dt_device_match gic_matches[] __initconst =
-    {
-        DT_MATCH_GIC_V2,
-        DT_MATCH_GIC_V3,
-        { /* sentinel */ },
-    };
     static const struct dt_device_match timer_matches[] __initconst =
     {

DT_MATCH_TIMER,

xen/arch/arm/domain_build.c +1 -1
@@ -1069,7 +1063,7 @@ static int handle_node(struct domain *d, struct
 kernel_info *kinfo,
 
     /* Replace these nodes with our own. Note that the original may be
      * used_by DOMID_XEN so this check comes first. */
-    if ( dt_match_node(gic_matches, node) )
+    if ( device_get_class(node) == DEVICE_GIC )
         return make_gic_node(d, kinfo->fdt, node);
     if ( dt_match_node(timer_matches, node) )
         return make_timer_node(d, kinfo->fdt, node);
Signature · 1 line
Julien Grall
#6 lore raw

Re: [PATCH v8 2/4] xen/arm: Check for interrupt controller directly

In reply to Julien Grall
Quoted 22 lines · Julien Grall

Hello Frediano,

Quoted 1 line · Frediano Ziglio

This check allow to detect mail interrupt controller even if it does

main

Quoted 15 lines

not match one of the standard ones.
This allow boards with non standard controllers to be handled correctly without having to manually edit the global list every time.

---
 xen/arch/arm/domain_build.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
xen/arch/arm/domain_build.c +0 -0
index 9f1f59f..83951a3 100644
@@ -1069,7 +1069,7 @@ static int handle_node(struct domain *d, struct kernel_info *kinfo,
 
Quoted 8 lines

xen/arch/arm/domain_build.c static int handle_node(struct domain *d, struct kernel_info *kinfo, · line 1073

Quoted 5 lines
xen/arch/arm/domain_build.c +1 -1
     /* Replace these nodes with our own. Note that the original may be
      * used_by DOMID_XEN so this check comes first. */
-    if ( dt_match_node(gic_matches, node) )
+    if ( node == dt_interrupt_controller || dt_match_node(gic_matches, node) )
         return make_gic_node(d, kinfo->fdt, node);

What about if the device tree exposes multiple GICs? By mistake we will expose the secondaries GIC if they are not standard.

Does the existing code here not insert a primary gic node into the dom0 tree for every gic node which find, that doesn't sound like it can be right!

Is the right pattern:

    if ( node == dt_interrupt_controller )
         return make_gic_node(d, kinfo->fdt, node);
    else if ( device_get_class(node) == DEVICE_GIC )
    {
         DPRINT(" Secondary GIC, skip it\n");
         return 0;/* Skip it */
    }

(incorporating the suggestion to match class from further down thread)?

Anyway, I don't think what Frediano proposes in v9 of this series makes any of this worse, so I don't propose to block the series based on it.

Quoted 6 lines

As I suggested on a previous mail, I would prefer to introduce a new callback to check if the node is a GIC.

Regards,

#7 lore raw

Re: [PATCH v8 2/4] xen/arm: Check for interrupt controller directly

Quoted 32 lines · Ian Campbell
Quoted 22 lines · Julien Grall

Hello Frediano,

Quoted 1 line · Frediano Ziglio

This check allow to detect mail interrupt controller even if it does

main

Quoted 15 lines

not match one of the standard ones.
This allow boards with non standard controllers to be handled correctly without having to manually edit the global list every time.

---
  xen/arch/arm/domain_build.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
xen/arch/arm/domain_build.c +0 -0
index 9f1f59f..83951a3 100644
@@ -1069,7 +1069,7 @@ static int handle_node(struct domain *d, struct kernel_info *kinfo,
 
Quoted 8 lines

xen/arch/arm/domain_build.c static int handle_node(struct domain *d, struct kernel_info *kinfo, · line 1073

Quoted 5 lines
xen/arch/arm/domain_build.c +1 -1
      /* Replace these nodes with our own. Note that the original may be
       * used_by DOMID_XEN so this check comes first. */
-    if ( dt_match_node(gic_matches, node) )
+    if ( node == dt_interrupt_controller || dt_match_node(gic_matches, node) )
          return make_gic_node(d, kinfo->fdt, node);

What about if the device tree exposes multiple GICs? By mistake we will expose the secondaries GIC if they are not standard.

Quoted 3 lines

Does the existing code here not insert a primary gic node into the dom0 tree for every gic node which find, that doesn't sound like it can be right!

The current code doesn't insert any secondary gic (see the check in make_gic_node) in the DT.

With this version of the patch secondary gics was added to the DOM0 DT

Quoted 8 lines

Is the right pattern:

     if ( node == dt_interrupt_controller )
          return make_gic_node(d, kinfo->fdt, node);
     else if ( device_get_class(node) == DEVICE_GIC )
     {
          DPRINT(" Secondary GIC, skip it\n");
          return 0;/* Skip it */
     }
Quoted 4 lines

(incorporating the suggestion to match class from further down thread)?

Anyway, I don't think what Frediano proposes in v9 of this series makes any of this worse, so I don't propose to block the series based on it.

The solution on the v9 was the right one.

I though I sent an email to review it but it looks like not :/

Regards,

Signature · 1 line
Julien Grall
#8 lore raw

Re: [PATCH v8 2/4] xen/arm: Check for interrupt controller directly

Quoted 34 lines · Julien Grall
Quoted 32 lines · Ian Campbell
Quoted 30 lines · Julien Grall

Hello Frediano,

Quoted 1 line · Frediano Ziglio

This check allow to detect mail interrupt controller even if it does

main

Quoted 14 lines

not match one of the standard ones.
This allow boards with non standard controllers to be handled correctly without having to manually edit the global list every time.

---
  xen/arch/arm/domain_build.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
xen/arch/arm/domain_build.c +0 -0
index 9f1f59f..83951a3 100644

xen/arch/arm/domain_build.c static int handle_node(struct domain *d, struct kernel_info *kinfo, · line 1073

Quoted 6 lines
xen/arch/arm/domain_build.c +1 -1
@@ -1069,7 +1069,7 @@ static int handle_node(struct domain *d, struct kernel_info *kinfo,
 
      /* Replace these nodes with our own. Note that the original may be
       * used_by DOMID_XEN so this check comes first. */
-    if ( dt_match_node(gic_matches, node) )
+    if ( node == dt_interrupt_controller || dt_match_node(gic_matches, node) )
          return make_gic_node(d, kinfo->fdt, node);

What about if the device tree exposes multiple GICs? By mistake we will expose the secondaries GIC if they are not standard.

Quoted 6 lines
Quoted 3 lines

Does the existing code here not insert a primary gic node into the dom0 tree for every gic node which find, that doesn't sound like it can be right!

The current code doesn't insert any secondary gic (see the check in make_gic_node) in the DT.

Ah, I missed that, yes that would avoid the issue for sure.

Quoted 2 lines

With this version of the patch secondary gics was added to the DOM0 DT

How? Does that same check in make_gic_node not prevent it?

Quoted 10 lines
Quoted 10 lines

Is the right pattern:

     if ( node == dt_interrupt_controller )
          return make_gic_node(d, kinfo->fdt, node);
     else if ( device_get_class(node) == DEVICE_GIC )
     {
          DPRINT(" Secondary GIC, skip it\n");
          return 0;/* Skip it */
     }

(incorporating the suggestion to match class from further down thread)?

Quoted 4 lines
Quoted 2 lines

Anyway, I don't think what Frediano proposes in v9 of this series makes any of this worse, so I don't propose to block the series based on it.

The solution on the v9 was the right one.

Good.

Quoted 1 line

I though I sent an email to review it but it looks like not :/

I don't recall seeing it.

Ian.

#9 lore raw

Re: [PATCH v8 2/4] xen/arm: Check for interrupt controller directly

Quoted 43 lines

From: Ian Campbell [mailto:[email protected]]
Sent: Monday, March 09, 2015 4:09 PM

Quoted 6 lines · Julien Grall
Quoted 4 lines · Ian Campbell
Quoted 3 lines · Julien Grall

Hello Frediano,

On 03/03/15 11:19, Frediano Ziglio wrote:

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 2 lines

This check allow to detect mail interrupt controller even if it does

main

Quoted 3 lines

not match one of the standard ones.
This allow boards with non standard controllers to be handled correctly without having to manually edit the global list every

time.

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
---
  xen/arch/arm/domain_build.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

xen/arch/arm/domain_build.c static int handle_node(struct domain *d, · line 1071

Quoted 8 lines
(quoted diff) +0 -0

b/xen/arch/arm/domain_build.c index 9f1f59f..83951a3 100644

xen/arch/arm/domain_build.c +0 -0
@@ -1069,7 +1069,7 @@ static int handle_node(struct domain *d,
 struct kernel_info *kinfo,
 
      /* Replace these nodes with our own. Note that the original

may be

Quoted 9 lines
Quoted 9 lines
Quoted 8 lines

xen/arch/arm/domain_build.c static int handle_node(struct domain *d, struct kernel_info *kinfo, · line 1073

Quoted 5 lines
xen/arch/arm/domain_build.c +2 -1
       * used_by DOMID_XEN so this check comes first. */
-    if ( dt_match_node(gic_matches, node) )
+    if ( node == dt_interrupt_controller ||
+ dt_match_node(gic_matches, node) )
          return make_gic_node(d, kinfo->fdt, node);

What about if the device tree exposes multiple GICs? By mistake we will expose the secondaries GIC if they are not standard.

Quoted 9 lines
Quoted 6 lines
Quoted 3 lines

Does the existing code here not insert a primary gic node into the dom0 tree for every gic node which find, that doesn't sound like it can be right!

The current code doesn't insert any secondary gic (see the check in make_gic_node) in the DT.

Ah, I missed that, yes that would avoid the issue for sure.

I'm wondering if the final results can always work. I mean, a bare metal kernel will see all interrupt controllers while under Xen kernel receive only the primary one (virtualized). Now the question is "What are topology of secondary controllers?" I mean if a device is supposed so send some interrupt throw a secondary controller and nor kernel nor xen handle this device we lose the ability to use interrupts from this device?

Quoted 20 lines
Quoted 1 line

With this version of the patch secondary gics was added to the DOM0

DT

How? Does that same check in make_gic_node not prevent it?

Quoted 9 lines
Quoted 9 lines

Is the right pattern:

     if ( node == dt_interrupt_controller )
          return make_gic_node(d, kinfo->fdt, node);
     else if ( device_get_class(node) == DEVICE_GIC )
     {
          DPRINT(" Secondary GIC, skip it\n");
          return 0;/* Skip it */
     }

(incorporating the suggestion to match class from further down

thread)?

Quoted 3 lines
Quoted 3 lines

Anyway, I don't think what Frediano proposes in v9 of this series makes any of this worse, so I don't propose to block the series

based on it.

Quoted 1 line
Quoted 8 lines
Quoted 1 line

The solution on the v9 was the right one.

Good.

Quoted 1 line

I though I sent an email to review it but it looks like not :/

I don't recall seeing it.

I remember something about. What this perhaps (http://lists.xenproject.org/archives/html/xen-devel/2015-03/msg00396.html) ?

Frediano

#10 lore raw

Re: [PATCH v8 2/4] xen/arm: Check for interrupt controller directly

Quoted 53 lines · Frediano Ziglio
Quoted 43 lines

From: Ian Campbell [mailto:[email protected]]
Sent: Monday, March 09, 2015 4:09 PM

Quoted 6 lines · Julien Grall
Quoted 4 lines · Ian Campbell
Quoted 3 lines · Julien Grall

Hello Frediano,

On 03/03/15 11:19, Frediano Ziglio wrote:

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 2 lines

This check allow to detect mail interrupt controller even if it does

main

Quoted 3 lines

not match one of the standard ones.
This allow boards with non standard controllers to be handled correctly without having to manually edit the global list every

time.

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
---
  xen/arch/arm/domain_build.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

xen/arch/arm/domain_build.c static int handle_node(struct domain *d, · line 1071

Quoted 8 lines
(quoted diff) +0 -0

b/xen/arch/arm/domain_build.c index 9f1f59f..83951a3 100644

xen/arch/arm/domain_build.c +0 -0
@@ -1069,7 +1069,7 @@ static int handle_node(struct domain *d,
 struct kernel_info *kinfo,
 
      /* Replace these nodes with our own. Note that the original

may be

Quoted 9 lines
Quoted 9 lines
Quoted 8 lines

xen/arch/arm/domain_build.c static int handle_node(struct domain *d, struct kernel_info *kinfo, · line 1073

Quoted 5 lines
xen/arch/arm/domain_build.c +2 -1
       * used_by DOMID_XEN so this check comes first. */
-    if ( dt_match_node(gic_matches, node) )
+    if ( node == dt_interrupt_controller ||
+ dt_match_node(gic_matches, node) )
          return make_gic_node(d, kinfo->fdt, node);

What about if the device tree exposes multiple GICs? By mistake we will expose the secondaries GIC if they are not standard.

Quoted 9 lines
Quoted 6 lines
Quoted 3 lines

Does the existing code here not insert a primary gic node into the dom0 tree for every gic node which find, that doesn't sound like it can be right!

The current code doesn't insert any secondary gic (see the check in make_gic_node) in the DT.

Ah, I missed that, yes that would avoid the issue for sure.

Quoted 7 lines

I'm wondering if the final results can always work. I mean, a bare metal kernel will see all interrupt controllers while under Xen kernel receive only the primary one (virtualized). Now the question is "What are topology of secondary controllers?" I mean if a device is supposed so send some interrupt throw a secondary controller and nor kernel nor xen handle this device we lose the ability to use interrupts from this device?

I've never yet seen a GICv2+ system which had multiple interrupt controllers. Do you know of one?

My gut feeling is that the need to chain GICs was a feature of the GICv1 which isn't virt capable so we don't care much about it.

Ian.

#11 lore raw

PATCH v8 3/4 xen/arm: Make gic-v2 code handle hip04-d01 platform

In reply to Frediano Ziglio

The GIC in this platform is mainly compatible with the standard GICv2 beside:
- ITARGET is extended to 16 bit to support 16 CPUs;
- SGI mask is extended to support 16 CPUs;
- maximum supported interrupt is 510;
- GICH APR and LR register offsets.

---
 MAINTAINERS              |   5 +
 xen/arch/arm/Makefile    |   1 +
 xen/arch/arm/gic-hip04.c | 396 ++++++++++++++++++++++++-----------------------
 3 files changed, 209 insertions(+), 193 deletions(-)
MAINTAINERS +5 -0
index 0f04742..b17aab1 100644
@@ -138,6 +138,11 @@ F:	xen/drivers/char/omap-uart.c
 F:	xen/drivers/char/pl011.c
 F:	xen/drivers/passthrough/arm/
 
+HISILICON HIP04 SUPPORT
+M:	Frediano Ziglio <[email protected]>
+S:	Supported
+F:	xen/arch/arm/git-hip04.c
+
 CPU POOLS
 M:	Juergen Gross <[email protected]>
 S:	Supported
xen/arch/arm/Makefile +1 -0
index 41aba2e..935999e 100644
@@ -12,6 +12,7 @@ obj-y += domctl.o
 obj-y += sysctl.o
 obj-y += domain_build.o
 obj-y += gic.o gic-v2.o
+obj-$(CONFIG_ARM_32) += gic-hip04.o
 obj-$(CONFIG_ARM_64) += gic-v3.o
 obj-y += io.o
 obj-y += irq.o
xen/arch/arm/gic-hip04.c +203 -193

795 lines not on this page · raw message

Signature · 1 line
1.9.1
#12 lore raw

Re: [PATCH v8 3/4] xen/arm: Make gic-v2 code handle hip04-d01 platform

Hello Frediano,

Quoted 5 lines · Frediano Ziglio

The GIC in this platform is mainly compatible with the standard GICv2 beside:
- ITARGET is extended to 16 bit to support 16 CPUs;
- SGI mask is extended to support 16 CPUs;
- maximum supported interrupt is 510;

510 is not a multiple of 32. Is it normal?

This will result to having nr_lines = 512. What happen is we are trying to access IRQ 510 and 511?

Also, is it possible to have GICH.VirtualID >= 510?

Quoted 15 lines

- GICH APR and LR register offsets.

---
 MAINTAINERS              |   5 +
 xen/arch/arm/Makefile    |   1 +
 xen/arch/arm/gic-hip04.c | 396 ++++++++++++++++++++++++-----------------------
 3 files changed, 209 insertions(+), 193 deletions(-)
MAINTAINERS +0 -0
index 0f04742..b17aab1 100644

MAINTAINERS F: xen/drivers/char/omap-uart.c · line 142

Quoted 5 lines
MAINTAINERS +2 -0
@@ -138,6 +138,11 @@ F:	xen/drivers/char/omap-uart.c
 F:	xen/drivers/char/pl011.c
 F:	xen/drivers/passthrough/arm/
 
+HISILICON HIP04 SUPPORT
+M:	Frediano Ziglio <[email protected]>

It might be good to have 2 maintainers form Huawei on this file. Ian any though?

MAINTAINERS F: xen/drivers/char/omap-uart.c · line 144

Quoted 2 lines
MAINTAINERS +2 -0
+S:	Supported
+F:	xen/arch/arm/git-hip04.c

gic-hip04.c

Quoted 21 lines
MAINTAINERS +1 -0
+
 CPU POOLS
 M:	Juergen Gross <[email protected]>
 S:	Supported
xen/arch/arm/Makefile +1 -0
index 41aba2e..935999e 100644
@@ -12,6 +12,7 @@ obj-y += domctl.o
 obj-y += sysctl.o
 obj-y += domain_build.o
 obj-y += gic.o gic-v2.o
+obj-$(CONFIG_ARM_32) += gic-hip04.o
 obj-$(CONFIG_ARM_64) += gic-v3.o
 obj-y += io.o
 obj-y += irq.o
xen/arch/arm/gic-hip04.c +0 -0
index 20cdbc9..94abdc4 100644

xen/arch/arm/gic-hip04.c line 5

Quoted 7 lines
xen/arch/arm/gic-hip04.c +3 -2
@@ -1,7 +1,8 @@
 /*
- * xen/arch/arm/gic-v2.c
+ * xen/arch/arm/gic-hip04.c
  *
- * ARM Generic Interrupt Controller support v2
+ * Generic Interrupt Controller for HiSilicon Hip04 platform
+ * Based heavily from gic-v2.c

Please add a commit ID. It would help you to keep track of the GIC.

xen/arch/arm/gic-hip04.c static struct { · line 77

Quoted 12 lines
xen/arch/arm/gic-hip04.c +2 -2
  *
  * Tim Deegan <[email protected]>
  * Copyright (c) 2011 Citrix Systems.
@@ -71,59 +72,69 @@ static struct {
     void __iomem * map_hbase; /* IO Address of virtual interface registers */
     paddr_t vbase;            /* Address of virtual cpu interface registers */
     spinlock_t lock;
-} gicv2;
+} hip04gic;
 
-static struct gic_info gicv2_info;
+static struct gic_info hip04gic_info;

I think the renaming of gicv2 and gicv2_info is pointless here. Instead of function name, it doesn't help for debugging.

It would also reduce the diff of this patch.

[..]

xen/arch/arm/gic-hip04.c static int gicv2_make_dt_node(const struct domain *d, · line 802

Quoted 7 lines
xen/arch/arm/gic-hip04.c +3 -3
-DT_DEVICE_START(gicv2, "GICv2", DEVICE_GIC)
-        .dt_match = gicv2_dt_match,
-        .init = gicv2_init,
+DT_DEVICE_START(hip04gic, "GIC-HIP04", DEVICE_GIC)
+    .dt_match = hip04gic_dt_match,
+    .init = hip04gic_init,
 DT_DEVICE_END

Please keep the same indentation as before.

Regards,

Signature · 1 line
Julien Grall
#13 lore raw

Re: [PATCH v8 3/4] xen/arm: Make gic-v2 code handle hip04-d01 platform

Quoted 10 lines

Hello Frediano,

Quoted 5 lines · Frediano Ziglio

The GIC in this platform is mainly compatible with the standard GICv2 beside:
- ITARGET is extended to 16 bit to support 16 CPUs;
- SGI mask is extended to support 16 CPUs;
- maximum supported interrupt is 510;

Quoted 5 lines

510 is not a multiple of 32. Is it normal?

This will result to having nr_lines = 512. What happen is we are trying to access IRQ 510 and 511?

I don't know. I think it's the same reason why in xen/arch/arm/gic.c the limit for irq is 1021 and not 1024 (see "if ( likely(irq >= 16 && irq < 1021) )" line)

Quoted 2 lines

Also, is it possible to have GICH.VirtualID >= 510?

I think so, GICH have the same interface of normal GICv2.

...

Quoted 8 lines
Quoted 8 lines
MAINTAINERS +0 -0
@@ -138,6 +138,11 @@ F:	xen/drivers/char/omap-uart.c
 F:	xen/drivers/char/pl011.c
 F:	xen/drivers/passthrough/arm/
 
Quoted 6 lines

MAINTAINERS F: xen/drivers/char/omap-uart.c · line 142

Quoted 2 lines
MAINTAINERS +2 -0
+HISILICON HIP04 SUPPORT
+M:	Frediano Ziglio <[email protected]>

It might be good to have 2 maintainers form Huawei on this file. Ian any though?

Added Zoltan Kiss.

Quoted 5 lines

MAINTAINERS F: xen/drivers/char/omap-uart.c · line 144

Quoted 2 lines
MAINTAINERS +2 -0
+S:	Supported
+F:	xen/arch/arm/git-hip04.c

gic-hip04.c

Too many git commands :)

...

Quoted 26 lines

xen/arch/arm/gic-hip04.c line 5

Quoted 11 lines

20cdbc9..94abdc4 100644

xen/arch/arm/gic-hip04.c +3 -2
@@ -1,7 +1,8 @@
 /*
- * xen/arch/arm/gic-v2.c
+ * xen/arch/arm/gic-hip04.c
  *
- * ARM Generic Interrupt Controller support v2
+ * Generic Interrupt Controller for HiSilicon Hip04 platform
+ * Based heavily from gic-v2.c

Please add a commit ID. It would help you to keep track of the GIC.

xen/arch/arm/gic-hip04.c static struct { · line 72

Quoted 5 lines
xen/arch/arm/gic-hip04.c +0 -0
  *
  * Tim Deegan <[email protected]>
  * Copyright (c) 2011 Citrix Systems.
@@ -71,59 +72,69 @@ static struct {
     void __iomem * map_hbase; /* IO Address of virtual interface

registers */

xen/arch/arm/gic-hip04.c static struct { · line 73

Quoted 1 line
xen/arch/arm/gic-hip04.c +0 -0
     paddr_t vbase;            /* Address of virtual cpu interface

registers */

Quoted 4 lines
xen/arch/arm/gic-hip04.c +1 -1
     spinlock_t lock;
-} gicv2;
+} hip04gic;
 
Quoted 8 lines

xen/arch/arm/gic-hip04.c static struct { · line 77

Quoted 2 lines
xen/arch/arm/gic-hip04.c +1 -1
-static struct gic_info gicv2_info;
+static struct gic_info hip04gic_info;

I think the renaming of gicv2 and gicv2_info is pointless here. Instead of function name, it doesn't help for debugging.

It would also reduce the diff of this patch.

No problem

Quoted 12 lines

[..]

xen/arch/arm/gic-hip04.c static int gicv2_make_dt_node(const struct domain *d, · line 802

Quoted 7 lines
xen/arch/arm/gic-hip04.c +3 -3
-DT_DEVICE_START(gicv2, "GICv2", DEVICE_GIC)
-        .dt_match = gicv2_dt_match,
-        .init = gicv2_init,
+DT_DEVICE_START(hip04gic, "GIC-HIP04", DEVICE_GIC)
+    .dt_match = hip04gic_dt_match,
+    .init = hip04gic_init,
 DT_DEVICE_END

Please keep the same indentation as before.

I was wondering why the indentation is different. Ok

Frediano

#14 lore raw

Re: [PATCH v8 3/4] xen/arm: Make gic-v2 code handle hip04-d01 platform

Quoted 10 lines · Frediano Ziglio
Quoted 10 lines

Hello Frediano,

Quoted 5 lines · Frediano Ziglio

The GIC in this platform is mainly compatible with the standard GICv2 beside:
- ITARGET is extended to 16 bit to support 16 CPUs;
- SGI mask is extended to support 16 CPUs;
- maximum supported interrupt is 510;

Quoted 7 lines
Quoted 5 lines

510 is not a multiple of 32. Is it normal?

This will result to having nr_lines = 512. What happen is we are trying to access IRQ 510 and 511?

I don't know. I think it's the same reason why in xen/arch/arm/gic.c the limit for irq is 1021 and not 1024 (see "if ( likely(irq >= 16 && irq < 1021) )" line)

IRQ 1021-1023 are reserved by the GIC as spurious interrupt.

If I understand correctly what you say, IRQ 510-511 may be considered for spurious interrupt?

If so, the check (irq >= 16 && irq < 1021) needs to be changed.

Quoted 4 lines
Quoted 2 lines

Also, is it possible to have GICH.VirtualID >= 510?

I think so, GICH have the same interface of normal GICv2.

But some offsets are different... so I'd like a confirmation based on some spec.

For instance on GICv2 if we use some VirtualID (1021-1023) the behavior is unpredictable.

So if you have the a similar things on your board we may need to restrict the number of VirtualID in order to avoid introduce a possible host denial from a guest.

Quoted 13 lines
Quoted 12 lines

[..]

xen/arch/arm/gic-hip04.c static int gicv2_make_dt_node(const struct domain *d, · line 802

Quoted 7 lines
xen/arch/arm/gic-hip04.c +3 -3
-DT_DEVICE_START(gicv2, "GICv2", DEVICE_GIC)
-        .dt_match = gicv2_dt_match,
-        .init = gicv2_init,
+DT_DEVICE_START(hip04gic, "GIC-HIP04", DEVICE_GIC)
+    .dt_match = hip04gic_dt_match,
+    .init = hip04gic_init,
 DT_DEVICE_END

Please keep the same indentation as before.

Quoted 1 line

I was wondering why the indentation is different. Ok

I'm not sure why ... but it looks like we use the same indentation everywhere for DT_DEVICE_START.

Regards,

Signature · 1 line
Julien Grall
#15 lore raw

Re: [PATCH v8 3/4] xen/arm: Make gic-v2 code handle hip04-d01 platform

2015-03-03 15:42 GMT+00:00 Julien Grall <[email protected]>:

Quoted 26 lines · Frediano Ziglio
Quoted 10 lines
Quoted 10 lines

Hello Frediano,

Quoted 5 lines · Frediano Ziglio

The GIC in this platform is mainly compatible with the standard GICv2 beside:
- ITARGET is extended to 16 bit to support 16 CPUs;
- SGI mask is extended to support 16 CPUs;
- maximum supported interrupt is 510;

Quoted 7 lines
Quoted 5 lines

510 is not a multiple of 32. Is it normal?

This will result to having nr_lines = 512. What happen is we are trying to access IRQ 510 and 511?

I don't know. I think it's the same reason why in xen/arch/arm/gic.c the limit for irq is 1021 and not 1024 (see "if ( likely(irq >= 16 && irq < 1021) )" line)

IRQ 1021-1023 are reserved by the GIC as spurious interrupt.

If I understand correctly what you say, IRQ 510-511 may be considered for spurious interrupt?

If so, the check (irq >= 16 && irq < 1021) needs to be changed.

Quoted 8 lines
Quoted 4 lines
Quoted 2 lines

Also, is it possible to have GICH.VirtualID >= 510?

I think so, GICH have the same interface of normal GICv2.

But some offsets are different... so I'd like a confirmation based on some spec.

You can find spec at https://github.com/hisilicon/boards/tree/master/D01/docs.

Yes, VirtualID >= 510 can be used.

Quoted 3 lines

For instance on GICv2 if we use some VirtualID (1021-1023) the behavior is unpredictable.

Same for our GIC.

Quoted 4 lines

So if you have the a similar things on your board we may need to restrict the number of VirtualID in order to avoid introduce a possible host denial from a guest.

Frediano

#16 lore raw

Re: [PATCH v8 3/4] xen/arm: Make gic-v2 code handle hip04-d01 platform

Hello,

Quoted 5 lines · Frediano Ziglio
Quoted 3 lines

But some offsets are different... so I'd like a confirmation based on some spec.

You can find spec at https://github.com/hisilicon/boards/tree/master/D01/docs.

The spec is in Chinese... Any chance to have an English version?

Regards,

Signature · 1 line
Julien Grall
#17 lore raw

PATCH v8 4/4 xen/arm: Force dom0 to use normal GICv2 driver on Hip04 platform

In reply to Frediano Ziglio

Until vGIC support is not implemented and tested, this will prevent guest kernels to use their Hip04 driver, or crash when they don't have any.

---
 xen/arch/arm/gic-hip04.c  | 18 +++++++++++-------
 xen/include/asm-arm/gic.h |  4 +++-
 2 files changed, 14 insertions(+), 8 deletions(-)
xen/arch/arm/gic-hip04.c +11 -7
index 94abdc4..9388350 100644
@@ -612,17 +612,21 @@ static int hip04gic_make_dt_node(const struct domain *d,
                               const struct dt_device_node *node, void *fdt)
 {
     const struct dt_device_node *gic = dt_interrupt_controller;
-    const void *compatible = NULL;
+    const void *compatible;
     u32 len;
     const __be32 *regs;
     int res = 0;
 
-    compatible = dt_get_property(gic, "compatible", &len);
-    if ( !compatible )
-    {
-        dprintk(XENLOG_ERR, "Can't find compatible property for the gic node\n");
-        return -FDT_ERR_XEN(ENOENT);
-    }
+    /*
+     * Replace compatibility string with a standard one.
+     * dom0 will see a compatible GIC. This as GICC is compatible
+     * with standard one and GICD (emulated by Xen) is compatible
+     * to standard. Otherwise we should implement HIP04 GICD in
+     * the virtual GIC.
+     * This actually limit CPU number to 8 for dom0.
+     */
+    compatible = DT_COMPAT_GIC_CORTEX_A15;
+    len = strlen((char*) compatible) + 1;
 
     res = fdt_begin_node(fdt, "interrupt-controller");
     if ( res )
xen/include/asm-arm/gic.h +3 -1
index 6f5767f..89a9b6f 100644
@@ -153,8 +153,10 @@
 #include <xen/irq.h>
 #include <asm-arm/vgic.h>
 
+#define DT_COMPAT_GIC_CORTEX_A15 "arm,cortex-a15-gic"
+
 #define DT_MATCH_GIC_V2                                             \
-    DT_MATCH_COMPATIBLE("arm,cortex-a15-gic"),                      \
+    DT_MATCH_COMPATIBLE(DT_COMPAT_GIC_CORTEX_A15),                  \
     DT_MATCH_COMPATIBLE("arm,cortex-a7-gic"),                       \
     DT_MATCH_COMPATIBLE("arm,gic-400")
 
Signature · 1 line
1.9.1