at86rf230: init xtal_trim with zero
Subsystems (2)
Alexander Aring
maintainerPATCH 1/1 at86rf230: init xtal_trim with zero
This patch initialize xtal_trim value to zero. The xtal_trim property is an optional device tree value. Currently if no xtal_trim property is given the xtal_trim value can be contain random data, because it's a stack variable. This patch init the xtal_trim value to zero which is also the default value after reset for at86rf230 transceivers.
--- drivers/net/ieee802154/at86rf230.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ieee802154/at86rf230.c +1 -1
@@ -1572,7 +1572,7 @@ static int at86rf230_probe(struct spi_device *spi)struct at86rf230_local *lp;unsigned int status;int rc, irq_type, rstn, slp_tr; -u8 xtal_trim; +u8 xtal_trim =0 ;if (!spi->irq) {dev_err (&spi->dev,"no IRQ specified\n" );
Signature · 1 line
2.3.0
Hi Alex,
Quoted 10 lines
This patch initialize
xtal_trimvalue to zero. Thextal_trimproperty is an optional device tree value. Currently if noxtal_trimproperty is given thextal_trimvalue can be contain random data, because it's a stack variable. This patch init thextal_trimvalue to zero which is also the default value after reset for at86rf230 transceivers.Signed-off-by Alexander Aring <[email protected]>---
drivers/net/ieee802154/at86rf230.c| 2 +-1 file changed, 1 insertion(+), 1 deletion(-)
patch has been applied to bluetooth-next tree.
Regards
Marcel