preserving file owners in do_package
Hi to all,
in my recipe I want to change owner and permission of a file, so I wrote:
do_install() {
ls -la ${D}/opt/user
chown -R user ${D}/opt/user
chgrp -R user ${D}/opt/user
ls -la ${D}/opt/user
chmod 754 ${D}/opt/user/user.sh
ls -la ${D}/opt/user
}the output of ls commands is:
drwxr-xr-x 8 root root 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
-rw-r--r-- 1 *root root* 55753 Aug 2 08:48 user.sh
drwxr-xr-x 8 user user 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
-rw-r--r-- 1 *user user* 55753 Aug 2 08:48 user.sh
drwxr-xr-x 8 user user 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
*-rwxr-xr--* 1 user user 55753 Aug 2 08:48 user.sh
So the change of owner and permission works fine in do_install phase.
Opening the final rootfs tarball, however, the file user.sh has still 754 permission but root as owner...so do_package doesn't preserve owner change done in do_install? Or maybe I'm doing something wrong in changing file owner? Any ideas? Thanks to all!
Hi Davide,
Quoted 25 lines · On Tuesday 15 October 2013 12:02:20 Davide Soldan wrote:
in my recipe I want to change owner and permission of a file, so I wrote:
do_install() { ls -la ${D}/opt/user chown -R user ${D}/opt/user chgrp -R user ${D}/opt/user ls -la ${D}/opt/user chmod 754 ${D}/opt/user/user.sh ls -la ${D}/opt/user }the output of ls commands is:
drwxr-xr-x 8 root root 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
-rw-r--r-- 1 *root root* 55753 Aug 2 08:48user.shdrwxr-xr-x 8 user user 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
-rw-r--r-- 1 *user user* 55753 Aug 2 08:48user.shdrwxr-xr-x 8 user user 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
*-rwxr-xr--* 1 user user 55753 Aug 2 08:48user.sh
Quoted 5 lines
So the change of owner and permission works fine in
do_installphase. Opening the final rootfs tarball, however, the fileuser.shhas still 754 permission but root as owner...sodo_packagedoesn't preserve owner change done indo_install? Or maybe I'm doing something wrong in changing file owner? Any ideas? Thanks to all!
Does your recipe create the specified user via useradd.bbclass?
Cheers,
Paul
Signature · 2 lines
Paul Eggleton Intel Open Source Technology Centre
In data martedì 15 ottobre 2013 11:38:21, Paul Eggleton ha scritto:
Quoted 36 lines
Hi Davide,
Quoted 25 lines · On Tuesday 15 October 2013 12:02:20 Davide Soldan wrote:
in my recipe I want to change owner and permission of a file, so I wrote:
do_install() { ls -la ${D}/opt/user chown -R user ${D}/opt/user chgrp -R user ${D}/opt/user ls -la ${D}/opt/user chmod 754 ${D}/opt/user/user.sh ls -la ${D}/opt/user }the output of ls commands is:
drwxr-xr-x 8 root root 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
-rw-r--r-- 1 *root root* 55753 Aug 2 08:48user.shdrwxr-xr-x 8 user user 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
-rw-r--r-- 1 *user user* 55753 Aug 2 08:48user.shdrwxr-xr-x 8 user user 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
*-rwxr-xr--* 1 user user 55753 Aug 2 08:48user.shQuoted 5 lines
So the change of owner and permission works fine in
do_installphase. Opening the final rootfs tarball, however, the fileuser.shhas still 754 permission but root as owner...sodo_packagedoesn't preserve owner change done indo_install? Or maybe I'm doing something wrong in changing file owner? Any ideas? Thanks to all!Does your recipe create the specified user via useradd.bbclass?
Quoted 4 lines
Cheers,
Paul
Hi Paul,
I've got a useradd recipe (myuseradd.bbclass) that create that specific user. Also in my recipe I've got the
DEPENDS = "myuseradd"
to be sure that the specific user is created before my recipe is processed.
Within myuseradd recipe I've got some chown command that works fine, but outside that recipe I've got the problem stated in the previous mail...
Davide
In data martedì 15 ottobre 2013 11:38:21, Paul Eggleton ha scritto:
Quoted 36 lines
Hi Davide,
Quoted 25 lines · On Tuesday 15 October 2013 12:02:20 Davide Soldan wrote:
in my recipe I want to change owner and permission of a file, so I wrote:
do_install() { ls -la ${D}/opt/user chown -R user ${D}/opt/user chgrp -R user ${D}/opt/user ls -la ${D}/opt/user chmod 754 ${D}/opt/user/user.sh ls -la ${D}/opt/user }the output of ls commands is:
drwxr-xr-x 8 root root 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
-rw-r--r-- 1 *root root* 55753 Aug 2 08:48user.shdrwxr-xr-x 8 user user 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
-rw-r--r-- 1 *user user* 55753 Aug 2 08:48user.shdrwxr-xr-x 8 user user 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
*-rwxr-xr--* 1 user user 55753 Aug 2 08:48user.shQuoted 5 lines
So the change of owner and permission works fine in
do_installphase. Opening the final rootfs tarball, however, the fileuser.shhas still 754 permission but root as owner...sodo_packagedoesn't preserve owner change done indo_install? Or maybe I'm doing something wrong in changing file owner? Any ideas? Thanks to all!Does your recipe create the specified user via useradd.bbclass?
Quoted 4 lines
Cheers,
Paul
I solved with a postinstall script (that run at boot):
pkg_postinst_${PN}() {
#!/bin/sh -e
if [ x"$D" = "x" ]; then
chown -R user /opt/user
chgrp -R user /opt/user
else
exit 1
fi
}
Cheers
Davide
Quoted 42 lines · On Tuesday 15 October 2013 18:12:42 Davide Soldan wrote:
In data martedì 15 ottobre 2013 11:38:21, Paul Eggleton ha scritto:
Quoted 29 lines · On Tuesday 15 October 2013 12:02:20 Davide Soldan wrote:
Quoted 28 lines
in my recipe I want to change owner and permission of a file, so I wrote:
do_install(){ls -la ${D}/opt/user chown -R user ${D}/opt/user chgrp -R user ${D}/opt/user ls -la ${D}/opt/user chmod 754 ${D}/opt/user/user.sh ls -la ${D}/opt/user}
the output of ls commands is:
drwxr-xr-x 8 root root 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
-rw-r--r-- 1 *root root* 55753 Aug 2 08:48user.shdrwxr-xr-x 8 user user 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
-rw-r--r-- 1 *user user* 55753 Aug 2 08:48user.shdrwxr-xr-x 8 user user 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
*-rwxr-xr--* 1 user user 55753 Aug 2 08:48user.shQuoted 9 lines
Quoted 7 lines
So the change of owner and permission works fine in
do_installphase. Opening the final rootfs tarball, however, the fileuser.shhas still 754
permission but root as owner...sodo_packagedoesn't preserve owner change
done indo_install? Or maybe I'm doing something wrong in changing file owner? Any ideas? Thanks to all!Does your recipe create the specified user via useradd.bbclass?
I solved with a postinstall script (that run at boot):
Quoted 9 lines
pkg_postinst_${PN}() {
#!/bin/sh -e
if [ x"$D" = "x" ]; then
chown -R user/opt/user
chgrp -R user/opt/user
else
exit 1
fi
}
This shouldn't be necessary though. I honestly can't tell you why it doesn't work as specified. I think it might be worth filing a bug for this.
Cheers,
Paul
Signature · 2 lines
Paul Eggleton Intel Open Source Technology Centre
Quoted 54 lines · On Tuesday 15 October 2013 17:18:35 Paul Eggleton wrote:
Quoted 53 lines · On Tuesday 15 October 2013 18:12:42 Davide Soldan wrote:
In data martedì 15 ottobre 2013 11:38:21, Paul Eggleton ha scritto:
Quoted 29 lines · On Tuesday 15 October 2013 12:02:20 Davide Soldan wrote:
Quoted 28 lines
in my recipe I want to change owner and permission of a file, so I wrote:
do_install(){ls -la ${D}/opt/user chown -R user ${D}/opt/user chgrp -R user ${D}/opt/user ls -la ${D}/opt/user chmod 754 ${D}/opt/user/user.sh ls -la ${D}/opt/user}
the output of ls commands is:
drwxr-xr-x 8 root root 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
-rw-r--r-- 1 *root root* 55753 Aug 2 08:48user.shdrwxr-xr-x 8 user user 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
-rw-r--r-- 1 *user user* 55753 Aug 2 08:48user.shdrwxr-xr-x 8 user user 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
*-rwxr-xr--* 1 user user 55753 Aug 2 08:48user.shQuoted 10 lines
Quoted 8 lines
So the change of owner and permission works fine in
do_installphase. Opening the final rootfs tarball, however, the fileuser.shhas still 754
permission but root as owner...sodo_packagedoesn't preserve owner change
done indo_install? Or maybe I'm doing something wrong in changing file
owner? Any ideas? Thanks to all!Does your recipe create the specified user via useradd.bbclass?
I solved with a postinstall script (that run at boot):
pkg_postinst_${PN}() {
#!/bin/sh -e
if [ x"$D" = "x" ]; thenchown -R user
/opt/user
chgrp -R user/opt/userelse
Quoted 8 lines
Quoted 5 lines
exit 1
fi
}
This shouldn't be necessary though. I honestly can't tell you why it doesn't work as specified. I think it might be worth filing a bug for this.
Actually, thinking about it I don't think this is expected to work. Typically, recipes that need a specific user to exist use useradd.bbclass themselves rather than depending upon another recipe that does it. However, if you do need to do it in a separate recipe (e.g. because multiple recipes use the same user account), just adding the other recipe to DEPENDS does not guarantee that it will be around at runtime - the actual package generated by the other recipe (usually the same name) would need to be added to RDEPENDS_${PN}. Additionally, if you do this, you should be able to have your postinstall script run at all times; it should not need to be guarded to run only on the target (although https://bugzilla.yoctoproject.org/show_bug.cgi?id=5318 may interfere with this if you are using ipk or deb.)
Cheers,
Paul
Signature · 2 lines
Paul Eggleton Intel Open Source Technology Centre
In data martedì 15 ottobre 2013 17:18:35, Paul Eggleton ha scritto:
Quoted 53 lines · On Tuesday 15 October 2013 18:12:42 Davide Soldan wrote:
Quoted 42 lines
In data martedì 15 ottobre 2013 11:38:21, Paul Eggleton ha scritto:
Quoted 29 lines · On Tuesday 15 October 2013 12:02:20 Davide Soldan wrote:
Quoted 28 lines
in my recipe I want to change owner and permission of a file, so I wrote:
do_install(){ls -la ${D}/opt/user chown -R user ${D}/opt/user chgrp -R user ${D}/opt/user ls -la ${D}/opt/user chmod 754 ${D}/opt/user/user.sh ls -la ${D}/opt/user}
the output of ls commands is:
drwxr-xr-x 8 root root 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
-rw-r--r-- 1 *root root* 55753 Aug 2 08:48user.shdrwxr-xr-x 8 user user 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
-rw-r--r-- 1 *user user* 55753 Aug 2 08:48user.shdrwxr-xr-x 8 user user 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
*-rwxr-xr--* 1 user user 55753 Aug 2 08:48user.shQuoted 9 lines
Quoted 7 lines
So the change of owner and permission works fine in
do_installphase. Opening the final rootfs tarball, however, the fileuser.shhas still 754
permission but root as owner...sodo_packagedoesn't preserve owner change
done indo_install? Or maybe I'm doing something wrong in changing file owner? Any ideas? Thanks to all!Does your recipe create the specified user via useradd.bbclass?
I solved with a postinstall script (that run at boot):
Quoted 9 lines
pkg_postinst_${PN}() {
#!/bin/sh -e
if [ x"$D" = "x" ]; then
chown -R user/opt/user
chgrp -R user/opt/user
else
exit 1
fi
}
Quoted 7 lines
This shouldn't be necessary though. I honestly can't tell you why it doesn't work as specified. I think it might be worth filing a bug for this.
Cheers,
Paul
I'm so sorry Paul, but my mail client missed your last email and so I filed a bug uselessly...
I tried, as you suggested, to add the package that create the user to the RDEPENDS_${PN} removing the postinstall scripi. That worked setting the right owner with chown/chgrp in do_install... Thank you so much. I very sorry for the useless bug opened...can I close it by myself?
Cheers
Davide
Hi Davide,
Quoted 70 lines · On Friday 18 October 2013 15:31:22 Davide Soldan wrote:
In data martedì 15 ottobre 2013 17:18:35, Paul Eggleton ha scritto:
Quoted 60 lines · On Tuesday 15 October 2013 18:12:42 Davide Soldan wrote:
Quoted 59 lines
In data martedì 15 ottobre 2013 11:38:21, Paul Eggleton ha scritto:
Quoted 29 lines · On Tuesday 15 October 2013 12:02:20 Davide Soldan wrote:
Quoted 28 lines
in my recipe I want to change owner and permission of a file, so I wrote:
do_install(){ls -la ${D}/opt/user chown -R user ${D}/opt/user chgrp -R user ${D}/opt/user ls -la ${D}/opt/user chmod 754 ${D}/opt/user/user.sh ls -la ${D}/opt/user}
the output of ls commands is:
drwxr-xr-x 8 root root 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
-rw-r--r-- 1 *root root* 55753 Aug 2 08:48user.shdrwxr-xr-x 8 user user 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
-rw-r--r-- 1 *user user* 55753 Aug 2 08:48user.shdrwxr-xr-x 8 user user 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
*-rwxr-xr--* 1 user user 55753 Aug 2 08:48user.shQuoted 12 lines
Quoted 10 lines
So the change of owner and permission works fine in
do_installphase.
Opening the final rootfs tarball, however, the fileuser.shhas still
754
permission but root as owner...sodo_packagedoesn't preserve owner change
done indo_install? Or maybe I'm doing something wrong in changing file
owner? Any ideas? Thanks to all!Does your recipe create the specified user via useradd.bbclass?
I solved with a postinstall script (that run at boot):
pkg_postinst_${PN}() {
#!/bin/sh -e
if [ x"$D" = "x" ]; thenchown -R user
/opt/user
chgrp -R user/opt/userelse
exit 1
fi
Quoted 8 lines
Quoted 1 line
}
This shouldn't be necessary though. I honestly can't tell you why it doesn't work as specified. I think it might be worth filing a bug for this.
Cheers,
Paul
Quoted 6 lines
I'm so sorry Paul, but my mail client missed your last email and so I filed a bug uselessly... I tried, as you suggested, to add the package that create the user to the RDEPENDS_${PN} removing the postinstall scripi. That worked setting the right owner with chown/chgrp in
do_install... Thank you so much. I very sorry for the useless bug opened...can I close it by myself?
I've marked it resolved. No problem about filing it, at least it's now there for reference if anyone hits the same situation :)
I think it's fair to say we need to look at how to better document all of this stuff in the manual. We could probably afford to dedicate a small section on how to deal with adding/modifying users and file ownership. Scott, could you add this to your todo list?
Cheers,
Paul
Signature · 2 lines
Paul Eggleton Intel Open Source Technology Centre
In data venerdì 18 ottobre 2013 14:38:27, Paul Eggleton ha scritto:
Quoted 83 lines
Hi Davide,
Quoted 70 lines · On Friday 18 October 2013 15:31:22 Davide Soldan wrote:
In data martedì 15 ottobre 2013 17:18:35, Paul Eggleton ha scritto:
Quoted 60 lines · On Tuesday 15 October 2013 18:12:42 Davide Soldan wrote:
Quoted 59 lines
In data martedì 15 ottobre 2013 11:38:21, Paul Eggleton ha scritto:
Quoted 29 lines · On Tuesday 15 October 2013 12:02:20 Davide Soldan wrote:
Quoted 28 lines
in my recipe I want to change owner and permission of a file, so I wrote:
do_install(){ls -la ${D}/opt/user chown -R user ${D}/opt/user chgrp -R user ${D}/opt/user ls -la ${D}/opt/user chmod 754 ${D}/opt/user/user.sh ls -la ${D}/opt/user}
the output of ls commands is:
drwxr-xr-x 8 root root 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
-rw-r--r-- 1 *root root* 55753 Aug 2 08:48user.shdrwxr-xr-x 8 user user 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
-rw-r--r-- 1 *user user* 55753 Aug 2 08:48user.shdrwxr-xr-x 8 user user 4096 Oct 15 11:13 .
drwxr-xr-x 3 root root 4096 Oct 15 11:13 ..
*-rwxr-xr--* 1 user user 55753 Aug 2 08:48user.shQuoted 12 lines
Quoted 10 lines
So the change of owner and permission works fine in
do_installphase.
Opening the final rootfs tarball, however, the fileuser.shhas still
754
permission but root as owner...sodo_packagedoesn't preserve owner change
done indo_install? Or maybe I'm doing something wrong in changing file
owner? Any ideas? Thanks to all!Does your recipe create the specified user via useradd.bbclass?
I solved with a postinstall script (that run at boot):
pkg_postinst_${PN}() {
#!/bin/sh -e
if [ x"$D" = "x" ]; thenchown -R user
/opt/user
chgrp -R user/opt/userelse
exit 1
fi
Quoted 8 lines
Quoted 1 line
}
This shouldn't be necessary though. I honestly can't tell you why it doesn't work as specified. I think it might be worth filing a bug for this.
Cheers,
PaulQuoted 6 lines
I'm so sorry Paul, but my mail client missed your last email and so I filed a bug uselessly... I tried, as you suggested, to add the package that create the user to the RDEPENDS_${PN} removing the postinstall scripi. That worked setting the right owner with chown/chgrp in
do_install... Thank you so much. I very sorry for the useless bug opened...can I close it by myself?I've marked it resolved. No problem about filing it, at least it's now there for reference if anyone hits the same situation :)
Quoted 9 lines
I think it's fair to say we need to look at how to better document all of this stuff in the manual. We could probably afford to dedicate a small section on how to deal with adding/modifying users and file ownership. Scott, could you add this to your todo list?
Cheers,
Paul
Very good idea! When I was looking for information about how to add/modify users and file ownership I missed a bit of official documentation! Cheers
Davide