mfd: arizona: Update DT binding documentation for inmode

index 7665aa95..cbcd2d6 100644
@@ -49,12 +49,11 @@ Optional properties:
     a value that is out of range for a 16 bit register then the chip default
     will be used. If present exactly five values must be specified.
 
-  - wlf,inmode : A list of INn_MODE register values, where n is the number
-    of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
-    2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
-    If present, values must be specified less than or equal to the number of
-    input singals. If values less than the number of input signals, elements
-    that has not been specifed are set to 0 by default.
+  - wlf,inmode : A list of the mode for each input. Each input can be set to
+    differential, single-ended or a digital microphone. Defines for all values
+    (ARIZONA_INMODE_xxxx) are located in <dt-bindings/mfd/arizona.txt>. If
+    present, the number of values should be less than or equal to the number
+    of inputs, unspecified inputs will use the chip default.
 
   - wlf,dmic-ref : DMIC reference voltage source for each input, can be
     selected from either MICVDD or one of the MICBIAS's, defines