Skip to contentSkip to conversation

Fix recent watermark breakage (v2)

PATCH Applied Matt Roper 5 participants 12 messages Mar 9, 2015 – Mar 10, 2015

Subsystems (2)
lore
Share & tools
lore

Matt Roper

author
#0 lore raw

cover Fix recent watermark breakage (v2)

Simplified the series of fixes; we leave intel_crtc->active alone for now (since it's tightly tied to our current legacy modeset pipeline) and use it in place of intel_crtc_active() in the watermark code. As Ander's work on atomic CRTC state progresses, some of the places we use intel_crtc->active will need to be converted to crtc->state->active instead.

Matt Roper (3):
drm/i915: Update intel_crtc_active() to use state values (v2) drm/i915: Use crtc->state->active in ilk/skl watermark calculations

    (v3)

drm/i915: Don't assume primary & cursor are always on for wm
calculation (v3)

 drivers/gpu/drm/i915/intel_display.c |   6 +-
 drivers/gpu/drm/i915/intel_pm.c      | 129 ++++++++++++++++++++++++-----------
 2 files changed, 95 insertions(+), 40 deletions(-)
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#1 lore raw

PATCH 1/3 drm/i915: Update intel_crtc_active() to use state values (v2)

With the switch to atomic plumbing for planes, some of our commit-time work (e.g., watermarks) is done after the new atomic state is swapped into the relevant DRM object, but before the DRM core has a chance to update its legacy state values. Switch intel_crtc_active() to look at the state objects rather than legacy fields to ensure we operate on the proper values.

Note that we're continuing to use intel_crtc->active here for the time being since crtc->state isn't really hooked up yet. Once CRTC states are wired up properly, we'll want to switch this over to use crtc->state->active instead.

v2: Switch back to intel_crtc->active for now; when Ander's work on CRTC

    states is ready, we can flip this over to use crtc->state->active
    instead. (Ville)
---
 drivers/gpu/drm/i915/intel_display.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_display.c +5 -1
index 43d3575..e35fd7f 100644
@@ -896,8 +896,12 @@ bool intel_crtc_active(struct drm_crtc *crtc)
 	 *
 	 * We can ditch the crtc->primary->fb check as soon as we can
 	 * properly reconstruct framebuffers.
+	 *
+	 * FIXME: The intel_crtc->active here should be switched to
+	 * crtc->state->active once we have proper CRTC states wired up
+	 * for atomic.
 	 */
-	return intel_crtc->active && crtc->primary->fb &&
+	return intel_crtc->active && crtc->primary->state->fb &&
 		intel_crtc->config->base.adjusted_mode.crtc_clock;
 }
 
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#2 lore raw

PATCH 2/3 drm/i915: Use crtc->state->active in ilk/skl watermark calculations (v3)

In reply to Matt Roper

Existing watermark code calls intel_crtc_active() to determine whether a CRTC is active for the purpose of watermark calculations (and bails out early if it determines the CRTC is not active). However intel_crtc_active() only returns true if crtc->primary->fb is non-NULL, which isn't appropriate in the modern age of universal planes and atomic modeset since userspace can now disable the primary plane, but leave the CRTC (and other planes) running.

Note that commit

commit 0fda65680e92545caea5be7805a7f0a617fb6c20
Author: Tvrtko Ursulin <[email protected]>
Date: Fri Feb 27 15:12:35 2015 +0000

drm/i915/skl: Update watermarks for Y tiling

adds a test for primary plane enable/disable to trigger a watermark update (previously we ignored updates to primary planes, which wasn't really correct, but we got lucky since we always pretended the primary plane was on). Tvrtko's patch tries to update watermarks when we re-enable the primary plane, but that watermark computation gets aborted early because intel_crtc_active() returns false due to the disabled primary plane.

Switch the ILK and SKL watermark code over to use crtc->state->active rather than calling intel_crtc_active() so that we'll properly compute watermarks when re-enabling the primary plane.

Note that this commit doesn't touch callsites in the watermark code for older platforms since there were concerns that doing so would lead to other types of breakage.

Also note that all of the watermark calculation at the moment takes place after new crtc/plane states are swapped into the DRM objects. This will change in the future, so we'll be working with in-flight state objects, but for the time being, crtc->state is what we want to operate on.

v2: Don't drop primary->fb check from intel_crtc_active(), but rather replace
ILK/SKL callsites with direct tests of crtc->state->active. There is concern that messing with intel_crtc_active() will lead to other breakage for old hardware platforms. (Ville)

v3: Use intel_crtc->active for now rather than crtc->state->active since
we don't have CRTC states properly hooked up and initialized yet. We'll defer the switch to crtc->state->active until the atomic CRTC state work is farther along. (Ville)

---
 drivers/gpu/drm/i915/intel_pm.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +8 -8
index 4f04fab..a06a2c7 100644
@@ -1701,7 +1701,7 @@ hsw_compute_linetime_wm(struct drm_device *dev, struct drm_crtc *crtc)
 	struct drm_display_mode *mode = &intel_crtc->config->base.adjusted_mode;
 	u32 linetime, ips_linetime;
 
-	if (!intel_crtc_active(crtc))
+	if (!intel_crtc->active)
 		return 0;
 
 	/* The WM are computed with base on how long it takes to fill a single
@@ -1956,7 +1956,7 @@ static void ilk_compute_wm_parameters(struct drm_crtc *crtc,
 	enum pipe pipe = intel_crtc->pipe;
 	struct drm_plane *plane;
 
-	if (!intel_crtc_active(crtc))
+	if (!intel_crtc->active)
 		return;
 
 	p->active = true;
@@ -2468,7 +2468,7 @@ skl_ddb_get_pipe_allocation_limits(struct drm_device *dev,
 
 	nth_active_pipe = 0;
 	for_each_crtc(dev, crtc) {
-		if (!intel_crtc_active(crtc))
+		if (!to_intel_crtc(crtc)->active)
 			continue;
 
 		if (crtc == for_crtc)
@@ -2708,7 +2708,7 @@ static void skl_compute_wm_global_parameters(struct drm_device *dev,
 	struct drm_plane *plane;
 
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
-		config->num_pipes_active += intel_crtc_active(crtc);
+		config->num_pipes_active += to_intel_crtc(crtc)->active;
 
 	/* FIXME: I don't think we need those two global parameters on SKL */
 	list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
@@ -2729,7 +2729,7 @@ static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc,
 	struct drm_framebuffer *fb;
 	int i = 1; /* Index for sprite planes start */
 
-	p->active = intel_crtc_active(crtc);
+	p->active = intel_crtc->active;
 	if (p->active) {
 		p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal;
 		p->pixel_rate = skl_pipe_pixel_rate(intel_crtc->config);
@@ -2860,7 +2860,7 @@ static void skl_compute_wm_level(const struct drm_i915_private *dev_priv,
 static uint32_t
 skl_compute_linetime_wm(struct drm_crtc *crtc, struct skl_pipe_wm_parameters *p)
 {
-	if (!intel_crtc_active(crtc))
+	if (!to_intel_crtc(crtc)->active)
 		return 0;
 
 	return DIV_ROUND_UP(8 * p->pipe_htotal * 1000, p->pixel_rate);
@@ -3407,7 +3407,7 @@ static void skl_pipe_wm_get_hw_state(struct drm_crtc *crtc)
 		hw->plane_trans[pipe][i] = I915_READ(PLANE_WM_TRANS(pipe, i));
 	hw->cursor_trans[pipe] = I915_READ(CUR_WM_TRANS(pipe));
 
-	if (!intel_crtc_active(crtc))
+	if (!intel_crtc->active)
 		return;
 
 	hw->dirty[pipe] = true;
@@ -3462,7 +3462,7 @@ static void ilk_pipe_wm_get_hw_state(struct drm_crtc *crtc)
 	if (IS_HASWELL(dev) || IS_BROADWELL(dev))
 		hw->wm_linetime[pipe] = I915_READ(PIPE_WM_LINETIME(pipe));
 
-	active->pipe_enabled = intel_crtc_active(crtc);
+	active->pipe_enabled = intel_crtc->active;
 
 	if (active->pipe_enabled) {
 		u32 tmp = hw->wm_pipe[pipe];
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

Re: [PATCH 2/3] drm/i915: Use crtc->state->active in ilk/skl watermark calculations (v3)

Quoted 45 lines · Matt Roper

Existing watermark code calls intel_crtc_active() to determine whether a CRTC is active for the purpose of watermark calculations (and bails out early if it determines the CRTC is not active). However intel_crtc_active() only returns true if crtc->primary->fb is non-NULL, which isn't appropriate in the modern age of universal planes and atomic modeset since userspace can now disable the primary plane, but leave the CRTC (and other planes) running.

Note that commit

commit 0fda65680e92545caea5be7805a7f0a617fb6c20
Author: Tvrtko Ursulin <[email protected]>
Date: Fri Feb 27 15:12:35 2015 +0000

drm/i915/skl: Update watermarks for Y tiling

adds a test for primary plane enable/disable to trigger a watermark update (previously we ignored updates to primary planes, which wasn't really correct, but we got lucky since we always pretended the primary plane was on). Tvrtko's patch tries to update watermarks when we re-enable the primary plane, but that watermark computation gets aborted early because intel_crtc_active() returns false due to the disabled primary plane.

Switch the ILK and SKL watermark code over to use crtc->state->active rather than calling intel_crtc_active() so that we'll properly compute watermarks when re-enabling the primary plane.

Note that this commit doesn't touch callsites in the watermark code for older platforms since there were concerns that doing so would lead to other types of breakage.

Also note that all of the watermark calculation at the moment takes place after new crtc/plane states are swapped into the DRM objects. This will change in the future, so we'll be working with in-flight state objects, but for the time being, crtc->state is what we want to operate on.

v2: Don't drop primary->fb check from intel_crtc_active(), but rather replace
ILK/SKL callsites with direct tests of crtc->state->active. There is concern that messing with intel_crtc_active() will lead to other breakage for old hardware platforms. (Ville)

v3: Use intel_crtc->active for now rather than crtc->state->active since
we don't have CRTC states properly hooked up and initialized yet. We'll defer the switch to crtc->state->active until the atomic CRTC state work is farther along. (Ville)

Quoted 4 lines

Merged up to this one, thanks.
-Daniel

Quoted 87 lines
---
 drivers/gpu/drm/i915/intel_pm.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +8 -8
index 4f04fab..a06a2c7 100644
@@ -1701,7 +1701,7 @@ hsw_compute_linetime_wm(struct drm_device *dev, struct drm_crtc *crtc)
 	struct drm_display_mode *mode = &intel_crtc->config->base.adjusted_mode;
 	u32 linetime, ips_linetime;
 
-	if (!intel_crtc_active(crtc))
+	if (!intel_crtc->active)
 		return 0;
 
 	/* The WM are computed with base on how long it takes to fill a single
@@ -1956,7 +1956,7 @@ static void ilk_compute_wm_parameters(struct drm_crtc *crtc,
 	enum pipe pipe = intel_crtc->pipe;
 	struct drm_plane *plane;
 
-	if (!intel_crtc_active(crtc))
+	if (!intel_crtc->active)
 		return;
 
 	p->active = true;
@@ -2468,7 +2468,7 @@ skl_ddb_get_pipe_allocation_limits(struct drm_device *dev,
 
 	nth_active_pipe = 0;
 	for_each_crtc(dev, crtc) {
-		if (!intel_crtc_active(crtc))
+		if (!to_intel_crtc(crtc)->active)
 			continue;
 
 		if (crtc == for_crtc)
@@ -2708,7 +2708,7 @@ static void skl_compute_wm_global_parameters(struct drm_device *dev,
 	struct drm_plane *plane;
 
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
-		config->num_pipes_active += intel_crtc_active(crtc);
+		config->num_pipes_active += to_intel_crtc(crtc)->active;
 
 	/* FIXME: I don't think we need those two global parameters on SKL */
 	list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
@@ -2729,7 +2729,7 @@ static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc,
 	struct drm_framebuffer *fb;
 	int i = 1; /* Index for sprite planes start */
 
-	p->active = intel_crtc_active(crtc);
+	p->active = intel_crtc->active;
 	if (p->active) {
 		p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal;
 		p->pixel_rate = skl_pipe_pixel_rate(intel_crtc->config);
@@ -2860,7 +2860,7 @@ static void skl_compute_wm_level(const struct drm_i915_private *dev_priv,
 static uint32_t
 skl_compute_linetime_wm(struct drm_crtc *crtc, struct skl_pipe_wm_parameters *p)
 {
-	if (!intel_crtc_active(crtc))
+	if (!to_intel_crtc(crtc)->active)
 		return 0;
 
 	return DIV_ROUND_UP(8 * p->pipe_htotal * 1000, p->pixel_rate);
@@ -3407,7 +3407,7 @@ static void skl_pipe_wm_get_hw_state(struct drm_crtc *crtc)
 		hw->plane_trans[pipe][i] = I915_READ(PLANE_WM_TRANS(pipe, i));
 	hw->cursor_trans[pipe] = I915_READ(CUR_WM_TRANS(pipe));
 
-	if (!intel_crtc_active(crtc))
+	if (!intel_crtc->active)
 		return;
 
 	hw->dirty[pipe] = true;
@@ -3462,7 +3462,7 @@ static void ilk_pipe_wm_get_hw_state(struct drm_crtc *crtc)
 	if (IS_HASWELL(dev) || IS_BROADWELL(dev))
 		hw->wm_linetime[pipe] = I915_READ(PIPE_WM_LINETIME(pipe));
 
-	active->pipe_enabled = intel_crtc_active(crtc);
+	active->pipe_enabled = intel_crtc->active;
 
 	if (active->pipe_enabled) {
 		u32 tmp = hw->wm_pipe[pipe];
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#4 lore raw

PATCH 3/3 drm/i915: Don't assume primary & cursor are always on for wm calculation (v3)

In reply to Matt Roper

Current ILK-style watermark code assumes the primary plane and cursor plane are always enabled. This assumption, along with the combination of two independent commits that got merged at the same time, results in a NULL dereference. The offending commits are:

        commit fd2d61341bf39d1054256c07d6eddd624ebc4241
        Author: Matt Roper <[email protected]>
        Date:   Fri Feb 27 10:12:01 2015 -0800

            drm/i915: Use plane->state->fb in watermark code (v2)

and

commit 0fda65680e92545caea5be7805a7f0a617fb6c20
Author: Tvrtko Ursulin <[email protected]>
Date: Fri Feb 27 15:12:35 2015 +0000

drm/i915/skl: Update watermarks for Y tiling

The first commit causes us to use the FB from plane->state->fb rather than the legacy plane->fb, which is updated a bit later in the process.

The second commit includes a change that now triggers watermark reprogramming on primary plane enable/disable where we didn't have one before (which wasn't really correct, but we had been getting lucky because we always calculated as if the primary plane was on).

Together, these two commits cause the watermark calculation to (properly) see plane->state->fb = NULL when we're in the process of disabling the primary plane. However the existing watermark code assumes there's always a primary fb and tries to dereference it to find out pixel format / bpp information.

The fix is to make ILK-style watermark calculation actually check the true status of primary & cursor planes and adjust our watermark logic accordingly.

v2: Update unchecked uses of state->fb for other platforms (pnv, skl,
etc.). Note that this is just a temporary fix. Ultimately the useful information is going to be computed at check time and stored right in the state structures so that we don't have to figure this all out while we're supposed to be programming the watermarks. (caught by Tvrtko)

v3: Fix a couple copy/paste mistakes in SKL code. (Tvrtko)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89388

---
 drivers/gpu/drm/i915/intel_pm.c | 113 +++++++++++++++++++++++++++++-----------
 1 file changed, 82 insertions(+), 31 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +82 -31
index a06a2c7..207c973 100644
@@ -608,12 +608,17 @@ static void pineview_update_wm(struct drm_crtc *unused_crtc)
 	crtc = single_enabled_crtc(dev);
 	if (crtc) {
 		const struct drm_display_mode *adjusted_mode;
-		int pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+		int pixel_size;
 		int clock;
 
 		adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode;
 		clock = adjusted_mode->crtc_clock;
 
+		if (crtc->primary->state->fb)
+			pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+		else
+			pixel_size = 4;
+
 		/* Display SR */
 		wm = intel_calculate_wm(clock, &pineview_display_wm,
 					pineview_display_wm.fifo_size,
@@ -684,7 +689,11 @@ static bool g4x_compute_wm0(struct drm_device *dev,
 	clock = adjusted_mode->crtc_clock;
 	htotal = adjusted_mode->crtc_htotal;
 	hdisplay = to_intel_crtc(crtc)->config->pipe_src_w;
-	pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+
+	if (crtc->primary->state->fb)
+		pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+	else
+		pixel_size = 4;
 
 	/* Use the small buffer method to calculate plane watermark */
 	entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
@@ -771,7 +780,11 @@ static bool g4x_compute_srwm(struct drm_device *dev,
 	clock = adjusted_mode->crtc_clock;
 	htotal = adjusted_mode->crtc_htotal;
 	hdisplay = to_intel_crtc(crtc)->config->pipe_src_w;
-	pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+
+	if (crtc->primary->state->fb)
+		pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+	else
+		pixel_size = 4;
 
 	line_time_us = max(htotal * 1000 / clock, 1);
 	line_count = (latency_ns / line_time_us + 1000) / 1000;
@@ -1118,10 +1131,15 @@ static void i965_update_wm(struct drm_crtc *unused_crtc)
 		int clock = adjusted_mode->crtc_clock;
 		int htotal = adjusted_mode->crtc_htotal;
 		int hdisplay = to_intel_crtc(crtc)->config->pipe_src_w;
-		int pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+		int pixel_size;
 		unsigned long line_time_us;
 		int entries;
 
+		if (crtc->primary->state->fb)
+			pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+		else
+			pixel_size = 4;
+
 		line_time_us = max(htotal * 1000 / clock, 1);
 
 		/* Use ns/us then divide to preserve precision */
@@ -1195,7 +1213,13 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 	crtc = intel_get_crtc_for_plane(dev, 0);
 	if (intel_crtc_active(crtc)) {
 		const struct drm_display_mode *adjusted_mode;
-		int cpp = crtc->primary->state->fb->bits_per_pixel / 8;
+		int cpp;
+
+		if (crtc->primary->state->fb)
+			cpp = crtc->primary->state->fb->bits_per_pixel / 8;
+		else
+			cpp = 4;
+
 		if (IS_GEN2(dev))
 			cpp = 4;
 
@@ -1217,7 +1241,13 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 	crtc = intel_get_crtc_for_plane(dev, 1);
 	if (intel_crtc_active(crtc)) {
 		const struct drm_display_mode *adjusted_mode;
-		int cpp = crtc->primary->state->fb->bits_per_pixel / 8;
+		int cpp;
+
+		if (crtc->primary->state->fb)
+			cpp = crtc->primary->state->fb->bits_per_pixel / 8;
+		else
+			cpp = 4;
+
 		if (IS_GEN2(dev))
 			cpp = 4;
 
@@ -1243,7 +1273,7 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 		obj = intel_fb_obj(enabled->primary->state->fb);
 
 		/* self-refresh seems busted with untiled */
-		if (obj->tiling_mode == I915_TILING_NONE)
+		if (!obj || obj->tiling_mode == I915_TILING_NONE)
 			enabled = NULL;
 	}
 
@@ -1264,10 +1294,15 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 		int clock = adjusted_mode->crtc_clock;
 		int htotal = adjusted_mode->crtc_htotal;
 		int hdisplay = to_intel_crtc(enabled)->config->pipe_src_w;
-		int pixel_size = enabled->primary->state->fb->bits_per_pixel / 8;
+		int pixel_size;
 		unsigned long line_time_us;
 		int entries;
 
+		if (enabled->primary->state->fb)
+			pixel_size = enabled->primary->state->fb->bits_per_pixel / 8;
+		else
+			pixel_size = 4;
+
 		line_time_us = max(htotal * 1000 / clock, 1);
 
 		/* Use ns/us then divide to preserve precision */
@@ -1962,13 +1997,25 @@ static void ilk_compute_wm_parameters(struct drm_crtc *crtc,
 	p->active = true;
 	p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal;
 	p->pixel_rate = ilk_pipe_pixel_rate(dev, crtc);
-	p->pri.bytes_per_pixel = crtc->primary->state->fb->bits_per_pixel / 8;
-	p->cur.bytes_per_pixel = 4;
+
+	if (crtc->primary->state->fb) {
+		p->pri.enabled = true;
+		p->pri.bytes_per_pixel =
+			crtc->primary->state->fb->bits_per_pixel / 8;
+	} else {
+		p->pri.enabled = false;
+		p->pri.bytes_per_pixel = 0;
+	}
+
+	if (crtc->cursor->state->fb) {
+		p->cur.enabled = true;
+		p->cur.bytes_per_pixel = 4;
+	} else {
+		p->cur.enabled = false;
+		p->cur.bytes_per_pixel = 0;
+	}
 	p->pri.horiz_pixels = intel_crtc->config->pipe_src_w;
 	p->cur.horiz_pixels = intel_crtc->base.cursor->state->crtc_w;
-	/* TODO: for now, assume primary and cursor planes are always enabled. */
-	p->pri.enabled = true;
-	p->cur.enabled = true;
 
 	drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) {
 		struct intel_plane *intel_plane = to_intel_plane(plane);
@@ -2734,27 +2781,31 @@ static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc,
 		p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal;
 		p->pixel_rate = skl_pipe_pixel_rate(intel_crtc->config);
 
-		/*
-		 * For now, assume primary and cursor planes are always enabled.
-		 */
-		p->plane[0].enabled = true;
-		p->plane[0].bytes_per_pixel =
-			crtc->primary->state->fb->bits_per_pixel / 8;
-		p->plane[0].horiz_pixels = intel_crtc->config->pipe_src_w;
-		p->plane[0].vert_pixels = intel_crtc->config->pipe_src_h;
-		p->plane[0].tiling = DRM_FORMAT_MOD_NONE;
 		fb = crtc->primary->state->fb;
-		/*
-		 * Framebuffer can be NULL on plane disable, but it does not
-		 * matter for watermarks if we assume no tiling in that case.
-		 */
-		if (fb)
+		if (fb) {
+			p->plane[0].enabled = true;
+			p->plane[0].bytes_per_pixel = fb->bits_per_pixel / 8;
 			p->plane[0].tiling = fb->modifier[0];
+		} else {
+			p->plane[0].enabled = false;
+			p->plane[0].bytes_per_pixel = 0;
+			p->plane[0].tiling = DRM_FORMAT_MOD_NONE;
+		}
+		p->plane[0].horiz_pixels = intel_crtc->config->pipe_src_w;
+		p->plane[0].vert_pixels = intel_crtc->config->pipe_src_h;
 
-		p->cursor.enabled = true;
-		p->cursor.bytes_per_pixel = 4;
-		p->cursor.horiz_pixels = intel_crtc->base.cursor->state->crtc_w ?
-					 intel_crtc->base.cursor->state->crtc_w : 64;
+		fb = crtc->cursor->state->fb;
+		if (fb) {
+			p->cursor.enabled = true;
+			p->cursor.bytes_per_pixel = fb->bits_per_pixel / 8;
+			p->cursor.horiz_pixels = crtc->cursor->state->crtc_w;
+			p->cursor.vert_pixels = crtc->cursor->state->crtc_h;
+		} else {
+			p->cursor.enabled = false;
+			p->cursor.bytes_per_pixel = 0;
+			p->cursor.horiz_pixels = 64;
+			p->cursor.vert_pixels = 64;
+		}
 	}
 
 	list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

Re: [PATCH 3/3] drm/i915: Don't assume primary & cursor are always on for wm calculation (v3)

Quoted 166 lines · Matt Roper

Current ILK-style watermark code assumes the primary plane and cursor plane are always enabled. This assumption, along with the combination of two independent commits that got merged at the same time, results in a NULL dereference. The offending commits are:

        commit fd2d61341bf39d1054256c07d6eddd624ebc4241
        Author: Matt Roper <[email protected]>
        Date:   Fri Feb 27 10:12:01 2015 -0800

            drm/i915: Use plane->state->fb in watermark code (v2)

and

commit 0fda65680e92545caea5be7805a7f0a617fb6c20
Author: Tvrtko Ursulin <[email protected]>
Date: Fri Feb 27 15:12:35 2015 +0000

drm/i915/skl: Update watermarks for Y tiling

The first commit causes us to use the FB from plane->state->fb rather than the legacy plane->fb, which is updated a bit later in the process.

The second commit includes a change that now triggers watermark reprogramming on primary plane enable/disable where we didn't have one before (which wasn't really correct, but we had been getting lucky because we always calculated as if the primary plane was on).

Together, these two commits cause the watermark calculation to (properly) see plane->state->fb = NULL when we're in the process of disabling the primary plane. However the existing watermark code assumes there's always a primary fb and tries to dereference it to find out pixel format / bpp information.

The fix is to make ILK-style watermark calculation actually check the true status of primary & cursor planes and adjust our watermark logic accordingly.

v2: Update unchecked uses of state->fb for other platforms (pnv, skl,
etc.). Note that this is just a temporary fix. Ultimately the useful information is going to be computed at check time and stored right in the state structures so that we don't have to figure this all out while we're supposed to be programming the watermarks. (caught by Tvrtko)

v3: Fix a couple copy/paste mistakes in SKL code. (Tvrtko)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89388

---
 drivers/gpu/drm/i915/intel_pm.c | 113 +++++++++++++++++++++++++++++-----------
 1 file changed, 82 insertions(+), 31 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +38 -8
index a06a2c7..207c973 100644
@@ -608,12 +608,17 @@ static void pineview_update_wm(struct drm_crtc *unused_crtc)
 	crtc = single_enabled_crtc(dev);
 	if (crtc) {
 		const struct drm_display_mode *adjusted_mode;
-		int pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+		int pixel_size;
 		int clock;
 
 		adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode;
 		clock = adjusted_mode->crtc_clock;
 
+		if (crtc->primary->state->fb)
+			pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+		else
+			pixel_size = 4;
+
 		/* Display SR */
 		wm = intel_calculate_wm(clock, &pineview_display_wm,
 					pineview_display_wm.fifo_size,
@@ -684,7 +689,11 @@ static bool g4x_compute_wm0(struct drm_device *dev,
 	clock = adjusted_mode->crtc_clock;
 	htotal = adjusted_mode->crtc_htotal;
 	hdisplay = to_intel_crtc(crtc)->config->pipe_src_w;
-	pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+
+	if (crtc->primary->state->fb)
+		pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+	else
+		pixel_size = 4;
 
 	/* Use the small buffer method to calculate plane watermark */
 	entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
@@ -771,7 +780,11 @@ static bool g4x_compute_srwm(struct drm_device *dev,
 	clock = adjusted_mode->crtc_clock;
 	htotal = adjusted_mode->crtc_htotal;
 	hdisplay = to_intel_crtc(crtc)->config->pipe_src_w;
-	pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+
+	if (crtc->primary->state->fb)
+		pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+	else
+		pixel_size = 4;
 
 	line_time_us = max(htotal * 1000 / clock, 1);
 	line_count = (latency_ns / line_time_us + 1000) / 1000;
@@ -1118,10 +1131,15 @@ static void i965_update_wm(struct drm_crtc *unused_crtc)
 		int clock = adjusted_mode->crtc_clock;
 		int htotal = adjusted_mode->crtc_htotal;
 		int hdisplay = to_intel_crtc(crtc)->config->pipe_src_w;
-		int pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+		int pixel_size;
 		unsigned long line_time_us;
 		int entries;
 
+		if (crtc->primary->state->fb)
+			pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+		else
+			pixel_size = 4;
+
 		line_time_us = max(htotal * 1000 / clock, 1);
 
 		/* Use ns/us then divide to preserve precision */
@@ -1195,7 +1213,13 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 	crtc = intel_get_crtc_for_plane(dev, 0);
 	if (intel_crtc_active(crtc)) {
 		const struct drm_display_mode *adjusted_mode;
-		int cpp = crtc->primary->state->fb->bits_per_pixel / 8;
+		int cpp;
+
+		if (crtc->primary->state->fb)
+			cpp = crtc->primary->state->fb->bits_per_pixel / 8;
+		else
+			cpp = 4;
+
 		if (IS_GEN2(dev))
 			cpp = 4;
 
@@ -1217,7 +1241,13 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 	crtc = intel_get_crtc_for_plane(dev, 1);
 	if (intel_crtc_active(crtc)) {
 		const struct drm_display_mode *adjusted_mode;
-		int cpp = crtc->primary->state->fb->bits_per_pixel / 8;
+		int cpp;
+
+		if (crtc->primary->state->fb)
+			cpp = crtc->primary->state->fb->bits_per_pixel / 8;
+		else
+			cpp = 4;
+
 		if (IS_GEN2(dev))
 			cpp = 4;
 
@@ -1243,7 +1273,7 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 		obj = intel_fb_obj(enabled->primary->state->fb);
 
 		/* self-refresh seems busted with untiled */
-		if (obj->tiling_mode == I915_TILING_NONE)
+		if (!obj || obj->tiling_mode == I915_TILING_NONE)
 			enabled = NULL;
 	}
 
@@ -1264,10 +1294,15 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 		int clock = adjusted_mode->crtc_clock;
 		int htotal = adjusted_mode->crtc_htotal;
 		int hdisplay = to_intel_crtc(enabled)->config->pipe_src_w;
-		int pixel_size = enabled->primary->state->fb->bits_per_pixel / 8;
+		int pixel_size;
 		unsigned long line_time_us;

drivers/gpu/drm/i915/intel_pm.c static void i9xx_update_wm(struct drm_crtc *unused_crtc) · line 1308

Quoted 10 lines
drivers/gpu/drm/i915/intel_pm.c +5 -0
 		int entries;
 
+		if (enabled->primary->state->fb)
+			pixel_size = enabled->primary->state->fb->bits_per_pixel / 8;
+		else
+			pixel_size = 4;
+
 		line_time_us = max(htotal * 1000 / clock, 1);
 
 		/* Use ns/us then divide to preserve precision */

With the change to intel_crtc_active() to look at state->fb I think you could drop all of the changes above, and just keep the changes below.

Quoted 88 lines
drivers/gpu/drm/i915/intel_pm.c +39 -23
@@ -1962,13 +1997,25 @@ static void ilk_compute_wm_parameters(struct drm_crtc *crtc,
 	p->active = true;
 	p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal;
 	p->pixel_rate = ilk_pipe_pixel_rate(dev, crtc);
-	p->pri.bytes_per_pixel = crtc->primary->state->fb->bits_per_pixel / 8;
-	p->cur.bytes_per_pixel = 4;
+
+	if (crtc->primary->state->fb) {
+		p->pri.enabled = true;
+		p->pri.bytes_per_pixel =
+			crtc->primary->state->fb->bits_per_pixel / 8;
+	} else {
+		p->pri.enabled = false;
+		p->pri.bytes_per_pixel = 0;
+	}
+
+	if (crtc->cursor->state->fb) {
+		p->cur.enabled = true;
+		p->cur.bytes_per_pixel = 4;
+	} else {
+		p->cur.enabled = false;
+		p->cur.bytes_per_pixel = 0;
+	}
 	p->pri.horiz_pixels = intel_crtc->config->pipe_src_w;
 	p->cur.horiz_pixels = intel_crtc->base.cursor->state->crtc_w;
-	/* TODO: for now, assume primary and cursor planes are always enabled. */
-	p->pri.enabled = true;
-	p->cur.enabled = true;
 
 	drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) {
 		struct intel_plane *intel_plane = to_intel_plane(plane);
@@ -2734,27 +2781,31 @@ static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc,
 		p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal;
 		p->pixel_rate = skl_pipe_pixel_rate(intel_crtc->config);
 
-		/*
-		 * For now, assume primary and cursor planes are always enabled.
-		 */
-		p->plane[0].enabled = true;
-		p->plane[0].bytes_per_pixel =
-			crtc->primary->state->fb->bits_per_pixel / 8;
-		p->plane[0].horiz_pixels = intel_crtc->config->pipe_src_w;
-		p->plane[0].vert_pixels = intel_crtc->config->pipe_src_h;
-		p->plane[0].tiling = DRM_FORMAT_MOD_NONE;
 		fb = crtc->primary->state->fb;
-		/*
-		 * Framebuffer can be NULL on plane disable, but it does not
-		 * matter for watermarks if we assume no tiling in that case.
-		 */
-		if (fb)
+		if (fb) {
+			p->plane[0].enabled = true;
+			p->plane[0].bytes_per_pixel = fb->bits_per_pixel / 8;
 			p->plane[0].tiling = fb->modifier[0];
+		} else {
+			p->plane[0].enabled = false;
+			p->plane[0].bytes_per_pixel = 0;
+			p->plane[0].tiling = DRM_FORMAT_MOD_NONE;
+		}
+		p->plane[0].horiz_pixels = intel_crtc->config->pipe_src_w;
+		p->plane[0].vert_pixels = intel_crtc->config->pipe_src_h;
 
-		p->cursor.enabled = true;
-		p->cursor.bytes_per_pixel = 4;
-		p->cursor.horiz_pixels = intel_crtc->base.cursor->state->crtc_w ?
-					 intel_crtc->base.cursor->state->crtc_w : 64;
+		fb = crtc->cursor->state->fb;
+		if (fb) {
+			p->cursor.enabled = true;
+			p->cursor.bytes_per_pixel = fb->bits_per_pixel / 8;
+			p->cursor.horiz_pixels = crtc->cursor->state->crtc_w;
+			p->cursor.vert_pixels = crtc->cursor->state->crtc_h;
+		} else {
+			p->cursor.enabled = false;
+			p->cursor.bytes_per_pixel = 0;
+			p->cursor.horiz_pixels = 64;
+			p->cursor.vert_pixels = 64;
+		}
 	}
 
 	list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#6 lore raw

Re: [PATCH 3/3] drm/i915: Don't assume primary & cursor are always on for wm calculation (v3)

Quoted 176 lines · Ville Syrjälä
Quoted 175 lines · Matt Roper

Current ILK-style watermark code assumes the primary plane and cursor plane are always enabled. This assumption, along with the combination of two independent commits that got merged at the same time, results in a NULL dereference. The offending commits are:

        commit fd2d61341bf39d1054256c07d6eddd624ebc4241
        Author: Matt Roper <[email protected]>
        Date:   Fri Feb 27 10:12:01 2015 -0800

            drm/i915: Use plane->state->fb in watermark code (v2)

and

commit 0fda65680e92545caea5be7805a7f0a617fb6c20
Author: Tvrtko Ursulin <[email protected]>
Date: Fri Feb 27 15:12:35 2015 +0000

drm/i915/skl: Update watermarks for Y tiling

The first commit causes us to use the FB from plane->state->fb rather than the legacy plane->fb, which is updated a bit later in the process.

The second commit includes a change that now triggers watermark reprogramming on primary plane enable/disable where we didn't have one before (which wasn't really correct, but we had been getting lucky because we always calculated as if the primary plane was on).

Together, these two commits cause the watermark calculation to (properly) see plane->state->fb = NULL when we're in the process of disabling the primary plane. However the existing watermark code assumes there's always a primary fb and tries to dereference it to find out pixel format / bpp information.

The fix is to make ILK-style watermark calculation actually check the true status of primary & cursor planes and adjust our watermark logic accordingly.

v2: Update unchecked uses of state->fb for other platforms (pnv, skl,
etc.). Note that this is just a temporary fix. Ultimately the useful information is going to be computed at check time and stored right in the state structures so that we don't have to figure this all out while we're supposed to be programming the watermarks. (caught by Tvrtko)

v3: Fix a couple copy/paste mistakes in SKL code. (Tvrtko)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89388

---
 drivers/gpu/drm/i915/intel_pm.c | 113 +++++++++++++++++++++++++++++-----------
 1 file changed, 82 insertions(+), 31 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +43 -8
index a06a2c7..207c973 100644
@@ -608,12 +608,17 @@ static void pineview_update_wm(struct drm_crtc *unused_crtc)
 	crtc = single_enabled_crtc(dev);
 	if (crtc) {
 		const struct drm_display_mode *adjusted_mode;
-		int pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+		int pixel_size;
 		int clock;
 
 		adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode;
 		clock = adjusted_mode->crtc_clock;
 
+		if (crtc->primary->state->fb)
+			pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+		else
+			pixel_size = 4;
+
 		/* Display SR */
 		wm = intel_calculate_wm(clock, &pineview_display_wm,
 					pineview_display_wm.fifo_size,
@@ -684,7 +689,11 @@ static bool g4x_compute_wm0(struct drm_device *dev,
 	clock = adjusted_mode->crtc_clock;
 	htotal = adjusted_mode->crtc_htotal;
 	hdisplay = to_intel_crtc(crtc)->config->pipe_src_w;
-	pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+
+	if (crtc->primary->state->fb)
+		pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+	else
+		pixel_size = 4;
 
 	/* Use the small buffer method to calculate plane watermark */
 	entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
@@ -771,7 +780,11 @@ static bool g4x_compute_srwm(struct drm_device *dev,
 	clock = adjusted_mode->crtc_clock;
 	htotal = adjusted_mode->crtc_htotal;
 	hdisplay = to_intel_crtc(crtc)->config->pipe_src_w;
-	pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+
+	if (crtc->primary->state->fb)
+		pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+	else
+		pixel_size = 4;
 
 	line_time_us = max(htotal * 1000 / clock, 1);
 	line_count = (latency_ns / line_time_us + 1000) / 1000;
@@ -1118,10 +1131,15 @@ static void i965_update_wm(struct drm_crtc *unused_crtc)
 		int clock = adjusted_mode->crtc_clock;
 		int htotal = adjusted_mode->crtc_htotal;
 		int hdisplay = to_intel_crtc(crtc)->config->pipe_src_w;
-		int pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+		int pixel_size;
 		unsigned long line_time_us;
 		int entries;
 
+		if (crtc->primary->state->fb)
+			pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+		else
+			pixel_size = 4;
+
 		line_time_us = max(htotal * 1000 / clock, 1);
 
 		/* Use ns/us then divide to preserve precision */
@@ -1195,7 +1213,13 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 	crtc = intel_get_crtc_for_plane(dev, 0);
 	if (intel_crtc_active(crtc)) {
 		const struct drm_display_mode *adjusted_mode;
-		int cpp = crtc->primary->state->fb->bits_per_pixel / 8;
+		int cpp;
+
+		if (crtc->primary->state->fb)
+			cpp = crtc->primary->state->fb->bits_per_pixel / 8;
+		else
+			cpp = 4;
+
 		if (IS_GEN2(dev))
 			cpp = 4;
 
@@ -1217,7 +1241,13 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 	crtc = intel_get_crtc_for_plane(dev, 1);
 	if (intel_crtc_active(crtc)) {
 		const struct drm_display_mode *adjusted_mode;
-		int cpp = crtc->primary->state->fb->bits_per_pixel / 8;
+		int cpp;
+
+		if (crtc->primary->state->fb)
+			cpp = crtc->primary->state->fb->bits_per_pixel / 8;
+		else
+			cpp = 4;
+
 		if (IS_GEN2(dev))
 			cpp = 4;
 
@@ -1243,7 +1273,7 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 		obj = intel_fb_obj(enabled->primary->state->fb);
 
 		/* self-refresh seems busted with untiled */
-		if (obj->tiling_mode == I915_TILING_NONE)
+		if (!obj || obj->tiling_mode == I915_TILING_NONE)
 			enabled = NULL;
 	}
 
@@ -1264,10 +1294,15 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 		int clock = adjusted_mode->crtc_clock;
 		int htotal = adjusted_mode->crtc_htotal;
 		int hdisplay = to_intel_crtc(enabled)->config->pipe_src_w;
-		int pixel_size = enabled->primary->state->fb->bits_per_pixel / 8;
+		int pixel_size;
 		unsigned long line_time_us;
 		int entries;
 
+		if (enabled->primary->state->fb)
+			pixel_size = enabled->primary->state->fb->bits_per_pixel / 8;
+		else
+			pixel_size = 4;
+
 		line_time_us = max(htotal * 1000 / clock, 1);
 
Quoted 4 lines

drivers/gpu/drm/i915/intel_pm.c static void i9xx_update_wm(struct drm_crtc *unused_crtc) · line 1308

Quoted 1 line
drivers/gpu/drm/i915/intel_pm.c +0 -0
 		/* Use ns/us then divide to preserve precision */

With the change to intel_crtc_active() to look at state->fb I think you could drop all of the changes above, and just keep the changes below.

Are you sure? If intel_crtc->active is true, but the primary plane is disabled (plane->state->fb == NULL), then I think we're still going to wind up trying to dereference plane->state->fb to get bits_per_pixel.

In my other branch I do have a patch that just moves all that wm_param calculation out of the watermark code here and sticks it in the check_plane code, so that we always have up-to-date enabled/bpp/etc values collected for the plane state. If I can extract that from my other branch cleanly, that might be a slightly cleaner solution than just adding all the fb tests here.

Matt

Quoted 93 lines
Quoted 89 lines
drivers/gpu/drm/i915/intel_pm.c +39 -23
@@ -1962,13 +1997,25 @@ static void ilk_compute_wm_parameters(struct drm_crtc *crtc,
 	p->active = true;
 	p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal;
 	p->pixel_rate = ilk_pipe_pixel_rate(dev, crtc);
-	p->pri.bytes_per_pixel = crtc->primary->state->fb->bits_per_pixel / 8;
-	p->cur.bytes_per_pixel = 4;
+
+	if (crtc->primary->state->fb) {
+		p->pri.enabled = true;
+		p->pri.bytes_per_pixel =
+			crtc->primary->state->fb->bits_per_pixel / 8;
+	} else {
+		p->pri.enabled = false;
+		p->pri.bytes_per_pixel = 0;
+	}
+
+	if (crtc->cursor->state->fb) {
+		p->cur.enabled = true;
+		p->cur.bytes_per_pixel = 4;
+	} else {
+		p->cur.enabled = false;
+		p->cur.bytes_per_pixel = 0;
+	}
 	p->pri.horiz_pixels = intel_crtc->config->pipe_src_w;
 	p->cur.horiz_pixels = intel_crtc->base.cursor->state->crtc_w;
-	/* TODO: for now, assume primary and cursor planes are always enabled. */
-	p->pri.enabled = true;
-	p->cur.enabled = true;
 
 	drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) {
 		struct intel_plane *intel_plane = to_intel_plane(plane);
@@ -2734,27 +2781,31 @@ static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc,
 		p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal;
 		p->pixel_rate = skl_pipe_pixel_rate(intel_crtc->config);
 
-		/*
-		 * For now, assume primary and cursor planes are always enabled.
-		 */
-		p->plane[0].enabled = true;
-		p->plane[0].bytes_per_pixel =
-			crtc->primary->state->fb->bits_per_pixel / 8;
-		p->plane[0].horiz_pixels = intel_crtc->config->pipe_src_w;
-		p->plane[0].vert_pixels = intel_crtc->config->pipe_src_h;
-		p->plane[0].tiling = DRM_FORMAT_MOD_NONE;
 		fb = crtc->primary->state->fb;
-		/*
-		 * Framebuffer can be NULL on plane disable, but it does not
-		 * matter for watermarks if we assume no tiling in that case.
-		 */
-		if (fb)
+		if (fb) {
+			p->plane[0].enabled = true;
+			p->plane[0].bytes_per_pixel = fb->bits_per_pixel / 8;
 			p->plane[0].tiling = fb->modifier[0];
+		} else {
+			p->plane[0].enabled = false;
+			p->plane[0].bytes_per_pixel = 0;
+			p->plane[0].tiling = DRM_FORMAT_MOD_NONE;
+		}
+		p->plane[0].horiz_pixels = intel_crtc->config->pipe_src_w;
+		p->plane[0].vert_pixels = intel_crtc->config->pipe_src_h;
 
-		p->cursor.enabled = true;
-		p->cursor.bytes_per_pixel = 4;
-		p->cursor.horiz_pixels = intel_crtc->base.cursor->state->crtc_w ?
-					 intel_crtc->base.cursor->state->crtc_w : 64;
+		fb = crtc->cursor->state->fb;
+		if (fb) {
+			p->cursor.enabled = true;
+			p->cursor.bytes_per_pixel = fb->bits_per_pixel / 8;
+			p->cursor.horiz_pixels = crtc->cursor->state->crtc_w;
+			p->cursor.vert_pixels = crtc->cursor->state->crtc_h;
+		} else {
+			p->cursor.enabled = false;
+			p->cursor.bytes_per_pixel = 0;
+			p->cursor.horiz_pixels = 64;
+			p->cursor.vert_pixels = 64;
+		}
 	}
 
 	list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 2 lines
Ville Syrjälä
Intel OTC
Signature · 9 lines
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#7 lore raw

Re: [PATCH 3/3] drm/i915: Don't assume primary & cursor are always on for wm calculation (v3)

Quoted 177 lines · Matt Roper
Quoted 176 lines · Ville Syrjälä
Quoted 175 lines · Matt Roper

Current ILK-style watermark code assumes the primary plane and cursor plane are always enabled. This assumption, along with the combination of two independent commits that got merged at the same time, results in a NULL dereference. The offending commits are:

        commit fd2d61341bf39d1054256c07d6eddd624ebc4241
        Author: Matt Roper <[email protected]>
        Date:   Fri Feb 27 10:12:01 2015 -0800

            drm/i915: Use plane->state->fb in watermark code (v2)

and

commit 0fda65680e92545caea5be7805a7f0a617fb6c20
Author: Tvrtko Ursulin <[email protected]>
Date: Fri Feb 27 15:12:35 2015 +0000

drm/i915/skl: Update watermarks for Y tiling

The first commit causes us to use the FB from plane->state->fb rather than the legacy plane->fb, which is updated a bit later in the process.

The second commit includes a change that now triggers watermark reprogramming on primary plane enable/disable where we didn't have one before (which wasn't really correct, but we had been getting lucky because we always calculated as if the primary plane was on).

Together, these two commits cause the watermark calculation to (properly) see plane->state->fb = NULL when we're in the process of disabling the primary plane. However the existing watermark code assumes there's always a primary fb and tries to dereference it to find out pixel format / bpp information.

The fix is to make ILK-style watermark calculation actually check the true status of primary & cursor planes and adjust our watermark logic accordingly.

v2: Update unchecked uses of state->fb for other platforms (pnv, skl,
etc.). Note that this is just a temporary fix. Ultimately the useful information is going to be computed at check time and stored right in the state structures so that we don't have to figure this all out while we're supposed to be programming the watermarks. (caught by Tvrtko)

v3: Fix a couple copy/paste mistakes in SKL code. (Tvrtko)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89388

---
 drivers/gpu/drm/i915/intel_pm.c | 113 +++++++++++++++++++++++++++++-----------
 1 file changed, 82 insertions(+), 31 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +43 -8
index a06a2c7..207c973 100644
@@ -608,12 +608,17 @@ static void pineview_update_wm(struct drm_crtc *unused_crtc)
 	crtc = single_enabled_crtc(dev);
 	if (crtc) {
 		const struct drm_display_mode *adjusted_mode;
-		int pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+		int pixel_size;
 		int clock;
 
 		adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode;
 		clock = adjusted_mode->crtc_clock;
 
+		if (crtc->primary->state->fb)
+			pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+		else
+			pixel_size = 4;
+
 		/* Display SR */
 		wm = intel_calculate_wm(clock, &pineview_display_wm,
 					pineview_display_wm.fifo_size,
@@ -684,7 +689,11 @@ static bool g4x_compute_wm0(struct drm_device *dev,
 	clock = adjusted_mode->crtc_clock;
 	htotal = adjusted_mode->crtc_htotal;
 	hdisplay = to_intel_crtc(crtc)->config->pipe_src_w;
-	pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+
+	if (crtc->primary->state->fb)
+		pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+	else
+		pixel_size = 4;
 
 	/* Use the small buffer method to calculate plane watermark */
 	entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
@@ -771,7 +780,11 @@ static bool g4x_compute_srwm(struct drm_device *dev,
 	clock = adjusted_mode->crtc_clock;
 	htotal = adjusted_mode->crtc_htotal;
 	hdisplay = to_intel_crtc(crtc)->config->pipe_src_w;
-	pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+
+	if (crtc->primary->state->fb)
+		pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+	else
+		pixel_size = 4;
 
 	line_time_us = max(htotal * 1000 / clock, 1);
 	line_count = (latency_ns / line_time_us + 1000) / 1000;
@@ -1118,10 +1131,15 @@ static void i965_update_wm(struct drm_crtc *unused_crtc)
 		int clock = adjusted_mode->crtc_clock;
 		int htotal = adjusted_mode->crtc_htotal;
 		int hdisplay = to_intel_crtc(crtc)->config->pipe_src_w;
-		int pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+		int pixel_size;
 		unsigned long line_time_us;
 		int entries;
 
+		if (crtc->primary->state->fb)
+			pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
+		else
+			pixel_size = 4;
+
 		line_time_us = max(htotal * 1000 / clock, 1);
 
 		/* Use ns/us then divide to preserve precision */
@@ -1195,7 +1213,13 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 	crtc = intel_get_crtc_for_plane(dev, 0);
 	if (intel_crtc_active(crtc)) {
 		const struct drm_display_mode *adjusted_mode;
-		int cpp = crtc->primary->state->fb->bits_per_pixel / 8;
+		int cpp;
+
+		if (crtc->primary->state->fb)
+			cpp = crtc->primary->state->fb->bits_per_pixel / 8;
+		else
+			cpp = 4;
+
 		if (IS_GEN2(dev))
 			cpp = 4;
 
@@ -1217,7 +1241,13 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 	crtc = intel_get_crtc_for_plane(dev, 1);
 	if (intel_crtc_active(crtc)) {
 		const struct drm_display_mode *adjusted_mode;
-		int cpp = crtc->primary->state->fb->bits_per_pixel / 8;
+		int cpp;
+
+		if (crtc->primary->state->fb)
+			cpp = crtc->primary->state->fb->bits_per_pixel / 8;
+		else
+			cpp = 4;
+
 		if (IS_GEN2(dev))
 			cpp = 4;
 
@@ -1243,7 +1273,7 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 		obj = intel_fb_obj(enabled->primary->state->fb);
 
 		/* self-refresh seems busted with untiled */
-		if (obj->tiling_mode == I915_TILING_NONE)
+		if (!obj || obj->tiling_mode == I915_TILING_NONE)
 			enabled = NULL;
 	}
 
@@ -1264,10 +1294,15 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 		int clock = adjusted_mode->crtc_clock;
 		int htotal = adjusted_mode->crtc_htotal;
 		int hdisplay = to_intel_crtc(enabled)->config->pipe_src_w;
-		int pixel_size = enabled->primary->state->fb->bits_per_pixel / 8;
+		int pixel_size;
 		unsigned long line_time_us;
 		int entries;
 
+		if (enabled->primary->state->fb)
+			pixel_size = enabled->primary->state->fb->bits_per_pixel / 8;
+		else
+			pixel_size = 4;
+
 		line_time_us = max(htotal * 1000 / clock, 1);
 
Quoted 8 lines
Quoted 4 lines

drivers/gpu/drm/i915/intel_pm.c static void i9xx_update_wm(struct drm_crtc *unused_crtc) · line 1308

Quoted 1 line
drivers/gpu/drm/i915/intel_pm.c +0 -0
 		/* Use ns/us then divide to preserve precision */

With the change to intel_crtc_active() to look at state->fb I think you could drop all of the changes above, and just keep the changes below.

Are you sure? If intel_crtc->active is true, but the primary plane is disabled (plane->state->fb == NULL), then I think we're still going to wind up trying to dereference plane->state->fb to get bits_per_pixel.

intel_crtc_active() will come out as false in that case and we never end up looking at the fb.

Quoted 7 lines

In my other branch I do have a patch that just moves all that wm_param calculation out of the watermark code here and sticks it in the check_plane code, so that we always have up-to-date enabled/bpp/etc values collected for the plane state. If I can extract that from my other branch cleanly, that might be a slightly cleaner solution than just adding all the fb tests here.

I don't think it's worth looking at the old platform code at this point. We just want the ilk+ stuff converted to atomic first. I suspect once I get the VLV/CHV wm code sorted into a better shape we can leverage it for the other gmch platforms as well.

Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#8 lore raw

PATCH 3/3 drm/i915: Don't assume primary & cursor are always on for wm calculation (v4)

Current ILK-style watermark code assumes the primary plane and cursor plane are always enabled. This assumption, along with the combination of two independent commits that got merged at the same time, results in a NULL dereference. The offending commits are:

        commit fd2d61341bf39d1054256c07d6eddd624ebc4241
        Author: Matt Roper <[email protected]>
        Date:   Fri Feb 27 10:12:01 2015 -0800

            drm/i915: Use plane->state->fb in watermark code (v2)

and

commit 0fda65680e92545caea5be7805a7f0a617fb6c20
Author: Tvrtko Ursulin <[email protected]>
Date: Fri Feb 27 15:12:35 2015 +0000

drm/i915/skl: Update watermarks for Y tiling

The first commit causes us to use the FB from plane->state->fb rather than the legacy plane->fb, which is updated a bit later in the process.

The second commit includes a change that now triggers watermark reprogramming on primary plane enable/disable where we didn't have one before (which wasn't really correct, but we had been getting lucky because we always calculated as if the primary plane was on).

Together, these two commits cause the watermark calculation to (properly) see plane->state->fb = NULL when we're in the process of disabling the primary plane. However the existing watermark code assumes there's always a primary fb and tries to dereference it to find out pixel format / bpp information.

The fix is to make ILK-style watermark calculation actually check the true status of primary & cursor planes and adjust our watermark logic accordingly.

v2: Update unchecked uses of state->fb for other platforms (pnv, skl,
etc.). Note that this is just a temporary fix. Ultimately the useful information is going to be computed at check time and stored right in the state structures so that we don't have to figure this all out while we're supposed to be programming the watermarks. (caught by Tvrtko)

v3: Fix a couple copy/paste mistakes in SKL code. (Tvrtko)

v4: Only add FB checks for ILK/SKL codepaths. Older platforms still use
intel_crtc_active() and will shortcircuit out of watermark calculations before ever trying to dereference the primary plane's framebuffer.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89388

---
 drivers/gpu/drm/i915/intel_pm.c | 62 ++++++++++++++++++++++++++---------------
 1 file changed, 39 insertions(+), 23 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +39 -23
index a06a2c7..7566cec 100644
@@ -1962,13 +1962,25 @@ static void ilk_compute_wm_parameters(struct drm_crtc *crtc,
 	p->active = true;
 	p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal;
 	p->pixel_rate = ilk_pipe_pixel_rate(dev, crtc);
-	p->pri.bytes_per_pixel = crtc->primary->state->fb->bits_per_pixel / 8;
-	p->cur.bytes_per_pixel = 4;
+
+	if (crtc->primary->state->fb) {
+		p->pri.enabled = true;
+		p->pri.bytes_per_pixel =
+			crtc->primary->state->fb->bits_per_pixel / 8;
+	} else {
+		p->pri.enabled = false;
+		p->pri.bytes_per_pixel = 0;
+	}
+
+	if (crtc->cursor->state->fb) {
+		p->cur.enabled = true;
+		p->cur.bytes_per_pixel = 4;
+	} else {
+		p->cur.enabled = false;
+		p->cur.bytes_per_pixel = 0;
+	}
 	p->pri.horiz_pixels = intel_crtc->config->pipe_src_w;
 	p->cur.horiz_pixels = intel_crtc->base.cursor->state->crtc_w;
-	/* TODO: for now, assume primary and cursor planes are always enabled. */
-	p->pri.enabled = true;
-	p->cur.enabled = true;
 
 	drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) {
 		struct intel_plane *intel_plane = to_intel_plane(plane);
@@ -2734,27 +2746,31 @@ static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc,
 		p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal;
 		p->pixel_rate = skl_pipe_pixel_rate(intel_crtc->config);
 
-		/*
-		 * For now, assume primary and cursor planes are always enabled.
-		 */
-		p->plane[0].enabled = true;
-		p->plane[0].bytes_per_pixel =
-			crtc->primary->state->fb->bits_per_pixel / 8;
-		p->plane[0].horiz_pixels = intel_crtc->config->pipe_src_w;
-		p->plane[0].vert_pixels = intel_crtc->config->pipe_src_h;
-		p->plane[0].tiling = DRM_FORMAT_MOD_NONE;
 		fb = crtc->primary->state->fb;
-		/*
-		 * Framebuffer can be NULL on plane disable, but it does not
-		 * matter for watermarks if we assume no tiling in that case.
-		 */
-		if (fb)
+		if (fb) {
+			p->plane[0].enabled = true;
+			p->plane[0].bytes_per_pixel = fb->bits_per_pixel / 8;
 			p->plane[0].tiling = fb->modifier[0];
+		} else {
+			p->plane[0].enabled = false;
+			p->plane[0].bytes_per_pixel = 0;
+			p->plane[0].tiling = DRM_FORMAT_MOD_NONE;
+		}
+		p->plane[0].horiz_pixels = intel_crtc->config->pipe_src_w;
+		p->plane[0].vert_pixels = intel_crtc->config->pipe_src_h;
 
-		p->cursor.enabled = true;
-		p->cursor.bytes_per_pixel = 4;
-		p->cursor.horiz_pixels = intel_crtc->base.cursor->state->crtc_w ?
-					 intel_crtc->base.cursor->state->crtc_w : 64;
+		fb = crtc->cursor->state->fb;
+		if (fb) {
+			p->cursor.enabled = true;
+			p->cursor.bytes_per_pixel = fb->bits_per_pixel / 8;
+			p->cursor.horiz_pixels = crtc->cursor->state->crtc_w;
+			p->cursor.vert_pixels = crtc->cursor->state->crtc_h;
+		} else {
+			p->cursor.enabled = false;
+			p->cursor.bytes_per_pixel = 0;
+			p->cursor.horiz_pixels = 64;
+			p->cursor.vert_pixels = 64;
+		}
 	}
 
 	list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 3/3
#9 lore raw

Re: [PATCH 3/3] drm/i915: Don't assume primary & cursor are always on for wm calculation (v4)

Quoted 135 lines · Matt Roper

Current ILK-style watermark code assumes the primary plane and cursor plane are always enabled. This assumption, along with the combination of two independent commits that got merged at the same time, results in a NULL dereference. The offending commits are:

         commit fd2d61341bf39d1054256c07d6eddd624ebc4241
         Author: Matt Roper <[email protected]>
         Date:   Fri Feb 27 10:12:01 2015 -0800

             drm/i915: Use plane->state->fb in watermark code (v2)

and

commit 0fda65680e92545caea5be7805a7f0a617fb6c20
Author: Tvrtko Ursulin <[email protected]>
Date: Fri Feb 27 15:12:35 2015 +0000

drm/i915/skl: Update watermarks for Y tiling

The first commit causes us to use the FB from plane->state->fb rather than the legacy plane->fb, which is updated a bit later in the process.

The second commit includes a change that now triggers watermark reprogramming on primary plane enable/disable where we didn't have one before (which wasn't really correct, but we had been getting lucky because we always calculated as if the primary plane was on).

Together, these two commits cause the watermark calculation to (properly) see plane->state->fb = NULL when we're in the process of disabling the primary plane. However the existing watermark code assumes there's always a primary fb and tries to dereference it to find out pixel format / bpp information.

The fix is to make ILK-style watermark calculation actually check the true status of primary & cursor planes and adjust our watermark logic accordingly.

v2: Update unchecked uses of state->fb for other platforms (pnv, skl,
etc.). Note that this is just a temporary fix. Ultimately the useful information is going to be computed at check time and stored right in the state structures so that we don't have to figure this all out while we're supposed to be programming the watermarks. (caught by Tvrtko)

v3: Fix a couple copy/paste mistakes in SKL code. (Tvrtko)

v4: Only add FB checks for ILK/SKL codepaths. Older platforms still use
intel_crtc_active() and will shortcircuit out of watermark calculations before ever trying to dereference the primary plane's framebuffer.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89388

---
  drivers/gpu/drm/i915/intel_pm.c | 62 ++++++++++++++++++++++++++---------------
  1 file changed, 39 insertions(+), 23 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +32 -23
index a06a2c7..7566cec 100644
@@ -1962,13 +1962,25 @@ static void ilk_compute_wm_parameters(struct drm_crtc *crtc,
  	p->active = true;
  	p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal;
  	p->pixel_rate = ilk_pipe_pixel_rate(dev, crtc);
-	p->pri.bytes_per_pixel = crtc->primary->state->fb->bits_per_pixel / 8;
-	p->cur.bytes_per_pixel = 4;
+
+	if (crtc->primary->state->fb) {
+		p->pri.enabled = true;
+		p->pri.bytes_per_pixel =
+			crtc->primary->state->fb->bits_per_pixel / 8;
+	} else {
+		p->pri.enabled = false;
+		p->pri.bytes_per_pixel = 0;
+	}
+
+	if (crtc->cursor->state->fb) {
+		p->cur.enabled = true;
+		p->cur.bytes_per_pixel = 4;
+	} else {
+		p->cur.enabled = false;
+		p->cur.bytes_per_pixel = 0;
+	}
  	p->pri.horiz_pixels = intel_crtc->config->pipe_src_w;
  	p->cur.horiz_pixels = intel_crtc->base.cursor->state->crtc_w;
-	/* TODO: for now, assume primary and cursor planes are always enabled. */
-	p->pri.enabled = true;
-	p->cur.enabled = true;
 
  	drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) {
  		struct intel_plane *intel_plane = to_intel_plane(plane);
@@ -2734,27 +2746,31 @@ static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc,
  		p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal;
  		p->pixel_rate = skl_pipe_pixel_rate(intel_crtc->config);
 
-		/*
-		 * For now, assume primary and cursor planes are always enabled.
-		 */
-		p->plane[0].enabled = true;
-		p->plane[0].bytes_per_pixel =
-			crtc->primary->state->fb->bits_per_pixel / 8;
-		p->plane[0].horiz_pixels = intel_crtc->config->pipe_src_w;
-		p->plane[0].vert_pixels = intel_crtc->config->pipe_src_h;
-		p->plane[0].tiling = DRM_FORMAT_MOD_NONE;
  		fb = crtc->primary->state->fb;
-		/*
-		 * Framebuffer can be NULL on plane disable, but it does not
-		 * matter for watermarks if we assume no tiling in that case.
-		 */
-		if (fb)
+		if (fb) {
+			p->plane[0].enabled = true;
+			p->plane[0].bytes_per_pixel = fb->bits_per_pixel / 8;
  			p->plane[0].tiling = fb->modifier[0];
+		} else {
+			p->plane[0].enabled = false;
+			p->plane[0].bytes_per_pixel = 0;
+			p->plane[0].tiling = DRM_FORMAT_MOD_NONE;
+		}
+		p->plane[0].horiz_pixels = intel_crtc->config->pipe_src_w;
+		p->plane[0].vert_pixels = intel_crtc->config->pipe_src_h;
 
-		p->cursor.enabled = true;
-		p->cursor.bytes_per_pixel = 4;
-		p->cursor.horiz_pixels = intel_crtc->base.cursor->state->crtc_w ?
-					 intel_crtc->base.cursor->state->crtc_w : 64;
+		fb = crtc->cursor->state->fb;
+		if (fb) {
+			p->cursor.enabled = true;
+			p->cursor.bytes_per_pixel = fb->bits_per_pixel / 8;
+			p->cursor.horiz_pixels = crtc->cursor->state->crtc_w;

drivers/gpu/drm/i915/intel_pm.c static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc, · line 2776

Quoted 10 lines
drivers/gpu/drm/i915/intel_pm.c +7 -0
+			p->cursor.vert_pixels = crtc->cursor->state->crtc_h;
+		} else {
+			p->cursor.enabled = false;
+			p->cursor.bytes_per_pixel = 0;
+			p->cursor.horiz_pixels = 64;
+			p->cursor.vert_pixels = 64;
+		}
  	}
 
  	list_for_each_entry(plane, &dev->mode_config.plane_list, head) {

I was nervous about a new possibility of bytes_per_pixel being zero so looked if someone could divide by it. ilk_wm_fbc can, but is gated by pri.enabled so that is fine and I didn't find any other similar places.

Given that, it looks fine to me.

Regards,

Tvrtko
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

#10 lore raw

Re: [PATCH 3/3] drm/i915: Don't assume primary & cursor are always on for wm calculation (v4)

Quoted 152 lines · Tvrtko Ursulin
Quoted 135 lines · Matt Roper

Current ILK-style watermark code assumes the primary plane and cursor plane are always enabled. This assumption, along with the combination of two independent commits that got merged at the same time, results in a NULL dereference. The offending commits are:

        commit fd2d61341bf39d1054256c07d6eddd624ebc4241
        Author: Matt Roper <[email protected]>
        Date:   Fri Feb 27 10:12:01 2015 -0800

            drm/i915: Use plane->state->fb in watermark code (v2)

and

commit 0fda65680e92545caea5be7805a7f0a617fb6c20
Author: Tvrtko Ursulin <[email protected]>
Date: Fri Feb 27 15:12:35 2015 +0000

drm/i915/skl: Update watermarks for Y tiling

The first commit causes us to use the FB from plane->state->fb rather than the legacy plane->fb, which is updated a bit later in the process.

The second commit includes a change that now triggers watermark reprogramming on primary plane enable/disable where we didn't have one before (which wasn't really correct, but we had been getting lucky because we always calculated as if the primary plane was on).

Together, these two commits cause the watermark calculation to (properly) see plane->state->fb = NULL when we're in the process of disabling the primary plane. However the existing watermark code assumes there's always a primary fb and tries to dereference it to find out pixel format / bpp information.

The fix is to make ILK-style watermark calculation actually check the true status of primary & cursor planes and adjust our watermark logic accordingly.

v2: Update unchecked uses of state->fb for other platforms (pnv, skl,
etc.). Note that this is just a temporary fix. Ultimately the useful information is going to be computed at check time and stored right in the state structures so that we don't have to figure this all out while we're supposed to be programming the watermarks. (caught by Tvrtko)

v3: Fix a couple copy/paste mistakes in SKL code. (Tvrtko)

v4: Only add FB checks for ILK/SKL codepaths. Older platforms still use
intel_crtc_active() and will shortcircuit out of watermark calculations before ever trying to dereference the primary plane's framebuffer.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89388

---
 drivers/gpu/drm/i915/intel_pm.c | 62 ++++++++++++++++++++++++++---------------
 1 file changed, 39 insertions(+), 23 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +32 -23
index a06a2c7..7566cec 100644
@@ -1962,13 +1962,25 @@ static void ilk_compute_wm_parameters(struct drm_crtc *crtc,
 	p->active = true;
 	p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal;
 	p->pixel_rate = ilk_pipe_pixel_rate(dev, crtc);
-	p->pri.bytes_per_pixel = crtc->primary->state->fb->bits_per_pixel / 8;
-	p->cur.bytes_per_pixel = 4;
+
+	if (crtc->primary->state->fb) {
+		p->pri.enabled = true;
+		p->pri.bytes_per_pixel =
+			crtc->primary->state->fb->bits_per_pixel / 8;
+	} else {
+		p->pri.enabled = false;
+		p->pri.bytes_per_pixel = 0;
+	}
+
+	if (crtc->cursor->state->fb) {
+		p->cur.enabled = true;
+		p->cur.bytes_per_pixel = 4;
+	} else {
+		p->cur.enabled = false;
+		p->cur.bytes_per_pixel = 0;
+	}
 	p->pri.horiz_pixels = intel_crtc->config->pipe_src_w;
 	p->cur.horiz_pixels = intel_crtc->base.cursor->state->crtc_w;
-	/* TODO: for now, assume primary and cursor planes are always enabled. */
-	p->pri.enabled = true;
-	p->cur.enabled = true;
 
 	drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) {
 		struct intel_plane *intel_plane = to_intel_plane(plane);
@@ -2734,27 +2746,31 @@ static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc,
 		p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal;
 		p->pixel_rate = skl_pipe_pixel_rate(intel_crtc->config);
 
-		/*
-		 * For now, assume primary and cursor planes are always enabled.
-		 */
-		p->plane[0].enabled = true;
-		p->plane[0].bytes_per_pixel =
-			crtc->primary->state->fb->bits_per_pixel / 8;
-		p->plane[0].horiz_pixels = intel_crtc->config->pipe_src_w;
-		p->plane[0].vert_pixels = intel_crtc->config->pipe_src_h;
-		p->plane[0].tiling = DRM_FORMAT_MOD_NONE;
 		fb = crtc->primary->state->fb;
-		/*
-		 * Framebuffer can be NULL on plane disable, but it does not
-		 * matter for watermarks if we assume no tiling in that case.
-		 */
-		if (fb)
+		if (fb) {
+			p->plane[0].enabled = true;
+			p->plane[0].bytes_per_pixel = fb->bits_per_pixel / 8;
 			p->plane[0].tiling = fb->modifier[0];
+		} else {
+			p->plane[0].enabled = false;
+			p->plane[0].bytes_per_pixel = 0;
+			p->plane[0].tiling = DRM_FORMAT_MOD_NONE;
+		}
+		p->plane[0].horiz_pixels = intel_crtc->config->pipe_src_w;
+		p->plane[0].vert_pixels = intel_crtc->config->pipe_src_h;
 
-		p->cursor.enabled = true;
-		p->cursor.bytes_per_pixel = 4;
-		p->cursor.horiz_pixels = intel_crtc->base.cursor->state->crtc_w ?
-					 intel_crtc->base.cursor->state->crtc_w : 64;
+		fb = crtc->cursor->state->fb;
+		if (fb) {
+			p->cursor.enabled = true;
+			p->cursor.bytes_per_pixel = fb->bits_per_pixel / 8;
+			p->cursor.horiz_pixels = crtc->cursor->state->crtc_w;

drivers/gpu/drm/i915/intel_pm.c static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc, · line 2776

Quoted 10 lines
drivers/gpu/drm/i915/intel_pm.c +7 -0
+			p->cursor.vert_pixels = crtc->cursor->state->crtc_h;
+		} else {
+			p->cursor.enabled = false;
+			p->cursor.bytes_per_pixel = 0;
+			p->cursor.horiz_pixels = 64;
+			p->cursor.vert_pixels = 64;
+		}
 	}
 
 	list_for_each_entry(plane, &dev->mode_config.plane_list, head) {

I was nervous about a new possibility of bytes_per_pixel being zero so looked if someone could divide by it. ilk_wm_fbc can, but is gated by pri.enabled so that is fine and I didn't find any other similar places.

Quoted 3 lines

Given that, it looks fine to me.

Queued for -next, thanks for the patch.
-Daniel

Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tested-by on v1 3/3
#11 lore raw

Re: [PATCH 3/3] drm/i915: Don't assume primary & cursor are always on for wm calculation (v3)

In reply to Matt Roper

Task id: 5919 -------------------------------------Summary-------------------------------------
Platform Delta drm-intel-nightly Series Applied

PNV                                  282/282              282/282
ILK                                  308/308              308/308
SNB                                  307/307              307/307
IVB                                  375/375              375/375
BYT                                  294/294              294/294

HSW -1 385/385 384/385
BDW 315/315 315/315
-------------------------------------Detailed-------------------------------------
Platform Test drm-intel-nightly Series Applied
*HSW igt_gem_storedw_batches_loop_normal PASS(4) DMESG_WARN(1)PASS(1)
Note: You need to pay more attention to line start with '*'
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx