Skip to contentSkip to conversation

Few omap2plus_defconfig updates

PATCH New Tony Lindgren 2 participants 6 messages Mar 16, 2015 – Mar 17, 2015

Subsystems (2)
Arm (32-bit) OMAP2+ support
lore
Share & tools
lore

Tony Lindgren

author maintainer
#0 lore raw

cover Few omap2plus_defconfig updates

Hi all,

Here are few minor updates to add support for things as loadable modules to omap2plus_defconfig for a few devices I noticed we are not enabling by default.

Regards,

Tony

Tony Lindgren (3):
ARM: omap2plus_defconfig: Enable leds-pwm
ARM: omap2plus_defconfig: Update bluetooth options
ARM: omap2plus_defconfig: Enable n900 modem as loadable modules

 arch/arm/configs/omap2plus_defconfig | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
Signature · 1 line
2.1.4
author maintainer
#1 lore raw

PATCH 1/3 ARM: omap2plus_defconfig: Enable leds-pwm

This is used on many omap boards.

Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/configs/omap2plus_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/omap2plus_defconfig +1 -0
index 4e3e93d..df41f2c 100644
@@ -348,6 +348,7 @@ CONFIG_MMC_OMAP_HS=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
 CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_PWM=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_ONESHOT=m
Signature · 1 line
2.1.4
author maintainer
#2 lore raw

PATCH 2/3 ARM: omap2plus_defconfig: Update bluetooth options

In reply to Tony Lindgren

Many omaps have bluetooth, so let's make it available as modules.

Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/configs/omap2plus_defconfig | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
arch/arm/configs/omap2plus_defconfig +15 -0
index df41f2c..6c7722d 100644
@@ -91,13 +91,28 @@ CONFIG_CAN=m
 CONFIG_CAN_C_CAN=m
 CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
 CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_3WIRE=y
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_CFG80211=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_AF_RXRPC=m
+CONFIG_RXKAD=m
 CONFIG_MAC80211=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
Signature · 1 line
2.1.4
author maintainer
#3 lore raw

PATCH 3/3 ARM: omap2plus_defconfig: Enable n900 modem as loadable modules

In reply to Tony Lindgren

Enable n900 modem as loadable modules.

Cc Sebastian Reichel <[email protected]>
Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/configs/omap2plus_defconfig | 10 ++++++++++
 1 file changed, 10 insertions(+)
arch/arm/configs/omap2plus_defconfig +10 -0
index 6c7722d..cd1c0f3 100644
@@ -87,6 +87,7 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_LRO is not set
 CONFIG_NETFILTER=y
+CONFIG_PHONET=m
 CONFIG_CAN=m
 CONFIG_CAN_C_CAN=m
 CONFIG_CAN_C_CAN_PLATFORM=m

@@ -178,6 +179,7 @@ CONFIG_USB_EPSON2888=y
 CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_KC2190=y
+CONFIG_USB_CDC_PHONET=m
 CONFIG_LIBERTAS=m
 CONFIG_LIBERTAS_USB=m
 CONFIG_LIBERTAS_SDIO=m

@@ -224,6 +226,11 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
 CONFIG_SPI_OMAP24XX=y
 CONFIG_SPI_TI_QSPI=m
+CONFIG_HSI=m
+CONFIG_OMAP_SSI=m
+CONFIG_NOKIA_MODEM=m
+CONFIG_SSI_PROTOCOL=m
+CONFIG_HSI_CHAR=m
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y

@@ -348,6 +355,7 @@ CONFIG_USB_CONFIGFS_ECM=y
 CONFIG_USB_CONFIGFS_ECM_SUBSET=y
 CONFIG_USB_CONFIGFS_RNDIS=y
 CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_PHONET=y
 CONFIG_USB_CONFIGFS_MASS_STORAGE=y
 CONFIG_USB_CONFIGFS_F_LB_SS=y
 CONFIG_USB_CONFIGFS_F_FS=y

@@ -356,6 +364,7 @@ CONFIG_USB_CONFIGFS_F_UAC2=y
 CONFIG_USB_CONFIGFS_F_MIDI=y
 CONFIG_USB_CONFIGFS_F_HID=y
 CONFIG_USB_ZERO=m
+CONFIG_USB_G_NOKIA=m
 CONFIG_MMC=y
 CONFIG_SDIO_UART=y
 CONFIG_MMC_OMAP=y

@@ -405,6 +414,7 @@ CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
Signature · 1 line
2.1.4
#4 lore raw

PATCH 3/3 ARM: omap2plus_defconfig: Enable n900 modem as loadable modules

Hi Tony,

Quoted 1 line · Tony Lindgren

Enable n900 modem as loadable modules.

Acked-by Sebastian Reichel <[email protected]>
Quoted 3 lines

[...]
+CONFIG_HSI_CHAR=m
[...]

I think this one should be disabled by default. It's only needed by very few people (it exposes the hsi bus to userspace, like i2c-dev driver does for i2c).

-- Sebastian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150317/28121816/attachment-0001.sig>

author maintainer
#5 lore raw

PATCH 3/3 ARM: omap2plus_defconfig: Enable n900 modem as loadable modules

Quoted 7 lines · Sebastian Reichel

Hi Tony,

Quoted 1 line · Tony Lindgren

Enable n900 modem as loadable modules.

Acked-by Sebastian Reichel <[email protected]>
Quoted 7 lines
Quoted 3 lines

[...]
+CONFIG_HSI_CHAR=m
[...]

I think this one should be disabled by default. It's only needed by very few people (it exposes the hsi bus to userspace, like i2c-dev driver does for i2c).

OK will disable thanks.

Tony