Skip to contentSkip to conversation

drivers: hwspinlock: add CSR atlas7 implementation

PATCH RESEND Superseded Barry Song 2 participants 3 messages Mar 25, 2015 – May 7, 2015

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Barry Song

author
#0 lore raw

PATCH RESEND v2 1/1 drivers: hwspinlock: add CSR atlas7 implementation

From: Wei Chen <[email protected]>

Add hwspinlock support for the CSR atlas7 SoC.

The Hardware Spinlock device on atlas7 provides hardware assistance for synchronization between the multiple processors in the system (dual Cortex-A7, CAN bus Cortex-M3 and audio DSP).

---
 .../bindings/hwspinlock/sirf,hwspinlock.txt        |  18 +++
 drivers/hwspinlock/Kconfig                         |  12 ++
 drivers/hwspinlock/Makefile                        |   1 +
 drivers/hwspinlock/sirf_hwspinlock.c               | 151 +++++++++++++++++++++
 4 files changed, 182 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwspinlock/sirf,hwspinlock.txt
 create mode 100644 drivers/hwspinlock/sirf_hwspinlock.c
Documentation/devicetree/bindings/hwspinlock/sirf,hwspinlock.txt new file +18 -0
new file mode 100644
index 0000000..b22c492
@@ -0,0 +1,18 @@
+SIRF Hardware spinlock device Binding
+-----------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+	"sirf,hwspinlock"
+
+- reg : the register address of hwspinlock
+
+- num-spinlocks : how many spinlocks this device provides
+
+Example:
+	hwspinlock {
+		compatible = "sirf,hwspinlock";
+		reg = <0x13240000 0x00010000>;
+
+		num-spinlocks = <30>;
+	};
drivers/hwspinlock/Kconfig +12 -0
index 3612cb5..fc400e4 100644
@@ -29,4 +29,16 @@ config HSEM_U8500
 
 	  If unsure, say N.
 
+config HWSPINLOCK_SIRF
+	tristate "SIRF Hardware Spinlock device"
+	depends on ARCH_SIRF
+	select HWSPINLOCK
+	help
+	  Say y here to support the SIRF Hardware Spinlock device, which
+	  provides a synchronisation mechanism for the various processor
+	  on the SoC.
+
+	  It's safe to say n here if you're not interested in SIRF hardware
+	  spinlock or just want a bare minimum kernel.
+
 endmenu
drivers/hwspinlock/Makefile +1 -0
index 93eb64b..472b82d 100644
@@ -5,3 +5,4 @@
 obj-$(CONFIG_HWSPINLOCK)		+= hwspinlock_core.o
 obj-$(CONFIG_HWSPINLOCK_OMAP)		+= omap_hwspinlock.o
 obj-$(CONFIG_HSEM_U8500)		+= u8500_hsem.o
+obj-$(CONFIG_HWSPINLOCK_SIRF)		+= sirf_hwspinlock.o
drivers/hwspinlock/sirf_hwspinlock.c new file +151 -0

151 lines not on this page · raw message

Signature · 6 lines
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#1 lore raw
Quoted 4 lines · Barry Song

From: Wei Chen <[email protected]>

Add hwspinlock support for the CSR atlas7 SoC.

[..]

Quoted 7 lines
Documentation/devicetree/bindings/hwspinlock/sirf,hwspinlock.txt new file +0 -0
new file mode 100644
index 0000000..b22c492

Documentation/devicetree/bindings/hwspinlock/sirf,hwspinlock.txt line 10

Quoted 10 lines
Documentation/devicetree/bindings/hwspinlock/sirf,hwspinlock.txt new file +10 -0
@@ -0,0 +1,18 @@
+SIRF Hardware spinlock device Binding
+-----------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+       "sirf,hwspinlock"
+
+- reg : the register address of hwspinlock
+
+- num-spinlocks : how many spinlocks this device provides

Why is number of spinlocks dynamic?

If you need to keep this it should have the "sirf," prefix.

You should either make a reference to the hwlock.txt pointing out the required "#hwlock-cells" property, or simply include it here.

Documentation/devicetree/bindings/hwspinlock/sirf,hwspinlock.txt line 17

Quoted 7 lines
Documentation/devicetree/bindings/hwspinlock/sirf,hwspinlock.txt new file +7 -0
+
+Example:
+       hwspinlock {
+               compatible = "sirf,hwspinlock";
+               reg = <0x13240000 0x00010000>;
+
+               num-spinlocks = <30>;

Does the hardware really have 30 locks?

The reason for my question is that we had a similar discussion regarding this property for the Qualcomm driver, in which I ended up dropping the property because I wanted the dt binding to describe the actual hardware and not the limited amount stated in some software design document.

The example is missing #hwlock-cells = <1>;

drivers/hwspinlock/Kconfig config HSEM_U8500 · line 32

Quoted 10 lines
Documentation/devicetree/bindings/hwspinlock/sirf,hwspinlock.txt new file +1 -0
+       };
drivers/hwspinlock/Kconfig +1 -0
index 3612cb5..fc400e4 100644
@@ -29,4 +29,16 @@ config HSEM_U8500
 
          If unsure, say N.
 
+config HWSPINLOCK_SIRF

I would appreciate if you put this above HSEM_U8500 to keep the list somewhat sorted.

drivers/hwspinlock/Kconfig config HSEM_U8500 · line 38

Quoted 6 lines
drivers/hwspinlock/Kconfig +6 -0
+       tristate "SIRF Hardware Spinlock device"
+       depends on ARCH_SIRF
+       select HWSPINLOCK
+       help
+         Say y here to support the SIRF Hardware Spinlock device, which
+         provides a synchronisation mechanism for the various processor

s/processor/processors

Quoted 11 lines
drivers/hwspinlock/Kconfig +5 -0
+         on the SoC.
+
+         It's safe to say n here if you're not interested in SIRF hardware
+         spinlock or just want a bare minimum kernel.
+
 endmenu
drivers/hwspinlock/Makefile +0 -0
index 93eb64b..472b82d 100644

drivers/hwspinlock/Makefile line 8

Quoted 4 lines
drivers/hwspinlock/Makefile +1 -0
@@ -5,3 +5,4 @@
 obj-$(CONFIG_HWSPINLOCK)               += hwspinlock_core.o
 obj-$(CONFIG_HWSPINLOCK_OMAP)          += omap_hwspinlock.o
 obj-$(CONFIG_HSEM_U8500)               += u8500_hsem.o
+obj-$(CONFIG_HWSPINLOCK_SIRF)          += sirf_hwspinlock.o

Please keep sort order here as well.

Quoted 48 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +42 -0
new file mode 100644
index 0000000..b68722a
@@ -0,0 +1,151 @@
+/*
+ * SIRF hardware spinlock driver
+ *
+ * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/hwspinlock.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "hwspinlock_internal.h"
+
+struct sirf_hwspinlock {
+       void __iomem *io_base;
+       struct hwspinlock_device bank;
+};
+
+/* Hardware spinlock register offsets */
+#define HW_SPINLOCK_RD_DEBUG   0x400
+#define HW_SPINLOCK_BASE       0x404
+#define HW_SPINLOCK_OFFSET(x)  (HW_SPINLOCK_BASE + 0x4 * (x))
+
+/* Possible values of HW_SPINLOCK_REG */
+#define HW_SPINLOCK_LOCKED     0
+#define HW_SPINLOCK_FREE       1
+
+static int sirf_hwspinlock_trylock(struct hwspinlock *lock)
+{
+       void __iomem *lock_addr = lock->priv;
+

drivers/hwspinlock/sirf_hwspinlock.c line 52

Quoted 10 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +10 -0
+       /* attempt to acquire the lock by reading its value */
+       return (HW_SPINLOCK_FREE == readl(lock_addr));
+}
+
+static void sirf_hwspinlock_unlock(struct hwspinlock *lock)
+{
+       void __iomem *lock_addr = lock->priv;
+
+       /* release the lock by writing 0 to it */
+       writel(HW_SPINLOCK_LOCKED, lock_addr);

This looks really wierd, but I assume the naming of the value is in line with hardware documentation(?)

Instead of having the somewhat confusing names you could replace the constants with just:
return !!readl(lock_addr);
and
writel(0, lock_addr);

If nothing else because you have the comments there as well...

Quoted 12 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +12 -0
+}
+
+static void sirf_hwspinlock_relax(struct hwspinlock *lock)
+{
+       ndelay(50);
+}
+
+static const struct hwspinlock_ops sirf_hwspinlock_ops = {
+       .trylock = sirf_hwspinlock_trylock,
+       .unlock = sirf_hwspinlock_unlock,
+       .relax = sirf_hwspinlock_relax,
+};

drivers/hwspinlock/sirf_hwspinlock.c line 74

Quoted 10 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +10 -0
+
+static int sirf_hwspinlock_probe(struct platform_device *pdev)
+{
+       struct sirf_hwspinlock *hwspin;
+       struct hwspinlock *hwlock;
+       u32 num_of_locks;
+       int idx, ret;
+
+       ret = of_property_read_u32(pdev->dev.of_node,
+                       "num-spinlocks", &num_of_locks);

As above; if you need this the property should have a "sirf," prefix.

drivers/hwspinlock/sirf_hwspinlock.c line 77

Quoted 3 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +3 -0
+       if (ret) {
+               dev_err(&pdev->dev,
+                       "Unable to find hwspinlock number. ret=%d\n", ret);

No need to print the error code here.

drivers/hwspinlock/sirf_hwspinlock.c line 89

Quoted 12 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +12 -0
+               return -ENODEV;
+       }
+
+       hwspin = devm_kzalloc(&pdev->dev, sizeof(*hwspin) +
+                       sizeof(*hwlock) * num_of_locks, GFP_KERNEL);
+       if (!hwspin)
+               return -ENOMEM;
+
+       /* retrieve io base */
+       hwspin->io_base = of_iomap(pdev->dev.of_node, 0);
+       if (!hwspin->io_base)
+               ret = -ENOMEM;

By using something like the following you can use devres for the ioremap.

res = platform_get_resource(pdev, IORESOURCE_MEM, 0); hwspin->io_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hwspin->io_base))
return PTR_ERR(hwspin->io_base);

Quoted 23 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +23 -0
+
+       for (idx = 0; idx < num_of_locks; idx++) {
+               hwlock = &hwspin->bank.lock[idx];
+               hwlock->priv = hwspin->io_base + HW_SPINLOCK_OFFSET(idx);
+       }
+
+       platform_set_drvdata(pdev, hwspin);
+
+       pm_runtime_enable(&pdev->dev);
+
+       ret = hwspin_lock_register(&hwspin->bank, &pdev->dev,
+                               &sirf_hwspinlock_ops, 0, num_of_locks);
+       if (ret)
+               goto reg_failed;
+
+       return 0;
+
+reg_failed:
+       pm_runtime_disable(&pdev->dev);
+       iounmap(hwspin->io_base);
+
+       return ret;
+}

drivers/hwspinlock/sirf_hwspinlock.c line 122

Quoted 10 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +10 -0
+
+static int sirf_hwspinlock_remove(struct platform_device *pdev)
+{
+       struct sirf_hwspinlock *hwspin = platform_get_drvdata(pdev);
+       int ret;
+
+       ret = hwspin_lock_unregister(&hwspin->bank);
+       if (ret) {
+               dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
+               return ret;

Even if you return an error here the device will still be torn down.

Quoted 19 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +19 -0
+       }
+
+       pm_runtime_disable(&pdev->dev);
+
+       iounmap(hwspin->io_base);
+
+       return 0;
+}
+
+static const struct of_device_id sirf_hwpinlock_ids[] = {
+       { .compatible = "sirf,hwspinlock", },
+       {},
+};
+MODULE_DEVICE_TABLE(of, sirf_hwpinlock_ids);
+
+static struct platform_driver sirf_hwspinlock_driver = {
+       .probe = sirf_hwspinlock_probe,
+       .remove = sirf_hwspinlock_remove,
+       .driver = {

drivers/hwspinlock/sirf_hwspinlock.c

Quoted 10 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +10 -0
+               .name = "atlas7_hwspinlock",
+               .of_match_table = of_match_ptr(sirf_hwpinlock_ids),
+       },
+};
+
+module_platform_driver(sirf_hwspinlock_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("SIRF Hardware spinlock driver");
+MODULE_AUTHOR("Wei Chen <[email protected]>");

Part of these details I think the patch looks good.

Regards,
Bjorn

author
#2 lore raw

2015-05-07 2:13 GMT+08:00 Bjorn Andersson <bjorn-UYDU3/[email protected]>:

Quoted 26 lines · Barry Song
Quoted 4 lines

From: Wei Chen <[email protected]>

Add hwspinlock support for the CSR atlas7 SoC.

[..]

Quoted 7 lines
Documentation/devicetree/bindings/hwspinlock/sirf,hwspinlock.txt new file +0 -0
new file mode 100644
index 0000000..b22c492

Documentation/devicetree/bindings/hwspinlock/sirf,hwspinlock.txt line 10

Quoted 10 lines
Documentation/devicetree/bindings/hwspinlock/sirf,hwspinlock.txt new file +10 -0
@@ -0,0 +1,18 @@
+SIRF Hardware spinlock device Binding
+-----------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+       "sirf,hwspinlock"
+
+- reg : the register address of hwspinlock
+
+- num-spinlocks : how many spinlocks this device provides

Why is number of spinlocks dynamic?

Quoted 1 line

If you need to keep this it should have the "sirf," prefix.

we would like to move it a MARCO in drivers directly just like other spinlock drivers.

Quoted 4 lines

You should either make a reference to the hwlock.txt pointing out the required "#hwlock-cells" property, or simply include it here.

yes. this has been discussed in another thread and Suman posted same comments.

Quoted 10 lines

Documentation/devicetree/bindings/hwspinlock/sirf,hwspinlock.txt line 17

Quoted 8 lines
Documentation/devicetree/bindings/hwspinlock/sirf,hwspinlock.txt new file +7 -0
+
+Example:
+       hwspinlock {
+               compatible = "sirf,hwspinlock";
+               reg = <0x13240000 0x00010000>;
+
+               num-spinlocks = <30>;

Does the hardware really have 30 locks?

yes.

Quoted 7 lines

The reason for my question is that we had a similar discussion regarding this property for the Qualcomm driver, in which I ended up dropping the property because I wanted the dt binding to describe the actual hardware and not the limited amount stated in some software design document.

the channel number should be HW? not SW?

Quoted 10 lines

The example is missing #hwlock-cells = <1>;

Quoted 7 lines
Documentation/devicetree/bindings/hwspinlock/sirf,hwspinlock.txt new file +1 -0
+       };
drivers/hwspinlock/Kconfig +0 -0
index 3612cb5..fc400e4 100644
@@ -29,4 +29,16 @@ config HSEM_U8500
 
Quoted 7 lines

drivers/hwspinlock/Kconfig config HSEM_U8500 · line 32

Quoted 3 lines
drivers/hwspinlock/Kconfig +1 -0
          If unsure, say N.
 
+config HWSPINLOCK_SIRF

I would appreciate if you put this above HSEM_U8500 to keep the list somewhat sorted.

looks fine.

Quoted 18 lines

drivers/hwspinlock/Kconfig config HSEM_U8500 · line 38

Quoted 6 lines
drivers/hwspinlock/Kconfig +6 -0
+       tristate "SIRF Hardware Spinlock device"
+       depends on ARCH_SIRF
+       select HWSPINLOCK
+       help
+         Say y here to support the SIRF Hardware Spinlock device, which
+         provides a synchronisation mechanism for the various processor

s/processor/processors

Quoted 9 lines
drivers/hwspinlock/Kconfig +5 -0
+         on the SoC.
+
+         It's safe to say n here if you're not interested in SIRF hardware
+         spinlock or just want a bare minimum kernel.
+
 endmenu
drivers/hwspinlock/Makefile +0 -1
index 93eb64b..472b82d 100644
--- a/drivers/hwspinlock/Makefile
Quoted 8 lines

drivers/hwspinlock/Makefile line 8

Quoted 6 lines

+++ b/drivers/hwspinlock/Makefile

drivers/hwspinlock/Makefile +1 -0
@@ -5,3 +5,4 @@
 obj-$(CONFIG_HWSPINLOCK)               += hwspinlock_core.o
 obj-$(CONFIG_HWSPINLOCK_OMAP)          += omap_hwspinlock.o
 obj-$(CONFIG_HSEM_U8500)               += u8500_hsem.o
+obj-$(CONFIG_HWSPINLOCK_SIRF)          += sirf_hwspinlock.o

Please keep sort order here as well.

looks fine.

Quoted 54 lines
Quoted 54 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +47 -0
new file mode 100644
index 0000000..b68722a
@@ -0,0 +1,151 @@
+/*
+ * SIRF hardware spinlock driver
+ *
+ * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/hwspinlock.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "hwspinlock_internal.h"
+
+struct sirf_hwspinlock {
+       void __iomem *io_base;
+       struct hwspinlock_device bank;
+};
+
+/* Hardware spinlock register offsets */
+#define HW_SPINLOCK_RD_DEBUG   0x400
+#define HW_SPINLOCK_BASE       0x404
+#define HW_SPINLOCK_OFFSET(x)  (HW_SPINLOCK_BASE + 0x4 * (x))
+
+/* Possible values of HW_SPINLOCK_REG */
+#define HW_SPINLOCK_LOCKED     0
+#define HW_SPINLOCK_FREE       1
+
+static int sirf_hwspinlock_trylock(struct hwspinlock *lock)
+{
+       void __iomem *lock_addr = lock->priv;
+
+       /* attempt to acquire the lock by reading its value */
+       return (HW_SPINLOCK_FREE == readl(lock_addr));
+}
+
+static void sirf_hwspinlock_unlock(struct hwspinlock *lock)
Quoted 8 lines

drivers/hwspinlock/sirf_hwspinlock.c line 52

Quoted 5 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +5 -0
+{
+       void __iomem *lock_addr = lock->priv;
+
+       /* release the lock by writing 0 to it */
+       writel(HW_SPINLOCK_LOCKED, lock_addr);

This looks really wierd, but I assume the naming of the value is in line with hardware documentation(?)

looks wired too. will double-check.

Quoted 56 lines

Instead of having the somewhat confusing names you could replace the constants with just:
return !!readl(lock_addr);
and
writel(0, lock_addr);

If nothing else because you have the comments there as well...

Quoted 12 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +12 -0
+}
+
+static void sirf_hwspinlock_relax(struct hwspinlock *lock)
+{
+       ndelay(50);
+}
+
+static const struct hwspinlock_ops sirf_hwspinlock_ops = {
+       .trylock = sirf_hwspinlock_trylock,
+       .unlock = sirf_hwspinlock_unlock,
+       .relax = sirf_hwspinlock_relax,
+};

drivers/hwspinlock/sirf_hwspinlock.c line 74

Quoted 10 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +10 -0
+
+static int sirf_hwspinlock_probe(struct platform_device *pdev)
+{
+       struct sirf_hwspinlock *hwspin;
+       struct hwspinlock *hwlock;
+       u32 num_of_locks;
+       int idx, ret;
+
+       ret = of_property_read_u32(pdev->dev.of_node,
+                       "num-spinlocks", &num_of_locks);

As above; if you need this the property should have a "sirf," prefix.

drivers/hwspinlock/sirf_hwspinlock.c line 77

Quoted 3 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +3 -0
+       if (ret) {
+               dev_err(&pdev->dev,
+                       "Unable to find hwspinlock number. ret=%d\n", ret);

No need to print the error code here.

drivers/hwspinlock/sirf_hwspinlock.c line 89

Quoted 12 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +12 -0
+               return -ENODEV;
+       }
+
+       hwspin = devm_kzalloc(&pdev->dev, sizeof(*hwspin) +
+                       sizeof(*hwlock) * num_of_locks, GFP_KERNEL);
+       if (!hwspin)
+               return -ENOMEM;
+
+       /* retrieve io base */
+       hwspin->io_base = of_iomap(pdev->dev.of_node, 0);
+       if (!hwspin->io_base)
+               ret = -ENOMEM;

By using something like the following you can use devres for the ioremap.

Quoted 4 lines

res = platform_get_resource(pdev, IORESOURCE_MEM, 0); hwspin->io_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hwspin->io_base))
return PTR_ERR(hwspin->io_base);

the benefit should be avoiding kfree. this should be a coding style issue. i think this of_iomap is following the existing omap driver.

Quoted 28 lines
Quoted 28 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +27 -0
+
+       for (idx = 0; idx < num_of_locks; idx++) {
+               hwlock = &hwspin->bank.lock[idx];
+               hwlock->priv = hwspin->io_base + HW_SPINLOCK_OFFSET(idx);
+       }
+
+       platform_set_drvdata(pdev, hwspin);
+
+       pm_runtime_enable(&pdev->dev);
+
+       ret = hwspin_lock_register(&hwspin->bank, &pdev->dev,
+                               &sirf_hwspinlock_ops, 0, num_of_locks);
+       if (ret)
+               goto reg_failed;
+
+       return 0;
+
+reg_failed:
+       pm_runtime_disable(&pdev->dev);
+       iounmap(hwspin->io_base);
+
+       return ret;
+}
+
+static int sirf_hwspinlock_remove(struct platform_device *pdev)
+{
+       struct sirf_hwspinlock *hwspin = platform_get_drvdata(pdev);
Quoted 9 lines

drivers/hwspinlock/sirf_hwspinlock.c line 122

Quoted 6 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +6 -0
+       int ret;
+
+       ret = hwspin_lock_unregister(&hwspin->bank);
+       if (ret) {
+               dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
+               return ret;

Even if you return an error here the device will still be torn down.

so what is your suggestion about this? do you think the unregister should be "void" as other unregister functions?

Quoted 32 lines
Quoted 19 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +19 -0
+       }
+
+       pm_runtime_disable(&pdev->dev);
+
+       iounmap(hwspin->io_base);
+
+       return 0;
+}
+
+static const struct of_device_id sirf_hwpinlock_ids[] = {
+       { .compatible = "sirf,hwspinlock", },
+       {},
+};
+MODULE_DEVICE_TABLE(of, sirf_hwpinlock_ids);
+
+static struct platform_driver sirf_hwspinlock_driver = {
+       .probe = sirf_hwspinlock_probe,
+       .remove = sirf_hwspinlock_remove,
+       .driver = {

drivers/hwspinlock/sirf_hwspinlock.c line 151

Quoted 10 lines
drivers/hwspinlock/sirf_hwspinlock.c new file +10 -0
+               .name = "atlas7_hwspinlock",
+               .of_match_table = of_match_ptr(sirf_hwpinlock_ids),
+       },
+};
+
+module_platform_driver(sirf_hwspinlock_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("SIRF Hardware spinlock driver");
+MODULE_AUTHOR("Wei Chen <[email protected]>");

Part of these details I think the patch looks good.

Quoted 2 lines

Regards,
Bjorn

-barry
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html