Skip to contentSkip to conversation

x86: Set serial port IRQ for SMSC LPC47M

PATCH New Bin Meng 2 participants 3 messages Mar 31, 2015 – Apr 20, 2015

Subsystems (2)
lore
Share & tools
lore

Bin Meng

author
#0 lore raw

PATCH 1/1 x86: Set serial port IRQ for SMSC LPC47M

For starting a Linux console on the superio serial port under interrupt mode, the IRQ number must be configured.

---

 arch/x86/include/asm/ibmpc.h      | 3 +++
 board/intel/crownbay/crownbay.c   | 2 +-
 board/intel/minnowmax/minnowmax.c | 2 +-
 drivers/misc/smsc_lpc47m.c        | 3 ++-
 include/smsc_lpc47m.h             | 3 ++-
 5 files changed, 9 insertions(+), 4 deletions(-)
arch/x86/include/asm/ibmpc.h +3 -0
index c3b5187..678cde4 100644
@@ -21,4 +21,7 @@
 #define UART0_BASE	0x3f8
 #define UART1_BASE	0x2f8
 
+#define UART0_IRQ	4
+#define UART1_IRQ	3
+
 #endif
board/intel/crownbay/crownbay.c +1 -1
index 2a254ef..31bb320 100644
@@ -16,7 +16,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int board_early_init_f(void)
 {
-	lpc47m_enable_serial(SERIAL_DEV, UART0_BASE);
+	lpc47m_enable_serial(SERIAL_DEV, UART0_BASE, UART0_IRQ);
 
 	return 0;
 }
board/intel/minnowmax/minnowmax.c +1 -1
index 6e82b16..fd2070a 100644
@@ -16,7 +16,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int board_early_init_f(void)
 {
-	lpc47m_enable_serial(SERIAL_DEV, UART0_BASE);
+	lpc47m_enable_serial(SERIAL_DEV, UART0_BASE, UART0_IRQ);
 
 	return 0;
 }
drivers/misc/smsc_lpc47m.c +2 -1
index d51f8e3..1e50d5b 100644
@@ -22,12 +22,13 @@ static void pnp_exit_conf_state(u16 dev)
 	outb(0xaa, port);
 }
 
-void lpc47m_enable_serial(u16 dev, u16 iobase)
+void lpc47m_enable_serial(u16 dev, u16 iobase, u8 irq)
 {
 	pnp_enter_conf_state(dev);
 	pnp_set_logical_device(dev);
 	pnp_set_enable(dev, 0);
 	pnp_set_iobase(dev, PNP_IDX_IO0, iobase);
+	pnp_set_irq(dev, PNP_IDX_IRQ0, irq);
 	pnp_set_enable(dev, 1);
 	pnp_exit_conf_state(dev);
 }
include/smsc_lpc47m.h +2 -1
index bffd622..32b069d 100644
@@ -13,7 +13,8 @@
  *
  * @dev: High 8 bits = Super I/O port, low 8 bits = logical device number.
  * @iobase: Processor I/O port address to assign to this serial device.
+ * @irq: Processor IRQ number to assign to this serial device.
  */
-void lpc47m_enable_serial(u16 dev, u16 iobase);
+void lpc47m_enable_serial(u16 dev, u16 iobase, u8 irq);
 
 #endif /* _SMSC_LPC47M_H_ */
Signature · 1 line
1.8.2.1
#1 lore raw

PATCH 1/1 x86: Set serial port IRQ for SMSC LPC47M

Quoted 5 lines · Bin Meng

For starting a Linux console on the superio serial port under interrupt mode, the IRQ number must be configured.

Quoted 8 lines

---

 arch/x86/include/asm/ibmpc.h      | 3 +++
 board/intel/crownbay/crownbay.c   | 2 +-
 board/intel/minnowmax/minnowmax.c | 2 +-
 drivers/misc/smsc_lpc47m.c        | 3 ++-
 include/smsc_lpc47m.h             | 3 ++-
 5 files changed, 9 insertions(+), 4 deletions(-)
#2 lore raw

PATCH 1/1 x86: Set serial port IRQ for SMSC LPC47M

Quoted 8 lines · Simon Glass
Quoted 7 lines · Bin Meng

For starting a Linux console on the superio serial port under interrupt mode, the IRQ number must be configured.

---

Quoted 8 lines
Quoted 6 lines
 arch/x86/include/asm/ibmpc.h      | 3 +++
 board/intel/crownbay/crownbay.c   | 2 +-
 board/intel/minnowmax/minnowmax.c | 2 +-
 drivers/misc/smsc_lpc47m.c        | 3 ++-
 include/smsc_lpc47m.h             | 3 ++-
 5 files changed, 9 insertions(+), 4 deletions(-)

Applied to u-boot-x86, thanks!