Skip to contentSkip to conversation

mfd/axp20x: add support for extcon cell

PATCH In review Ramakrishna Pallala 2 participants 2 messages Mar 31, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 mfd/axp20x: add support for extcon cell

This patch adds the mfd cell info for axp288 extcon device.

---
 drivers/mfd/axp20x.c       |   28 ++++++++++++++++++++++++++++
 include/linux/mfd/axp20x.h |    5 +++++
 2 files changed, 33 insertions(+)
drivers/mfd/axp20x.c +28 -0
index 0acbe52..30af1a3 100644
@@ -290,6 +290,29 @@ static struct resource axp288_adc_resources[] = {
 	},
 };
 
+static struct resource axp288_extcon_resources[] = {
+	{
+		.start = AXP288_IRQ_VBUS_FALL,
+		.end   = AXP288_IRQ_VBUS_FALL,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_VBUS_RISE,
+		.end   = AXP288_IRQ_VBUS_RISE,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_MV_CHNG,
+		.end   = AXP288_IRQ_MV_CHNG,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_BC_USB_CHNG,
+		.end   = AXP288_IRQ_BC_USB_CHNG,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
 static struct resource axp288_charger_resources[] = {
 	{
 		.start = AXP288_IRQ_OV,
@@ -345,6 +368,11 @@ static struct mfd_cell axp288_cells[] = {
 		.resources = axp288_adc_resources,
 	},
 	{
+		.name = "extcon-axp288",
+		.num_resources = ARRAY_SIZE(axp288_extcon_resources),
+		.resources = axp288_extcon_resources,
+	},
+	{
 		.name = "axp288_charger",
 		.num_resources = ARRAY_SIZE(axp288_charger_resources),
 		.resources = axp288_charger_resources,
include/linux/mfd/axp20x.h +5 -0
index dfabd6d..4ed8071 100644
@@ -275,4 +275,9 @@ struct axp20x_fg_pdata {
 	int thermistor_curve[MAX_THERM_CURVE_SIZE][2];
 };
 
+struct axp288_extcon_pdata {
+	/* GPIO pin control to switch D+/D- lines b/w PMIC and SOC */
+	struct gpio_desc *gpio_mux_cntl;
+};
+
 #endif /* __LINUX_MFD_AXP20X_H */
Signature · 1 line
1.7.9.5
#1 lore raw

There is no such thing as v0, yhe first version should be v1.

You don't need to write v1 in the subject line either.

Quoted 59 lines · Ramakrishna Pallala

This patch adds the mfd cell info for axp288 extcon device.

---
 drivers/mfd/axp20x.c       |   28 ++++++++++++++++++++++++++++
 include/linux/mfd/axp20x.h |    5 +++++
 2 files changed, 33 insertions(+)
drivers/mfd/axp20x.c +28 -0
index 0acbe52..30af1a3 100644
@@ -290,6 +290,29 @@ static struct resource axp288_adc_resources[] = {
 	},
 };
 
+static struct resource axp288_extcon_resources[] = {
+	{
+		.start = AXP288_IRQ_VBUS_FALL,
+		.end   = AXP288_IRQ_VBUS_FALL,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_VBUS_RISE,
+		.end   = AXP288_IRQ_VBUS_RISE,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_MV_CHNG,
+		.end   = AXP288_IRQ_MV_CHNG,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_BC_USB_CHNG,
+		.end   = AXP288_IRQ_BC_USB_CHNG,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
 static struct resource axp288_charger_resources[] = {
 	{
 		.start = AXP288_IRQ_OV,
@@ -345,6 +368,11 @@ static struct mfd_cell axp288_cells[] = {
 		.resources = axp288_adc_resources,
 	},
 	{
+		.name = "extcon-axp288",
+		.num_resources = ARRAY_SIZE(axp288_extcon_resources),
+		.resources = axp288_extcon_resources,
+	},
+	{
 		.name = "axp288_charger",
 		.num_resources = ARRAY_SIZE(axp288_charger_resources),
 		.resources = axp288_charger_resources,
include/linux/mfd/axp20x.h +0 -0
index dfabd6d..4ed8071 100644

include/linux/mfd/axp20x.h struct axp20x_fg_pdata { · line 282

Quoted 8 lines
include/linux/mfd/axp20x.h +5 -0
@@ -275,4 +275,9 @@ struct axp20x_fg_pdata {
 	int thermistor_curve[MAX_THERM_CURVE_SIZE][2];
 };
 
+struct axp288_extcon_pdata {
+	/* GPIO pin control to switch D+/D- lines b/w PMIC and SOC */
+	struct gpio_desc *gpio_mux_cntl;
+};
+

What does this have to do with this patch?

Quoted 1 line
include/linux/mfd/axp20x.h +0 -0
 #endif /* __LINUX_MFD_AXP20X_H */
Signature · 4 lines
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog