ALSA: hda - add hda controller to hda core
v3 cover ALSA: hda - add hda controller to hda core
This incorporates the comments from Takashi on 1st patch and uses the change from Takashi's unstable tree for controller and then adds the DSP loader code on top.
This is based on sound/topic/hda-core
Comments welcome
Jeeja KP (1):
ALSA: hda: move common hda controller register defines up
Vinod Koul (4):
ALSA: hda: add HDA_MAX_CODECS
ALSA: hda - Add the controller helper codes to hda-core module
ALSA: hda - move dsp lock to hdac
ALSA: hda - add the DSP loader code
include/sound/hda_registers.h | 177 +++++++++++++ include/sound/hdaudio.h | 185 ++++++++++++- sound/hda/Makefile | 3 +- sound/hda/hdac_bus.c | 13 +- sound/hda/hdac_controller.c | 401 ++++++++++++++++++++++++++++ sound/hda/hdac_stream.c | 565 ++++++++++++++++++++++++++++++++++++++++ sound/pci/hda/hda_controller.c | 17 +- sound/pci/hda/hda_controller.h | 171 +----------- 8 files changed, 1347 insertions(+), 185 deletions(-) create mode 100644 include/sound/hda_registers.h create mode 100644 sound/hda/hdac_controller.c create mode 100644 sound/hda/hdac_stream.c
Signature · 1 line
1.7.9.5
PATCH v3 1/5 ALSA: hda: add HDA_MAX_CODECS
This moves AZX_MAX_CODECS define to HDA_MAX_CODECS so that common code can use this as well
--- include/sound/hdaudio.h | 2 ++ sound/pci/hda/hda_controller.c | 4 ++-- sound/pci/hda/hda_controller.h | 9 ++++----- 3 files changed, 8 insertions(+), 7 deletions(-)
include/sound/hdaudio.h +2 -0
@@ -8,6 +8,8 @@#include <linux/device.h> #include <sound/hda_verbs.h> +#define HDA_MAX_CODECS 8 +/* codec node id */ typedef u16 hda_nid_t ;
sound/pci/hda/hda_controller.c +2 -2
@@ -1066,7 +1066,7 @@ static unsigned int azx_command_addr(u32 cmd) {unsigned int addr = cmd >>28 ; -if (addr >=AZX_MAX_CODECS ) { +if (addr >=HDA_MAX_CODECS ) {snd_BUG (); addr =0 ; }
@@ -1136,7 +1136,7 @@ static void azx_update_rirb(struct azx *chip) res_ex =le32_to_cpu (chip->rirb.buf[rp +1 ]); res =le32_to_cpu (chip->rirb.buf[rp]); addr = res_ex &0xf ; -if ((addr >=AZX_MAX_CODECS ) || !(chip->codec_mask & (1 << addr))) { +if ((addr >=HDA_MAX_CODECS ) || !(chip->codec_mask & (1 << addr))) {dev_err (chip->card->dev,"spurious response %#x:%#x, rp = %d, wp = %d" , res, res_ex, chip->rirb.rp, wp);
sound/pci/hda/hda_controller.h +4 -5
@@ -119,9 +119,8 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };#define RIRB_INT_MASK 0x05/* STATESTS int mask: S3,SD2,SD1,SD0 */ -#define AZX_MAX_CODECS 8#define AZX_DEFAULT_CODECS 4 -#define STATESTS_INT_MASK ((1 << AZX_MAX_CODECS) - 1) +#define STATESTS_INT_MASK ((1 << HDA_MAX_CODECS) - 1)/* SD_CTL bits */ #define SD_CTL_STREAM_RESET 0x01/* stream reset bit */
@@ -245,8 +244,8 @@ struct azx_rb {dma_addr_t addr;/* physical address of CORB/RIRB buffer */ /* for RIRB */ unsigned short rp, wp;/* read/write pointers */ -int cmds[AZX_MAX_CODECS ];/* number of pending requests */ -u32 res[AZX_MAX_CODECS ];/* last read value */ +int cmds[HDA_MAX_CODECS ];/* number of pending requests */ +u32 res[HDA_MAX_CODECS ];/* last read value */ };struct azx ;
@@ -360,7 +359,7 @@ struct azx { unsigned int disabled:1; /* disabled by VGA-switcher *//* for debugging */ -unsigned int last_cmd[AZX_MAX_CODECS ]; +unsigned int last_cmd[HDA_MAX_CODECS ];#ifdef CONFIG_SND_HDA_DSP_LOADER struct azx_dev saved_azx_dev;
Signature · 1 line
1.7.9.5
PATCH v3 2/5 ALSA: hda: move common hda controller register defines up
In reply to Vinod KoulFrom: Jeeja KP <[email protected]>
The HDA register defines would be accessed by both existing codes as well as new code, so move it up to include/sound
No code change, fixed few alignment though
--- include/sound/hda_registers.h | 168 ++++++++++++++++++++++++++++++++++++++++ sound/pci/hda/hda_controller.h | 164 +-------------------------------------- 2 files changed, 169 insertions(+), 163 deletions(-) create mode 100644 include/sound/hda_registers.h
include/sound/hda_registers.h new file +168 -0
@@ -0,0 +1,168 @@ +#ifndef __SOUND_HDA_REGISTERS_H +#define __SOUND_HDA_REGISTERS_H + +/* +* registers +*/ +#define AZX_REG_GCAP 0x00 +#define AZX_GCAP_64OK (1 << 0)/* 64bit address support */ +#define AZX_GCAP_NSDO (3 << 1)/* # of serial data out signals */ +#define AZX_GCAP_BSS (31 << 3)/* # of bidirectional streams */ +#define AZX_GCAP_ISS (15 << 8)/* # of input streams */ +#define AZX_GCAP_OSS (15 << 12)/* # of output streams */ +#define AZX_REG_VMIN 0x02 +#define AZX_REG_VMAJ 0x03 +#define AZX_REG_OUTPAY 0x04 +#define AZX_REG_INPAY 0x06 +#define AZX_REG_GCTL 0x08 +#define AZX_GCTL_RESET (1 << 0)/* controller reset */ +#define AZX_GCTL_FCNTRL (1 << 1)/* flush control */ +#define AZX_GCTL_UNSOL (1 << 8)/* accept unsol. response enable */ +#define AZX_REG_WAKEEN 0x0c +#define AZX_REG_STATESTS 0x0e +#define AZX_REG_GSTS 0x10 +#define AZX_GSTS_FSTS (1 << 1)/* flush status */ +#define AZX_REG_INTCTL 0x20 +#define AZX_REG_INTSTS 0x24 +#define AZX_REG_WALLCLK 0x30/* 24Mhz source */ +#define AZX_REG_OLD_SSYNC 0x34/* SSYNC for old ICH */ +#define AZX_REG_SSYNC 0x38 +#define AZX_REG_CORBLBASE 0x40 +#define AZX_REG_CORBUBASE 0x44 +#define AZX_REG_CORBWP 0x48 +#define AZX_REG_CORBRP 0x4a +#define AZX_CORBRP_RST (1 << 15)/* read pointer reset */ +#define AZX_REG_CORBCTL 0x4c +#define AZX_CORBCTL_RUN (1 << 1)/* enable DMA */ +#define AZX_CORBCTL_CMEIE (1 << 0)/* enable memory error irq */ +#define AZX_REG_CORBSTS 0x4d +#define AZX_CORBSTS_CMEI (1 << 0)/* memory error indication */ +#define AZX_REG_CORBSIZE 0x4e + +#define AZX_REG_RIRBLBASE 0x50 +#define AZX_REG_RIRBUBASE 0x54 +#define AZX_REG_RIRBWP 0x58 +#define AZX_RIRBWP_RST (1 << 15)/* write pointer reset */ +#define AZX_REG_RINTCNT 0x5a +#define AZX_REG_RIRBCTL 0x5c +#define AZX_RBCTL_IRQ_EN (1 << 0)/* enable IRQ */ +#define AZX_RBCTL_DMA_EN (1 << 1)/* enable DMA */ +#define AZX_RBCTL_OVERRUN_EN (1 << 2)/* enable overrun irq */ +#define AZX_REG_RIRBSTS 0x5d +#define AZX_RBSTS_IRQ (1 << 0)/* response irq */ +#define AZX_RBSTS_OVERRUN (1 << 2)/* overrun irq */ +#define AZX_REG_RIRBSIZE 0x5e + +#define AZX_REG_IC 0x60 +#define AZX_REG_IR 0x64 +#define AZX_REG_IRS 0x68 +#define AZX_IRS_VALID (1<<1) +#define AZX_IRS_BUSY (1<<0) + +#define AZX_REG_DPLBASE 0x70 +#define AZX_REG_DPUBASE 0x74 +#define AZX_DPLBASE_ENABLE 0x1/* Enable position buffer */ + +/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ +enum {SDI0 ,SDI1 ,SDI2 ,SDI3 ,SDO0 ,SDO1 ,SDO2 ,SDO3 }; + +/* stream register offsets from stream base */ +#define AZX_REG_SD_CTL 0x00 +#define AZX_REG_SD_STS 0x03 +#define AZX_REG_SD_LPIB 0x04 +#define AZX_REG_SD_CBL 0x08 +#define AZX_REG_SD_LVI 0x0c +#define AZX_REG_SD_FIFOW 0x0e +#define AZX_REG_SD_FIFOSIZE 0x10 +#define AZX_REG_SD_FORMAT 0x12 +#define AZX_REG_SD_BDLPL 0x18 +#define AZX_REG_SD_BDLPU 0x1c + +/* PCI space */ +#define AZX_PCIREG_TCSEL 0x44 + +/* +* other constants +*/ + +/* max number of fragments - we may use more if allocating more pages for BDL */ +#define BDL_SIZE 4096 +#define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16) +#define AZX_MAX_FRAG 32 +/* max buffer size - no h/w limit, you can increase as you like */ +#define AZX_MAX_BUF_SIZE (1024*1024*1024) + +/* RIRB int mask: overrun[2], response[0] */ +#define RIRB_INT_RESPONSE 0x01 +#define RIRB_INT_OVERRUN 0x04 +#define RIRB_INT_MASK 0x05 + +/* STATESTS int mask: S3,SD2,SD1,SD0 */ +#define AZX_DEFAULT_CODECS 4 +#define STATESTS_INT_MASK ((1 << HDA_MAX_CODECS) - 1) + +/* SD_CTL bits */ +#define SD_CTL_STREAM_RESET 0x01/* stream reset bit */ +#define SD_CTL_DMA_START 0x02/* stream DMA start bit */ +#define SD_CTL_STRIPE (3 << 16)/* stripe control */ +#define SD_CTL_TRAFFIC_PRIO (1 << 18)/* traffic priority */ +#define SD_CTL_DIR (1 << 19)/* bi-directional stream */ +#define SD_CTL_STREAM_TAG_MASK (0xf << 20) +#define SD_CTL_STREAM_TAG_SHIFT 20 + +/* SD_CTL and SD_STS */ +#define SD_INT_DESC_ERR 0x10/* descriptor error interrupt */ +#define SD_INT_FIFO_ERR 0x08/* FIFO error interrupt */ +#define SD_INT_COMPLETE 0x04/* completion interrupt */ +#define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\ + SD_INT_COMPLETE) + +/* SD_STS */ +#define SD_STS_FIFO_READY 0x20/* FIFO ready */ + +/* INTCTL and INTSTS */ +#define AZX_INT_ALL_STREAM 0xff/* all stream interrupts */ +#define AZX_INT_CTRL_EN 0x40000000/* controller interrupt enable bit */ +#define AZX_INT_GLOBAL_EN 0x80000000/* global interrupt enable bit */ + +/* below are so far hardcoded - should read registers in future */ +#define AZX_MAX_CORB_ENTRIES 256 +#define AZX_MAX_RIRB_ENTRIES 256 + +/* HD Audio class code */ +#define PCI_CLASS_MULTIMEDIA_HD_AUDIO 0x0403 + +/* +* macros for easy use +*/ + +#define azx_writel (chip, reg, value) \ + ((chip)->ops->reg_writel(value, (chip)->remap_addr + AZX_REG_##reg)) +#define azx_readl (chip, reg) \ + ((chip)->ops->reg_readl((chip)->remap_addr + AZX_REG_##reg)) +#define azx_writew (chip, reg, value) \ + ((chip)->ops->reg_writew(value, (chip)->remap_addr + AZX_REG_##reg)) +#define azx_readw (chip, reg) \ + ((chip)->ops->reg_readw((chip)->remap_addr + AZX_REG_##reg)) +#define azx_writeb (chip, reg, value) \ + ((chip)->ops->reg_writeb(value, (chip)->remap_addr + AZX_REG_##reg)) +#define azx_readb (chip, reg) \ + ((chip)->ops->reg_readb((chip)->remap_addr + AZX_REG_##reg)) + +#define azx_sd_writel (chip, dev, reg, value) \ + ((chip)->ops->reg_writel(value, (dev)->sd_addr + AZX_REG_##reg)) +#define azx_sd_readl (chip, dev, reg) \ + ((chip)->ops->reg_readl((dev)->sd_addr + AZX_REG_##reg)) +#define azx_sd_writew (chip, dev, reg, value) \ + ((chip)->ops->reg_writew(value, (dev)->sd_addr + AZX_REG_##reg)) +#define azx_sd_readw (chip, dev, reg) \ + ((chip)->ops->reg_readw((dev)->sd_addr + AZX_REG_##reg)) +#define azx_sd_writeb (chip, dev, reg, value) \ + ((chip)->ops->reg_writeb(value, (dev)->sd_addr + AZX_REG_##reg)) +#define azx_sd_readb (chip, dev, reg) \ + ((chip)->ops->reg_readb((dev)->sd_addr + AZX_REG_##reg)) + +#define azx_has_pm_runtime (chip) \ + (!AZX_DCAPS_PM_RUNTIME || ((chip)->driver_caps & AZX_DCAPS_PM_RUNTIME)) + +#endif
sound/pci/hda/hda_controller.h +1 -163
184 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH v3 3/5 ALSA: hda - Add the controller helper codes to
In reply to Vinod KoulFrom: Takashi Iwai <[email protected]>
This is picked from Takashi's unstable tree and rebased on top of other changes done
--- include/sound/hda_registers.h | 41 ++-- include/sound/hdaudio.h | 151 ++++++++++++- sound/hda/Makefile | 3 +- sound/hda/hdac_bus.c | 13 +- sound/hda/hdac_controller.c | 401 ++++++++++++++++++++++++++++++++++ sound/hda/hdac_stream.c | 473 +++++++++++++++++++++++++++++++++++++++++ 6 files changed, 1063 insertions(+), 19 deletions(-) create mode 100644 sound/hda/hdac_controller.c create mode 100644 sound/hda/hdac_stream.c
include/sound/hda_registers.h +25 -16
@@ -135,32 +135,41 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };/* * macros for easy use */ +#define _azx_write (type, chip, reg, value) \ + ((chip)->ops->reg_write ## type(value, (chip)->remap_addr + (reg))) +#define _azx_read (type, chip, reg) \ + ((chip)->ops->reg_read ## type((chip)->remap_addr + (reg)))#define azx_writel (chip, reg, value) \ - ((chip)->ops->reg_writel(value, (chip)->remap_addr + AZX_REG_##reg)) -#define azx_readl (chip, reg) \ - ((chip)->ops->reg_readl((chip)->remap_addr + AZX_REG_##reg)) + _azx_write(l, chip, AZX_REG_ ## reg, value)#define azx_writew (chip, reg, value) \ - ((chip)->ops->reg_writew(value, (chip)->remap_addr + AZX_REG_##reg)) -#define azx_readw (chip, reg) \ - ((chip)->ops->reg_readw((chip)->remap_addr + AZX_REG_##reg)) + _azx_write(w, chip, AZX_REG_ ## reg, value)#define azx_writeb (chip, reg, value) \ - ((chip)->ops->reg_writeb(value, (chip)->remap_addr + AZX_REG_##reg)) + _azx_write(b, chip, AZX_REG_ ## reg, value) +#define azx_readl (chip, reg) \ + _azx_read(l, chip, AZX_REG_ ## reg) +#define azx_readw (chip, reg) \ + _azx_read(w, chip, AZX_REG_ ## reg)#define azx_readb (chip, reg) \ - ((chip)->ops->reg_readb((chip)->remap_addr + AZX_REG_##reg)) + _azx_read(b, chip, AZX_REG_ ## reg) + +#define _azx_sd_write (type, chip, dev, reg, value) \ + ((chip)->ops->reg_write ## type(value, (dev)->sd_addr + (reg))) +#define _azx_sd_read (type, chip, dev, reg) \ + ((chip)->ops->reg_read ## type((dev)->sd_addr + (reg)))#define azx_sd_writel (chip, dev, reg, value) \ - ((chip)->ops->reg_writel(value, (dev)->sd_addr + AZX_REG_##reg)) -#define azx_sd_readl (chip, dev, reg) \ - ((chip)->ops->reg_readl((dev)->sd_addr + AZX_REG_##reg)) + _azx_sd_write(l, chip, dev, AZX_REG_ ## reg, value)#define azx_sd_writew (chip, dev, reg, value) \ - ((chip)->ops->reg_writew(value, (dev)->sd_addr + AZX_REG_##reg)) -#define azx_sd_readw (chip, dev, reg) \ - ((chip)->ops->reg_readw((dev)->sd_addr + AZX_REG_##reg)) + _azx_sd_write(w, chip, dev, AZX_REG_ ## reg, value)#define azx_sd_writeb (chip, dev, reg, value) \ - ((chip)->ops->reg_writeb(value, (dev)->sd_addr + AZX_REG_##reg)) + _azx_sd_write(b, chip, dev, AZX_REG_ ## reg, value) +#define azx_sd_readl (chip, dev, reg) \ + _azx_sd_read(l, chip, dev, AZX_REG_ ## reg) +#define azx_sd_readw (chip, dev, reg) \ + _azx_sd_read(w, chip, dev, AZX_REG_ ## reg)#define azx_sd_readb (chip, dev, reg) \ - ((chip)->ops->reg_readb((dev)->sd_addr + AZX_REG_##reg)) + _azx_sd_read(b, chip, dev, AZX_REG_ ## reg)#define azx_has_pm_runtime (chip) \ (!AZX_DCAPS_PM_RUNTIME || ((chip)->driver_caps & AZX_DCAPS_PM_RUNTIME))
include/sound/hdaudio.h +150 -1
194 lines not on this page · raw message
sound/hda/Makefile +2 -1
@@ -1,4 +1,5 @@ -snd-hda-core-objs := hda_bus_type.o hdac_bus.o hdac_device.o hdac_sysfs.o +snd-hda-core-objs := hda_bus_type.o hdac_bus.o hdac_device.o hdac_sysfs.o \ + hdac_controller.o hdac_stream.o snd-hda-core-objs += trace.o CFLAGS_trace.o := -I$(src)
sound/hda/hdac_bus.c +12 -1
@@ -11,6 +11,11 @@static void process_unsol_events (struct work_struct *work); +static const struct hdac_bus_ops default_ops = { + .command = snd_hdac_bus_send_cmd, + .get_response = snd_hdac_bus_get_response, +}; +/** * snd_hdac_bus_init - initialize a HD-audio bas bus * @bus: the pointer to bus object
@@ -22,9 +27,14 @@ int snd_hdac_bus_init(struct hdac_bus *bus, struct device *dev, {memset (bus,0 ,sizeof (*bus)); bus->dev = dev; - bus->ops = ops; +if (ops) + bus->ops = ops; +else + bus->ops = &default_ops; +INIT_LIST_HEAD (&bus->stream_list);INIT_LIST_HEAD (&bus->codec_list);INIT_WORK (&bus->unsol_work, process_unsol_events); +spin_lock_init (&bus->reg_lock);mutex_init (&bus->cmd_mutex);return 0 ; }
@@ -36,6 +46,7 @@ EXPORT_SYMBOL_GPL(snd_hdac_bus_init);*/ void snd_hdac_bus_exit (struct hdac_bus *bus) { +WARN_ON (!list_empty (&bus->stream_list));WARN_ON (!list_empty (&bus->codec_list));cancel_work_sync (&bus->unsol_work); }
sound/hda/hdac_controller.c new file +401 -0
401 lines not on this page · raw message
sound/hda/hdac_stream.c new file +473 -0
473 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH v3 4/5 ALSA: hda - move dsp lock to hdac
In reply to Vinod KoulDSP lock will be used by DSP code loader in hdac as well
--- include/sound/hdaudio.h | 17 +++++++++++++++++ sound/pci/hda/hda_controller.c | 13 ------------- 2 files changed, 17 insertions(+), 13 deletions(-)
include/sound/hdaudio.h +17 -0
@@ -15,6 +15,19 @@#define HDA_MAX_CODECS 8 +/* DSP lock helpers */ +#ifdef CONFIG_SND_HDA_DSP_LOADER +#define dsp_lock_init (dev) mutex_init(&(dev)->dsp_mutex) +#define dsp_lock (dev) mutex_lock(&(dev)->dsp_mutex) +#define dsp_unlock (dev) mutex_unlock(&(dev)->dsp_mutex) +#define dsp_is_locked (dev) ((dev)->locked) +#else +#define dsp_lock_init (dev) do {} while (0) +#define dsp_lock (dev) do {} while (0) +#define dsp_unlock (dev) do {} while (0) +#define dsp_is_locked (dev) 0 +#endif +/* codec node id */ typedef u16 hda_nid_t ;
@@ -283,6 +296,7 @@ struct hdac_stream { unsigned int opened:1; unsigned int running:1; unsigned int no_period_wakeup:1; + unsigned int locked:1;/* timestamp */ unsigned long start_wallclk;/* start + minimum wallclk */
@@ -292,6 +306,9 @@ struct hdac_stream {int delay_negative_threshold;struct list_head list; + +/* DSP mutex */ +struct mutex dsp_mutex; }; void snd_hdac_bus_stream_init(struct hdac_bus *bus, struct hdac_stream *azx_dev,
sound/pci/hda/hda_controller.c +0 -13
@@ -34,19 +34,6 @@#define CREATE_TRACE_POINTS #include "hda_intel_trace.h" -/* DSP lock helpers */ -#ifdef CONFIG_SND_HDA_DSP_LOADER -#define dsp_lock_init (dev) mutex_init(&(dev)->dsp_mutex) -#define dsp_lock (dev) mutex_lock(&(dev)->dsp_mutex) -#define dsp_unlock (dev) mutex_unlock(&(dev)->dsp_mutex) -#define dsp_is_locked (dev) ((dev)->locked) -#else -#define dsp_lock_init (dev) do {} while (0) -#define dsp_lock (dev) do {} while (0) -#define dsp_unlock (dev) do {} while (0) -#define dsp_is_locked (dev) 0 -#endif -/* * AZX stream operations. */
Signature · 1 line
1.7.9.5
PATCH v3 5/5 ALSA: hda - add the DSP loader code
In reply to Vinod KoulThis will be used by SKL controller
--- include/sound/hdaudio.h | 15 ++++++++ sound/hda/hdac_stream.c | 92 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 107 insertions(+)
include/sound/hdaudio.h +15 -0
@@ -153,6 +153,13 @@ struct hdac_bus_ops {u16 (*reg_readw)(u16__iomem *addr);void (*reg_writeb)(u8 value,u8 __iomem *addr);u8 (*reg_readb)(u8__iomem *addr); + +/* Allocation ops */ +int (*dma_alloc_pages)(struct hdac_bus *bus, +int type, +size_t size, +struct snd_dma_buffer *buf); +void (*dma_free_pages)(struct hdac_bus *bus,struct snd_dma_buffer *buf); };#define HDA_UNSOL_QUEUE_SIZE 64
@@ -330,6 +337,14 @@ void snd_hdac_stream_sync(struct hdac_stream *azx_dev, bool start, unsigned int streams);void snd_hdac_stream_timecounter_init (struct hdac_stream *azx_dev,unsigned int streams); +/*DSP loader functions */ +int snd_hdac_load_dsp_prepare (struct hdac_stream *azx_dev,unsigned int format, +unsigned int byte_size, +struct snd_dma_buffer *bufp); + +void snd_hdac_load_dsp_trigger (struct hdac_stream *azx_dev,bool start); +void snd_hdac_load_dsp_cleanup (struct hdac_stream *azx_dev, +struct snd_dma_buffer *dmab);/* * helpers to read the stream position
sound/hda/hdac_stream.c +92 -0
95 lines not on this page · raw message
Signature · 1 line
1.7.9.5