lpfc: Fix FDMI Fabric support in driver for Brocade

index 434e903..922e59d 100644
@@ -413,6 +413,9 @@ struct lpfc_vport {
 	uint32_t cfg_fcp_class;
 	uint32_t cfg_use_adisc;
 	uint32_t cfg_fdmi_on;
+#define LPFC_FDMI_SUPPORT	1	/* bit 0 - FDMI supported? */
+#define LPFC_FDMI_REG_DELAY	2	/* bit 1 - 60 sec registration delay */
+#define LPFC_FDMI_ALL_ATTRIB	4	/* bit 2 - register ALL attributes? */
 	uint32_t cfg_discovery_threads;
 	uint32_t cfg_log_verbose;
 	uint32_t cfg_max_luns;

index 374aa03..faf0e8c 100644
@@ -4573,12 +4573,18 @@ LPFC_ATTR_R(multi_ring_type, FC_TYPE_IP, 1,
 
 /*
 # lpfc_fdmi_on: controls FDMI support.
-#       0 = no FDMI support
-#       1 = support FDMI without attribute of hostname
-#       2 = support FDMI with attribute of hostname
-# Value range [0,2]. Default value is 0.
+#               Set                NOT Set
+#       bit 0 = FDMI support       no FDMI support
+#           LPFC_FDMI_SUPPORT just turns basic support on/off
+#       bit 1 = Register delay     no register delay  (60 seconds)
+#           LPFC_FDMI_REG_DELAY	60 sec registration delay after FDMI login
+#       bit 2 = All attributes     Use a attribute subset
+#           LPFC_FDMI_ALL_ATTRIB applies to both port and HBA attributes
+#           Port attrutes subset: 1 thru 6 OR all: 1 thru 0xd 0x101 0x102 0x103
+#           HBA attributes subset: 1 thru 0xb OR all: 1 thru 0xc
+# Value range [0,7]. Default value is 0.
 */
-LPFC_VPORT_ATTR_RW(fdmi_on, 0, 0, 2, "Enable FDMI support");
+LPFC_VPORT_ATTR_RW(fdmi_on, 0, 0, 7, "Enable FDMI support");
 
 /*
 # Specifies the maximum number of ELS cmds we can have outstanding (for

997 lines not on this page · raw message

index 6350563..9f3c74e 100644
@@ -7172,7 +7172,7 @@ lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport)
 		return;
 	}
 
-	if (vport->cfg_fdmi_on) {
+	if (vport->cfg_fdmi_on & LPFC_FDMI_SUPPORT) {
 		/* If this is the first time, allocate an ndlp and initialize
 		 * it. Otherwise, make sure the node is enabled and then do the
 		 * login.

index b1ad1a0..9d06d45 100644
@@ -5489,11 +5489,11 @@ lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	 * fdmi-on=2 (supporting RPA/hostnmae)
 	 */
 
-	if (vport->cfg_fdmi_on == 1)
-		lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA);
-	else
+	if (vport->cfg_fdmi_on & LPFC_FDMI_REG_DELAY)
 		mod_timer(&vport->fc_fdmitmo,
 			  jiffies + msecs_to_jiffies(1000 * 60));
+	else
+		lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA);
 
 	/* decrement the node reference count held for this callback
 	 * function.

284 lines not on this page · raw message