dm: net: Conversion patches for sunxi driver model Ethernet
Subsystems (6)
v2 cover dm: net: Conversion patches for sunxi driver model Ethernet
This series enables driver model Ethernet for the pcDuino3, converting the designware Ethernet MAC in the process. It also moves all sunxi board to use Kconfig for their basic Ethernet settings.
This series is based on u-boot-dm/next and requires Joe's patch here:
http://patchwork.ozlabs.org/patch/458111/
It is available at u-boot-dm in branch net-working.
Changes in v2:
- Add Ethernet for Orangepi, galileo
- Add Ethernet for Orangepi_mini, Wits_Pro_A20_DKT, Mele_I7
- Drop bugfix patches that were incorporated in the Ethernet dm conversion
- Drop the CONFIG_BOOTP_VCI_STRING patch
- Rebase on dm/next
- Remove unwanted printf()
- Use the new recv() method and the free_pkt() method
Simon Glass (11):
sunxi: Replace the pcDuino3 config with FDT version
Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig
dts: sunxi: Bring in Ethernet device tree bindings
dm: core: Support allocating driver-private data for DMA
dm: net: Use existing Ethernet init for driver model Avoid calling print_eths() with driver model
dm: net: Adjust PHY interface to work with CONFIG_DM_ETH
dm: net: Tidy up designware driver ready for driver model
dm: net: Adjust designware driver to support driver model
dm: sunxi: Support driver model for Ethernet
dm: sunxi: Use driver model for Ethernet on Linksprite pcDuino3
arch/arm/cpu/arm926ejs/spear/cpu.c | 2 +- arch/arm/cpu/armv7/socfpga/misc.c | 2 +- board/bf609-ezkit/bf609-ezkit.c | 2 +- board/spear/spear300/spear300.c | 2 +- board/spear/spear310/spear310.c | 2 +- board/spear/spear320/spear320.c | 2 +- board/spear/spear600/spear600.c | 2 +- board/st/stv0991/stv0991.c | 2 +- board/sunxi/gmac.c | 10 +- common/cmd_bdinfo.c | 2 +- common/miiphyutil.c | 1 + configs/A20-OLinuXino-Lime2_defconfig | 3 + configs/A20-OLinuXino-Lime_defconfig | 3 + configs/A20-OLinuXino_MICRO_defconfig | 3 + configs/Bananapi_defconfig | 3 + configs/Bananapro_defconfig | 3 + configs/CSQ_CS908_defconfig | 3 + configs/Colombus_defconfig | 3 + configs/Cubieboard2_defconfig | 3 + configs/Cubietruck_defconfig | 3 + configs/Hummingbird_A31_defconfig | 3 + configs/Linksprite_pcDuino3_Nano_defconfig | 3 + configs/Linksprite_pcDuino3_defconfig | 11 + configs/Linksprite_pcDuino3_fdt_defconfig | 15 -- configs/Mele_I7_defconfig | 3 + configs/Mele_M3_defconfig | 3 + configs/Mele_M5_defconfig | 3 + configs/Mele_M9_defconfig | 3 + configs/Orangepi_defconfig | 3 + configs/Orangepi_mini_defconfig | 3 + configs/Wits_Pro_A20_DKT_defconfig | 3 + configs/axs101_defconfig | 5 +- configs/axs103_defconfig | 3 + configs/bf609-ezkit_defconfig | 3 + configs/galileo_defconfig | 3 + configs/i12-tvbox_defconfig | 3 + configs/socfpga_cyclone5_defconfig | 3 + configs/socfpga_socrates_defconfig | 3 + configs/spear300_defconfig | 3 + configs/spear300_nand_defconfig | 3 + configs/spear300_usbtty_defconfig | 3 + configs/spear300_usbtty_nand_defconfig | 3 + configs/spear310_defconfig | 3 + configs/spear310_nand_defconfig | 3 + configs/spear310_pnor_defconfig | 3 + configs/spear310_usbtty_defconfig | 3 + configs/spear310_usbtty_nand_defconfig | 3 + configs/spear310_usbtty_pnor_defconfig | 3 + configs/spear320_defconfig | 3 + configs/spear320_nand_defconfig | 3 + configs/spear320_pnor_defconfig | 3 + configs/spear320_usbtty_defconfig | 3 + configs/spear320_usbtty_nand_defconfig | 3 + configs/spear320_usbtty_pnor_defconfig | 3 + configs/spear600_defconfig | 3 + configs/spear600_nand_defconfig | 3 + configs/spear600_usbtty_defconfig | 3 + configs/spear600_usbtty_nand_defconfig | 3 + configs/stv0991_defconfig | 3 + configs/tb100_defconfig | 3 + configs/x600_defconfig | 3 + .../net/allwinner,sun4i-emac.txt | 19 ++ .../net/allwinner,sun4i-mdio.txt | 27 +++ .../net/allwinner,sun7i-a20-gmac.txt | 27 +++ doc/device-tree-bindings/net/ethernet.txt | 25 +++ doc/device-tree-bindings/net/stmmac.txt | 63 ++++++ drivers/core/device.c | 11 +- drivers/net/Kconfig | 7 + drivers/net/Makefile | 2 +- drivers/net/designware.c | 250 +++++++++++++++++---- drivers/net/designware.h | 3 +- drivers/net/phy/phy.c | 22 ++ include/configs/axs101.h | 1 - include/configs/bf609-ezkit.h | 1 - include/configs/socfpga_common.h | 1 - include/configs/spear-common.h | 1 - include/configs/stv0991.h | 1 - include/configs/sunxi-common.h | 1 - include/configs/tb100.h | 1 - include/configs/x600.h | 1 - include/dm/device.h | 3 + include/net.h | 2 + include/phy.h | 23 +- net/eth.c | 78 ++++--- 84 files changed, 647 insertions(+), 124 deletions(-) delete mode 100644 configs/Linksprite_pcDuino3_fdt_defconfig create mode 100644 doc/device-tree-bindings/net/allwinner,sun4i-emac.txt create mode 100644 doc/device-tree-bindings/net/allwinner,sun4i-mdio.txt create mode 100644 doc/device-tree-bindings/net/allwinner,sun7i-a20-gmac.txt create mode 100644 doc/device-tree-bindings/net/ethernet.txt create mode 100644 doc/device-tree-bindings/net/stmmac.txt
Signature · 1 line
2.2.0.rc0.207.ga3a616c
PATCH v2 1/11 sunxi: Replace the pcDuino3 config with FDT version
We currently have Linksprite_pcDuino3 and Linksprite_pcDuino3_fdt. Drop the former in favour of the latter.
---
Changes in v2:
- Rebase on dm/next
configs/Linksprite_pcDuino3_defconfig | 7 +++++++ configs/Linksprite_pcDuino3_fdt_defconfig | 15 --------------- 2 files changed, 7 insertions(+), 15 deletions(-) delete mode 100644 configs/Linksprite_pcDuino3_fdt_defconfig
configs/Linksprite_pcDuino3_defconfig +7 -0
@@ -7,3 +7,10 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=480 CONFIG_DRAM_ZQ=122 CONFIG_DRAM_EMR1=4 +CONFIG_DM=y +CONFIG_DM_GPIO=y +CONFIG_DM_SERIAL=y +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3" +CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y +CONFIG_OF_SEPARATE=y
configs/Linksprite_pcDuino3_fdt_defconfig deleted +0 -15
@@ -1,15 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" -CONFIG_FDTFILE="sun7i-a20-pcduino3.dtb" -CONFIG_DM=y -CONFIG_DM_GPIO=y -CONFIG_DM_SERIAL=y -CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3" -CONFIG_OF_CONTROL=y -CONFIG_OF_SEPARATE=y -CONFIG_ARM=y -CONFIG_ARCH_SUNXI=y -CONFIG_MACH_SUN7I=y -CONFIG_DRAM_CLK=480 -CONFIG_DRAM_ZQ=122 -CONFIG_DRAM_EMR1=4
Signature · 1 line
2.2.0.rc0.207.ga3a616c
PATCH v2 1/11 sunxi: Replace the pcDuino3 config with FDT version
Quoted 8 lines · Simon Glass
We currently have
Linksprite_pcDuino3andLinksprite_pcDuino3_fdt. Drop the former in favour of the latter.Signed-off-by Simon Glass <[email protected]>Acked-by Hans de Goede <[email protected]>Acked-by Ian Campbell <[email protected]>---
Quoted 7 lines
Changes in v2:
- Rebase on dm/nextconfigs/Linksprite_pcDuino3_defconfig | 7 +++++++ configs/Linksprite_pcDuino3_fdt_defconfig | 15 --------------- 2 files changed, 7 insertions(+), 15 deletions(-) delete mode 100644 configs/Linksprite_pcDuino3_fdt_defconfig
Applied to u-boot-dm/next.
PATCH v2 2/11 Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig
In reply to Simon GlassMove this to Kconfig and clean up board config files that use it. Also rename it to CONFIG_ETH_DESIGNWARE to fit with the naming that exists in drivers/net/Kconfig.
Version 1:
---
Changes in v2:
- Add Ethernet for Orangepi, galileo
- Add Ethernet for Orangepi_mini, Wits_Pro_A20_DKT, Mele_I7
- Rebase on dm/next
arch/arm/cpu/arm926ejs/spear/cpu.c | 2 +- arch/arm/cpu/armv7/socfpga/misc.c | 2 +- board/bf609-ezkit/bf609-ezkit.c | 2 +- board/spear/spear300/spear300.c | 2 +- board/spear/spear310/spear310.c | 2 +- board/spear/spear320/spear320.c | 2 +- board/spear/spear600/spear600.c | 2 +- board/st/stv0991/stv0991.c | 2 +- configs/A20-OLinuXino-Lime2_defconfig | 3 +++ configs/A20-OLinuXino-Lime_defconfig | 3 +++ configs/A20-OLinuXino_MICRO_defconfig | 3 +++ configs/Bananapi_defconfig | 3 +++ configs/Bananapro_defconfig | 3 +++ configs/CSQ_CS908_defconfig | 3 +++ configs/Colombus_defconfig | 3 +++ configs/Cubieboard2_defconfig | 3 +++ configs/Cubietruck_defconfig | 3 +++ configs/Hummingbird_A31_defconfig | 3 +++ configs/Linksprite_pcDuino3_Nano_defconfig | 3 +++ configs/Linksprite_pcDuino3_defconfig | 3 +++ configs/Mele_I7_defconfig | 3 +++ configs/Mele_M3_defconfig | 3 +++ configs/Mele_M5_defconfig | 3 +++ configs/Mele_M9_defconfig | 3 +++ configs/Orangepi_defconfig | 3 +++ configs/Orangepi_mini_defconfig | 3 +++ configs/Wits_Pro_A20_DKT_defconfig | 3 +++ configs/axs101_defconfig | 5 ++++- configs/axs103_defconfig | 3 +++ configs/bf609-ezkit_defconfig | 3 +++ configs/galileo_defconfig | 3 +++ configs/i12-tvbox_defconfig | 3 +++ configs/socfpga_cyclone5_defconfig | 3 +++ configs/socfpga_socrates_defconfig | 3 +++ configs/spear300_defconfig | 3 +++ configs/spear300_nand_defconfig | 3 +++ configs/spear300_usbtty_defconfig | 3 +++ configs/spear300_usbtty_nand_defconfig | 3 +++ configs/spear310_defconfig | 3 +++ configs/spear310_nand_defconfig | 3 +++ configs/spear310_pnor_defconfig | 3 +++ configs/spear310_usbtty_defconfig | 3 +++ configs/spear310_usbtty_nand_defconfig | 3 +++ configs/spear310_usbtty_pnor_defconfig | 3 +++ configs/spear320_defconfig | 3 +++ configs/spear320_nand_defconfig | 3 +++ configs/spear320_pnor_defconfig | 3 +++ configs/spear320_usbtty_defconfig | 3 +++ configs/spear320_usbtty_nand_defconfig | 3 +++ configs/spear320_usbtty_pnor_defconfig | 3 +++ configs/spear600_defconfig | 3 +++ configs/spear600_nand_defconfig | 3 +++ configs/spear600_usbtty_defconfig | 3 +++ configs/spear600_usbtty_nand_defconfig | 3 +++ configs/stv0991_defconfig | 3 +++ configs/tb100_defconfig | 3 +++ configs/x600_defconfig | 3 +++ drivers/net/Kconfig | 7 +++++++ drivers/net/Makefile | 2 +- include/configs/axs101.h | 1 - include/configs/bf609-ezkit.h | 1 - include/configs/socfpga_common.h | 1 - include/configs/spear-common.h | 1 - include/configs/stv0991.h | 1 - include/configs/sunxi-common.h | 1 - include/configs/tb100.h | 1 - include/configs/x600.h | 1 - 67 files changed, 164 insertions(+), 18 deletions(-)
arch/arm/cpu/arm926ejs/spear/cpu.c +1 -1
@@ -32,7 +32,7 @@ int arch_cpu_init(void) periph_clk_cfg |=CONFIG_SPEAR_UART48M ;writel (periph_clk_cfg, &misc_p->periph_clk_cfg);#endif -#if defined(CONFIG_DESIGNWARE_ETH ) +#if defined(CONFIG_ETH_DESIGNWARE ) periph1_clken |=MISC_ETHENB ;#endif #if defined(CONFIG_DW_UDC )
arch/arm/cpu/armv7/socfpga/misc.c +1 -1
@@ -49,7 +49,7 @@ void enable_caches(void)/* * DesignWare Ethernet initialization */ -#ifdef CONFIG_DESIGNWARE_ETH +#ifdef CONFIG_ETH_DESIGNWARE int cpu_eth_init (bd_t *bis) {#if CONFIG_EMAC_BASE ==SOCFPGA_EMAC0_ADDRESS
board/bf609-ezkit/bf609-ezkit.c +1 -1
@@ -33,7 +33,7 @@ int board_early_init_f(void)return 0 ; } -#ifdef CONFIG_DESIGNWARE_ETH +#ifdef CONFIG_ETH_DESIGNWARE int board_eth_init (bd_t *bis) {int ret =0 ;
board/spear/spear300/spear300.c +1 -1
@@ -51,7 +51,7 @@ int board_eth_init(bd_t *bis) {int ret =0 ; -#if defined(CONFIG_DESIGNWARE_ETH ) +#if defined(CONFIG_ETH_DESIGNWARE )u32 interface =PHY_INTERFACE_MODE_MII ;if (designware_initialize (CONFIG_SPEAR_ETHBASE , interface) >=0 ) ret++;
board/spear/spear310/spear310.c +1 -1
@@ -52,7 +52,7 @@ int board_eth_init(bd_t *bis) {int ret =0 ; -#if defined(CONFIG_DESIGNWARE_ETH ) +#if defined(CONFIG_ETH_DESIGNWARE )u32 interface =PHY_INTERFACE_MODE_MII ;if (designware_initialize (CONFIG_SPEAR_ETHBASE , interface) >=0 ) ret++;
board/spear/spear320/spear320.c +1 -1
@@ -63,7 +63,7 @@ int board_eth_init(bd_t *bis) {int ret =0 ; -#if defined(CONFIG_DESIGNWARE_ETH ) +#if defined(CONFIG_ETH_DESIGNWARE )u32 interface =PHY_INTERFACE_MODE_MII ;if (designware_initialize (CONFIG_SPEAR_ETHBASE , interface) >=0 ) ret++;
board/spear/spear600/spear600.c +1 -1
@@ -46,7 +46,7 @@ int board_eth_init(bd_t *bis) {int ret =0 ; -#if defined(CONFIG_DESIGNWARE_ETH ) +#if defined(CONFIG_ETH_DESIGNWARE )u32 interface =PHY_INTERFACE_MODE_MII ;#if defined(CONFIG_DW_AUTONEG ) interface =PHY_INTERFACE_MODE_GMII ;
board/st/stv0991/stv0991.c +1 -1
@@ -94,7 +94,7 @@ int board_eth_init(bd_t *bis) {int ret =0 ; -#if defined(CONFIG_DESIGNWARE_ETH ) +#if defined(CONFIG_ETH_DESIGNWARE )u32 interface =PHY_INTERFACE_MODE_MII ;if (designware_initialize (GMAC_BASE_ADDR , interface) >=0 ) ret++;
configs/A20-OLinuXino-Lime2_defconfig +3 -0
@@ -7,3 +7,6 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=480 CONFIG_DRAM_ZQ=127 CONFIG_DRAM_EMR1=4 +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/A20-OLinuXino-Lime_defconfig +3 -0
@@ -7,3 +7,6 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=480 CONFIG_DRAM_ZQ=127 CONFIG_DRAM_EMR1=4 +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/A20-OLinuXino_MICRO_defconfig +3 -0
@@ -11,3 +11,6 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 CONFIG_DRAM_ZQ=127 CONFIG_DRAM_EMR1=4 +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/Bananapi_defconfig +3 -0
@@ -8,3 +8,6 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=127 CONFIG_DRAM_EMR1=4 +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/Bananapro_defconfig +3 -0
@@ -10,3 +10,6 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=127 CONFIG_DRAM_EMR1=4 +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/CSQ_CS908_defconfig +3 -0
@@ -13,3 +13,6 @@ CONFIG_AXP221_ALDO1_VOLT=3300 # No Vbus gpio for either usb CONFIG_USB1_VBUS_PIN="" CONFIG_USB2_VBUS_PIN="" +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/Colombus_defconfig +3 -0
@@ -10,3 +10,6 @@ CONFIG_DRAM_ZQ=251 CONFIG_AXP221_ALDO1_VOLT=3300 # No Vbus gpio for usb1 CONFIG_USB1_VBUS_PIN="" +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/Cubieboard2_defconfig +3 -0
@@ -7,3 +7,6 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=480 CONFIG_DRAM_ZQ=127 CONFIG_DRAM_EMR1=4 +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/Cubietruck_defconfig +3 -0
@@ -9,3 +9,6 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=127 CONFIG_DRAM_EMR1=4 +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/Hummingbird_A31_defconfig +3 -0
@@ -14,3 +14,6 @@ CONFIG_AXP221_ALDO1_VOLT=3300 CONFIG_USB1_VBUS_PIN="PH24" # No Vbus gpio for usb2 CONFIG_USB2_VBUS_PIN="" +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/Linksprite_pcDuino3_Nano_defconfig +3 -0
@@ -9,3 +9,6 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=408 CONFIG_DRAM_ZQ=122 CONFIG_DRAM_EMR1=4 +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/Linksprite_pcDuino3_defconfig +3 -0
@@ -14,3 +14,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3" CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_OF_SEPARATE=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/Mele_I7_defconfig +3 -0
@@ -24,3 +24,6 @@ CONFIG_AXP221_ALDO1_VOLT=3300 CONFIG_USB1_VBUS_PIN="PC27" # No Vbus gpio for usb2 CONFIG_USB2_VBUS_PIN="" +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/Mele_M3_defconfig +3 -0
@@ -10,3 +10,6 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 CONFIG_DRAM_ZQ=127 CONFIG_DRAM_EMR1=4 +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/Mele_M5_defconfig +3 -0
@@ -11,3 +11,6 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=122 CONFIG_DRAM_EMR1=4 +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/Mele_M9_defconfig +3 -0
@@ -18,3 +18,6 @@ CONFIG_AXP221_ALDO1_VOLT=3300 CONFIG_USB1_VBUS_PIN="PC27" # No Vbus gpio for usb2 CONFIG_USB2_VBUS_PIN="" +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/Orangepi_defconfig +3 -0
@@ -11,3 +11,6 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=127 CONFIG_DRAM_EMR1=4 +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/Orangepi_mini_defconfig +3 -0
@@ -13,3 +13,6 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=127 CONFIG_DRAM_EMR1=4 +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/Wits_Pro_A20_DKT_defconfig +3 -0
@@ -13,3 +13,6 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 CONFIG_DRAM_ZQ=127 CONFIG_DRAM_EMR1=4 +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/axs101_defconfig +4 -1
@@ -3,4 +3,7 @@ CONFIG_TARGET_AXS101=y CONFIG_SYS_CLK_FREQ=750000000 CONFIG_ARC_CACHE_LINE_SHIFT=5 CONFIG_SYS_DCACHE_OFF=y -CONFIG_SYS_TEXT_BASE=0x81000000 +CONFIG_SYS_TEXT_BASE=0x81000000 +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/axs103_defconfig +3 -0
@@ -3,3 +3,6 @@ CONFIG_SYS_CLK_FREQ=50000000 CONFIG_ARC=y CONFIG_ISA_ARCV2=y CONFIG_TARGET_AXS101=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/bf609-ezkit_defconfig +3 -0
@@ -1,2 +1,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF609_EZKIT=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/galileo_defconfig +3 -0
@@ -4,3 +4,6 @@ CONFIG_TARGET_GALILEO=y CONFIG_OF_CONTROL=y CONFIG_OF_SEPARATE=y CONFIG_DEFAULT_DEVICE_TREE="galileo" +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/i12-tvbox_defconfig +3 -0
@@ -7,3 +7,6 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 CONFIG_DRAM_ZQ=127 CONFIG_DRAM_EMR1=4 +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/socfpga_cyclone5_defconfig +3 -0
@@ -6,3 +6,6 @@ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socdk" CONFIG_DM=y CONFIG_DM_SPI=y CONFIG_DM_SPI_FLASH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/socfpga_socrates_defconfig +3 -0
@@ -6,3 +6,6 @@ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socrates" CONFIG_DM=y CONFIG_DM_SPI=y CONFIG_DM_SPI_FLASH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear300_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear300" CONFIG_ARM=y CONFIG_TARGET_SPEAR300=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear300_nand_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear300,nand" CONFIG_ARM=y CONFIG_TARGET_SPEAR300=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear300_usbtty_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear300,usbtty" CONFIG_ARM=y CONFIG_TARGET_SPEAR300=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear300_usbtty_nand_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear300,usbtty,nand" CONFIG_ARM=y CONFIG_TARGET_SPEAR300=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear310_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear310" CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear310_nand_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear310,nand" CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear310_pnor_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear310,FLASH_PNOR" CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear310_usbtty_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear310,usbtty" CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear310_usbtty_nand_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear310,usbtty,nand" CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear310_usbtty_pnor_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear310,usbtty,FLASH_PNOR" CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear320_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear320" CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear320_nand_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear320,nand" CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear320_pnor_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear320,FLASH_PNOR" CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear320_usbtty_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear320,usbtty" CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear320_usbtty_nand_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear320,usbtty,nand" CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear320_usbtty_pnor_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear320,usbtty,FLASH_PNOR" CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear600_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear600" CONFIG_ARM=y CONFIG_TARGET_SPEAR600=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear600_nand_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear600,nand" CONFIG_ARM=y CONFIG_TARGET_SPEAR600=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear600_usbtty_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear600,usbtty" CONFIG_ARM=y CONFIG_TARGET_SPEAR600=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/spear600_usbtty_nand_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear600,usbtty,nand" CONFIG_ARM=y CONFIG_TARGET_SPEAR600=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/stv0991_defconfig +3 -0
@@ -4,3 +4,6 @@ CONFIG_TARGET_STV0991=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_DM=y CONFIG_DM_SERIAL=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/tb100_defconfig +3 -0
@@ -3,3 +3,6 @@ CONFIG_TARGET_TB100=y CONFIG_SYS_CLK_FREQ=500000000 CONFIG_ARC_CACHE_LINE_SHIFT=5 CONFIG_SYS_TEXT_BASE=0x84000000 +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
configs/x600_defconfig +3 -0
@@ -1,3 +1,6 @@ CONFIG_SPL=y CONFIG_ARM=y CONFIG_TARGET_X600=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NETDEVICES=y +CONFIG_NET=y
drivers/net/Kconfig +7 -0
@@ -39,4 +39,11 @@ config ETH_SANDBOX_RAW network traffic to be tested from within sandbox. See board/sandbox/README.sandbox for more details. +config ETH_DESIGNWARE + bool "Synopsys Designware Ethernet MAC" + help + This MAC is present in SoCs from various vendors. It supports + 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to + provide the PHY (physical media interface). + endif # NETDEVICES
drivers/net/Makefile +1 -1
@@ -16,7 +16,7 @@ obj-$(CONFIG_BFIN_MAC) += bfin_mac.o obj-$(CONFIG_CALXEDA_XGMAC) += calxedaxgmac.o obj-$(CONFIG_CS8900) += cs8900.o obj-$(CONFIG_TULIP) += dc2114x.o -obj-$(CONFIG_DESIGNWARE_ETH) += designware.o +obj-$(CONFIG_ETH_DESIGNWARE) += designware.o obj-$(CONFIG_DRIVER_DM9000) += dm9000x.o obj-$(CONFIG_DNET) += dnet.o obj-$(CONFIG_E1000) += e1000.o
include/configs/axs101.h +0 -1
@@ -110,7 +110,6 @@/* * Ethernet configuration */ -#define CONFIG_DESIGNWARE_ETH #define CONFIG_DW_AUTONEG #define CONFIG_NET_MULTI
include/configs/bf609-ezkit.h +0 -1
@@ -71,7 +71,6 @@#define CONFIG_NETCONSOLE #define CONFIG_NET_MULTI #define CONFIG_HOSTNAME "bf609-ezkit" -#define CONFIG_DESIGNWARE_ETH #define CONFIG_PHY_ADDR 1#define CONFIG_DW_PORTS 1#define CONFIG_DW_ALTDESCRIPTOR
include/configs/socfpga_common.h +0 -1
@@ -99,7 +99,6 @@* Ethernet on SoC (EMAC) */ #if defined(CONFIG_CMD_NET ) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET ) -#define CONFIG_DESIGNWARE_ETH #define CONFIG_NET_MULTI #define CONFIG_DW_ALTDESCRIPTOR #define CONFIG_MII
include/configs/spear-common.h +0 -1
@@ -18,7 +18,6 @@/* Ethernet driver configuration */ #define CONFIG_MII -#define CONFIG_DESIGNWARE_ETH #define CONFIG_NET_MULTI #define CONFIG_PHYLIB #define CONFIG_PHY_RESET_DELAY 10000/* in usec */
include/configs/stv0991.h +0 -1
@@ -55,7 +55,6 @@#define CONFIG_MII #define CONFIG_PHYLIB #define CONFIG_CMD_NET -#define CONFIG_DESIGNWARE_ETH #define CONFIG_DW_ALTDESCRIPTOR #define CONFIG_PHY_MICREL
include/configs/sunxi-common.h +0 -1
@@ -284,7 +284,6 @@ extern int soft_i2c_gpio_scl;#endif #ifdef CONFIG_SUNXI_GMAC -#define CONFIG_DESIGNWARE_ETH /* GMAC can use designware driver */ #define CONFIG_DW_AUTONEG #define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */ #define CONFIG_PHY_ADDR 1
include/configs/tb100.h +0 -1
@@ -66,7 +66,6 @@/* * Ethernet configuration */ -#define CONFIG_DESIGNWARE_ETH #define ETH0_BASE_ADDRESS 0xFE100000#define ETH1_BASE_ADDRESS 0xFE110000
include/configs/x600.h +0 -1
@@ -74,7 +74,6 @@/* Ethernet config options */ #define CONFIG_MII -#define CONFIG_DESIGNWARE_ETH #define CONFIG_NET_MULTI #define CONFIG_PHYLIB #define CONFIG_PHY_RESET_DELAY 10000/* in usec */
Signature · 1 line
2.2.0.rc0.207.ga3a616c
PATCH v2 2/11 Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig
Quoted 6 lines · Simon Glass
Move this to
Kconfigand clean up board config files that use it. Also rename it toCONFIG_ETH_DESIGNWAREto fit with the naming that exists indrivers/net/Kconfig.Signed-off-by Simon Glass <[email protected]>Version 1:
Quoted 8 lines
Acked-by Joe Hershberger <[email protected]>---
Changes in v2:
- Add Ethernet for Orangepi, galileo
- Add Ethernet forOrangepi_mini,Wits_Pro_A20_DKT,Mele_I7
- Rebase on dm/next
Applied to u-boot-dm/next.
PATCH v2 3/11 dts: sunxi: Bring in Ethernet device tree bindings
In reply to Simon GlassSince we will use these bindings on sunxi, bring them in from Linux 4.0-rc1.
---
Changes in v2: None
.../net/allwinner,sun4i-emac.txt | 19 +++++++ .../net/allwinner,sun4i-mdio.txt | 27 ++++++++++ .../net/allwinner,sun7i-a20-gmac.txt | 27 ++++++++++ doc/device-tree-bindings/net/ethernet.txt | 25 +++++++++ doc/device-tree-bindings/net/stmmac.txt | 63 ++++++++++++++++++++++ 5 files changed, 161 insertions(+) create mode 100644 doc/device-tree-bindings/net/allwinner,sun4i-emac.txt create mode 100644 doc/device-tree-bindings/net/allwinner,sun4i-mdio.txt create mode 100644 doc/device-tree-bindings/net/allwinner,sun7i-a20-gmac.txt create mode 100644 doc/device-tree-bindings/net/ethernet.txt create mode 100644 doc/device-tree-bindings/net/stmmac.txt
doc/device-tree-bindings/net/allwinner,sun4i-emac.txt new file +19 -0
@@ -0,0 +1,19 @@ +* Allwinner EMAC ethernet controller + +Required properties: +- compatible: should be "allwinner,sun4i-a10-emac" (Deprecated: + "allwinner,sun4i-emac") +- reg: address and length of the register set for the device. +- interrupts: interrupt for the device +- phy: see ethernet.txt file in the same directory. +- clocks: A phandle to the reference clock for this device + +Example: + +emac: ethernet at 01c0b000 { + compatible = "allwinner,sun4i-a10-emac"; + reg = <0x01c0b000 0x1000>; + interrupts = <55>; + clocks = <&ahb_gates 17>; + phy = <&phy0>; +};
doc/device-tree-bindings/net/allwinner,sun4i-mdio.txt new file +27 -0
@@ -0,0 +1,27 @@ +* Allwinner A10 MDIO Ethernet Controller interface + +Required properties: +- compatible: should be "allwinner,sun4i-a10-mdio" + (Deprecated: "allwinner,sun4i-mdio"). +- reg: address and length of the register set for the device. + +Optional properties: +- phy-supply: phandle to a regulator if the PHY needs one + +Example at the SoC level: +mdio at 01c0b080 { + compatible = "allwinner,sun4i-a10-mdio"; + reg = <0x01c0b080 0x14>; + #address-cells = <1>; + #size-cells = <0>; +}; + +And at the board level: + +mdio at 01c0b080 { + phy-supply = <®_emac_3v3>; + + phy0: ethernet-phy at 0 { + reg = <0>; + }; +};
doc/device-tree-bindings/net/allwinner,sun7i-a20-gmac.txt new file +27 -0
@@ -0,0 +1,27 @@ +* Allwinner GMAC ethernet controller + +This device is a platform glue layer for stmmac. +Please see stmmac.txt for the other unchanged properties. + +Required properties: + - compatible: Should be "allwinner,sun7i-a20-gmac" + - clocks: Should contain the GMAC main clock, and tx clock + The tx clock type should be "allwinner,sun7i-a20-gmac-clk" + - clock-names: Should contain the clock names "stmmaceth", + and "allwinner_gmac_tx" + +Optional properties: +- phy-supply: phandle to a regulator if the PHY needs one + +Examples: + + gmac: ethernet at 01c50000 { + compatible = "allwinner,sun7i-a20-gmac"; + reg = <0x01c50000 0x10000>, + <0x01c20164 0x4>; + interrupts = <0 85 1>; + interrupt-names = "macirq"; + clocks = <&ahb_gates 49>, <&gmac_tx>; + clock-names = "stmmaceth", "allwinner_gmac_tx"; + phy-mode = "mii"; + };
doc/device-tree-bindings/net/ethernet.txt new file +25 -0
@@ -0,0 +1,25 @@ +The following properties are common to the Ethernet controllers: + +- local-mac-address: array of 6 bytes, specifies the MAC address that was + assigned to the network device; +- mac-address: array of 6 bytes, specifies the MAC address that was last used by + the boot program; should be used in cases where the MAC address assigned to + the device by the boot program is different from the "local-mac-address" + property; +- max-speed: number, specifies maximum speed in Mbit/s supported by the device; +- max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than + the maximum frame size (there's contradiction in ePAPR). +- phy-mode: string, operation mode of the PHY interface; supported values are + "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id", + "rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii"; this is now a de-facto + standard property; +- phy-connection-type: the same as "phy-mode" property but described in ePAPR; +- phy-handle: phandle, specifies a reference to a node representing a PHY + device; this property is described in ePAPR and so preferred; +- phy: the same as "phy-handle" property, not recommended for new bindings. +- phy-device: the same as "phy-handle" property, not recommended for new + bindings. + +Child nodes of the Ethernet controller are typically the individual PHY devices +connected via the MDIO bus (sometimes the MDIO bus controller is separate). +They are described in the phy.txt file in this same directory.
doc/device-tree-bindings/net/stmmac.txt new file +63 -0
63 lines not on this page · raw message
Signature · 1 line
2.2.0.rc0.207.ga3a616c
PATCH v2 3/11 dts: sunxi: Bring in Ethernet device tree bindings
Quoted 9 lines · Simon Glass
Since we will use these bindings on sunxi, bring them in from Linux 4.0-rc1.
Signed-off-by Simon Glass <[email protected]>Acked-by Ian Campbell <[email protected]>---
Changes in v2: None
Quoted 11 lines
.../net/allwinner,sun4i-emac.txt | 19 +++++++ .../net/allwinner,sun4i-mdio.txt | 27 ++++++++++ .../net/allwinner,sun7i-a20-gmac.txt | 27 ++++++++++ doc/device-tree-bindings/net/ethernet.txt | 25 +++++++++ doc/device-tree-bindings/net/stmmac.txt | 63 ++++++++++++++++++++++ 5 files changed, 161 insertions(+) create mode 100644 doc/device-tree-bindings/net/allwinner,sun4i-emac.txt create mode 100644 doc/device-tree-bindings/net/allwinner,sun4i-mdio.txt create mode 100644 doc/device-tree-bindings/net/allwinner,sun7i-a20-gmac.txt create mode 100644 doc/device-tree-bindings/net/ethernet.txt create mode 100644 doc/device-tree-bindings/net/stmmac.txt
Applied to u-boot-dm/next.
PATCH v2 4/11 dm: core: Support allocating driver-private data for DMA
In reply to Simon GlassSome driver want to put DMA buffers in their private data. Add a flag to tell driver model to align driver-private data to a cache boundary so that DMA will work correctly in this case.
---
This patch can be dropped once this one is applied:
http://patchwork.ozlabs.org/patch/454670/
Changes in v2: None
drivers/core/device.c | 11 ++++++++++- include/dm/device.h | 3 +++ 2 files changed, 13 insertions(+), 1 deletion(-)
drivers/core/device.c +10 -1
@@ -182,7 +182,16 @@ int device_probe_child(struct udevice *dev, void *parent_priv)/* Allocate private data if requested */ if (drv->priv_auto_alloc_size) { - dev->priv =calloc (1 , drv->priv_auto_alloc_size); +if (drv->flags &DM_FLAG_ALLOC_PRIV_DMA ) { + dev->priv =memalign (ARCH_DMA_MINALIGN , + drv->priv_auto_alloc_size); +if (dev->priv) { +memset (dev->priv,'\0' , + drv->priv_auto_alloc_size); + } + }else { + dev->priv =calloc (1 , drv->priv_auto_alloc_size); + }if (!dev->priv) { ret = -ENOMEM ; goto fail;
include/dm/device.h +3 -0
@@ -30,6 +30,9 @@ struct driver_info;/* DM is responsible for allocating and freeing parent_platdata */ #define DM_FLAG_ALLOC_PARENT_PDATA (1 << 3) +/* Allocate driver private data on a DMA boundary */ +#define DM_FLAG_ALLOC_PRIV_DMA (1 << 4) +/** * struct udevice - An instance of a driver *
Signature · 1 line
2.2.0.rc0.207.ga3a616c
PATCH v2 5/11 dm: net: Use existing Ethernet init for driver model
In reply to Simon GlassAt present even with driver model is used there is still much manual init of related devices: PHY, environment and board init. Until these requirements are dealt with in another way we need to keep them around.
Break out the init portion of the legacy eth_initialize() into a separate function and call it from both the legacy and driver model eth_initialize() functions.
---
Changes in v2: None
net/eth.c | 78 ++++++++++++++++++++++++++++++++++----------------------------- 1 file changed, 42 insertions(+), 36 deletions(-)
net/eth.c +42 -36
@@ -79,6 +79,45 @@ static int eth_mac_skip(int index)static void eth_current_changed (void ); +/* +* CPU and board-specific Ethernet initializations. Aliased function +* signals caller to move on +*/ +static int __def_eth_init (bd_t *bis) +{ +return -1 ; +} +int cpu_eth_init (bd_t *bis) __attribute__((weak,alias ("__def_eth_init" ))); +int board_eth_init (bd_t *bis) __attribute__((weak,alias ("__def_eth_init" ))); + +static void eth_common_init (void ) +{ +bootstage_mark (BOOTSTAGE_ID_NET_ETH_START ); +#if defined(CONFIG_MII ) || defined(CONFIG_CMD_MII ) || defined(CONFIG_PHYLIB ) +miiphy_init (); +#endif + +#ifdef CONFIG_PHYLIB +phy_init (); +#endif + +eth_env_init (); + +/* +* If board-specific initialization exists, call it. +* If not, call a CPU-specific one +*/ +if (board_eth_init != __def_eth_init) { +if (board_eth_init (gd->bd) <0 ) +printf ("Board Net Initialization Failed\n" ); + }else if (cpu_eth_init != __def_eth_init) { +if (cpu_eth_init (gd->bd) <0 ) +printf ("CPU Net Initialization Failed\n" ); + }else { +printf ("Net Initialization Skipped\n" ); + } +} +#ifdef CONFIG_DM_ETH /** * struct eth_device_priv - private structure for each Ethernet device
@@ -390,8 +429,7 @@ int eth_initialize(void)int num_devices =0 ;struct udevice *dev; -bootstage_mark (BOOTSTAGE_ID_NET_ETH_START ); -eth_env_init (); +eth_common_init ();/* * Devices need to write the hwaddr even if not started so that Linux
@@ -518,16 +556,6 @@ UCLASS_DRIVER(eth) = {#endif #ifndef CONFIG_DM_ETH -/* - * CPU and board-specific Ethernet initializations. Aliased function - * signals caller to move on - */ -static int __def_eth_init(bd_t *bis) -{ - return -1; -} -int cpu_eth_init(bd_t *bis) __attribute__((weak, alias("__def_eth_init"))); -int board_eth_init(bd_t *bis) __attribute__((weak, alias("__def_eth_init"))); #ifdef CONFIG_API static struct {
@@ -702,32 +730,10 @@ int eth_unregister(struct eth_device *dev)int eth_initialize (void ) {int num_devices =0 ; + eth_devices =NULL ; eth_current =NULL ; - -bootstage_mark (BOOTSTAGE_ID_NET_ETH_START ); -#if defined(CONFIG_MII ) || defined(CONFIG_CMD_MII ) || defined(CONFIG_PHYLIB ) -miiphy_init (); -#endif - -#ifdef CONFIG_PHYLIB -phy_init (); -#endif - -eth_env_init (); - -/* -* If board-specific initialization exists, call it. -* If not, call a CPU-specific one -*/ -if (board_eth_init != __def_eth_init) { -if (board_eth_init (gd->bd) <0 ) -printf ("Board Net Initialization Failed\n" ); - }else if (cpu_eth_init != __def_eth_init) { -if (cpu_eth_init (gd->bd) <0 ) -printf ("CPU Net Initialization Failed\n" ); - }else -printf ("Net Initialization Skipped\n" ); +eth_common_init ();if (!eth_devices) {puts ("No ethernet found.\n" );
Signature · 1 line
2.2.0.rc0.207.ga3a616c
PATCH v2 5/11 dm: net: Use existing Ethernet init for driver model
Quoted 8 lines · Simon Glass
At present even with driver model is used there is still much manual init of related devices: PHY, environment and board init. Until these requirements are dealt with in another way we need to keep them around.
Break out the init portion of the legacy
eth_initialize()into a separate function and call it from both the legacy and driver modeleth_initialize()functions.
Quoted 8 lines
Signed-off-by Simon Glass <[email protected]>Acked-by Joe Hershberger <[email protected]>---
Changes in v2: None
net/eth.c | 78 ++++++++++++++++++++++++++++++++++----------------------------- 1 file changed, 42 insertions(+), 36 deletions(-)
Applied to u-boot-dm/next.
PATCH v2 6/11 Avoid calling print_eths() with driver model
In reply to Simon GlassThis function is not supported with driver model.
---
Note from Joe Hershberger <[email protected]>
At this point I don't see much value in listing the Ethernet devices in bdinfo. It seems like a bit of a spurious thing to display and as such I didn't feel like rewriting it to be compatible with DM or implementing the functions bdinfo's print_eths() uses. Also, it is only supported on ARM and Microblaze. The inconsistency also led to my decision to drop it.
Changes in v2: None
common/cmd_bdinfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
common/cmd_bdinfo.c +1 -1
@@ -377,7 +377,7 @@ static int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,print_num ("-> size" , bd->bi_dram[i].size); } -#if defined(CONFIG_CMD_NET ) +#if defined(CONFIG_CMD_NET ) && !defined(CONFIG_DM_ETH )print_eths ();#endif printf ("baudrate = %u bps\n" , gd->baudrate);
Signature · 1 line
2.2.0.rc0.207.ga3a616c
PATCH v2 6/11 Avoid calling print_eths() with driver model
Quoted 13 lines · Simon Glass
This function is not supported with driver model.
Signed-off-by Simon Glass <[email protected]>Acked-by Joe Hershberger <[email protected]>---
Note from Joe Hershberger <[email protected]>At this point I don't see much value in listing the Ethernet devices in bdinfo. It seems like a bit of a spurious thing to display and as such I didn't feel like rewriting it to be compatible with DM or implementing the functions bdinfo's
print_eths()uses. Also, it is only supported on ARM and Microblaze. The inconsistency also led to my decision to drop it.
Quoted 4 lines
Changes in v2: None
common/cmd_bdinfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Applied to u-boot-dm/next.
PATCH v2 7/11 dm: net: Adjust PHY interface to work with CONFIG_DM_ETH
In reply to Simon GlassWhen driver model is used for Ethernet a few functions are passed a udevice instead of an eth_device. Also add a function to find a PHY type given its name. This will be used to decode the device tree node.
Finally, put a phy_interface field in struct eth_pdata since this is an important part of the platform data for Ethernet.
---
Changes in v2: None
common/miiphyutil.c | 1 + drivers/net/phy/phy.c | 22 ++++++++++++++++++++++ include/net.h | 2 ++ include/phy.h | 23 ++++++++++++++++++++++- 4 files changed, 47 insertions(+), 1 deletion(-)
common/miiphyutil.c +1 -0
@@ -11,6 +11,7 @@*/ #include <common.h> +#include <dm.h> #include <miiphy.h> #include <phy.h>
drivers/net/phy/phy.c +22 -0
@@ -11,6 +11,7 @@#include <config.h> #include <common.h> +#include <dm.h> #include <malloc.h> #include <net.h> #include <command.h>
@@ -754,7 +755,11 @@ struct phy_device *phy_find_by_mask(struct mii_dev *bus, unsigned phy_mask,return get_phy_device_by_mask (bus, phy_mask, interface); } +#ifdef CONFIG_DM_ETH +void phy_connect_dev(struct phy_device *phydev, struct udevice *dev) +#else void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev) +#endif {/* Soft Reset the PHY */ phy_reset (phydev);
@@ -767,8 +772,13 @@ void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev)debug ("%s connected to %s\n" , dev->name, phydev->drv->name); } +#ifdef CONFIG_DM_ETH +struct phy_device *phy_connect (struct mii_dev *bus,int addr, + struct udevice *dev, phy_interface_t interface) +#else struct phy_device *phy_connect (struct mii_dev *bus,int addr, struct eth_device *dev, phy_interface_t interface) +#endif {struct phy_device *phydev;
@@ -813,3 +823,15 @@ int phy_shutdown(struct phy_device *phydev)return 0 ; } + +int phy_get_interface_by_name (const char *str) +{ +int i; + +for (i =0 ; i <PHY_INTERFACE_MODE_COUNT ; i++) { +if (!strcmp (str, phy_interface_strings[i])) +return i; + } + +return -1 ; +}
include/net.h +2 -0
@@ -84,10 +84,12 @@ enum eth_state_t {* * @iobase: The base address of the hardware registers * @enetaddr: The Ethernet MAC address that is loaded from EEPROM or env +* @phy_interface: PHY interface to use - see PHY_INTERFACE_MODE_... */ struct eth_pdata {phys_addr_t iobase;unsigned char enetaddr[6 ]; +int phy_interface; };/**
include/phy.h +22 -1
@@ -51,7 +51,9 @@ typedef enum {PHY_INTERFACE_MODE_RGMII_TXID ,PHY_INTERFACE_MODE_RTBI ,PHY_INTERFACE_MODE_XGMII , - PHY_INTERFACE_MODE_NONE /* Must be last */ +PHY_INTERFACE_MODE_NONE ,/* Must be last */ + +PHY_INTERFACE_MODE_COUNT , } phy_interface_t; static const char *phy_interface_strings[] = {
@@ -142,7 +144,11 @@ struct phy_device {struct phy_driver *drv;void *priv; +#ifdef CONFIG_DM_ETH +struct udevice *dev; +#else struct eth_device *dev; +#endif /* forced speed & duplex (no autoneg) * partner speed & duplex & pause (autoneg)
@@ -205,10 +211,17 @@ int phy_init(void);int phy_reset (struct phy_device *phydev);struct phy_device *phy_find_by_mask (struct mii_dev *bus,unsigned phy_mask,phy_interface_t interface); +#ifdef CONFIG_DM_ETH +void phy_connect_dev (struct phy_device *phydev,struct udevice *dev); +struct phy_device *phy_connect (struct mii_dev *bus,int addr, +struct udevice *dev, +phy_interface_t interface); +#else void phy_connect_dev (struct phy_device *phydev,struct eth_device *dev);struct phy_device *phy_connect (struct mii_dev *bus,int addr,struct eth_device *dev,phy_interface_t interface); +#endif int phy_startup (struct phy_device *phydev);int phy_config (struct phy_device *phydev);int phy_shutdown (struct phy_device *phydev);
@@ -242,6 +255,14 @@ int phy_vitesse_init(void);int board_phy_config (struct phy_device *phydev); +/** +* phy_get_interface_by_name() - Look up a PHY interface name +* +* @str: PHY interface name, e.g. "mii" +* @return PHY_INTERFACE_MODE_... value, or -1 if not found +*/ +int phy_get_interface_by_name (const char *str); +/* PHY UIDs for various PHYs that are referenced in external code */ #define PHY_UID_CS4340 0x13e51002#define PHY_UID_TN2020 0x00a19410
Signature · 1 line
2.2.0.rc0.207.ga3a616c
PATCH v2 7/11 dm: net: Adjust PHY interface to work with CONFIG_DM_ETH
Quoted 11 lines · Simon Glass
When driver model is used for Ethernet a few functions are passed a udevice instead of an
eth_device. Also add a function to find a PHY type given its name. This will be used to decode the device tree node.Finally, put a
phy_interfacefield in structeth_pdatasince this is an important part of the platform data for Ethernet.Signed-off-by Simon Glass <[email protected]>Acked-by Joe Hershberger <[email protected]>---
Quoted 7 lines
Changes in v2: None
common/miiphyutil.c | 1 + drivers/net/phy/phy.c | 22 ++++++++++++++++++++++ include/net.h | 2 ++ include/phy.h | 23 ++++++++++++++++++++++- 4 files changed, 47 insertions(+), 1 deletion(-)
Applied to u-boot-dm/next.
PATCH v2 8/11 dm: net: Tidy up designware driver ready for driver model
In reply to Simon GlassAdjust the error handling to use errno.h instead of returning -1. Change leaf functions to pass in the arguments they require rather than struct eth_device. Apart from simplifying the code it makes is easier to reuse these functions for driver model, since mostly they actually only use struct dw_eth_priv (which we can keep).
Create a stub for each Ethernet operation function. This will allow use to share code with the driver model versions.
---
Changes in v2: None
drivers/net/designware.c | 87 +++++++++++++++++++++++++++++------------------- 1 file changed, 53 insertions(+), 34 deletions(-)
drivers/net/designware.c +53 -34
@@ -6,10 +6,11 @@*/ /* -* Designware ethernet IP driver for u-boot +* Designware ethernet IP driver for U-Boot */ #include <common.h> +#include <errno.h> #include <miiphy.h> #include <malloc.h> #include <linux/compiler.h>
@@ -40,7 +41,7 @@ static int dw_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)udelay (10 ); }; -return -1 ; +return -ETIMEDOUT ; } static int dw_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
@@ -49,7 +50,7 @@ static int dw_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,struct eth_mac_regs *mac_p = bus->priv;ulong start;u16 miiaddr; -int ret =-1 , timeout =CONFIG_MDIO_TIMEOUT ; +int ret = -ETIMEDOUT , timeout =CONFIG_MDIO_TIMEOUT ;writel (val, &mac_p->miidata); miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) |
@@ -69,27 +70,26 @@ static int dw_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,return ret; } -static int dw_mdio_init (char *name,struct eth_mac_regs *mac_regs_p) +static int dw_mdio_init (const char *name,struct eth_mac_regs *mac_regs_p) {struct mii_dev *bus =mdio_alloc ();if (!bus) {printf ("Failed to allocate MDIO bus\n" ); -return -1 ; +return -ENOMEM ; } bus->read = dw_mdio_read; bus->write = dw_mdio_write; -sprintf (bus->name, name); +snprintf (bus->name,sizeof (bus->name), name); bus->priv = (void *)mac_regs_p;return mdio_register (bus); } -static void tx_descs_init (struct eth_device *dev) +static void tx_descs_init (struct dw_eth_dev *priv) { -struct dw_eth_dev *priv = dev->priv;struct eth_dma_regs *dma_p = priv->dma_regs_p;struct dmamacdescr *desc_table_p = &priv->tx_mac_descrtable[0 ];char *txbuffs = &priv->txbuffs[0 ];
@@ -128,9 +128,8 @@ static void tx_descs_init(struct eth_device *dev) priv->tx_currdescnum =0 ; } -static void rx_descs_init (struct eth_device *dev) +static void rx_descs_init (struct dw_eth_dev *priv) { -struct dw_eth_dev *priv = dev->priv;struct eth_dma_regs *dma_p = priv->dma_regs_p;struct dmamacdescr *desc_table_p = &priv->rx_mac_descrtable[0 ];char *rxbuffs = &priv->rxbuffs[0 ];
@@ -170,12 +169,10 @@ static void rx_descs_init(struct eth_device *dev) priv->rx_currdescnum =0 ; } -static int dw_write_hwaddr (struct eth_device *dev) +static int _dw_write_hwaddr (struct dw_eth_dev *priv,u8 *mac_id) { -struct dw_eth_dev *priv = dev->priv;struct eth_mac_regs *mac_p = priv->mac_regs_p;u32 macid_lo, macid_hi; -u8 *mac_id = &dev->enetaddr[0 ]; macid_lo = mac_id[0 ] + (mac_id[1 ] <<8 ) + (mac_id[2 ] <<16 ) + (mac_id[3 ] <<24 );
@@ -213,9 +210,8 @@ static void dw_adjust_link(struct eth_mac_regs *mac_p, (phydev->port == PORT_FIBRE) ? ", fiber mode" : ""); } -static void dw_eth_halt (struct eth_device *dev) +static void _dw_eth_halt (struct dw_eth_dev *priv) { -struct dw_eth_dev *priv = dev->priv;struct eth_mac_regs *mac_p = priv->mac_regs_p;struct eth_dma_regs *dma_p = priv->dma_regs_p;
@@ -225,12 +221,12 @@ static void dw_eth_halt(struct eth_device *dev)phy_shutdown (priv->phydev); } -static int dw_eth_init (struct eth_device *dev,bd_t *bis) +static int _dw_eth_init (struct dw_eth_dev *priv,u8 *enetaddr) { -struct dw_eth_dev *priv = dev->priv;struct eth_mac_regs *mac_p = priv->mac_regs_p;struct eth_dma_regs *dma_p = priv->dma_regs_p;unsigned int start; +int ret;writel (readl (&dma_p->busmode) |DMAMAC_SRST , &dma_p->busmode);
@@ -238,7 +234,7 @@ static int dw_eth_init(struct eth_device *dev, bd_t *bis)while (readl (&dma_p->busmode) &DMAMAC_SRST ) {if (get_timer (start) >=CONFIG_MACRESET_TIMEOUT ) {printf ("DMA reset timeout\n" ); -return -1 ; +return -ETIMEDOUT ; }mdelay (100 );
@@ -246,10 +242,10 @@ static int dw_eth_init(struct eth_device *dev, bd_t *bis)/* Soft reset above clears HW address registers. * So we have to set it here once again */ -dw_write_hwaddr (dev); +_dw_write_hwaddr (priv, enetaddr); -rx_descs_init (dev); -tx_descs_init (dev); +rx_descs_init (priv); +tx_descs_init (priv);writel (FIXEDBURST |PRIORXTX_41 |DMA_PBL , &dma_p->busmode);
@@ -268,25 +264,25 @@ static int dw_eth_init(struct eth_device *dev, bd_t *bis)#endif /* Start up the PHY */ -if (phy_startup (priv->phydev)) { + ret =phy_startup (priv->phydev); +if (ret) {printf ("Could not initialize PHY %s\n" , priv->phydev->dev->name); -return -1 ; +return ret; }dw_adjust_link (mac_p, priv->phydev);if (!priv->phydev->link) -return -1 ; +return -EIO ;writel (readl (&mac_p->conf) |RXENABLE |TXENABLE , &mac_p->conf);return 0 ; } -static int dw_eth_send (struct eth_device *dev,void *packet,int length) +static int _dw_eth_send (struct dw_eth_dev *priv,void *packet,int length) { -struct dw_eth_dev *priv = dev->priv;struct eth_dma_regs *dma_p = priv->dma_regs_p;u32 desc_num = priv->tx_currdescnum;struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num];
@@ -309,7 +305,7 @@ static int dw_eth_send(struct eth_device *dev, void *packet, int length)/* Check if the descriptor is owned by CPU */ if (desc_p->txrx_status &DESC_TXSTS_OWNBYDMA ) {printf ("CPU not owner of tx frame\n" ); -return -1 ; +return -EPERM ; }memcpy (desc_p->dmamac_addr, packet, length);
@@ -347,9 +343,8 @@ static int dw_eth_send(struct eth_device *dev, void *packet, int length)return 0 ; } -static int dw_eth_recv (struct eth_device *dev) +static int _dw_eth_recv (struct dw_eth_dev *priv) { -struct dw_eth_dev *priv = dev->priv;u32 status, desc_num = priv->rx_currdescnum;struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num];int length =0 ;
@@ -395,9 +390,8 @@ static int dw_eth_recv(struct eth_device *dev)return length; } -static int dw_phy_init (struct eth_device *dev) +static int dw_phy_init (struct dw_eth_dev *priv,void *dev) { -struct dw_eth_dev *priv = dev->priv;struct phy_device *phydev;int mask =0xffffffff ;
@@ -407,7 +401,7 @@ static int dw_phy_init(struct eth_device *dev) phydev =phy_find_by_mask (priv->bus, mask, priv->interface);if (!phydev) -return -1 ; +return -ENODEV ;phy_connect_dev (phydev, dev);
@@ -417,7 +411,32 @@ static int dw_phy_init(struct eth_device *dev) priv->phydev = phydev;phy_config (phydev); -return 1 ; +return 0 ; +} + +static int dw_eth_init (struct eth_device *dev,bd_t *bis) +{ +return _dw_eth_init (dev->priv, dev->enetaddr); +} + +static int dw_eth_send (struct eth_device *dev,void *packet,int length) +{ +return _dw_eth_send (dev->priv, packet, length); +} + +static int dw_eth_recv (struct eth_device *dev) +{ +return _dw_eth_recv (dev->priv); +} + +static void dw_eth_halt (struct eth_device *dev) +{ +return _dw_eth_halt (dev->priv); +} + +static int dw_write_hwaddr (struct eth_device *dev) +{ +return _dw_write_hwaddr (dev->priv, dev->enetaddr); }int designware_initialize (ulong base_addr,u32 interface)
@@ -465,5 +484,5 @@ int designware_initialize(ulong base_addr, u32 interface)dw_mdio_init (dev->name, priv->mac_regs_p); priv->bus =miiphy_get_dev_by_name (dev->name); -return dw_phy_init (dev); +return dw_phy_init (priv, dev); }
Signature · 1 line
2.2.0.rc0.207.ga3a616c
PATCH v2 8/11 dm: net: Tidy up designware driver ready for driver model
Quoted 9 lines · Simon Glass
Adjust the error handling to use
errno.hinstead of returning -1. Change leaf functions to pass in the arguments they require rather than structeth_device. Apart from simplifying the code it makes is easier to reuse these functions for driver model, since mostly they actually only use structdw_eth_priv(which we can keep).Create a stub for each Ethernet operation function. This will allow use to share code with the driver model versions.
Quoted 8 lines
Signed-off-by Simon Glass <[email protected]>Acked-by Joe Hershberger <[email protected]>---
Changes in v2: None
drivers/net/designware.c | 87 +++++++++++++++++++++++++++++------------------- 1 file changed, 53 insertions(+), 34 deletions(-)
Applied to u-boot-dm/next.
PATCH v2 9/11 dm: net: Adjust designware driver to support driver model
In reply to Simon GlassAdd driver model support to the designware driver. This reuses most of the existing code except for some duplication in the probe() method.
---
Changes in v2:
- Use the new recv() method and the free_pkt() method
drivers/net/designware.c | 167 ++++++++++++++++++++++++++++++++++++++++++----- drivers/net/designware.h | 3 +- 2 files changed, 153 insertions(+), 17 deletions(-)
drivers/net/designware.c +151 -16
@@ -10,6 +10,7 @@*/ #include <common.h> +#include <dm.h> #include <errno.h> #include <miiphy.h> #include <malloc.h>
@@ -18,6 +19,8 @@#include <asm/io.h> #include "designware.h" +DECLARE_GLOBAL_DATA_PTR ; +#if !defined(CONFIG_PHYLIB )# error "DesignWare Ether MAC requires PHYLIB - missing CONFIG_PHYLIB"#endif
@@ -343,11 +346,11 @@ static int _dw_eth_send(struct dw_eth_dev *priv, void *packet, int length)return 0 ; } -static int _dw_eth_recv (struct dw_eth_dev *priv) +static int _dw_eth_recv (struct dw_eth_dev *priv,uchar **packetp) {u32 status, desc_num = priv->rx_currdescnum;struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num]; -int length =0 ; +int length = -EAGAIN ;uint32_t desc_start = (uint32_t )desc_p;uint32_t desc_end = desc_start +roundup (sizeof (*desc_p),ARCH_DMA_MINALIGN );
@@ -368,26 +371,35 @@ static int _dw_eth_recv(struct dw_eth_dev *priv)/* Invalidate received data */ data_end = data_start +roundup (length,ARCH_DMA_MINALIGN );invalidate_dcache_range (data_start, data_end); + *packetp = desc_p->dmamac_addr; + } -NetReceive (desc_p->dmamac_addr, length); +return length; +} -/* -* Make the current descriptor valid again and go to -* the next one -*/ - desc_p->txrx_status |=DESC_RXSTS_OWNBYDMA ; +static int _dw_free_pkt (struct dw_eth_dev *priv) +{ +u32 desc_num = priv->rx_currdescnum; +struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num]; +uint32_t desc_start = (uint32_t )desc_p; +uint32_t desc_end = desc_start + +roundup (sizeof (*desc_p),ARCH_DMA_MINALIGN ); -/* Flush only status field - others weren't changed */ -flush_dcache_range (desc_start, desc_end); +/* +* Make the current descriptor valid again and go to +* the next one +*/ + desc_p->txrx_status |=DESC_RXSTS_OWNBYDMA ; -/* Test the wrap-around condition. */ -if (++desc_num >=CONFIG_RX_DESCR_NUM ) - desc_num =0 ; - } +/* Flush only status field - others weren't changed */ +flush_dcache_range (desc_start, desc_end); +/* Test the wrap-around condition. */ +if (++desc_num >=CONFIG_RX_DESCR_NUM ) + desc_num =0 ; priv->rx_currdescnum = desc_num; -return length; +return 0 ; }static int dw_phy_init (struct dw_eth_dev *priv,void *dev)
@@ -414,6 +426,7 @@ static int dw_phy_init(struct dw_eth_dev *priv, void *dev)return 0 ; } +#ifndef CONFIG_DM_ETH static int dw_eth_init (struct eth_device *dev,bd_t *bis) {return _dw_eth_init (dev->priv, dev->enetaddr);
@@ -426,7 +439,17 @@ static int dw_eth_send(struct eth_device *dev, void *packet, int length)static int dw_eth_recv (struct eth_device *dev) { -return _dw_eth_recv (dev->priv); +uchar *packet; +int length; + + length =_dw_eth_recv (dev->priv, &packet); +if (length == -EAGAIN ) +return 0 ; +NetReceive (packet, length); + +_dw_free_pkt (dev->priv); + +return 0 ; }static void dw_eth_halt (struct eth_device *dev)
@@ -486,3 +509,115 @@ int designware_initialize(ulong base_addr, u32 interface)return dw_phy_init (priv, dev); } +#endif + +#ifdef CONFIG_DM_ETH +static int designware_eth_start (struct udevice *dev) +{ +struct eth_pdata *pdata =dev_get_platdata (dev); + +return _dw_eth_init (dev->priv, pdata->enetaddr); +} + +static int designware_eth_send (struct udevice *dev,void *packet,int length) +{ +struct dw_eth_dev *priv =dev_get_priv (dev); + +return _dw_eth_send (priv, packet, length); +} + +static int designware_eth_recv (struct udevice *dev,uchar **packetp) +{ +struct dw_eth_dev *priv =dev_get_priv (dev); + +return _dw_eth_recv (priv, packetp); +} + +static int designware_eth_free_pkt (struct udevice *dev,uchar *packet, +int length) +{ +struct dw_eth_dev *priv =dev_get_priv (dev); + +return _dw_free_pkt (priv); +} + +static void designware_eth_stop (struct udevice *dev) +{ +struct dw_eth_dev *priv =dev_get_priv (dev); + +return _dw_eth_halt (priv); +} + +static int designware_eth_write_hwaddr (struct udevice *dev) +{ +struct eth_pdata *pdata =dev_get_platdata (dev); +struct dw_eth_dev *priv =dev_get_priv (dev); + +return _dw_write_hwaddr (priv, pdata->enetaddr); +} + +static int designware_eth_probe (struct udevice *dev) +{ +struct eth_pdata *pdata =dev_get_platdata (dev); +struct dw_eth_dev *priv =dev_get_priv (dev); +int ret; + +debug ("%s, iobase=%lx, priv=%p\n" , __func__, pdata->iobase, priv); + priv->mac_regs_p = (struct eth_mac_regs *)pdata->iobase; + priv->dma_regs_p = (struct eth_dma_regs *)(pdata->iobase + +DW_DMA_BASE_OFFSET ); + priv->interface = pdata->phy_interface; + +dw_mdio_init (dev->name, priv->mac_regs_p); + priv->bus =miiphy_get_dev_by_name (dev->name); + + ret =dw_phy_init (priv, dev); +debug ("%s, ret=%d\n" , __func__, ret); + +return ret; +} + +static const struct eth_ops designware_eth_ops = { + .start = designware_eth_start, + .send = designware_eth_send, + .recv = designware_eth_recv, + .free_pkt = designware_eth_free_pkt, + .stop = designware_eth_stop, + .write_hwaddr = designware_eth_write_hwaddr, +}; + +static int designware_eth_ofdata_to_platdata (struct udevice *dev) +{ +struct eth_pdata *pdata =dev_get_platdata (dev); +const char *phy_mode; + + pdata->iobase =dev_get_addr (dev); + pdata->phy_interface =-1 ; + phy_mode =fdt_getprop (gd->fdt_blob, dev->of_offset,"phy-mode" ,NULL ); +if (phy_mode) + pdata->phy_interface =phy_get_interface_by_name (phy_mode); +if (pdata->phy_interface ==-1 ) { +debug ("%s: Invalid PHY interface '%s'\n" , __func__, phy_mode); +return -EINVAL ; + } + +return 0 ; +} + +static const struct udevice_id designware_eth_ids[] = { + { .compatible ="allwinner,sun7i-a20-gmac" }, + { } +}; + +U_BOOT_DRIVER (eth_sandbox) = { + .name ="eth_designware" , + .id =UCLASS_ETH , + .of_match = designware_eth_ids, + .ofdata_to_platdata = designware_eth_ofdata_to_platdata, + .probe = designware_eth_probe, + .ops = &designware_eth_ops, + .priv_auto_alloc_size =sizeof (struct dw_eth_dev ), + .platdata_auto_alloc_size =sizeof (struct eth_pdata ), + .flags =DM_FLAG_ALLOC_PRIV_DMA , +}; +#endif
drivers/net/designware.h +2 -1
@@ -228,8 +228,9 @@ struct dw_eth_dev {struct eth_mac_regs *mac_regs_p;struct eth_dma_regs *dma_regs_p; - +#ifndef CONFIG_DM_ETH struct eth_device *dev; +#endif struct phy_device *phydev;struct mii_dev *bus; };
Signature · 1 line
2.2.0.rc0.207.ga3a616c
PATCH v2 9/11 dm: net: Adjust designware driver to support driver model
Hi Simon,
Quoted 6 lines · Simon Glass
Add driver model support to the designware driver. This reuses most of the existing code except for some duplication in the
probe()method.Signed-off-by Simon Glass <[email protected]>---
Quoted 4 lines
Changes in v2:
- Use the newrecv()method and thefree_pkt()methoddrivers/net/designware.c | 167
++++++++++++++++++++++++++++++++++++++++++-----
drivers/net/designware.c static int _dw_eth_send(struct dw_eth_dev *priv,
Quoted 25 lines
drivers/net/designware.h | 3 +- 2 files changed, 153 insertions(+), 17 deletions(-)drivers/net/designware.c +3
-0@@ -10,6 +10,7 @@*/ #include <common.h> +#include <dm.h> #include <errno.h> #include <miiphy.h> #include <malloc.h> @@ -18,6 +19,8 @@#include <asm/io.h> #include "designware.h" +DECLARE_GLOBAL_DATA_PTR ; +#if !defined(CONFIG_PHYLIB )# error "DesignWare Ether MAC requires PHYLIB - missing CONFIG_PHYLIB"#endif @@ -343,11 +346,11 @@ static int _dw_eth_send(struct dw_eth_dev *priv,
void *packet, int length)
Quoted 14 lines
drivers/net/designware.c +2
-2return 0 ; } -static int _dw_eth_recv (struct dw_eth_dev *priv) +static int _dw_eth_recv (struct dw_eth_dev *priv,uchar **packetp) {u32 status, desc_num = priv->rx_currdescnum;struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num]; -int length =0 ; +int length = -EAGAIN ;uint32_t desc_start = (uint32_t )desc_p;uint32_t desc_end = desc_start +roundup (sizeof (*desc_p),ARCH_DMA_MINALIGN );
drivers/net/designware.c static int _dw_eth_recv(struct dw_eth_dev *priv) · line 372
Quoted 2 lines
drivers/net/designware.c +0
-0@@ -368,26 +371,35 @@ static int _dw_eth_recv(struct dw_eth_dev *priv)/* Invalidate received data */ data_end = data_start + roundup(length,
ARCH_DMA_MINALIGN);
drivers/net/designware.c static int _dw_eth_recv(struct dw_eth_dev *priv) · line 372
Quoted 5 lines
drivers/net/designware.c +2
-1invalidate_dcache_range (data_start, data_end); + *packetp = desc_p->dmamac_addr; + } -NetReceive (desc_p->dmamac_addr, length);
This line will conflict when http://patchwork.ozlabs.org/patch/458099/ is applied.
drivers/net/designware.c static int dw_phy_init(struct dw_eth_dev *priv, void
Quoted 42 lines
drivers/net/designware.c +20
-12+return length; +} -/* -* Make the current descriptor valid again and go to -* the next one -*/ - desc_p->txrx_status |=DESC_RXSTS_OWNBYDMA ; +static int _dw_free_pkt (struct dw_eth_dev *priv) +{ +u32 desc_num = priv->rx_currdescnum; +struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num]; +uint32_t desc_start = (uint32_t )desc_p; +uint32_t desc_end = desc_start + +roundup (sizeof (*desc_p),ARCH_DMA_MINALIGN ); -/* Flush only status field - others weren't changed */ -flush_dcache_range (desc_start, desc_end); +/* +* Make the current descriptor valid again and go to +* the next one +*/ + desc_p->txrx_status |=DESC_RXSTS_OWNBYDMA ; -/* Test the wrap-around condition. */ -if (++desc_num >=CONFIG_RX_DESCR_NUM ) - desc_num =0 ; - } +/* Flush only status field - others weren't changed */ +flush_dcache_range (desc_start, desc_end); +/* Test the wrap-around condition. */ +if (++desc_num >=CONFIG_RX_DESCR_NUM ) + desc_num =0 ; priv->rx_currdescnum = desc_num; -return length; +return 0 ; }static int dw_phy_init (struct dw_eth_dev *priv,void *dev)@@ -414,6 +426,7 @@ static int dw_phy_init(struct dw_eth_dev *priv, void
*dev)
drivers/net/designware.c static int dw_eth_send(struct eth_device *dev, void
Quoted 8 lines
drivers/net/designware.c +1
-0return 0 ; } +#ifndef CONFIG_DM_ETH static int dw_eth_init (struct eth_device *dev,bd_t *bis) {return _dw_eth_init (dev->priv, dev->enetaddr);@@ -426,7 +439,17 @@ static int dw_eth_send(struct eth_device *dev, void
*packet, int length)
drivers/net/designware.c static int dw_eth_send(struct eth_device *dev, void *packet, int length) · line 448
Quoted 11 lines
drivers/net/designware.c +7
-1static int dw_eth_recv (struct eth_device *dev) { -return _dw_eth_recv (dev->priv); +uchar *packet; +int length; + + length =_dw_eth_recv (dev->priv, &packet); +if (length == -EAGAIN ) +return 0 ; +NetReceive (packet, length);
This line will need to be updated in
http://patchwork.ozlabs.org/patch/458099/
drivers/net/designware.c int designware_initialize(ulong base_addr, u32
Quoted 8 lines
drivers/net/designware.c +4
-0+ +_dw_free_pkt (dev->priv); + +return 0 ; }static void dw_eth_halt (struct eth_device *dev)@@ -486,3 +509,115 @@ int designware_initialize(ulong base_addr, u32
interface)
Quoted 4 lines
drivers/net/designware.c +1
-0return dw_phy_init(priv, dev); } +#endif
drivers/net/designware.c int designware_initialize(ulong base_addr, u32 interface)
Quoted 10 lines
drivers/net/designware.c +10
-0+ +#ifdef CONFIG_DM_ETH +static int designware_eth_start (struct udevice *dev) +{ +struct eth_pdata *pdata =dev_get_platdata (dev); + +return _dw_eth_init (dev->priv, pdata->enetaddr); +} + +static int designware_eth_send(struct udevice *dev, void *packet, int
length)
Quoted 64 lines
drivers/net/designware.c +64
-0+{ +struct dw_eth_dev *priv =dev_get_priv (dev); + +return _dw_eth_send (priv, packet, length); +} + +static int designware_eth_recv (struct udevice *dev,uchar **packetp) +{ +struct dw_eth_dev *priv =dev_get_priv (dev); + +return _dw_eth_recv (priv, packetp); +} + +static int designware_eth_free_pkt (struct udevice *dev,uchar *packet, +int length) +{ +struct dw_eth_dev *priv =dev_get_priv (dev); + +return _dw_free_pkt (priv); +} + +static void designware_eth_stop (struct udevice *dev) +{ +struct dw_eth_dev *priv =dev_get_priv (dev); + +return _dw_eth_halt (priv); +} + +static int designware_eth_write_hwaddr (struct udevice *dev) +{ +struct eth_pdata *pdata =dev_get_platdata (dev); +struct dw_eth_dev *priv =dev_get_priv (dev); + +return _dw_write_hwaddr (priv, pdata->enetaddr); +} + +static int designware_eth_probe (struct udevice *dev) +{ +struct eth_pdata *pdata =dev_get_platdata (dev); +struct dw_eth_dev *priv =dev_get_priv (dev); +int ret; + +debug ("%s, iobase=%lx, priv=%p\n" , __func__, pdata->iobase, priv); + priv->mac_regs_p = (struct eth_mac_regs *)pdata->iobase; + priv->dma_regs_p = (struct eth_dma_regs *)(pdata->iobase + +DW_DMA_BASE_OFFSET ); + priv->interface = pdata->phy_interface; + +dw_mdio_init (dev->name, priv->mac_regs_p); + priv->bus =miiphy_get_dev_by_name (dev->name); + + ret =dw_phy_init (priv, dev); +debug ("%s, ret=%d\n" , __func__, ret); + +return ret; +} + +static const struct eth_ops designware_eth_ops = { + .start = designware_eth_start, + .send = designware_eth_send, + .recv = designware_eth_recv, + .free_pkt = designware_eth_free_pkt, + .stop = designware_eth_stop, + .write_hwaddr = designware_eth_write_hwaddr,
drivers/net/designware.c int designware_initialize(ulong base_addr, u32 interface)
Quoted 10 lines
drivers/net/designware.c +10
-0+}; + +static int designware_eth_ofdata_to_platdata (struct udevice *dev) +{ +struct eth_pdata *pdata =dev_get_platdata (dev); +const char *phy_mode; + + pdata->iobase =dev_get_addr (dev); + pdata->phy_interface =-1 ; + phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode",
NULL);
drivers/net/designware.c int designware_initialize(ulong base_addr, u32 · line 597
Quoted 2 lines
drivers/net/designware.c +2
-0+if (phy_mode) + pdata->phy_interface =
phy_get_interface_by_name(phy_mode);
drivers/net/designware.c int designware_initialize(ulong base_addr, u32 · line 599
Quoted 2 lines
drivers/net/designware.c +2
-0+if (pdata->phy_interface ==-1 ) { + debug("%s: Invalid PHY interface '%s'\n", __func__,
phy_mode);
Quoted 41 lines
drivers/net/designware.c +23
-0+ return -EINVAL; + } + +return 0 ; +} + +static const struct udevice_id designware_eth_ids[] = { + { .compatible ="allwinner,sun7i-a20-gmac" }, + { } +}; + +U_BOOT_DRIVER (eth_sandbox) = { + .name ="eth_designware" , + .id =UCLASS_ETH , + .of_match = designware_eth_ids, + .ofdata_to_platdata = designware_eth_ofdata_to_platdata, + .probe = designware_eth_probe, + .ops = &designware_eth_ops, + .priv_auto_alloc_size =sizeof (struct dw_eth_dev ), + .platdata_auto_alloc_size =sizeof (struct eth_pdata ), + .flags =DM_FLAG_ALLOC_PRIV_DMA , +}; +#endif drivers/net/designware.h +2
-2@@ -228,8 +228,9 @@ struct dw_eth_dev {struct eth_mac_regs *mac_regs_p;struct eth_dma_regs *dma_regs_p; - +#ifndef CONFIG_DM_ETH struct eth_device *dev; +#endif struct phy_device *phydev;struct mii_dev *bus; }; --2.2.0.rc0.207.ga3a616c
PATCH v2 9/11 dm: net: Adjust designware driver to support driver model
Quoted 4 lines · Joe Hershberger
Hi Simon,
Quoted 1 line · Simon Glass
Quoted 15 lines
Quoted 5 lines
Add driver model support to the designware driver. This reuses most of the existing code except for some duplication in the
probe()method.Signed-off-by Simon Glass <[email protected]>---
Acked-by Joe Hershberger <[email protected]>Quoted 7 lines
Changes in v2:
- Use the newrecv()method and thefree_pkt()methoddrivers/net/designware.c | 167 ++++++++++++++++++++++++++++++++++++++++++----- drivers/net/designware.h | 3 +- 2 files changed, 153 insertions(+), 17 deletions(-)
Applied to u-boot-dm/next.
PATCH v2 10/11 dm: sunxi: Support driver model for Ethernet
In reply to Simon GlassAdjust the Ethernet initialisation code to support driver model. It is no-longer necessary to call designware_initialize(). The device will be probed when it is used. The PHY type and GMAC base will come from the device tree.
---
Changes in v2:
- Remove unwanted printf()
board/sunxi/gmac.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
board/sunxi/gmac.c +7 -3
@@ -80,11 +80,15 @@ int sunxi_gmac_initialize(bd_t *bis)sunxi_gpio_set_cfgpin (pin,SUN6I_GPA0_GMAC );#endif -#ifdef CONFIG_RGMII +#ifdef CONFIG_DM_ETH +return 0 ; +#else +# ifdef CONFIG_RGMII return designware_initialize (SUNXI_GMAC_BASE ,PHY_INTERFACE_MODE_RGMII ); -#elif definedCONFIG_GMII +# elif definedCONFIG_GMII return designware_initialize (SUNXI_GMAC_BASE ,PHY_INTERFACE_MODE_GMII ); -#else +# else return designware_initialize (SUNXI_GMAC_BASE ,PHY_INTERFACE_MODE_MII ); +# endif #endif }
Signature · 1 line
2.2.0.rc0.207.ga3a616c
PATCH v2 10/11 dm: sunxi: Support driver model for Ethernet
Quoted 5 lines · Simon Glass
Adjust the Ethernet initialisation code to support driver model. It is no-longer necessary to call
designware_initialize(). The device will be probed when it is used. The PHY type and GMAC base will come from the device tree.
Quoted 8 lines
Signed-off-by Simon Glass <[email protected]>---
Changes in v2:
- Remove unwantedprintf()board/sunxi/gmac.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
Applied to u-boot-dm/next.
PATCH v2 11/11 dm: sunxi: Use driver model for Ethernet on Linksprite pcDuino3
In reply to Simon GlassSwitch this board over to use driver model for Ethernet.
---
Changes in v2:
- Drop bugfix patches that were incorporated in the Ethernet dm conversion
- Drop the CONFIG_BOOTP_VCI_STRING patch
configs/Linksprite_pcDuino3_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/Linksprite_pcDuino3_defconfig +1 -0
@@ -17,3 +17,4 @@ CONFIG_OF_SEPARATE=y CONFIG_ETH_DESIGNWARE=y CONFIG_NETDEVICES=y CONFIG_NET=y +CONFIG_DM_ETH=y
Signature · 1 line
2.2.0.rc0.207.ga3a616c
PATCH v2 11/11 dm: sunxi: Use driver model for Ethernet on Linksprite pcDuino3
Quoted 11 lines · Simon Glass
Switch this board over to use driver model for Ethernet.
Signed-off-by Simon Glass <[email protected]>---
Changes in v2:
- Drop bugfix patches that were incorporated in the Ethernet dm conversion
- Drop theCONFIG_BOOTP_VCI_STRINGpatchconfigs/Linksprite_pcDuino3_defconfig | 1 + 1 file changed, 1 insertion(+)
Applied to u-boot-dm/next.