Bluetooth: btbcm: Introduce generic Broadcom Bluetooth support

The majority of Broadcom Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Broadcom specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address.

---
 drivers/bluetooth/Kconfig  |  3 ++
 drivers/bluetooth/Makefile |  1 +
 drivers/bluetooth/btbcm.c  | 99 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/bluetooth/btbcm.h  | 41 +++++++++++++++++++
 4 files changed, 144 insertions(+)
 create mode 100644 drivers/bluetooth/btbcm.c
 create mode 100644 drivers/bluetooth/btbcm.h

index f8a41975c30d..4fbe067cd33a 100644
@@ -2,6 +2,9 @@
 menu "Bluetooth device drivers"
 	depends on BT
 
+config BT_BCM
+	tristate
+
 config BT_HCIBTUSB
 	tristate "HCI USB driver"
 	depends on USB

index 51f9d0c18963..51c98546fa03 100644
@@ -19,6 +19,7 @@ obj-$(CONFIG_BT_ATH3K)		+= ath3k.o
 obj-$(CONFIG_BT_MRVL)		+= btmrvl.o
 obj-$(CONFIG_BT_MRVL_SDIO)	+= btmrvl_sdio.o
 obj-$(CONFIG_BT_WILINK)		+= btwilink.o
+obj-$(CONFIG_BT_BCM)		+= btbcm.o
 
 btmrvl-y			:= btmrvl_main.o
 btmrvl-$(CONFIG_DEBUG_FS)	+= btmrvl_debugfs.o

2.1.0

Hi Marcel,

All 10 patches have been applied to bluetooth-next. Thanks.

Johan