Skip to contentSkip to conversation

x86/setup: update boot_command_line with builtin_cmdline in separate function

PATCH Superseded Alexander Kuleshov 1 participant 4 messages Apr 9, 2015 – Apr 11, 2015 x86

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 x86/setup: update boot_command_line with builtin_cmdline in separate function

This patch introduces setup_cmdline function which appends/overrides boot_command_linew with builtin_cmdline if CONFIG_CMDLINE_BOOL is set. Previously this functional was in the setup_arch, but we need to move it for getting actual command line as early as possible in the arch/x86/kernel/head{32,64}.c

---
 arch/x86/kernel/head32.c |  1 +
 arch/x86/kernel/head64.c |  1 +
 arch/x86/kernel/setup.c  | 31 ++++++++++++++++++-------------
 include/linux/init.h     |  6 +++++-
 4 files changed, 25 insertions(+), 14 deletions(-)
arch/x86/kernel/head32.c +1 -0
index 2911ef3..7ad0ad0 100644
@@ -31,6 +31,7 @@ static void __init i386_default_early_setup(void)
 
 asmlinkage __visible void __init i386_start_kernel(void)
 {
+	setup_cmdline();
 	cr4_init_shadow();
 	sanitize_boot_params(&boot_params);
 
arch/x86/kernel/head64.c +1 -0
index c4f8d46..6eea2de 100644
@@ -171,6 +171,7 @@ asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data)
 	load_idt((const struct desc_ptr *)&idt_descr);
 
 	copy_bootdata(__va(real_mode_data));
+	setup_cmdline();
 
 	/*
 	 * Load microcode early on BSP.
arch/x86/kernel/setup.c +18 -13
index 0a2421c..d578f37 100644
@@ -841,6 +841,24 @@ dump_kernel_offset(struct notifier_block *self, unsigned long v, void *p)
 }
 
 /*
+ * Append/Override boot command line with builtin command line if need
+ */
+void __init setup_cmdline(void) {
+#ifdef CONFIG_CMDLINE_BOOL
+#ifdef CONFIG_CMDLINE_OVERRIDE
+	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#else
+	if (builtin_cmdline[0]) {
+		/* append boot loader cmdline to builtin */
+		strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
+		strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+		strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+	}
+#endif
+#endif
+}
+
+/*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures
  * for initialization.  Note, the efi init code path is determined by the
@@ -968,19 +986,6 @@ void __init setup_arch(char **cmdline_p)
 	bss_resource.start = __pa_symbol(__bss_start);
 	bss_resource.end = __pa_symbol(__bss_stop)-1;
 
-#ifdef CONFIG_CMDLINE_BOOL
-#ifdef CONFIG_CMDLINE_OVERRIDE
-	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-#else
-	if (builtin_cmdline[0]) {
-		/* append boot loader cmdline to builtin */
-		strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
-		strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-		strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-	}
-#endif
-#endif
-
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
 
include/linux/init.h +5 -1
index 2df8e8d..af8f2ec 100644
@@ -152,7 +152,11 @@ void setup_arch(char **);
 void prepare_namespace(void);
 void __init load_default_modules(void);
 int __init init_rootfs(void);
-
+#ifdef CONFIG_CMDLINE_BOOL
+void __init setup_cmdline(void);
+#else
+static void __init setup_cmdline(void) {};
+#endif
 extern void (*late_time_init)(void);
 
 extern bool initcall_debug;
Signature · 1 line
2.3.3.611.g09038fc.dirty
#1 lore raw

PATCH v4 2/2 x86/earlyprintk: setup earlyprintk as early as possible

As setup_early_printk passed to the early_param, it will be usable only after 'parse_early_param' function will be called from the 'setup_arch'. So we have earlyprintk during early boot and decompression. Next point after decompression of the kernel where we can use early_printk is after call of the 'parse_early_param'.

This patch makes setup_early_printk visible for head{32,64}.c So 'early_printk' function will be usabable after decompression of the kernel and before parse_early_param will be called. It also must be safe if CONFIG_CMDLINE_BOOL and CONFIG_CMDLINE_OVERRIDE are set, because setup_cmdline function will be called before setup_early_printk.

Tested it with qemu, so early_printk() is usable and prints to serial console right after setup_early_printk function called from arch/x86/kerne/head64.c

Changes v1->v2:

* Comment added before the setup_early_printk call;
* Added information about testing to the commit message.

Changes v2->v3:

* Call setup_cmdline before setup_early_printk;
* setup_early_printk call wrapped with the setup_early_serial_console which checks that 'serial' given to the earlyprintk command line option. This prevents call of the setup_early_printk with the given pciserial/dbgp/efi, because they are using early_ioremap.

Changes v3->v4:

* Move setup_early_serial_console from the include/linux/printk.h to the arch/x86/include/asm/serial.h, because this function is only for x86 now.

---
 arch/x86/include/asm/serial.h  |  7 +++++++
 arch/x86/kernel/early_printk.c | 31 +++++++++++++++++++++++++++++--
 arch/x86/kernel/head32.c       |  5 +++++
 arch/x86/kernel/head64.c       |  9 ++++++++-
 4 files changed, 49 insertions(+), 3 deletions(-)
arch/x86/include/asm/serial.h +7 -0
index 460b84f..789e123 100644
@@ -26,4 +26,11 @@
 	{ .uart = 0,	BASE_BAUD,	0x3E8,	4,	STD_COMX_FLAGS	}, /* ttyS2 */	\
 	{ .uart = 0,	BASE_BAUD,	0x2E8,	3,	STD_COM4_FLAGS	}, /* ttyS3 */
 
+
+#ifdef CONFIG_EARLY_PRINTK
+int setup_early_serial_console(void);
+#else
+static void setup_early_serial_console(void) {};
+#endif
+
 #endif /* _ASM_X86_SERIAL_H */
arch/x86/kernel/early_printk.c +29 -2
index a62536a..6052eba 100644
@@ -11,6 +11,7 @@
 #include <asm/processor.h>
 #include <asm/fcntl.h>
 #include <asm/setup.h>
+#include <asm/serial.h>
 #include <xen/hvc-console.h>
 #include <asm/pci-direct.h>
 #include <asm/fixmap.h>
@@ -342,14 +343,16 @@ static int __init setup_early_printk(char *buf)
 	keep = (strstr(buf, "keep") != NULL);
 
 	while (*buf != '\0') {
-		if (!strncmp(buf, "serial", 6)) {
+		if (!strncmp(buf, "serial", 6) &&
+		    early_serial_console.index == -1) {
 			buf += 6;
 			early_serial_init(buf);
 			early_console_register(&early_serial_console, keep);
 			if (!strncmp(buf, ",ttyS", 5))
 				buf += 5;
 		}
-		if (!strncmp(buf, "ttyS", 4)) {
+		if (!strncmp(buf, "ttyS", 4) &&
+		    early_serial_console.index == -1) {
 			early_serial_init(buf + 4);
 			early_console_register(&early_serial_console, keep);
 		}
@@ -391,4 +394,28 @@ static int __init setup_early_printk(char *buf)
 	return 0;
 }
 
+int setup_early_serial_console() {
+#ifdef CONFIG_EARLY_PRINTK
+	char *arg;
+
+	/*
+	 * make sure that we have:
+	 *	"serial,0x3f8,115200"
+	 *	"serial,ttyS0,115200"
+	 *	"ttyS0,115200"
+	 */
+	arg = strstr(boot_command_line, "earlyprintk=serial");
+	if (!arg)
+		arg = strstr(boot_command_line, "earlyprintk=ttyS");
+	if (!arg)
+		return -1;
+
+	arg = strstr(boot_command_line, "earlyprintk=");
+	/* += strlen("earlyprintk"); */
+	arg += 12;
+
+	return setup_early_printk(arg);
+#endif
+}
+
 early_param("earlyprintk", setup_early_printk);
arch/x86/kernel/head32.c +5 -0
index 7ad0ad0..c59afe4 100644
@@ -19,6 +19,7 @@
 #include <asm/bios_ebda.h>
 #include <asm/tlbflush.h>
 #include <asm/bootparam_utils.h>
+#include <asm/serial.h>
 
 static void __init i386_default_early_setup(void)
 {
@@ -32,6 +33,10 @@ static void __init i386_default_early_setup(void)
 asmlinkage __visible void __init i386_start_kernel(void)
 {
 	setup_cmdline();
+	/* setup serial console as early as possible */
+	setup_early_serial_console();
+	early_printk("Early serial console is active\n");
+
 	cr4_init_shadow();
 	sanitize_boot_params(&boot_params);
 
arch/x86/kernel/head64.c +8 -1
index 6eea2de..129acc3 100644
@@ -28,6 +28,7 @@
 #include <asm/bootparam_utils.h>
 #include <asm/microcode.h>
 #include <asm/kasan.h>
+#include <asm/serial.h>
 
 /*
  * Manage page tables very early on.
@@ -172,12 +173,16 @@ asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data)
 
 	copy_bootdata(__va(real_mode_data));
 	setup_cmdline();
+	/* setup serial console as early as possible */
+	setup_early_serial_console();
+	early_printk("Early serial console is active\n");
 
 	/*
 	 * Load microcode early on BSP.
 	 */
 	load_ucode_bsp();
 
+
 	if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG)
 		early_printk("Kernel alive\n");
 
@@ -193,8 +198,10 @@ asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data)
 void __init x86_64_start_reservations(char *real_mode_data)
 {
 	/* version is always not zero if it is copied */
-	if (!boot_params.hdr.version)
+	if (!boot_params.hdr.version) {
 		copy_bootdata(__va(real_mode_data));
+		setup_early_serial_console();
+	}
 
 	reserve_ebda_region();
 
Signature · 1 line
2.3.3.611.g09038fc.dirty
#2 lore raw

PATCH v2 1/2 x86/setup: update boot_command_line with builtin_cmdline in separate function

In reply to Alexander Kuleshov

This patch introduces setup_cmdline function which appends/overrides boot_command_linew with builtin_cmdline if CONFIG_CMDLINE_BOOL is set. Previously this functional was in the setup_arch, but we need to move it for getting actual command line as early as possible in the arch/x86/kernel/head{32,64}.c

---
 arch/x86/kernel/head32.c |  1 +
 arch/x86/kernel/head64.c |  1 +
 arch/x86/kernel/setup.c  | 31 ++++++++++++++++++-------------
 include/linux/init.h     |  6 +++++-
 4 files changed, 25 insertions(+), 14 deletions(-)
arch/x86/kernel/head32.c +1 -0
index 2911ef3..7ad0ad0 100644
@@ -31,6 +31,7 @@ static void __init i386_default_early_setup(void)
 
 asmlinkage __visible void __init i386_start_kernel(void)
 {
+	setup_cmdline();
 	cr4_init_shadow();
 	sanitize_boot_params(&boot_params);
 
arch/x86/kernel/head64.c +1 -0
index c4f8d46..6eea2de 100644
@@ -171,6 +171,7 @@ asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data)
 	load_idt((const struct desc_ptr *)&idt_descr);
 
 	copy_bootdata(__va(real_mode_data));
+	setup_cmdline();
 
 	/*
 	 * Load microcode early on BSP.
arch/x86/kernel/setup.c +18 -13
index 0a2421c..d578f37 100644
@@ -841,6 +841,24 @@ dump_kernel_offset(struct notifier_block *self, unsigned long v, void *p)
 }
 
 /*
+ * Append/Override boot command line with builtin command line if need
+ */
+void __init setup_cmdline(void) {
+#ifdef CONFIG_CMDLINE_BOOL
+#ifdef CONFIG_CMDLINE_OVERRIDE
+	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#else
+	if (builtin_cmdline[0]) {
+		/* append boot loader cmdline to builtin */
+		strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
+		strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+		strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+	}
+#endif
+#endif
+}
+
+/*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures
  * for initialization.  Note, the efi init code path is determined by the
@@ -968,19 +986,6 @@ void __init setup_arch(char **cmdline_p)
 	bss_resource.start = __pa_symbol(__bss_start);
 	bss_resource.end = __pa_symbol(__bss_stop)-1;
 
-#ifdef CONFIG_CMDLINE_BOOL
-#ifdef CONFIG_CMDLINE_OVERRIDE
-	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-#else
-	if (builtin_cmdline[0]) {
-		/* append boot loader cmdline to builtin */
-		strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
-		strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-		strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-	}
-#endif
-#endif
-
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
 
include/linux/init.h +1 -0
index 2df8e8d..af8f2ec 100644
@@ -152,7 +152,11 @@ void setup_arch(char **);
 void prepare_namespace(void);
 void __init load_default_modules(void);
 int __init init_rootfs(void);
+void __init setup_cmdline(void);
 extern void (*late_time_init)(void);
 
 extern bool initcall_debug;
Signature · 1 line
2.3.3.611.g09038fc.dirty
#3 lore raw

PATCH v5 2/2 x86/earlyprintk: setup earlyprintk as early as possible

In reply to Alexander Kuleshov

As setup_early_printk passed to the early_param, it will be usable only after 'parse_early_param' function will be called from the 'setup_arch'. So we have earlyprintk during early boot and decompression. Next point after decompression of the kernel where we can use early_printk is after call of the 'parse_early_param'.

This patch makes setup_early_printk visible for head{32,64}.c So 'early_printk' function will be usabable after decompression of the kernel and before parse_early_param will be called. It also must be safe if CONFIG_CMDLINE_BOOL and CONFIG_CMDLINE_OVERRIDE are set, because setup_cmdline function will be called before setup_early_printk.

Tested it with qemu, so early_printk() is usable and prints to serial console right after setup_early_printk function called from arch/x86/kerne/head64.c

Changes v1->v2:

* Comment added before the setup_early_printk call;
* Added information about testing to the commit message.

Changes v2->v3:

* Call setup_cmdline before setup_early_printk;
* setup_early_printk call wrapped with the setup_early_serial_console which checks that 'serial' given to the earlyprintk command line option. This prevents call of the setup_early_printk with the given pciserial/dbgp/efi, because they are using early_ioremap.

Changes v3->v4:

* Move setup_early_serial_console from the include/linux/printk.h to the arch/x86/include/asm/serial.h, because this function is only for x86 now.

Changes v4->v5:

* Add check for console_log_level before call of the early_printk()

---
 arch/x86/include/asm/serial.h  |  7 +++++++
 arch/x86/kernel/early_printk.c | 31 +++++++++++++++++++++++++++++--
 arch/x86/kernel/head32.c       |  5 +++++
 arch/x86/kernel/head64.c       |  9 ++++++++-
 include/linux/init.h           |  4 ----
 5 files changed, 49 insertions(+), 7 deletions(-)
arch/x86/include/asm/serial.h +7 -0
index 460b84f..789e123 100644
@@ -26,4 +26,11 @@
 	{ .uart = 0,	BASE_BAUD,	0x3E8,	4,	STD_COMX_FLAGS	}, /* ttyS2 */	\
 	{ .uart = 0,	BASE_BAUD,	0x2E8,	3,	STD_COM4_FLAGS	}, /* ttyS3 */
 
+
+#ifdef CONFIG_EARLY_PRINTK
+int setup_early_serial_console(void);
+#else
+static void setup_early_serial_console(void) {};
+#endif
+
 #endif /* _ASM_X86_SERIAL_H */
arch/x86/kernel/early_printk.c +29 -2
index a62536a..6052eba 100644
@@ -11,6 +11,7 @@
 #include <asm/processor.h>
 #include <asm/fcntl.h>
 #include <asm/setup.h>
+#include <asm/serial.h>
 #include <xen/hvc-console.h>
 #include <asm/pci-direct.h>
 #include <asm/fixmap.h>
@@ -342,14 +343,16 @@ static int __init setup_early_printk(char *buf)
 	keep = (strstr(buf, "keep") != NULL);
 
 	while (*buf != '\0') {
-		if (!strncmp(buf, "serial", 6)) {
+		if (!strncmp(buf, "serial", 6) &&
+		    early_serial_console.index == -1) {
 			buf += 6;
 			early_serial_init(buf);
 			early_console_register(&early_serial_console, keep);
 			if (!strncmp(buf, ",ttyS", 5))
 				buf += 5;
 		}
-		if (!strncmp(buf, "ttyS", 4)) {
+		if (!strncmp(buf, "ttyS", 4) &&
+		    early_serial_console.index == -1) {
 			early_serial_init(buf + 4);
 			early_console_register(&early_serial_console, keep);
 		}
@@ -391,4 +394,28 @@ static int __init setup_early_printk(char *buf)
 	return 0;
 }
 
+int setup_early_serial_console() {
+#ifdef CONFIG_EARLY_PRINTK
+	char *arg;
+
+	/*
+	 * make sure that we have:
+	 *	"serial,0x3f8,115200"
+	 *	"serial,ttyS0,115200"
+	 *	"ttyS0,115200"
+	 */
+	arg = strstr(boot_command_line, "earlyprintk=serial");
+	if (!arg)
+		arg = strstr(boot_command_line, "earlyprintk=ttyS");
+	if (!arg)
+		return -1;
+
+	arg = strstr(boot_command_line, "earlyprintk=");
+	/* += strlen("earlyprintk"); */
+	arg += 12;
+
+	return setup_early_printk(arg);
+#endif
+}
+
 early_param("earlyprintk", setup_early_printk);
arch/x86/kernel/head32.c +6 -0
index 7ad0ad0..c59afe4 100644
@@ -19,6 +19,7 @@
 #include <asm/bios_ebda.h>
 #include <asm/tlbflush.h>
 #include <asm/bootparam_utils.h>
+#include <asm/serial.h>
 
 static void __init i386_default_early_setup(void)
 {
@@ -32,6 +33,11 @@ static void __init i386_default_early_setup(void)
 asmlinkage __visible void __init i386_start_kernel(void)
 {
 	setup_cmdline();
+	/* setup serial console as early as possible */
+	setup_early_serial_console();
+	if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG)
+		early_printk("Early serial console is active\n");
+
 	cr4_init_shadow();
 	sanitize_boot_params(&boot_params);
 
arch/x86/kernel/head64.c +9 -1
index 6eea2de..129acc3 100644
@@ -28,6 +28,7 @@
 #include <asm/bootparam_utils.h>
 #include <asm/microcode.h>
 #include <asm/kasan.h>
+#include <asm/serial.h>
 
 /*
  * Manage page tables very early on.
@@ -172,12 +173,17 @@ asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data)
 
 	copy_bootdata(__va(real_mode_data));
 	setup_cmdline();
+	/* setup serial console as early as possible */
+	setup_early_serial_console();
+	if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG)
+		early_printk("Early serial console is active\n");
 
 	/*
 	 * Load microcode early on BSP.
 	 */
 	load_ucode_bsp();
 
+
 	if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG)
 		early_printk("Kernel alive\n");
 
@@ -193,8 +198,10 @@ asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data)
 void __init x86_64_start_reservations(char *real_mode_data)
 {
 	/* version is always not zero if it is copied */
-	if (!boot_params.hdr.version)
+	if (!boot_params.hdr.version) {
 		copy_bootdata(__va(real_mode_data));
+		setup_early_serial_console();
+	}
 
 	reserve_ebda_region();
Signature · 1 line
2.3.3.611.g09038fc.dirty